Hi Antonio,

We have own port for LPC55S69, so not sure if you are able to run it. But, the issues happens in general code (master branch, the latest current commit). Defined TFM_PSA_API, TFM_LVL = 1. The NULL parameter is causing fault in the first call of tfm_thrd_context_switch(..., NULL,...) => tfm_memcpy(&NULL->state_ctx.ctxb, ...) => memcpy(wrong address), and should cause an issue on any platform.

Thanks, Andrej

-----Original Message----- From: TF-M tf-m-bounces@lists.trustedfirmware.org On Behalf Of Antonio De Angelis via TF-M Sent: Tuesday, April 23, 2019 3:02 PM To: tf-m@lists.trustedfirmware.org Cc: nd nd@arm.com Subject: [EXT] Re: [TF-M] TFM_PSA_API =>BusFault

WARNING: This email was created outside of NXP. DO NOT CLICK links or attachments unless you recognize the sender and know the content is safe.

Hi Andrej,

Could you provide us with instructions on how to replicate the issue you're observing? In particular, which build configuration you're building (.cmake), compiler, platform used and if it's observed on board or FVP/model? Also, are you able to identify the latest commit which was still working in your setup / identify the commit which brings in this issue?

Thanks, Antonio

-----Original Message----- From: TF-M tf-m-bounces@lists.trustedfirmware.org On Behalf Of Andrej Butok via TF-M Sent: 23 April 2019 13:19 To: Andrej Butok andrey.butok@nxp.com Cc: TF-M@lists.trustedfirmware.org Subject: Re: [TF-M] TFM_PSA_API =>BusFault

Father investigation shows, that tfm_pendsv_do_schedule() calls tfm_thrd_context_switch() and passing pth_curr which is set to NULL, so it is causing memcpy() to 0 address => Bus Fault. So this code may not work properly. Please provide a fix.

-----Original Message----- From: TF-M tf-m-bounces@lists.trustedfirmware.org On Behalf Of Andrej Butok via TF-M Sent: Tuesday, April 23, 2019 1:38 PM To: TF-M@lists.trustedfirmware.org Subject: [EXT] [TF-M] TFM_PSA_API =>BusFault

Hello,

After last commits on TFM master branch, when TFM_PSA_API is defined, the tfm examples finish in main()=>tfm_spm_init()=>....=> tfm_thrd_context_switch()=>tfm_memcpy()=>BusFault_Handler(). When TFM_PSA_API is not defined, everything is OK. Also, TFM examples were OK at least 2 weeks ago, even when TFM_PSA_API was defined.

Is it known issue? Or something new (during last week) must be added into our target-specific code?

Thanks, Andrej Butok

-- TF-M mailing list TF-M@lists.trustedfirmware.org https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.trus... -- TF-M mailing list TF-M@lists.trustedfirmware.org https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.trus... -- TF-M mailing list TF-M@lists.trustedfirmware.org https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.trus...