Hi Suresh,

Yes, by default the cc312 acceleration is turned on at build time for SE, and the algorithms will be handled by HW instead of the SW implementation. If you would like to use SW crypto instead you can pass the HW_ACCELERATOR="OFF" flag to cmake when building the SE TF-M instance.

And here are the TF-M image sizes as of now with GCC in release mode: SE: ~185 KiB code flash and ~63 KiB RAM Host: ~22 KiB code flash and ~16 KiB RAM (a few more KiB needed for the images in flash for image header and trailer if loaded by mcuboot)

Best regards, Mark ________________________________ From: David Hu David.Hu@arm.com Sent: Thursday, May 13, 2021 5:26 AM To: Suresh.Marisetty@infineon.com Suresh.Marisetty@infineon.com; Tamas Ban Tamas.Ban@arm.com; tf-m@lists.trustedfirmware.org tf-m@lists.trustedfirmware.org; Mark Horvath Mark.Horvath@arm.com Cc: nd nd@arm.com Subject: RE: Questions on Musca-B1 SE implementation

Hi @Mark Horvathmailto:Mark.Horvath@arm.com,

Could you please help take a look at the following questions about Musca-B1 SE? Thanks 😊

Best regards,

Hu Ziji

From: TF-M tf-m-bounces@lists.trustedfirmware.org On Behalf Of Suresh Marisetty via TF-M Sent: Thursday, May 13, 2021 6:04 AM To: Tamas Ban Tamas.Ban@arm.com; tf-m@lists.trustedfirmware.org Cc: nd nd@arm.com Subject: Re: [TF-M] Questions on Musca-B1 SE implementation

Hi Tamas,

The following is good information. A few questions:

1. Is it correct to state that for the SE, the PSA RoT services do not have any software Crypto implementation, but leverage from CC-312? 2. What is the size of the TFM on the host (M33) with only PSA RoT service proxy with redirection to SE 3. Just trying to understand the TFM image size requirements on M33 vs. SE 4. How much of the Flash region/code Executed In Place vs. execution out of SRAM (XIP)

thanks

Suresh Marisetty

Infineon Semiconductor Corporation

From: Tamas Ban <Tamas.Ban@arm.commailto:Tamas.Ban@arm.com> Sent: Friday, April 30, 2021 12:40 AM To: Marisetty Suresh (CYSC CSS ICW SW SSE) <Suresh.Marisetty@infineon.commailto:Suresh.Marisetty@infineon.com>; tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org Cc: nd <nd@arm.commailto:nd@arm.com> Subject: RE: Questions on Musca-B1 SE implementation

Caution: This e-mail originated outside Infineon Technologies. Do not click on links or open attachments unless you validate it is safehttps://goto.infineon.com/SocialEngineering.

Hi Suresh,

Here is a link how to build images to Musca-B1 SE: https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/platform/ex...

I have built with GCC and MinSizeRel build type:

Profile Medium:

Memory region Used Size Region Size %age Used

FLASH: 101464 B 381 KB 26.01%

RAM: 61304 B 64 KB 93.54%

[100%] Built target tfm_s

Profile Large: Memory region Used Size Region Size %age Used

FLASH: 170448 B 381 KB 43.69%

RAM: 62980 B 64 KB 96.10%

[ 97%] Built target tfm_s

The profiles means different capabilities of TF-M, they were introduced to support constrained devices as well, with limited capability.

There is a detailed description about the profiles here:

https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/docs/techni...

BR,

Tamas

From: TF-M <tf-m-bounces@lists.trustedfirmware.orgmailto:tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Suresh Marisetty via TF-M Sent: 2021. április 29., csütörtök 21:49 To: tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org Subject: [TF-M] Questions on Musca-B1 SE implementation

I am following up on a question that came up on the TFM Core and MCUBoot image sizes that is built for SE on Musca-B1.

We are trying to figure out the resource requirements for SE, to be able to host the TF-M as suggested in the slides below. Wondering if anyone throw more light on the RAM/FLASH requirements for it.

Also, does the TFM profile small/medium/large map to this at all or is it different from them. Also, what’s are the estimated latencies of boot on SE with all the Flash accesses, etc.

https://www.trustedfirmware.org/docs/Musca-B1-Secure-Enclave-Solution.pdf

https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/platform/ex...

Any info on this would be appreciated.

thanks

Suresh Marisetty

Infineon Semiconductor Corporation