Hi Kevin,
Are there any plans to add ARMCLANG as a build environment for this?
If so, then I can add an IAR port as well. Going from ARMCLANG to IAR is much easier than to go from GNUARM to IAR.
I have access to one of these boards so will be able to run regression tests as well.
Cheers, Thomas
Den 2020-04-29 kl. 15:03, skrev Kevin Townsend via TF-M:
Hi,
Just a quick note that support for the LPC55S69 was just merged in, allowing you to use the relatively easy to source LPCXpresso55S69-EVK dev board: https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontro...
Some notes on how to use this board with TF-M are visible here, including how to update the board to use the Segger J-Link firmware image: https://git.trustedfirmware.org/trusted-firmware-m.git/tree/platform/ext/tar...
Samples scripts for building and flashing (which assume the J-Link debug firmware is present) are available here:
https://git.trustedfirmware.org/trusted-firmware-m.git/tree/platform/ext/tar...
https://git.trustedfirmware.org/trusted-firmware-m.git/tree/platform/ext/tar...
If you find any issues with the board support, you can comment on the LPC55S69 task here: https://developer.trustedfirmware.org/T706
Best regards, Kevin Townsend
Hi Thomas,
I would like to get armclang working as well, yes, but wanted to get GNU support in ASAP since there was a lot of demand to get this board working ASAP and we needed GNU support for testing with Zephyr.
It’s on my ToDo list, though, yes, it just requires further testing before we can add it in.
I’ll send a note to the list when a change request is available.
Best regards. Kevin
On Thu, 30 Apr 2020 at 08:23, Thomas Törnblom thomas.tornblom@iar.com wrote:
Hi Kevin,
Are there any plans to add ARMCLANG as a build environment for this?
If so, then I can add an IAR port as well. Going from ARMCLANG to IAR is much easier than to go from GNUARM to IAR.
I have access to one of these boards so will be able to run regression tests as well.
Cheers, Thomas
Den 2020-04-29 kl. 15:03, skrev Kevin Townsend via TF-M:
Hi,
Just a quick note that support for the LPC55S69 was just merged in, allowing you to use the relatively easy to source LPCXpresso55S69-EVK dev board: https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontro...
Some notes on how to use this board with TF-M are visible here, including how to update the board to use the Segger J-Link firmware image: https://git.trustedfirmware.org/trusted-firmware-m.git/tree/platform/ext/tar...
Samples scripts for building and flashing (which assume the J-Link debug firmware is present) are available here:
https://git.trustedfirmware.org/trusted-firmware-m.git/tree/platform/ext/tar...
https://git.trustedfirmware.org/trusted-firmware-m.git/tree/platform/ext/tar...
If you find any issues with the board support, you can comment on the LPC55S69 task here: https://developer.trustedfirmware.org/T706
Best regards, Kevin Townsend
--
*Thomas Törnblom*, *Product Engineer* IAR Systems AB Box 23051, Strandbodgatan 1 https://www.google.com/maps/search/Strandbodgatan+1+%0D%0A++++++++++++SE?entry=gmail&source=g SE https://www.google.com/maps/search/Strandbodgatan+1+%0D%0A++++++++++++SE?entry=gmail&source=g-750 23 Uppsala, SWEDEN Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01 E-mail: thomas.tornblom@iar.com Website: www.iar.com Twitter: www.twitter.com/iarsystems
tf-m@lists.trustedfirmware.org
-
Kevin Townsend -
Thomas Törnblom