I am attempting to route FIQ timer interrupts using the ARM timers (not system timers) to EL3 in order to achieve introspection. I am running TF-A (cross compiled for AArch64/AArch32) on a Raspberry Pi 4B, which uses the Broadcom 2711 chipset. I have written some code, but I am not an embedded software engineer – I’m an IoT pentester. The ARM timers look like this:
RPI4_ARM_TIMER_LOAD 0x400 RPI4_ARM_TIMER_VALUE 0x404 ….. RPI4_ARM_TIMER_FREE_COUNTER 0x420
System timers are:
RPI4_SYS_TIMER_CLO, RPI4_SYS_TIMER_CS, etc…
I have successfully implement a Linux driver that allows me to dump kernel page tables and memory; however, I cannot see user page tables (even after running a CPU intensive program ). I believe the only way to view user page tables is to have interrupts routed to EL3 – a Linux driver is not sufficient. I have 3 UARTs attached with a debug log and screen setup. >From what I have read, the Raspberry Pi 4B uses GICv2. TF-A supports EL3 routing when the build option GICV2_GO_FOR_EL3 is enabled, which I have done.
From what I have gathered, the FIQ interrupt has to be written in assembly. So far, I have created a vector table, loaded the vector table, and masked and unmasked interrupts using daifclr, #3 and daifset, #3 instructions, using inline assembly. The timer is initinitialized and handled using C functions. I am using inline assembly, because I am adding code to the TF-A base, and I have not discovered how to add .S files to the build without receiving make errors. I will gladly share the code I have if it helps, but what I am really looking for is if anyone believes I am on the right track or not. Obviously, I am not implementing something correctly since the interrupt is not being handled. Thanks.
Thomas
Sent from Mail for Windows 10