- TF-A - lists.trustedfirmware.org

by Nagal, Amit

Hi , I am using TF-A tests tests-single-fault.mk to inject RAS errors on AMD Xilinx platform which is cortex a-78 armv8.2 based. With this test , I can see RAS exceptions are getting triggered at EL2 . I want to trap this exception at EL3 and handle RAS errors further using FFH approach. From code , I could see fvp platform using FAULT_INJECTION_SUPPORT=1 , but from documentation it is meant from ARMv8.4 . I am following https://www.trustedfirmware.org/docs/RAS_Tech_Forum.pdf . Another option is RAS_ALLOW_ERR_REC_ACCESS_NS , but in the pdf , for FFH it is mentioned RAS_ALLOW_ERR_REC_ACCESS_NS should be 0. Can I be advised what should be done to trap the RAS exception at EL3 on armv8.2 cortex a78 platform ? Regards Amit

2 years, 1 month

2
3
0 0

New Defects reported by Coverity Scan for ARM-software/arm-trusted-firmware

by scan-admin＠coverity.com

Hi, Please find the latest report on new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. 3 new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. New defect(s) Reported-by: Coverity Scan Showing 3 of 3 defect(s) ** CID 424609: Parse warnings (PW.PARAM_SET_BUT_NOT_USED) /plat/nuvoton/npcm845x/npcm845x_bl31_setup.c: 132 in () ________________________________________________________________________________________________________ *** CID 424609: Parse warnings (PW.PARAM_SET_BUT_NOT_USED) /plat/nuvoton/npcm845x/npcm845x_bl31_setup.c: 132 in () 126 * in BL2 & EL3 in BL1) before they are lost (potentially). This needs to be 127 * done before the MMU is initialized so that the memory layout can be used 128 * while creating page tables. BL2 has flushed this information to memory, 129 * so we are guaranteed to pick up good data. 130 *****************************************************************************/ 131 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, >>> CID 424609: Parse warnings (PW.PARAM_SET_BUT_NOT_USED) >>> parameter "arg2" was set but never used 132 u_register_t arg2, u_register_t arg3) 133 { 134 arg0 = arg1 = arg2 = arg3 = 0; 135 #if RESET_TO_BL31 136 void *from_bl2 = (void *)arg0; 137 void *plat_params_from_bl2 = (void *)arg3; ** CID 424608: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /drivers/arm/mhu/mhu_v3_x.c: 75 in mhu_v3_x_driver_init() ________________________________________________________________________________________________________ *** CID 424608: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /drivers/arm/mhu/mhu_v3_x.c: 75 in mhu_v3_x_driver_init() 69 /* Unsupported MHU version */ 70 return MHU_V_3_X_ERR_UNSUPPORTED_VERSION; 71 } 72 73 /* Read the MHU Architecture Minor Revision */ 74 dev->subversion = >>> CID 424608: Integer handling issues (CONSTANT_EXPRESSION_RESULT) >>> "(aidr & (15U /* 0xfU << 0U */)) >> (15U /* 0xfU << 0U */)" is 0 regardless of the values of its operands. This occurs as the operand of assignment. 75 ((aidr & MHU_ARCH_MINOR_REV_MASK) >> MHU_ARCH_MINOR_REV_MASK); 76 77 /* Return error if the MHU minor revision is not 0 */ 78 if (dev->subversion != MHU_MINOR_REV_3_0) { 79 /* Unsupported subversion */ 80 return MHU_V_3_X_ERR_UNSUPPORTED_VERSION; ** CID 424607: Parse warnings (PW.PARAM_SET_BUT_NOT_USED) /plat/nuvoton/npcm845x/npcm845x_bl31_setup.c: 131 in () ________________________________________________________________________________________________________ *** CID 424607: Parse warnings (PW.PARAM_SET_BUT_NOT_USED) /plat/nuvoton/npcm845x/npcm845x_bl31_setup.c: 131 in () 125 * Here is an opportunity to copy parameters passed by the calling EL (S-EL1 126 * in BL2 & EL3 in BL1) before they are lost (potentially). This needs to be 127 * done before the MMU is initialized so that the memory layout can be used 128 * while creating page tables. BL2 has flushed this information to memory, 129 * so we are guaranteed to pick up good data. 130 *****************************************************************************/ >>> CID 424607: Parse warnings (PW.PARAM_SET_BUT_NOT_USED) >>> parameter "arg1" was set but never used 131 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, 132 u_register_t arg2, u_register_t arg3) 133 { 134 arg0 = arg1 = arg2 = arg3 = 0; 135 #if RESET_TO_BL31 136 void *from_bl2 = (void *)arg0; ________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=u001.AxU2LYlgjL6eX23u9ErQy-2…

2 years, 1 month

1
0
0 0

Canceled event with note: TF-A Tech Forum @ Thu Mar 21, 2024 5pm - 6pm (GMT+1) (tf-a@lists.trustedfirmware.org)

by Olivier Deprez

This event has been canceled with a note: "Hi, Cancelling this instance as no topic planned. Regards, Olivier. " TF-A Tech Forum Thursday Mar 21, 2024 ⋅ 5pm – 6pm Central European Time - Paris We run an open technical forum call for anyone to participate and it is not restricted to Trusted Firmware project members. It will operate under the guidance of the TF TSC. Feel free to forward this invite to colleagues. Invites are via the TF-A mailing list and also published on the Trusted Firmware website. Details are here: https://www.trustedfirmware.org/meetings/tf-a-technical-forum/Trusted Firmware is inviting you to a scheduled Zoom meeting.Join Zoom Meetinghttps://linaro-org.zoom.us/my/trustedfirmware?pwd=VktXcm5MNUUyVVM4R0k3ZUtvdU84QT09 One tap mobile+16465588656,,9159704974# US (New York)+16699009128,,9159704974# US (San Jose)Dial by your location +1 646 558 8656 US (New York) +1 669 900 9128 US (San Jose) 877 853 5247 US Toll-free 888 788 0099 US Toll-freeMeeting ID: 915 970 4974Find your local number: https://zoom.us/u/ad27hc6t7h Guests marek.bykowski(a)gmail.com okash.khawaja(a)gmail.com tf-a(a)lists.trustedfirmware.org ~~//~~ Invitation from Google Calendar: https://calendar.google.com/calendar/ You are receiving this email because you are an attendee on the event. To stop receiving future updates for this event, decline this event. Forwarding this invitation could allow any recipient to send a response to the organizer, be added to the guest list, invite others regardless of their own invitation status, or modify your RSVP. Learn more https://support.google.com/calendar/answer/37135#forwarding

2 years, 1 month

1
0
0 0

Question about RME-DA in TF-A/TF-RMM/FVP

by Chenxu Wang

Hi all, I find that Arm has considered "device for realms" and purposed RME-DA since last year. This is not only a concept but also includes some SMMU hardware extensions (e.g., Realm Page MMIO and DPT). Unfortunately, I only find few contents related to RME-DA in the latest FVP user guide, and nothing in TF-A/TF-RMM. Thus, can I ask 1. Does current FVP simulate the RME-DA? 2. Will TF-A/TF-RMM supports RME-DA recently? Sincerely, WANG Chenxu

2 years, 1 month

2
1
0 0

Compatibility support for SPM_MM and SPMD

by baopeng (A)

Hi Olivier Deprez, We use the SPM_MM framework mainly for read/write control of security variables. We do not want to modify the original application code at this time. At the same time we want to add support for the new SPMD framework based code. ________________________________ Hi Baopeng, By "code based on the SPM_MM framework" I assume you refer to a secure service running in a S-EL0 partition based on the MM protocol? If you can share this information, what kind of service is this implementing? RAS handling, secure variables, TPM back end, other? What kind of interface is needed to access the service? asynchronous with interrupts? synchronous with SMC from normal world? Another question is why do you need to collocate the SPMD if the MM implementation is already achieving the scenarios you need? Ideally you'd want to migrate this service to run on top of: * the EL3 FF-A SPMC https://trustedfirmware-a.readthedocs.io/en/latest/components/el3-spmc.html * or if the HW/chipset implements it, the S-EL2 FF-A SPMC https://hafnium.readthedocs.io/en/latest/secure-partition-manager/index.htm… Knowing the kind of S-EL0 service would help narrowing the effort for a migration. FF-A (https://developer.arm.com/documentation/den0077/latest/) is a modern evolution of MM (https://developer.arm.com/documentation/den0060/latest) and any functionality achieved by the MM protocol can be handled by FF-A. For example the MM_COMMUNICATE interface can be easily swapped by the FFA_MSG_SEND_DIRECT_REQ interface. Regards, Olivier. ________________________________ From: baopeng (A) via TF-A tf-a(a)lists.trustedfirmware.org<mailto:tf-a@lists.trustedfirmware.org> Sent: 21 February 2024 07:10 To: tf-a(a)lists.trustedfirmware.org tf-a(a)lists.trustedfirmware.org<mailto:tf-a@lists.trustedfirmware.org> Subject: [TF-A] Re: Request for help Hi Olivier Deprez, We have developed code based on the SPM_MM framework and do not want to reconstruct the code. However, we want to adapt the code to the SPMD framework. What should we do? ________________________________ Hi Baopeng, SPM_MM is the legacy implementation for a secure partition manager relying on the MM protocol. This implementation gets deprecated in favor of FF-A based implementations (what you refer to as SPMD + SPMC). Both implementations aren't compatible and it is discouraged to attempt co-locating both. It may be more palatable and future proof to transition all your SW stack to be compliant to FF-A standard. We may help you better if you tell a bit more about the reason for mixing both implementations in the same build. Regards, Olivier. ________________________________ From: baopeng (A) baopeng1@huawei.commailto:baopeng1@huawei.com Sent: 20 February 2024 02:19 To: tf-a-owner(a)lists.trustedfirmware.org tf-a-owner@lists.trustedfirmware.orgmailto:tf-a-owner@lists.trustedfirmware.org Subject: Request for help Dear Sir/ Madam, we need to support the simultaneous loading of SPMD and SPM_MM due to project reasons. However, we notice that the makefile of SPM_MM of ATF does not support the simultaneous loading of SPMD and SPM_MM by default. I would like to ask what is the main reason for making the current restrictions?

2 years, 1 month

2
2
0 0

Updated invitation with note: TF-A Tech Forum @ Every 2 weeks from 9am to 10am on Thursday (MST) (tf-a@lists.trustedfirmware.org)

by Don Harbin

This event has been updated with a note: "Updating invite link" Changed: description TF-A Tech Forum Every 2 weeks from 9am to 10am on Thursday Mountain Standard Time - Phoenix We run an open technical forum call for anyone to participate and it is not restricted to Trusted Firmware project members. It will operate under the guidance of the TF TSC. Feel free to forward this invite to colleagues. Invites are via the TF-A mailing list and also published on the Trusted Firmware website. Details are here: https://www.trustedfirmware.org/meetings/tf-a-technical-forum/Trusted Firmware is inviting you to a scheduled Zoom meeting.Join Zoom Meetinghttps://linaro-org.zoom.us/my/trustedfirmware?pwd=VktXcm5MNUUyVVM4R0k3ZUtvdU84QT09 One tap mobile+16465588656,,9159704974# US (New York)+16699009128,,9159704974# US (San Jose)Dial by your location +1 646 558 8656 US (New York) +1 669 900 9128 US (San Jose) 877 853 5247 US Toll-free 888 788 0099 US Toll-freeMeeting ID: 915 970 4974Find your local number: https://zoom.us/u/ad27hc6t7h Guests tf-a(a)lists.trustedfirmware.org marek.bykowski(a)gmail.com okash.khawaja(a)gmail.com View all guest info https://calendar.google.com/calendar/event?action=VIEW&eid=NWlub3Ewdm1tMmk1… Reply for tf-a(a)lists.trustedfirmware.org and view more details https://calendar.google.com/calendar/event?action=VIEW&eid=NWlub3Ewdm1tMmk1… Your attendance is optional. ~~//~~ Invitation from Google Calendar: https://calendar.google.com/calendar/ You are receiving this email because you are an attendee on the event. To stop receiving future updates for this event, decline this event. Forwarding this invitation could allow any recipient to send a response to the organizer, be added to the guest list, invite others regardless of their own invitation status, or modify your RSVP. Learn more https://support.google.com/calendar/answer/37135#forwarding

2 years, 1 month

2
2
0 0

New Defects reported by Coverity Scan for ARM-software/arm-trusted-firmware

by scan-admin＠coverity.com

Hi, Please find the latest report on new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. 1 new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. New defect(s) Reported-by: Coverity Scan Showing 1 of 1 defect(s) ** CID 415256: Memory - corruptions (ARRAY_VS_SINGLETON) ________________________________________________________________________________________________________ *** CID 415256: Memory - corruptions (ARRAY_VS_SINGLETON) /qcbor/src/qcbor_decode.c: 3725 in QCBORDecode_ExitBoundedMapOrArray() 3719 that is being exited. If there is no cached value, 3720 from previous map search, then do a dummy search. 3721 */ 3722 if(pMe->uMapEndOffsetCache == QCBOR_MAP_OFFSET_CACHE_INVALID) { 3723 QCBORItem Dummy; 3724 Dummy.uLabelType = QCBOR_TYPE_NONE; >>> CID 415256: Memory - corruptions (ARRAY_VS_SINGLETON) >>> Passing "&Dummy" to function "MapSearch" which uses it as an array. This might corrupt or misinterpret adjacent memory locations. 3725 uErr = MapSearch(pMe, &Dummy, NULL, NULL, NULL); 3726 if(uErr != QCBOR_SUCCESS) { 3727 goto Done; 3728 } 3729 } 3730 ________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=u001.AxU2LYlgjL6eX23u9ErQy-2…

2 years, 1 month

1
0
0 0

ENABLE_LTO feature usage.

by Kummari, Prasad

Hi , We want to include ENABLE_LTO option in platform build. Can you please recommend if this can be passed only on the build command line, or it can be included in the platform makefile (platform.mk) also. Regards, Prasad.

2 years, 2 months

4
10
0 0

New Defects reported by Coverity Scan for ARM-software/arm-trusted-firmware

by scan-admin＠coverity.com

Hi, Please find the latest report on new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. 2 new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. New defect(s) Reported-by: Coverity Scan Showing 2 of 2 defect(s) ** CID 415033: Memory - corruptions (OVERRUN) /lib/extensions/amu/aarch64/amu.c: 471 in amu_context_save() ________________________________________________________________________________________________________ *** CID 415033: Memory - corruptions (OVERRUN) /lib/extensions/amu/aarch64/amu.c: 471 in amu_context_save() 465 for (i = 0U; i < amcgcr_el0_cg0nc; i++) { 466 ctx->group0_cnts[i] = amu_group0_cnt_read(i); 467 } 468 469 #if ENABLE_AMU_AUXILIARY_COUNTERS 470 for (i = 0U; i < amcgcr_el0_cg1nc; i++) { >>> CID 415033: Memory - corruptions (OVERRUN) >>> Overrunning array "ctx->group1_cnts" of 16 8-byte elements at element index 254 (byte offset 2039) using index "i" (which evaluates to 254). 471 ctx->group1_cnts[i] = amu_group1_cnt_read(i); 472 } 473 #endif 474 475 /* 476 * Save virtual offsets for counters that offer them. ** CID 415032: Memory - illegal accesses (OVERRUN) /lib/extensions/amu/aarch64/amu.c: 548 in amu_context_restore() ________________________________________________________________________________________________________ *** CID 415032: Memory - illegal accesses (OVERRUN) /lib/extensions/amu/aarch64/amu.c: 548 in amu_context_restore() 542 for (i = 0U; i < amcgcr_el0_cg0nc; i++) { 543 amu_group0_cnt_write(i, ctx->group0_cnts[i]); 544 } 545 546 #if ENABLE_AMU_AUXILIARY_COUNTERS 547 for (i = 0U; i < amcgcr_el0_cg1nc; i++) { >>> CID 415032: Memory - illegal accesses (OVERRUN) >>> Overrunning array "ctx->group1_cnts" of 16 8-byte elements at element index 254 (byte offset 2039) using index "i" (which evaluates to 254). 548 amu_group1_cnt_write(i, ctx->group1_cnts[i]); 549 } 550 #endif 551 552 /* 553 * Restore virtual offsets for counters that offer them. ________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=u001.AxU2LYlgjL6eX23u9ErQy-2…

2 years, 2 months

1
0
0 0

mbedtls and PQC algorithms support

by shripad.nunjundarao＠broadcom.com

Hi, Is there a plan for mbedtls to add support for PQC algorithms (Dilithium/Khyber)? regards, /Shripad

2 years, 2 months

2
1
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

TF-A