- TF-A - lists.trustedfirmware.org

Re: [TF-A] 回复：Re: 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed

by Olivier Deprez

Hi Raghu, Yes you're right, we probably need few return code checks here and here. I may submit a patch and verify it doesn't break anything else. Hi Bin Wu, I had noticed the following sequence originating from linux sdei driver init down to TF-A: INFO: SDEI: Private events initialized on 81000100 INFO: SDEI: Private events initialized on 81000200 INFO: SDEI: Private events initialized on 81000300 INFO: SDEI: Private events initialized on 81010000 INFO: SDEI: Private events initialized on 81010100 INFO: SDEI: Private events initialized on 81010200 INFO: SDEI: Private events initialized on 81010300 INFO: SDEI: > VER INFO: SDEI: < VER:1000000000000 INFO: SDEI: > P_RESET():81000000 INFO: SDEI: < P_RESET:0 INFO: SDEI: > P_RESET():81000200 INFO: SDEI: < P_RESET:0 INFO: SDEI: > P_RESET():81000300 INFO: SDEI: < P_RESET:0 INFO: SDEI: > P_RESET():81010000 INFO: SDEI: < P_RESET:0 INFO: SDEI: > P_RESET():81010100 INFO: SDEI: < P_RESET:0 INFO: SDEI: > P_RESET():81010200 INFO: SDEI: < P_RESET:0 INFO: SDEI: > P_RESET():81010300 INFO: SDEI: < P_RESET:0 INFO: SDEI: > P_RESET():81000100 INFO: SDEI: < P_RESET:0 INFO: SDEI: > S_RESET():81000100 INFO: SDEI: < S_RESET:0 INFO: SDEI: > UNMASK:81000000 INFO: SDEI: < UNMASK:0 INFO: SDEI: > UNMASK:81000100 INFO: SDEI: < UNMASK:0 INFO: SDEI: > UNMASK:81000200 INFO: SDEI: < UNMASK:0 INFO: SDEI: > UNMASK:81000300 INFO: SDEI: < UNMASK:0 INFO: SDEI: > UNMASK:81010000 INFO: SDEI: < UNMASK:0 INFO: SDEI: > UNMASK:81010100 INFO: SDEI: < UNMASK:0 INFO: SDEI: > UNMASK:81010200 INFO: SDEI: < UNMASK:0 INFO: SDEI: > UNMASK:81010300 INFO: SDEI: < UNMASK:0 INFO: SDEI: > INFO(n:804, 0) INFO: SDEI: < INFO:0 INFO: SDEI: > INFO(n:805, 0) INFO: SDEI: < INFO:0 There is an Sdei Info request about events 804 and 805. Although I don't see any register or enable event service call, so I wonder if this demo code is missing something or expects that the platform implements such event definition natively. This does not look like flows described in https://trustedfirmware-a.readthedocs.io/en/latest/components/sdei.html for regular SDEI usage or explicit dispatch of events. Maybe we should involve Linaro ppl on the expected init sequence and dependency to TF-A (platform files). Regards, Olivier. ________________________________________ From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> on behalf of 吴斌(郅隆) via TF-A <tf-a(a)lists.trustedfirmware.org> Sent: 21 April 2020 08:45 To: TF-A; Raghu K via TF-A Subject: [TF-A] 回复：Re: 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed Hi Olivier and All, Thank you so much for your help. It makes me understand the internals. The next step, I need to check this event_num(804) register flow in kernel side, am I right? BRs， Bin Wu ------------------原始邮件 ------------------ 发件人:TF-A <tf-a-bounces(a)lists.trustedfirmware.org> 发送时间:Tue Apr 21 09:51:49 2020 收件人:Raghu K via TF-A <tf-a(a)lists.trustedfirmware.org> 主题:Re: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed Nice debug! Apart from the issue you pointed out, there is also the issue with not checking the return code. The ras handler should really be checking or panic'ing if there is an unexpected error code from spm_sp_call and sdei_dispatch_event. -Raghu On 4/20/20 2:37 PM, Olivier Deprez via TF-A wrote: > Hi Bin Wu, > > Here's an early observation. On receiving the RAS fiq interrupt the following occurs: > > ehf_el3_interrupt_handler => sgi_ras_intr_handler => spm_sp_call (enters/exit the SP to handle the injected RAS error) => sdei_dispatch_event > > se = get_event_entry(map); > if (!can_sdei_state_trans(se, DO_DISPATCH)) > return -1; > > p *map > $6 = {ev_num = 804, intr = 0, map_flags = 112, reg_count = 0, lock = {lock = 0}} > p *se > $4 = {ep = 0, arg = 0, affinity = 0, reg_flags = 0, state = 0 '\0'} > > sdei_dispatch_event exits in error at this stage, this does not seem a correct behavior. > The SDEI handler is not called in NS world and context remains unchanged. > The interrupt handler blindly returns to S-EL1 SP context at same location where it last exited. > sgi_ras_intr_handler => ehf_el3_interrupt_handler => vector_entry fiq_aarch64 => el3_exit => re-enters the SP with X0=0xC4000061 > SP then exits but the EL3 context has not been setup for SP entry leading to crash. > > IMO there is an issue around mapping SDEI event number to RAS interrupt number leading to sdei_dispatch_event exiting early. > > Regards, > Olivier. > > > ________________________________________ > From: TF-A on behalf of Matteo Carlini via TF-A > Sent: 14 April 2020 10:41 > To: 吴斌(郅隆); tf-a(a)lists.trustedfirmware.org; Thomas Abraham; Deepak Pandey > Cc: nd > Subject: Re: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed > > Looping-in Thomas & Deepak, responsible for the RD-N1 landing team platforms releases. They might be able to help. > > Thanks > Matteo > > From: TF-A On Behalf Of ??(??) via TF-A > Sent: 14 April 2020 06:47 > To: TF-A ; Raghu Krishnamurthy via TF-A > Subject: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed > > Hi RagHu, > > Really appreciate your help. > > I was downloaded this software stack from git.linaro.org. This software stack include ATF, kernel, edk2 and so on. > The user guide i used from linaro is:https://git.linaro.org/landing-teams/working/arm/arm-reference-platforms… > > 1) What platform you are running on? Can this issue be reproduced > outside your testing environment, perhaps on FVP or QEMU? > A: I am running on ARM N1-Edge FVP platform. It can reproduced on this FVP platform. > > 2) What version of TF-A and StandaloneMM is being used? Preferably the > commit-id, so that we can be sure we are looking at the same code. > A: TF-A: https://git.linaro.org/landing-teams/working/arm/arm-tf.git tag:RD-INFRA-20191024-RC0 > StandloneMM seems build from edk2 & edk2-platform. so i just put edk2 and edk2-platform version information. if anything i missed, please let me know. > edk2: https://git.linaro.org/landing-teams/working/arm/edk2.git tag:RD-INFRA-20191024-RC0 > edk2-platform: https://git.linaro.org/landing-teams/working/arm/edk2-platforms.git tag:RD-INFRA-20191024-RC0 > > 3) What version of the kernel and sdei driver is being used? > A: kernel-release: https://git.linaro.org/landing-teams/working/arm/kernel-release.git tag:RD-INFRA-20191024-RC0 > The sdei driver was included in kernel, do i need to provide sdei driver version? If need please let me know. > 4) I can't tell from looking at the log but do you know if writing 0x123 > to sde_ras_poison causes a DMC620 interrupt or an SError or external > abort through memory access ? > A: Sorry, linaro only refered it will inject the DMC-620 single-bit RAS error. So I am also not sure which exception type it will trigger. > > BRs， > Bin Wu > > ------------------原始邮件 ------------------ > 发件人:TF-A > > 发送时间:Tue Apr 14 01:25:47 2020 > 收件人:Raghu Krishnamurthy via TF-A > > 主题:Re: [TF-A] [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed > Hello, > > >>Does BL31 need to send 0xC4000061 event to BL32 again? > > I don't think it will. It is really odd that > 0xC4000061(SP_EVENT_COMPLETE_AARCH64) ever reaches the BL32/MM handler. > This is from looking at the upstream code quickly but it definitely > depends on the platform you are running, what version of TF-A you are > using, build options used. Is it possible that the unhandled exception > is occurring after successful handling of the DMC620 error but there is > a following issue that occurs right after, causing the crash? > From the register dump it looks like there was an Instruction abort > exception at address 0 while running in EL3. Something seems to have > gone seriously wrong to have 0xC4000061 ever go back to BL32 and to get > an instruction abort at address 0. > > >>Does current TF-A support to run RAS test? It seems BL31 will crash. > See above. The answer really depends on the factors mentioned above. > > The following would be helpful to know: > 1) What platform you are running on? Can this issue be reproduced > outside your testing environment, perhaps on FVP or QEMU? > 2) What version of TF-A and StandaloneMM is being used? Preferably the > commit-id, so that we can be sure we are looking at the same code. > 3) What version of the kernel and sdei driver is being used? > 4) I can't tell from looking at the log but do you know if writing 0x123 > to sde_ras_poison causes a DMC620 interrupt or an SError or external > abort through memory access ? > > Thanks > Raghu > > > On 4/13/20 12:16 AM, 吴斌(郅隆) via TF-A wrote: >> Dear Friends, >> >> I am using TF-A to test RAS feature. >> When I triggered DMC620 RAS error in Linux(echo 0x123 > >> /sys/kernel/debug/sdei_ras_poison). >> BL32 will recieve >> UnRecognized Event - 0xC4000061(SP_EVENT_COMPLETE_AARCH64) and finally >> BL31 crashed. >> >> In my understanding, this 0xC4000061 should consumed by BL31, not send >> it to BL32 again. >> >> A piece of error log as below: >> >> ************************************* >> >> CperWrite - CperAddress@0xFF610064 >> CperWrite - 1 Section@FFBE91A8, Length 80, SectionType@FFBE9138 >> CperWrite - Got Error Section: Platform Memory. >> MmEntryPoint Done >> Received delegated event >> X0 : 0xC4000061 >> X1 : 0x0 >> X2 : 0x0 >> X3 : 0x0 >> Received event - 0xC4000061 on cpu 0 >> UnRecognized Event - 0xC4000061 >> Failed delegated event 0xC4000061, Status 0x2 >> Unhandled Exception in EL3. >> x30 = 0x0000000000000000 >> x0 = 0x00000000ff007e00 >> x1 = 0xfffffffffffffffe >> x2 = 0x00000000600003c0 >> x3 = 0x0000000000000000 >> x4 = 0x0000000000000000 >> x5 = 0x0000000000000000 >> x6 = 0x00000000ff015080 >> x7 = 0x0000000000000000 >> x8 = 0x00000000c4000061 >> x9 = 0x0000000000000021 >> x10 = 0x0000000000000040 >> x11 = 0x00000000ff00f2b0 >> x12 = 0x00000000ff0118c0 >> x13 = 0x0000000000000002 >> x14 = 0x00000000ff016b70 >> x15 = 0x00000000ff003f20 >> x16 = 0x0000000000000044 >> x17 = 0x00000000ff010430 >> x18 = 0x0000000000000e3c >> x19 = 0x0000000000000000 >> More error log please refer to attachment. >> >> My question is, >> 1. Does BL31 need to send 0xC4000061 event to BL32 again? >> 2. Does current TF-A support to run RAS test? It seems BL31 will crash. >> >> Appreciate your help. >> >> BRs， >> Bin Wu >> > -- > TF-A mailing list > TF-A(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/tf-a -- TF-A mailing list TF-A(a)lists.trustedfirmware.org https://lists.trustedfirmware.org/mailman/listinfo/tf-a IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years

1
0
0 0

TF-A Tech Forum Agenda @ Thr 23rd Apr 2020 17:00-1800 BST

by Joanna Farley

Hi All, The next TF-A Tech Forum is scheduled for Thu 23rd Apr 2020 17:00 - 18:00 (BST). A reoccurring meeting invite has been sent out to the subscribers of this TF-A mailing list. If you don’t have this please let me know. Agenda: * Overview of the TF-A v2.3 Release by Bipin Ravi and Mark Dykes * Project Maintenance Proposal for tf.org Projects discussion * Optional TF-A Mailing List Topic Discussions Thanks Joanna IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years

1
0
0 0

Re: [TF-A] [RFC] isolation between runtime BL33 services and OS

by Soby Mathew

> -----Original Message----- > From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> On Behalf Of François > Ozog via TF-A > Sent: 20 April 2020 16:25 > To: Achin Gupta <Achin.Gupta(a)arm.com> > Cc: tf-a(a)lists.trustedfirmware.org > Subject: Re: [TF-A] [RFC] isolation between runtime BL33 services and OS > > On Mon, 20 Apr 2020 at 15:50, Achin Gupta <achin.gupta(a)arm.com> wrote: > > > > On Mon, Apr 20, 2020 at 03:37:23PM +0200, François Ozog wrote: > > > On Mon, 20 Apr 2020 at 15:27, Achin Gupta <[1]achin.gupta(a)arm.com> > > > wrote: > > > > > > Hi Francois, > > > On Mon, Apr 20, 2020 at 11:45:02AM +0000, Fran ois Ozog via TF-A > > > wrote: > > > > Hi, > > > > > > > > I am trying to identify a mechanism to enforce a form of two-way > > > > isolation between BL33 runtime services in OS, for instance: > > > > - a pair of 2MB areas that could be RO by one entity and RW by the > > > other > > > > - an execute only BL33 2MB area? > > > Stupid Q! Are you referring to isolation between EFI runtime > > > services and the > > > OS? > > > It is not clear what you mean by BL33 runtime services? > > > > > > Not a stupid Q. I concentrate effectively on EFI runtime but more > > > generally this is the non-trusted firmware component that delivers > > > runtime services to OS. > > > (My flow is somewhat convoluted: TFA loads minimal Linux as BL33, Linux > > > kexecs a UEFI reduced U-Boot (without drivers) which bootefi the > > > distro). > > > > Thanks! I see and IIUC, this is about two separately provisioned SW > > components that share an EL (EL1 in this case) at the same time in the > > same image. We want component A to have permission X on a memory > > region and component B to have permission Y on the same memory region. > > If so, then this would require a cooperation between the two components? > > > Yes. Well cooperation is what happens today: Component A (UEFI compliant > FW) tells component B not to use memory it occupies. > I wish an EL(+n) component to make that a guarantee. Yet I don't want to > have "virtualization". > > > I might be still missing the obvious but I am wondering how a SW > > entity at a higher EL (Hypervisor in EL2 or TF-A in EL3) could create > > and enforce the separation between the two components. It would not > > have visibility of what is happening inside the EL at the very least. > > I hoped that by installing a page mapping "power play", we could enforce > some policy. > Performance here is not important because those data and context changes > seldomly happen. > I assume components A and B have a different mapping for the same "physical > page": > - EL1_A(VA)-> IA1; EL1_B(VA)->IA2 > - EL2(IA1) -> PA (RW), EL2(IA2)->PA(RO) or "not present" > A collaboration between UEFI FW and EL2/3 would allow that to happen. > A call to UEFI runtime service from SystemTable would result in a swap of > TTBR1 (from EL1_B to EL1_A) so that execution can continue in UEFI. > (I have no solution, just trying to check if we can find one). > HI Francois, What you suggest is possible AFAICS, as you suggest, if you create 2 IPAs with corresponding VAs. Communication between the 2 would involve some shared memory and invoking EL2 to trigger the switch between the VAs. This is suited more for an EL2 design I think rather than EL3. Best Regards Soby Mathew > > > > cheers, > > Achin > > > > > > > > cheers, > > > Achin > > > > > > > > This is similar to hypervisor except it only deals with memory, no > > > > vCPU, no GIC virtualization... > > > > > > > > Could EL3 or EL2 install protective mappings ? BL33 could ask > > > either > > > > EL2 hypervisor or SecureMonitor to actually install them. > > > > > > > > Cordially, > > > > > > > > FF > > > > -- > > > > TF-A mailing list > > > > [2]TF-A(a)lists.trustedfirmware.org > > > > [3]https://lists.trustedfirmware.org/mailman/listinfo/tf-a > > > IMPORTANT NOTICE: The contents of this email and any attachments > are > > > confidential and may also be privileged. If you are not the intended > > > recipient, please notify the sender immediately and do not disclose > > > the contents to any other person, use it for any purpose, or store > > > or copy the information in any medium. Thank you. > > > > > > -- > > > [uc?id=0BxTAygkus3RgQVhuNHMwUi1mYWc&export=download] > > > Fran ois-Fr d ric Ozog | Director Linaro Edge & Fog Computing Group > > > T: +33.67221.6485 > > > [4]francois.ozog(a)linaro.org | Skype: ffozog > > > > > > References > > > > > > 1. mailto:achin.gupta@arm.com > > > 2. mailto:TF-A@lists.trustedfirmware.org > > > 3. https://lists.trustedfirmware.org/mailman/listinfo/tf-a > > > 4. mailto:francois.ozog@linaro.org > > IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended recipient, > please notify the sender immediately and do not disclose the contents to any > other person, use it for any purpose, or store or copy the information in any > medium. Thank you. > > > > -- > François-Frédéric Ozog | Director Linaro Edge & Fog Computing Group > T: +33.67221.6485 > francois.ozog(a)linaro.org | Skype: ffozog > -- > TF-A mailing list > TF-A(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/tf-a IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years

1
0
0 0

回复：Re: 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed

by 吴斌(郅隆)

Hi Olivier and All, Thank you so much for your help. It makes me understand the internals. The next step, I need to check this event_num(804) register flow in kernel side, am I right? BRs， Bin Wu ------------------原始邮件 ------------------ 发件人:TF-A <tf-a-bounces(a)lists.trustedfirmware.org> 发送时间:Tue Apr 21 09:51:49 2020 收件人:Raghu K via TF-A <tf-a(a)lists.trustedfirmware.org> 主题:Re: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed Nice debug! Apart from the issue you pointed out, there is also the issue with not checking the return code. The ras handler should really be checking or panic'ing if there is an unexpected error code from spm_sp_call and sdei_dispatch_event. -Raghu On 4/20/20 2:37 PM, Olivier Deprez via TF-A wrote: > Hi Bin Wu, > > Here's an early observation. On receiving the RAS fiq interrupt the following occurs: > > ehf_el3_interrupt_handler => sgi_ras_intr_handler => spm_sp_call (enters/exit the SP to handle the injected RAS error) => sdei_dispatch_event > > se = get_event_entry(map); > if (!can_sdei_state_trans(se, DO_DISPATCH)) > return -1; > > p *map > $6 = {ev_num = 804, intr = 0, map_flags = 112, reg_count = 0, lock = {lock = 0}} > p *se > $4 = {ep = 0, arg = 0, affinity = 0, reg_flags = 0, state = 0 '\0'} > > sdei_dispatch_event exits in error at this stage, this does not seem a correct behavior. > The SDEI handler is not called in NS world and context remains unchanged. > The interrupt handler blindly returns to S-EL1 SP context at same location where it last exited. > sgi_ras_intr_handler => ehf_el3_interrupt_handler => vector_entry fiq_aarch64 => el3_exit => re-enters the SP with X0=0xC4000061 > SP then exits but the EL3 context has not been setup for SP entry leading to crash. > > IMO there is an issue around mapping SDEI event number to RAS interrupt number leading to sdei_dispatch_event exiting early. > > Regards, > Olivier. > > > ________________________________________ > From: TF-A on behalf of Matteo Carlini via TF-A > Sent: 14 April 2020 10:41 > To: 吴斌(郅隆); tf-a(a)lists.trustedfirmware.org; Thomas Abraham; Deepak Pandey > Cc: nd > Subject: Re: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed > > Looping-in Thomas & Deepak, responsible for the RD-N1 landing team platforms releases. They might be able to help. > > Thanks > Matteo > > From: TF-A On Behalf Of ??(??) via TF-A > Sent: 14 April 2020 06:47 > To: TF-A ; Raghu Krishnamurthy via TF-A > Subject: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed > > Hi RagHu, > > Really appreciate your help. > > I was downloaded this software stack from git.linaro.org. This software stack include ATF, kernel, edk2 and so on. > The user guide i used from linaro is:https://git.linaro.org/landing-teams/working/arm/arm-reference-platforms… > > 1) What platform you are running on? Can this issue be reproduced > outside your testing environment, perhaps on FVP or QEMU? > A: I am running on ARM N1-Edge FVP platform. It can reproduced on this FVP platform. > > 2) What version of TF-A and StandaloneMM is being used? Preferably the > commit-id, so that we can be sure we are looking at the same code. > A: TF-A: https://git.linaro.org/landing-teams/working/arm/arm-tf.git tag:RD-INFRA-20191024-RC0 > StandloneMM seems build from edk2 & edk2-platform. so i just put edk2 and edk2-platform version information. if anything i missed, please let me know. > edk2: https://git.linaro.org/landing-teams/working/arm/edk2.git tag:RD-INFRA-20191024-RC0 > edk2-platform: https://git.linaro.org/landing-teams/working/arm/edk2-platforms.git tag:RD-INFRA-20191024-RC0 > > 3) What version of the kernel and sdei driver is being used? > A: kernel-release: https://git.linaro.org/landing-teams/working/arm/kernel-release.git tag:RD-INFRA-20191024-RC0 > The sdei driver was included in kernel, do i need to provide sdei driver version? If need please let me know. > 4) I can't tell from looking at the log but do you know if writing 0x123 > to sde_ras_poison causes a DMC620 interrupt or an SError or external > abort through memory access ? > A: Sorry, linaro only refered it will inject the DMC-620 single-bit RAS error. So I am also not sure which exception type it will trigger. > > BRs， > Bin Wu > > ------------------原始邮件 ------------------ > 发件人:TF-A > > 发送时间:Tue Apr 14 01:25:47 2020 > 收件人:Raghu Krishnamurthy via TF-A > > 主题:Re: [TF-A] [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed > Hello, > > >>Does BL31 need to send 0xC4000061 event to BL32 again? > > I don't think it will. It is really odd that > 0xC4000061(SP_EVENT_COMPLETE_AARCH64) ever reaches the BL32/MM handler. > This is from looking at the upstream code quickly but it definitely > depends on the platform you are running, what version of TF-A you are > using, build options used. Is it possible that the unhandled exception > is occurring after successful handling of the DMC620 error but there is > a following issue that occurs right after, causing the crash? > From the register dump it looks like there was an Instruction abort > exception at address 0 while running in EL3. Something seems to have > gone seriously wrong to have 0xC4000061 ever go back to BL32 and to get > an instruction abort at address 0. > > >>Does current TF-A support to run RAS test? It seems BL31 will crash. > See above. The answer really depends on the factors mentioned above. > > The following would be helpful to know: > 1) What platform you are running on? Can this issue be reproduced > outside your testing environment, perhaps on FVP or QEMU? > 2) What version of TF-A and StandaloneMM is being used? Preferably the > commit-id, so that we can be sure we are looking at the same code. > 3) What version of the kernel and sdei driver is being used? > 4) I can't tell from looking at the log but do you know if writing 0x123 > to sde_ras_poison causes a DMC620 interrupt or an SError or external > abort through memory access ? > > Thanks > Raghu > > > On 4/13/20 12:16 AM, 吴斌(郅隆) via TF-A wrote: >> Dear Friends, >> >> I am using TF-A to test RAS feature. >> When I triggered DMC620 RAS error in Linux(echo 0x123 > >> /sys/kernel/debug/sdei_ras_poison). >> BL32 will recieve >> UnRecognized Event - 0xC4000061(SP_EVENT_COMPLETE_AARCH64) and finally >> BL31 crashed. >> >> In my understanding, this 0xC4000061 should consumed by BL31, not send >> it to BL32 again. >> >> A piece of error log as below: >> >> ************************************* >> >> CperWrite - CperAddress@0xFF610064 >> CperWrite - 1 Section@FFBE91A8, Length 80, SectionType@FFBE9138 >> CperWrite - Got Error Section: Platform Memory. >> MmEntryPoint Done >> Received delegated event >> X0 : 0xC4000061 >> X1 : 0x0 >> X2 : 0x0 >> X3 : 0x0 >> Received event - 0xC4000061 on cpu 0 >> UnRecognized Event - 0xC4000061 >> Failed delegated event 0xC4000061, Status 0x2 >> Unhandled Exception in EL3. >> x30 = 0x0000000000000000 >> x0 = 0x00000000ff007e00 >> x1 = 0xfffffffffffffffe >> x2 = 0x00000000600003c0 >> x3 = 0x0000000000000000 >> x4 = 0x0000000000000000 >> x5 = 0x0000000000000000 >> x6 = 0x00000000ff015080 >> x7 = 0x0000000000000000 >> x8 = 0x00000000c4000061 >> x9 = 0x0000000000000021 >> x10 = 0x0000000000000040 >> x11 = 0x00000000ff00f2b0 >> x12 = 0x00000000ff0118c0 >> x13 = 0x0000000000000002 >> x14 = 0x00000000ff016b70 >> x15 = 0x00000000ff003f20 >> x16 = 0x0000000000000044 >> x17 = 0x00000000ff010430 >> x18 = 0x0000000000000e3c >> x19 = 0x0000000000000000 >> More error log please refer to attachment. >> >> My question is, >> 1. Does BL31 need to send 0xC4000061 event to BL32 again? >> 2. Does current TF-A support to run RAS test? It seems BL31 will crash. >> >> Appreciate your help. >> >> BRs， >> Bin Wu >> > -- > TF-A mailing list > TF-A(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/tf-a -- TF-A mailing list TF-A(a)lists.trustedfirmware.org https://lists.trustedfirmware.org/mailman/listinfo/tf-a

5 years

1
0
0 0

Re: [TF-A] Event Log for Measured Boot

by Soby Mathew

My view is that smaller patches are easier to review and we should try to break up the patches to logical chucks where possible. I haven't taken a look at the patches myself but I am sure there will be ways to break it up for ease of review. Best Regards Soby Mathew > -----Original Message----- > From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> On Behalf Of Raghu > Krishnamurthy via TF-A > Sent: 20 April 2020 18:09 > To: Alexei Fedorov <Alexei.Fedorov(a)arm.com>; tf-a(a)lists.trustedfirmware.org > Subject: Re: [TF-A] Event Log for Measured Boot > > Fair enough. I have no doubt it was tested. It is just extremely difficult to review > such patches and I disagree with your statement. > There is almost always a way to split patches up by using feature flags for > example, that will help with not breaking the build. You can test them all > together once you have all the patches. I also think it is perfectly reasonable to > say measured boot cannot be turned on until a certain commit id present. > However, if you think this is the right approach, i have no issues. > > Thanks > Raghu > > On 4/20/20 8:44 AM, Alexei Fedorov wrote: > > Hi Raghu and Varun, > > > > This patch is a complete, tested and verified reference implementation > > for FVP platform. > > Splitting it will create a set of separate non-buildable patches > > causing more complexity in following and understanding the code > > changes and dependencies. > > The whole patch with all the code present in it should be reviewed > > anyway, and the time spent will be less than the time used for > > reviewing separate patches (mass defect). > > > > Alexei > > > > ---------------------------------------------------------------------- > > -- > > *From:* TF-A <tf-a-bounces(a)lists.trustedfirmware.org> on behalf of > > Raghu Krishnamurthy via TF-A <tf-a(a)lists.trustedfirmware.org> > > *Sent:* 02 April 2020 05:11 > > *To:* tf-a(a)lists.trustedfirmware.org <tf-a(a)lists.trustedfirmware.org> > > *Subject:* Re: [TF-A] Event Log for Measured Boot Hi Alexei, > > > > I second Varun on this. The patch is huge. I recommend breaking it up > > into multiple commits. I've reviewed it but since it is a large patch, > > it might require a few more sittings to grasp all the changes(which > > also means there may be some stupid review comments :)). > > > > -Raghu > > > > On 3/31/20 10:28 AM, Varun Wadekar via TF-A wrote: > >> Hello Alexei, > >> > >> Just curious, the patch is huge and will take some time to review. Do > >> you expect this change to be merged before the v2.3 release? > >> > >> -Varun > >> > >> *From:* TF-A <tf-a-bounces(a)lists.trustedfirmware.org> *On Behalf Of > >> *Alexei Fedorov via TF-A > >> *Sent:* Tuesday, March 31, 2020 7:19 AM > >> *To:* tf-a(a)lists.trustedfirmware.org > >> *Subject:* [TF-A] Event Log for Measured Boot > >> > >> *External email: Use caution opening links or attachments* > >> > >> Hi, > >> > >> Please review and provide your comments for the patch which adds > >> > >> Event Log generation for the Measured Boot. > >> > >> https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3806 > >> > >> Thanks. > >> > >> Alexei > >> > >> IMPORTANT NOTICE: The contents of this email and any attachments are > >> confidential and may also be privileged. If you are not the intended > >> recipient, please notify the sender immediately and do not disclose > >> the contents to any other person, use it for any purpose, or store or > >> copy the information in any medium. Thank you. > >> > >> --------------------------------------------------------------------- > >> --- This email message is for the sole use of the intended > >> recipient(s) and may contain confidential information. Any > >> unauthorized review, use, disclosure or distribution is prohibited. > >> If you are not the intended recipient, please contact the sender by > >> reply email and destroy all copies of the original message. > >> --------------------------------------------------------------------- > >> --- > >> > > -- > > TF-A mailing list > > TF-A(a)lists.trustedfirmware.org > > https://lists.trustedfirmware.org/mailman/listinfo/tf-a > > IMPORTANT NOTICE: The contents of this email and any attachments are > > confidential and may also be privileged. If you are not the intended > > recipient, please notify the sender immediately and do not disclose > > the contents to any other person, use it for any purpose, or store or > > copy the information in any medium. Thank you. > -- > TF-A mailing list > TF-A(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/tf-a IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years

1
0
0 0

Re: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed

by Raghu K

Nice debug! Apart from the issue you pointed out, there is also the issue with not checking the return code. The ras handler should really be checking or panic'ing if there is an unexpected error code from spm_sp_call and sdei_dispatch_event. -Raghu On 4/20/20 2:37 PM, Olivier Deprez via TF-A wrote: > Hi Bin Wu, > > Here's an early observation. On receiving the RAS fiq interrupt the following occurs: > > ehf_el3_interrupt_handler => sgi_ras_intr_handler => spm_sp_call (enters/exit the SP to handle the injected RAS error) => sdei_dispatch_event > > se = get_event_entry(map); > if (!can_sdei_state_trans(se, DO_DISPATCH)) > return -1; > > p *map > $6 = {ev_num = 804, intr = 0, map_flags = 112, reg_count = 0, lock = {lock = 0}} > p *se > $4 = {ep = 0, arg = 0, affinity = 0, reg_flags = 0, state = 0 '\0'} > > sdei_dispatch_event exits in error at this stage, this does not seem a correct behavior. > The SDEI handler is not called in NS world and context remains unchanged. > The interrupt handler blindly returns to S-EL1 SP context at same location where it last exited. > sgi_ras_intr_handler => ehf_el3_interrupt_handler => vector_entry fiq_aarch64 => el3_exit => re-enters the SP with X0=0xC4000061 > SP then exits but the EL3 context has not been setup for SP entry leading to crash. > > IMO there is an issue around mapping SDEI event number to RAS interrupt number leading to sdei_dispatch_event exiting early. > > Regards, > Olivier. > > > ________________________________________ > From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> on behalf of Matteo Carlini via TF-A <tf-a(a)lists.trustedfirmware.org> > Sent: 14 April 2020 10:41 > To: 吴斌(郅隆); tf-a(a)lists.trustedfirmware.org; Thomas Abraham; Deepak Pandey > Cc: nd > Subject: Re: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed > > Looping-in Thomas & Deepak, responsible for the RD-N1 landing team platforms releases. They might be able to help. > > Thanks > Matteo > > From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> On Behalf Of ??(??) via TF-A > Sent: 14 April 2020 06:47 > To: TF-A <tf-a-bounces(a)lists.trustedfirmware.org>; Raghu Krishnamurthy via TF-A <tf-a(a)lists.trustedfirmware.org> > Subject: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed > > Hi RagHu, > > Really appreciate your help. > > I was downloaded this software stack from git.linaro.org. This software stack include ATF, kernel, edk2 and so on. > The user guide i used from linaro is:https://git.linaro.org/landing-teams/working/arm/arm-reference-platforms… > > 1) What platform you are running on? Can this issue be reproduced > outside your testing environment, perhaps on FVP or QEMU? > A: I am running on ARM N1-Edge FVP platform. It can reproduced on this FVP platform. > > 2) What version of TF-A and StandaloneMM is being used? Preferably the > commit-id, so that we can be sure we are looking at the same code. > A: TF-A: https://git.linaro.org/landing-teams/working/arm/arm-tf.git tag:RD-INFRA-20191024-RC0 > StandloneMM seems build from edk2 & edk2-platform. so i just put edk2 and edk2-platform version information. if anything i missed, please let me know. > edk2: https://git.linaro.org/landing-teams/working/arm/edk2.git<https://git.linaro.org/landing-teams/working/arm/edk2.git/> tag:RD-INFRA-20191024-RC0 > edk2-platform: https://git.linaro.org/landing-teams/working/arm/edk2-platforms.git<https://git.linaro.org/landing-teams/working/arm/edk2-platforms.git/> tag:RD-INFRA-20191024-RC0 > > 3) What version of the kernel and sdei driver is being used? > A: kernel-release: https://git.linaro.org/landing-teams/working/arm/kernel-release.git tag:RD-INFRA-20191024-RC0 > The sdei driver was included in kernel, do i need to provide sdei driver version? If need please let me know. > 4) I can't tell from looking at the log but do you know if writing 0x123 > to sde_ras_poison causes a DMC620 interrupt or an SError or external > abort through memory access ? > A: Sorry, linaro only refered it will inject the DMC-620 single-bit RAS error. So I am also not sure which exception type it will trigger. > > BRs， > Bin Wu > > ------------------原始邮件 ------------------ > 发件人:TF-A <tf-a-bounces(a)lists.trustedfirmware.org<mailto:tf-a-bounces@lists.trustedfirmware.org>> > 发送时间:Tue Apr 14 01:25:47 2020 > 收件人:Raghu Krishnamurthy via TF-A <tf-a(a)lists.trustedfirmware.org<mailto:tf-a@lists.trustedfirmware.org>> > 主题:Re: [TF-A] [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed > Hello, > > >>Does BL31 need to send 0xC4000061 event to BL32 again? > > I don't think it will. It is really odd that > 0xC4000061(SP_EVENT_COMPLETE_AARCH64) ever reaches the BL32/MM handler. > This is from looking at the upstream code quickly but it definitely > depends on the platform you are running, what version of TF-A you are > using, build options used. Is it possible that the unhandled exception > is occurring after successful handling of the DMC620 error but there is > a following issue that occurs right after, causing the crash? > From the register dump it looks like there was an Instruction abort > exception at address 0 while running in EL3. Something seems to have > gone seriously wrong to have 0xC4000061 ever go back to BL32 and to get > an instruction abort at address 0. > > >>Does current TF-A support to run RAS test? It seems BL31 will crash. > See above. The answer really depends on the factors mentioned above. > > The following would be helpful to know: > 1) What platform you are running on? Can this issue be reproduced > outside your testing environment, perhaps on FVP or QEMU? > 2) What version of TF-A and StandaloneMM is being used? Preferably the > commit-id, so that we can be sure we are looking at the same code. > 3) What version of the kernel and sdei driver is being used? > 4) I can't tell from looking at the log but do you know if writing 0x123 > to sde_ras_poison causes a DMC620 interrupt or an SError or external > abort through memory access ? > > Thanks > Raghu > > > On 4/13/20 12:16 AM, 吴斌(郅隆) via TF-A wrote: >> Dear Friends, >> >> I am using TF-A to test RAS feature. >> When I triggered DMC620 RAS error in Linux(echo 0x123 > >> /sys/kernel/debug/sdei_ras_poison). >> BL32 will recieve >> UnRecognized Event - 0xC4000061(SP_EVENT_COMPLETE_AARCH64) and finally >> BL31 crashed. >> >> In my understanding, this 0xC4000061 should consumed by BL31, not send >> it to BL32 again. >> >> A piece of error log as below: >> >> ************************************* >> >> CperWrite - CperAddress@0xFF610064 >> CperWrite - 1 Section@FFBE91A8, Length 80, SectionType@FFBE9138 >> CperWrite - Got Error Section: Platform Memory. >> MmEntryPoint Done >> Received delegated event >> X0 : 0xC4000061 >> X1 : 0x0 >> X2 : 0x0 >> X3 : 0x0 >> Received event - 0xC4000061 on cpu 0 >> UnRecognized Event - 0xC4000061 >> Failed delegated event 0xC4000061, Status 0x2 >> Unhandled Exception in EL3. >> x30 = 0x0000000000000000 >> x0 = 0x00000000ff007e00 >> x1 = 0xfffffffffffffffe >> x2 = 0x00000000600003c0 >> x3 = 0x0000000000000000 >> x4 = 0x0000000000000000 >> x5 = 0x0000000000000000 >> x6 = 0x00000000ff015080 >> x7 = 0x0000000000000000 >> x8 = 0x00000000c4000061 >> x9 = 0x0000000000000021 >> x10 = 0x0000000000000040 >> x11 = 0x00000000ff00f2b0 >> x12 = 0x00000000ff0118c0 >> x13 = 0x0000000000000002 >> x14 = 0x00000000ff016b70 >> x15 = 0x00000000ff003f20 >> x16 = 0x0000000000000044 >> x17 = 0x00000000ff010430 >> x18 = 0x0000000000000e3c >> x19 = 0x0000000000000000 >> More error log please refer to attachment. >> >> My question is, >> 1. Does BL31 need to send 0xC4000061 event to BL32 again? >> 2. Does current TF-A support to run RAS test? It seems BL31 will crash. >> >> Appreciate your help. >> >> BRs， >> Bin Wu >> > -- > TF-A mailing list > TF-A(a)lists.trustedfirmware.org<mailto:TF-A@lists.trustedfirmware.org> > https://lists.trustedfirmware.org/mailman/listinfo/tf-a

5 years

1
0
0 0

Re: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed

by Olivier.Deprez＠arm.com

Hi Bin Wu, Here's an early observation. On receiving the RAS fiq interrupt the following occurs: ehf_el3_interrupt_handler => sgi_ras_intr_handler => spm_sp_call (enters/exit the SP to handle the injected RAS error) => sdei_dispatch_event se = get_event_entry(map); if (!can_sdei_state_trans(se, DO_DISPATCH)) return -1; p *map $6 = {ev_num = 804, intr = 0, map_flags = 112, reg_count = 0, lock = {lock = 0}} p *se $4 = {ep = 0, arg = 0, affinity = 0, reg_flags = 0, state = 0 '\0'} sdei_dispatch_event exits in error at this stage, this does not seem a correct behavior. The SDEI handler is not called in NS world and context remains unchanged. The interrupt handler blindly returns to S-EL1 SP context at same location where it last exited. sgi_ras_intr_handler => ehf_el3_interrupt_handler => vector_entry fiq_aarch64 => el3_exit => re-enters the SP with X0=0xC4000061 SP then exits but the EL3 context has not been setup for SP entry leading to crash. IMO there is an issue around mapping SDEI event number to RAS interrupt number leading to sdei_dispatch_event exiting early. Regards, Olivier. ________________________________________ From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> on behalf of Matteo Carlini via TF-A <tf-a(a)lists.trustedfirmware.org> Sent: 14 April 2020 10:41 To: 吴斌(郅隆); tf-a(a)lists.trustedfirmware.org; Thomas Abraham; Deepak Pandey Cc: nd Subject: Re: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed Looping-in Thomas & Deepak, responsible for the RD-N1 landing team platforms releases. They might be able to help. Thanks Matteo From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> On Behalf Of ??(??) via TF-A Sent: 14 April 2020 06:47 To: TF-A <tf-a-bounces(a)lists.trustedfirmware.org>; Raghu Krishnamurthy via TF-A <tf-a(a)lists.trustedfirmware.org> Subject: [TF-A] 回复：Re: [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed Hi RagHu, Really appreciate your help. I was downloaded this software stack from git.linaro.org. This software stack include ATF, kernel, edk2 and so on. The user guide i used from linaro is:https://git.linaro.org/landing-teams/working/arm/arm-reference-platforms… 1) What platform you are running on? Can this issue be reproduced outside your testing environment, perhaps on FVP or QEMU? A: I am running on ARM N1-Edge FVP platform. It can reproduced on this FVP platform. 2) What version of TF-A and StandaloneMM is being used? Preferably the commit-id, so that we can be sure we are looking at the same code. A: TF-A: https://git.linaro.org/landing-teams/working/arm/arm-tf.git tag:RD-INFRA-20191024-RC0 StandloneMM seems build from edk2 & edk2-platform. so i just put edk2 and edk2-platform version information. if anything i missed, please let me know. edk2: https://git.linaro.org/landing-teams/working/arm/edk2.git<https://git.linaro.org/landing-teams/working/arm/edk2.git/> tag:RD-INFRA-20191024-RC0 edk2-platform: https://git.linaro.org/landing-teams/working/arm/edk2-platforms.git<https://git.linaro.org/landing-teams/working/arm/edk2-platforms.git/> tag:RD-INFRA-20191024-RC0 3) What version of the kernel and sdei driver is being used? A: kernel-release: https://git.linaro.org/landing-teams/working/arm/kernel-release.git tag:RD-INFRA-20191024-RC0 The sdei driver was included in kernel, do i need to provide sdei driver version? If need please let me know. 4) I can't tell from looking at the log but do you know if writing 0x123 to sde_ras_poison causes a DMC620 interrupt or an SError or external abort through memory access ? A: Sorry, linaro only refered it will inject the DMC-620 single-bit RAS error. So I am also not sure which exception type it will trigger. BRs， Bin Wu ------------------原始邮件 ------------------ 发件人:TF-A <tf-a-bounces(a)lists.trustedfirmware.org<mailto:tf-a-bounces@lists.trustedfirmware.org>> 发送时间:Tue Apr 14 01:25:47 2020 收件人:Raghu Krishnamurthy via TF-A <tf-a(a)lists.trustedfirmware.org<mailto:tf-a@lists.trustedfirmware.org>> 主题:Re: [TF-A] [RAS] BL32 UnRecognized Event - 0xC4000061 and BL31 Crashed Hello, >>Does BL31 need to send 0xC4000061 event to BL32 again? I don't think it will. It is really odd that 0xC4000061(SP_EVENT_COMPLETE_AARCH64) ever reaches the BL32/MM handler. This is from looking at the upstream code quickly but it definitely depends on the platform you are running, what version of TF-A you are using, build options used. Is it possible that the unhandled exception is occurring after successful handling of the DMC620 error but there is a following issue that occurs right after, causing the crash? From the register dump it looks like there was an Instruction abort exception at address 0 while running in EL3. Something seems to have gone seriously wrong to have 0xC4000061 ever go back to BL32 and to get an instruction abort at address 0. >>Does current TF-A support to run RAS test? It seems BL31 will crash. See above. The answer really depends on the factors mentioned above. The following would be helpful to know: 1) What platform you are running on? Can this issue be reproduced outside your testing environment, perhaps on FVP or QEMU? 2) What version of TF-A and StandaloneMM is being used? Preferably the commit-id, so that we can be sure we are looking at the same code. 3) What version of the kernel and sdei driver is being used? 4) I can't tell from looking at the log but do you know if writing 0x123 to sde_ras_poison causes a DMC620 interrupt or an SError or external abort through memory access ? Thanks Raghu On 4/13/20 12:16 AM, 吴斌(郅隆) via TF-A wrote: > Dear Friends, > > I am using TF-A to test RAS feature. > When I triggered DMC620 RAS error in Linux(echo 0x123 > > /sys/kernel/debug/sdei_ras_poison). > BL32 will recieve > UnRecognized Event - 0xC4000061(SP_EVENT_COMPLETE_AARCH64) and finally > BL31 crashed. > > In my understanding, this 0xC4000061 should consumed by BL31, not send > it to BL32 again. > > A piece of error log as below: > > ************************************* > > CperWrite - CperAddress@0xFF610064 > CperWrite - 1 Section@FFBE91A8, Length 80, SectionType@FFBE9138 > CperWrite - Got Error Section: Platform Memory. > MmEntryPoint Done > Received delegated event > X0 : 0xC4000061 > X1 : 0x0 > X2 : 0x0 > X3 : 0x0 > Received event - 0xC4000061 on cpu 0 > UnRecognized Event - 0xC4000061 > Failed delegated event 0xC4000061, Status 0x2 > Unhandled Exception in EL3. > x30 = 0x0000000000000000 > x0 = 0x00000000ff007e00 > x1 = 0xfffffffffffffffe > x2 = 0x00000000600003c0 > x3 = 0x0000000000000000 > x4 = 0x0000000000000000 > x5 = 0x0000000000000000 > x6 = 0x00000000ff015080 > x7 = 0x0000000000000000 > x8 = 0x00000000c4000061 > x9 = 0x0000000000000021 > x10 = 0x0000000000000040 > x11 = 0x00000000ff00f2b0 > x12 = 0x00000000ff0118c0 > x13 = 0x0000000000000002 > x14 = 0x00000000ff016b70 > x15 = 0x00000000ff003f20 > x16 = 0x0000000000000044 > x17 = 0x00000000ff010430 > x18 = 0x0000000000000e3c > x19 = 0x0000000000000000 > More error log please refer to attachment. > > My question is, > 1. Does BL31 need to send 0xC4000061 event to BL32 again? > 2. Does current TF-A support to run RAS test? It seems BL31 will crash. > > Appreciate your help. > > BRs， > Bin Wu > -- TF-A mailing list TF-A(a)lists.trustedfirmware.org<mailto:TF-A@lists.trustedfirmware.org> https://lists.trustedfirmware.org/mailman/listinfo/tf-a

5 years

1
0
0 0

Trusted Firmware-A & TF-A tests version 2.3 is now available

by Bipin Ravi

Hi all, Trusted Firmware-A and TF-A tests version 2.3 is now available and can be found here: TF-A: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tag/?h=v2.3 TF-A-tests: https://git.trustedfirmware.org/TF-A/tf-a-tests.git/tag/?h=v2.3 Please refer to the readme and change log for further information. Thanks & best regards, [cid:image001.jpg@01D6170F.64702DF0] Bipin Ravi | Principal Design Engineer Bipin.Ravi(a)arm.com<mailto:Bipin.Ravi@arm.com> | Mobile: +1-214-212-0794 5707 Southwest Parkway, Suite 100, Austin, TX 78735

5 years

1
0
0 0

Re: [TF-A] Event Log for Measured Boot

by Alexei Fedorov

Hi Raghu and Varun, This patch is a complete, tested and verified reference implementation for FVP platform. Splitting it will create a set of separate non-buildable patches causing more complexity in following and understanding the code changes and dependencies. The whole patch with all the code present in it should be reviewed anyway, and the time spent will be less than the time used for reviewing separate patches (mass defect). Alexei ________________________________ From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> on behalf of Raghu Krishnamurthy via TF-A <tf-a(a)lists.trustedfirmware.org> Sent: 02 April 2020 05:11 To: tf-a(a)lists.trustedfirmware.org <tf-a(a)lists.trustedfirmware.org> Subject: Re: [TF-A] Event Log for Measured Boot Hi Alexei, I second Varun on this. The patch is huge. I recommend breaking it up into multiple commits. I've reviewed it but since it is a large patch, it might require a few more sittings to grasp all the changes(which also means there may be some stupid review comments :)). -Raghu On 3/31/20 10:28 AM, Varun Wadekar via TF-A wrote: > Hello Alexei, > > Just curious, the patch is huge and will take some time to review. Do > you expect this change to be merged before the v2.3 release? > > -Varun > > *From:* TF-A <tf-a-bounces(a)lists.trustedfirmware.org> *On Behalf Of > *Alexei Fedorov via TF-A > *Sent:* Tuesday, March 31, 2020 7:19 AM > *To:* tf-a(a)lists.trustedfirmware.org > *Subject:* [TF-A] Event Log for Measured Boot > > *External email: Use caution opening links or attachments* > > Hi, > > Please review and provide your comments for the patch which adds > > Event Log generation for the Measured Boot. > > https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3806 > > Thanks. > > Alexei > > IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy > the information in any medium. Thank you. > > ------------------------------------------------------------------------ > This email message is for the sole use of the intended recipient(s) and > may contain confidential information. Any unauthorized review, use, > disclosure or distribution is prohibited. If you are not the intended > recipient, please contact the sender by reply email and destroy all > copies of the original message. > ------------------------------------------------------------------------ > -- TF-A mailing list TF-A(a)lists.trustedfirmware.org https://lists.trustedfirmware.org/mailman/listinfo/tf-a IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years

2
1
0 0

Re: [TF-A] [RFC] isolation between runtime BL33 services and OS

by Olivier.Deprez＠arm.com

Hi, If buffers are to be consumed by NWd only, it's probably better to contain the isolation at NS-EL2 (through Stage-2 MMU mapping). Though from your statements I'm not clear if you wish to use an hypervisor, or not? If yes, which implementation or kind do you want to use? If not, I wonder if you could re-use OS facilities like shared mem with different permissions for two child processes (might be tricky)? I don't think execute-only regions exist in Cortex-A (unless implementing additional hardware). If executable it's probably also readable. Maybe you meant execute-never? Regards, Olivier. ________________________________________ From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> on behalf of François Ozog via TF-A <tf-a(a)lists.trustedfirmware.org> Sent: 20 April 2020 13:45 To: tf-a(a)lists.trustedfirmware.org Subject: [TF-A] [RFC] isolation between runtime BL33 services and OS Hi, I am trying to identify a mechanism to enforce a form of two-way isolation between BL33 runtime services in OS, for instance: - a pair of 2MB areas that could be RO by one entity and RW by the other - an execute only BL33 2MB area? This is similar to hypervisor except it only deals with memory, no vCPU, no GIC virtualization... Could EL3 or EL2 install protective mappings ? BL33 could ask either EL2 hypervisor or SecureMonitor to actually install them. Cordially, FF -- TF-A mailing list TF-A(a)lists.trustedfirmware.org https://lists.trustedfirmware.org/mailman/listinfo/tf-a

5 years

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

TF-A