Thomas,
Tests are placed under the test -> suites -> service name directory.
In your case you are looking at the Secure Storage Service non secure suite.
For SST The logic is located at :
* Non Secure side tests: test/suites/sst/non_secure/psa_ps_ns_interface_testsuite.c * Secure side tests: test/suites/sst/secure/psa_ps_s_interface_testsuite.c
Hope that helps Minos ________________________________ From: TF-M tf-m-bounces@lists.trustedfirmware.org on behalf of Thomas Törnblom via TF-M tf-m@lists.trustedfirmware.org Sent: 28 November 2019 14:49 To: tf-m@lists.trustedfirmware.org tf-m@lists.trustedfirmware.org Subject: [TF-M] Regression test issues with IAR port
In my quest to port TF-M to the IAR toolchain I've run into issues with a few of the tests, and I need some hints where to look.
The cmake build command line: --- cmake .. -G"Unix Makefiles" -DPROJ_CONFIG=C:\Users\thomasto\Projects\tf-m16\trusted-firmware-m\configs\ConfigRegression.cmake -DTARGET_PLATFORM=MUSCA_A -DCOMPILER=IARARM -DCMAKE_BUILD_TYPE=RelWithDebInfo ---
This results in three similar tests that fails: ---
Executing 'TFM_SST_TEST_1018'
Description: 'Get interface with invalid thread name' Get should not succeed with invalid thread name (Failed at C:/Users/thomasto/Projects/tf-m16/trusted-firmware-m/test/suites/sst/non_secure/psa_ps_ns_interface_testsuite.c:936) TEST FAILED!
Executing 'TFM_SST_TEST_1019'
Description: 'Get info interface with invalid thread name' Get info should not succeed with invalid thread name (Failed at C:/Users/thomasto/Projects/tf-m16/trusted-firmware-m/test/suites/sst/non_secure/psa_ps_ns_interface_testsuite.c:1015) TEST FAILED!
Executing 'TFM_SST_TEST_1020'
Description: 'Remove interface with invalid thread name' Remove should not succeed with invalid thread name (Failed at C:/Users/thomasto/Projects/tf-m16/trusted-firmware-m/test/suites/sst/non_secure/psa_ps_ns_interface_testsuite.c:1093) TEST FAILED! ---
Where do I find the logic that determines if these tests succeed or fails?
Cheers, Thomas
--
*Thomas Törnblom*, /Product Engineer/ IAR Systems AB Box 23051, Strandbodgatan 1 SE-750 23 Uppsala, SWEDEN Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01 E-mail: thomas.tornblom@iar.com mailto:thomas.tornblom@iar.com Website: www.iar.comhttp://www.iar.com http://www.iar.com Twitter: www.twitter.com/iarsystemshttp://www.twitter.com/iarsystems http://www.twitter.com/iarsystems -- TF-M mailing list TF-M@lists.trustedfirmware.org https://lists.trustedfirmware.org/mailman/listinfo/tf-m
Sorry, I was being unclear.
I know where the tests start and ends, but the work appears to be handed off to the OS so that I can't (easily) step through the code and find what function is being used to look up the thread.
The call to psa_ps_get() is used by the test and I assume it ends up using an RTX call and I would like to check what happens there.
Cheers, Thomas
Den 2019-11-28 kl. 16:00, skrev Minos Galanakis:
Thomas,
Tests are placed under the test -> suites -> service name directory.
In your case you are looking at the Secure Storage Service non secure suite.
For SST The logic is located at :
- Non Secure side tests: test/suites/sst/non_secure/psa_ps_ns_interface_testsuite.c
- Secure side tests: test/suites/sst/secure/psa_ps_s_interface_testsuite.c
Hope that helps Minos
*From:* TF-M tf-m-bounces@lists.trustedfirmware.org on behalf of Thomas Törnblom via TF-M tf-m@lists.trustedfirmware.org *Sent:* 28 November 2019 14:49 *To:* tf-m@lists.trustedfirmware.org tf-m@lists.trustedfirmware.org *Subject:* [TF-M] Regression test issues with IAR port In my quest to port TF-M to the IAR toolchain I've run into issues with a few of the tests, and I need some hints where to look.
The cmake build command line:
cmake .. -G"Unix Makefiles" -DPROJ_CONFIG=C:\Users\thomasto\Projects\tf-m16\trusted-firmware-m\configs\ConfigRegression.cmake
-DTARGET_PLATFORM=MUSCA_A -DCOMPILER=IARARM
-DCMAKE_BUILD_TYPE=RelWithDebInfo
This results in three similar tests that fails:
> Executing 'TFM_SST_TEST_1018' Description: 'Get interface with invalid thread name' Get should not succeed with invalid thread name (Failed at C:/Users/thomasto/Projects/tf-m16/trusted-firmware-m/test/suites/sst/non_secure/psa_ps_ns_interface_testsuite.c:936) TEST FAILED! > Executing 'TFM_SST_TEST_1019' Description: 'Get info interface with invalid thread name' Get info should not succeed with invalid thread name (Failed at C:/Users/thomasto/Projects/tf-m16/trusted-firmware-m/test/suites/sst/non_secure/psa_ps_ns_interface_testsuite.c:1015) TEST FAILED! > Executing 'TFM_SST_TEST_1020' Description: 'Remove interface with invalid thread name' Remove should not succeed with invalid thread name (Failed at C:/Users/thomasto/Projects/tf-m16/trusted-firmware-m/test/suites/sst/non_secure/psa_ps_ns_interface_testsuite.c:1093) TEST FAILED!
Where do I find the logic that determines if these tests succeed or fails?
Cheers, Thomas
--
*Thomas Törnblom*, /Product Engineer/ IAR Systems AB Box 23051, Strandbodgatan 1 SE-750 23 Uppsala, SWEDEN Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01 E-mail: thomas.tornblom@iar.com mailto:thomas.tornblom@iar.com Website: www.iar.com http://www.iar.com http://www.iar.com Twitter: www.twitter.com/iarsystems
http://www.twitter.com/iarsystems http://www.twitter.com/iarsystems
TF-M mailing list TF-M@lists.trustedfirmware.org https://lists.trustedfirmware.org/mailman/listinfo/tf-m
tf-m@lists.trustedfirmware.org
-
Minos Galanakis -
Thomas Törnblom