- TF-A - lists.trustedfirmware.org

by Arunachalam Ganapathy

Hi All, Please review the patch-set that adds the functionality in RMM to manage Scalable Matrix Extension (SME) context. If the CPU supports SME and if Realm accesses FPU/SVE functionality then NS SME state is saved to allow Realm to use FPU/SVE register state. https://review.trustedfirmware.org/q/topic:%22rmm_sme%22+(status:open%20OR%… Brief summary of changes made in different components: RMM: - Introduces SIMD context and exports APIs to the runtime component of RMM to initialize, save, restore, and switch SIMD context. - Adds SME support in RMM to manage NS SME context. Supports SVE+SME config and SME only config. - Handles SVE hint bit passed in RMI SMCs - Handles SME exceptions from Realms https://review.trustedfirmware.org/q/topic:%22rmm_sme%22+(status:open%20OR%… TF-A: - Enables FEAT_SME for RMM - Passes SMCCCv1.3 SVE hint bit in SMC function ID to RMM tf-a-tests: - There are changes in common lib routines for sve, sme so that testcases running in NS-EL2, S-EL1, R-EL1 can use these helper routines. - Adds helper routines to read, write, compare FPU and SVE Z, P, FFR registers - Adds SMCCCv1.3 SVE hint bit support in TFTF framework - Enables SME/SME2 during arch init - Adds SME helper routines and extends SVE lib routines to support streaming SVE mode. https://review.trustedfirmware.org/q/topic:%22rmm_sme%22+(status:open%20OR%… Thanks, Arun

2 years, 2 months

1
0
0 0

Console scope flags/ console switch state - understanding

by Michal Simek

Hi, I am looking at how console flags are used and setup. In porting guide I see Function : bl31_plat_runtime_setup() [optional] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ :: Argument : void Return : void The purpose of this function is allow the platform to perform any BL31 runtime setup just prior to BL31 exit during cold boot. The default weak implementation of this function will invoke ``console_switch_state()`` to switch console output to consoles marked for use in the ``runtime`` state. Some platform are calling it but some of them not (like our Xilinx one). Tegra has in tegra_pwr_domain_power_down_wfi() console_flush(); console_switch_state(0); which is what none other has. Should console_flush() be called by default all the time when console is switched and also disabled when system goes down? Why console_switch_state(CONSOLE_FLAG_RUNTIME) is not called from bl31_main() when before bl31_plat_runtime_setup() is called we have console_flush() already? The second part of this how console scope is setup. Implementation is clear and set. void console_set_scope(console_t *console, unsigned int scope) { assert(console != NULL); console->flags = (console->flags & ~CONSOLE_FLAG_SCOPE_MASK) | scope; } The commit cc5859ca19ff ("Multi-console: Deprecate the `finish_console_register` macro") when finish_console_register is called (DCC is exception here) is setting up CONSOLE_FLAG_BOOT and CONSOLE_FLAG_CRASH by default. And most of platforms is calling console registration with calling console_set_scope() where new flags are recorded BOOT only, BOOT/RUNTIME, RUNTIME only or BOOT/RUNTIME/CRASH. I would like to understand what should be the right behavior. Why are platforms removing CRASH flag after registration? (I see that a lot of platforms are having private plat_crash_console_init() but pretty much crash console is the same with regular console). Why runtime console is setup directly in bl31_early_platform_setup2 when guidance is saying that it should be done much later? Also commit 63c52d0071ef ("plat/common/crash_console_helpers.S: Fix MULTI_CONSOLE_API support") removed CONSOLE_FLAG_CRASH from plat_crash_console_init but only from 64bit version. In 32bit version there is still there. It suggest that any C code should be called. Do we really need CONSOLE_FLAG_CRASH? Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs

2 years, 2 months

4
5
0 0

Re: Invitation: TF-A Tech Forum @ Every 2 weeks from 16:00 to 17:00 on Thursday (BST) (tf-a@lists.trustedfirmware.org)

by Olivier Deprez

Hi, The TF-A Tech Forum instance on Sep 21st 2023 is cancelled due to lack of topic. Thanks & Regards, Olivier. ________________________________ From: Trusted Firmware Public Meetings Sent: 14 June 2020 19:21 To: Trusted Firmware Public Meetings <linaro.org_havjv2figrh5egaiurb229pd8c(a)group.calendar.google.com>; tf-a(a)lists.trustedfirmware.org <tf-a(a)lists.trustedfirmware.org> Subject: [TF-A] Invitation: TF-A Tech Forum @ Every 2 weeks from 16:00 to 17:00 on Thursday (BST) (tf-a(a)lists.trustedfirmware.org) When: 21 September 2023 17:00-18:00. Where: You have been invited to the following event. TF-A Tech Forum When Every 2 weeks from 16:00 to 17:00 on Thursday United Kingdom Time Calendar tf-a(a)lists.trustedfirmware.org Who • Bill Fletcher- creator • tf-a(a)lists.trustedfirmware.org more details »<https://www.google.com/calendar/event?action=VIEW&eid=NWlub3Ewdm1tMmk1cTJrM…> We run an open technical forum call for anyone to participate and it is not restricted to Trusted Firmware project members. It will operate under the guidance of the TF TSC. Feel free to forward this invite to colleagues. Invites are via the TF-A mailing list and also published on the Trusted Firmware website. Details are here: https://www.trustedfirmware.org/meetings/tf-a-technical-forum/<https://www.google.com/url?q=https%3A%2F%2Fwww.trustedfirmware.org%2Fmeetin…> Trusted Firmware is inviting you to a scheduled Zoom meeting. Join Zoom Meeting https://zoom.us/j/9159704974<https://www.google.com/url?q=https%3A%2F%2Fzoom.us%2Fj%2F9159704974&sa=D&us…> Meeting ID: 915 970 4974 One tap mobile +16465588656,,9159704974# US (New York) +16699009128,,9159704974# US (San Jose) Dial by your location +1 646 558 8656 US (New York) +1 669 900 9128 US (San Jose) 877 853 5247 US Toll-free 888 788 0099 US Toll-free Meeting ID: 915 970 4974 Find your local number: https://zoom.us/u/ad27hc6t7h<https://www.google.com/url?q=https%3A%2F%2Fzoom.us%2Fu%2Fad27hc6t7h&sa=D&us…> Going (tf-a(a)lists.trustedfirmware.org)? All events in this series: Yes<https://www.google.com/calendar/event?action=RESPOND&eid=NWlub3Ewdm1tMmk1cT…> - Maybe<https://www.google.com/calendar/event?action=RESPOND&eid=NWlub3Ewdm1tMmk1cT…> - No<https://www.google.com/calendar/event?action=RESPOND&eid=NWlub3Ewdm1tMmk1cT…> more options »<https://www.google.com/calendar/event?action=VIEW&eid=NWlub3Ewdm1tMmk1cTJrM…> Invitation from Google Calendar<https://www.google.com/calendar/> You are receiving this courtesy email at the account tf-a(a)lists.trustedfirmware.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively, you can sign up for a Google Account at https://www.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to send a response to the organiser and be added to the guest list, invite others regardless of their own invitation status or to modify your RSVP. Learn more<https://support.google.com/calendar/answer/37135#forwarding>.

2 years, 2 months

1
0
0 0

Canceled event with note: TF-A Tech Forum @ Thu Sep 21, 2023 5pm - 6pm (CEST) (tf-a@lists.trustedfirmware.org)

by olivier.deprez＠arm.com

This event has been canceled with a note: "Hi, The TF-A Tech Forum instance on Sep 21st 2023 is cancelled due to lack of topic. Thanks & Regards, Olivier. " TF-A Tech Forum Thursday Sep 21, 2023 ⋅ 5pm – 6pm Central European Time - Paris We run an open technical forum call for anyone to participate and it is not restricted to Trusted Firmware project members. It will operate under the guidance of the TF TSC. Feel free to forward this invite to colleagues. Invites are via the TF-A mailing list and also published on the Trusted Firmware website. Details are here: https://www.trustedfirmware.org/meetings/tf-a-technical-forum/Tr… Firmware is inviting you to a scheduled Zoom meeting.Join Zoom Meetinghttps://zoom.us/j/9159704974Meeting ID: 915 970 4974One tap mobile+16465588656,,9159704974# US (New York)+16699009128,,9159704974# US (San Jose)Dial by your location        +1 646 558 8656 US (New York)        +1 669 900 9128 US (San Jose)        877 853 5247 US Toll-free        888 788 0099 US Toll-freeMeeting ID: 915 970 4974Find your local number: https://zoom.us/u/ad27hc6t7h   Guests marek.bykowski(a)gmail.com okash.khawaja(a)gmail.com tf-a(a)lists.trustedfirmware.org ~~//~~ Invitation from Google Calendar: https://calendar.google.com/calendar/ You are receiving this email because you are an attendee on the event. To stop receiving future updates for this event, decline this event. Forwarding this invitation could allow any recipient to send a response to the organizer, be added to the guest list, invite others regardless of their own invitation status, or modify your RSVP. Learn more https://support.google.com/calendar/answer/37135#forwarding

2 years, 2 months

1
0
0 0

New Defects reported by Coverity Scan for ARM-software/arm-trusted-firmware

by scan-admin＠coverity.com

Hi, Please find the latest report on new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. 1 new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. New defect(s) Reported-by: Coverity Scan Showing 1 of 1 defect(s) ** CID 401729: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /drivers/st/ddr/stm32mp_ddr_test.c: 134 in stm32mp_ddr_check_size() ________________________________________________________________________________________________________ *** CID 401729: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /drivers/st/ddr/stm32mp_ddr_test.c: 134 in stm32mp_ddr_check_size() 128 uint32_t stm32mp_ddr_check_size(void) 129 { 130 uint32_t offset = sizeof(uint32_t); 131 132 mmio_write_32(STM32MP_DDR_BASE, DDR_PATTERN); 133 >>> CID 401729: Integer handling issues (CONSTANT_EXPRESSION_RESULT) >>> "offset < 4294967296UL" is always true regardless of the values of its operands. This occurs as the logical operand of "while". 134 while (offset < STM32MP_DDR_MAX_SIZE) { 135 mmio_write_32(STM32MP_DDR_BASE + offset, DDR_ANTIPATTERN); 136 dsb(); 137 138 if (mmio_read_32(STM32MP_DDR_BASE) != DDR_PATTERN) { 139 break; ________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=HRESupC-2F2Czv4BOaCWWCy7my0P…

2 years, 3 months

2
1
0 0

Plan for RME support in QEMU

by Jean-Philippe Brucker

Hello, QEMU 8.1 added support for FEAT_RME. It is experimental, enabled with '-cpu max,x-rme=on', and requires fixes that will be available in QEMU 8.2. I'm working on adding support to TF-A and TF-RMM. I just submitted some TF-A patches for review (topic qemu-rme) that enable the feature for the virt platform, and intend to send the necessary changes for TF-RMM within a week or so. Without RMM, the Test Realm Payload is included into the FIP for light testing. After the TF-A and TF-RMM changes, I'd like to add support for the SBSA platform as well, which should be a relatively small change once the common QEMU support is merged. Thanks, Jean --- Building TF-A for QEMU with RME support: make -j CROSS_COMPILE=aarch64-linux-gnu- PLAT=qemu DEBUG=1 RMM=path/to/rmm/build/Debug/rmm.img ENABLE_RME=1 BL33=path/to/QEMU_EFI.fd QEMU_USE_GIC_DRIVER=QEMU_GICV3 all fip dd if=tf-a/build/qemu/debug/bl1.bin of=flash.bin bs=4096 conv=notrunc dd if=tf-a//build/qemu/debug/fip.bin of=flash.bin seek=64 bs=4096 conv=notrunc Running QEMU, for example: qemu-system-aarch64 -cpu max,x-rme=on,sme=off -m 3G -smp 8 -M virt,gic-version=3,virtualization=on,secure=on,acpi=off -bios flash.bin -kernel linux/arch/arm64/boot/Image -initrd path/to/initrd -append console=ttyAMA0 -nographic ... [ 0.825891] kvm [1]: Using prototype RMM support (version 66.0) SMC_RMM_FEATURES 0 > RMI_SUCCESS 33403e30

2 years, 3 months

2
2
0 0

New Member

by Nicholas Vonza

Dear Sir/Madam, Just Join the Forum To Learn and Experience More. Regards, Nicholas Vonza

2 years, 3 months

1
0
0 0

Questions about memory encryption in FVP & TF-A

by Chenxu Wang

Hi all, I find that the latest Arm A-profile manual (DDI0487_J_a) mention several registers/instructions related to memory encryption (e.g., MECID-related registers). So can I ask two questions about it? 1. Is the FVP (I use the Base RevC AEM) support Memory Encryption Context (MEC) and Memory Protection Engine (MPE)? They are critical to memory encryption. If no, do we have some solutions to simulate them and verify memory encryption? 2. Does current TF-A support managing MPE, or other hardware related to memory encryption? Besides that, one problem for curiosity (only related to FVP). 3. I find some PCI-E device can use hardware encryption (example, NVIDIA H100 GPU). Can we attach this device to FVP's PCI-E port? Assume it has already connected to my Host PC via PCI-E. Sincerely, WANG Chenxu

2 years, 3 months

2
1
0 0

New Defects reported by Coverity Scan for ARM-software/arm-trusted-firmware

by scan-admin＠coverity.com

Hi, Please find the latest report on new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. 3 new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. New defect(s) Reported-by: Coverity Scan Showing 3 of 3 defect(s) ** CID 400208: Performance inefficiencies (PASS_BY_VALUE) /include/services/el3_spmd_logical_sp.h: 108 in ffa_partition_info_regs_get_last_idx() ________________________________________________________________________________________________________ *** CID 400208: Performance inefficiencies (PASS_BY_VALUE) /include/services/el3_spmd_logical_sp.h: 108 in ffa_partition_info_regs_get_last_idx() 102 { 103 return (retval->func == FFA_MSG_SEND_DIRECT_RESP_SMC32) || 104 (retval->func == FFA_MSG_SEND_DIRECT_RESP_SMC64); 105 } 106 107 static inline uint16_t ffa_partition_info_regs_get_last_idx( >>> CID 400208: Performance inefficiencies (PASS_BY_VALUE) >>> Passing parameter args of type "struct ffa_value" (size 144 bytes) by value, which exceeds the low threshold of 128 bytes. 108 struct ffa_value args) 109 { 110 return (uint16_t)(args.arg2 & 0xFFFFU); 111 } 112 113 static inline uint16_t ffa_partition_info_regs_get_curr_idx( ** CID 400207: Performance inefficiencies (PASS_BY_VALUE) /services/std_svc/spmd/spmd_logical_sp.c: 359 in ffa_partition_info_regs_get_part_info() ________________________________________________________________________________________________________ *** CID 400207: Performance inefficiencies (PASS_BY_VALUE) /services/std_svc/spmd/spmd_logical_sp.c: 359 in ffa_partition_info_regs_get_part_info() 353 * This function takes an ffa_value structure populated with partition 354 * information from an FFA_PARTITION_INFO_GET_REGS ABI call, extracts 355 * the values and writes it into a ffa_partition_info_v1_1 structure for 356 * other code to consume. 357 */ 358 bool ffa_partition_info_regs_get_part_info( >>> CID 400207: Performance inefficiencies (PASS_BY_VALUE) >>> Passing parameter args of type "struct ffa_value" (size 144 bytes) by value, which exceeds the low threshold of 128 bytes. 359 struct ffa_value args, uint8_t idx, 360 struct ffa_partition_info_v1_1 *partition_info) 361 { 362 uint64_t *arg_ptrs; 363 uint64_t info, uuid_lo, uuid_high; 364 ** CID 400206: Control flow issues (UNREACHABLE) /plat/xilinx/common/plat_fdt.c: 28 in prepare_dtb() ________________________________________________________________________________________________________ *** CID 400206: Control flow issues (UNREACHABLE) /plat/xilinx/common/plat_fdt.c: 28 in prepare_dtb() 22 dtb = (void *)XILINX_OF_BOARD_DTB_ADDR; 23 #endif 24 if (IS_TFA_IN_OCM(BL31_BASE)) 25 return; 26 27 /* Return if no device tree is detected */ >>> CID 400206: Control flow issues (UNREACHABLE) >>> This code cannot be reached: "if (fdt_check_header(dtb) !...". 28 if (fdt_check_header(dtb) != 0) { 29 NOTICE("Can't read DT at %p\n", dtb); 30 return; 31 } 32 33 ret = fdt_open_into(dtb, dtb, XILINX_OF_BOARD_DTB_MAX_SIZE); ________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=HRESupC-2F2Czv4BOaCWWCy7my0P…

2 years, 3 months

3
3
0 0

New TrustedFirmware Discord Server

by Don Harbin

Hi All, Note you may have received another instance of this note but when I attempted to send to all TF ML's simultaneously it seemed to fail, so sending to each one at a time. Sorry about that. :/ We've created a Discord Server for real time chats/sharing. This solution comes at no cost to the project, is set up with channels for each project, includes a #general channel, and supports direct 1-1 chats between members, all with the goal of improving collaboration between trustedfirmware.org developers. We encourage all to join! :) Instructions for joining can be found on the TF.org FAQ page <https://www.trustedfirmware.org/faq/>. See you all there and please don't hesitate to reach out if you have any questions! Don Harbin TrustedFirmware Community Manager don.harbin(a)linaro.org

2 years, 3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

TF-A