Hello Suresh,

I have no access to a B1 target, which is the reason no IAR port exists.

Cheers, Thomas

24 juli 2021 kl. 22:39 skrev Suresh Marisetty via TF-M tf-m@lists.trustedfirmware.org:

 Hi,

One of the requests that I have is how the code size differs between GCC and IAR for the Musca-B1 SE build.

However, it appears from the documentation that IAR is not supported on Musca-B1. So, I am wondering if anybody can provide some insight on the size from IAR.

And here are the TF-M image sizes as of now with GCC in release mode: SE: ~185 KiB code flash and ~63 KiB RAM Host: ~22 KiB code flash and ~16 KiB RAM (a few more KiB needed for the images in flash for image header and trailer if loaded by mcuboot)

IAR?

thanks Suresh Marisetty Infineon Semiconductor Corporation

From: David Hu David.Hu@arm.com Sent: Sunday, July 4, 2021 11:37 PM To: Marisetty Suresh (CYSC CSS ICW SW SSE) Suresh.Marisetty@infineon.com; Mark Horvath Mark.Horvath@arm.com Cc: nd nd@arm.com; tf-m@lists.trustedfirmware.org Subject: RE: Questions on Musca-B1 SE implementation - code size analysis

Caution: This e-mail originated outside Infineon Technologies. Do not click on links or open attachments unless you validate it is safehttps://goto.infineon.com/SocialEngineering.

Hi Suresh,

1. Please check t Profile Medium and Profile Large design documents below. The ciphers supported are listed in the document.

Profile Medium: https://tf-m-user-guide.trustedfirmware.org/docs/technical_references/profil... Profile Large: https://tf-m-user-guide.trustedfirmware.org/docs/technical_references/profil...

1. I don’t think the software countermeasures against physical attacks are enabled in Musca-B1 SE, by default. Mark, please correct me if I misunderstand it.

TF-M implements a Fault Inject Hardening (FIH) library as software countermeasure to mitigate physical attacks.

FIH is enabled as Medium Profile in Profile Large by default. You can set `TFM_FIH_PROFILE` as OFF to disable FIH features.

FIH is not implemented by mebd TLS or CC312. It consists of protections of TF-M SPM critical routine and platform specific isolation configuration.

Please check FIH design document: https://tf-m-user-guide.trustedfirmware.org/docs/technical_references/tfm_ph...

Compared to Profile Medium, Profile Large enables more cryptographic algorithms support and FIH library. It may also include more configurations of higher isolation.

Best regards, Hu Ziji

From: TF-M <tf-m-bounces@lists.trustedfirmware.orgmailto:tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Suresh Marisetty via TF-M Sent: Sunday, July 4, 2021 2:26 AM To: Mark Horvath <Mark.Horvath@arm.commailto:Mark.Horvath@arm.com>; tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org Cc: nd <nd@arm.commailto:nd@arm.com> Subject: [TF-M] Questions on Musca-B1 SE implementation - code size analysis

Hi Mark,

Wondering if someone can provide more visibility in the following in regards to the SE build with profile medium and large:

1. What ciphers are supported in medium vs. large (I see the size of the code bloats up almost twice from 30 to 60K approx) – observation from size of libmbedcrypto and libcrypto_service_cc312 – any clear documentation on this or a link would be helpful (besides code review) 2. When the SE is built for the large profile, assume it also includes “Software countermeasures against physical attacks” since it is offloading to the CC-312

* Is there a way to build the large profile without physical attack counter-measures? * While library are these countermeasures implemented in (libmbed or lib_cc312)?

1. On our initial analysis, for a medium profile these two libraries appears to be 30K-33K in size each and is this in the right ballpark? (with minsizerel)

I assume the code size increase is due to additional cipher support + physical attack countermeasures. Correct me otherwise.

thanks Suresh Marisetty Infineon Semiconductor Corporation

From: Mark Horvath <Mark.Horvath@arm.commailto:Mark.Horvath@arm.com> Sent: Friday, May 14, 2021 5:30 AM To: Marisetty Suresh (CYSC CSS ICW SW SSE) <Suresh.Marisetty@infineon.commailto:Suresh.Marisetty@infineon.com>; tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org Cc: nd <nd@arm.commailto:nd@arm.com> Subject: Re: Questions on Musca-B1 SE implementation

Caution: This e-mail originated outside Infineon Technologies. Do not click on links or open attachments unless you validate it is safehttps://goto.infineon.com/SocialEngineering.

Hi Suresh,

Yes, by default the cc312 acceleration is turned on at build time for SE, and the algorithms will be handled by HW instead of the SW implementation. If you would like to use SW crypto instead you can pass the HW_ACCELERATOR="OFF" flag to cmake when building the SE TF-M instance.

And here are the TF-M image sizes as of now with GCC in release mode: SE: ~185 KiB code flash and ~63 KiB RAM Host: ~22 KiB code flash and ~16 KiB RAM (a few more KiB needed for the images in flash for image header and trailer if loaded by mcuboot)

Best regards, Mark ________________________________ From: David Hu <David.Hu@arm.commailto:David.Hu@arm.com> Sent: Thursday, May 13, 2021 5:26 AM To: Suresh.Marisetty@infineon.commailto:Suresh.Marisetty@infineon.com <Suresh.Marisetty@infineon.commailto:Suresh.Marisetty@infineon.com>; Tamas Ban <Tamas.Ban@arm.commailto:Tamas.Ban@arm.com>; tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org <tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org>; Mark Horvath <Mark.Horvath@arm.commailto:Mark.Horvath@arm.com> Cc: nd <nd@arm.commailto:nd@arm.com> Subject: RE: Questions on Musca-B1 SE implementation

Hi @Mark Horvathmailto:Mark.Horvath@arm.com,

Could you please help take a look at the following questions about Musca-B1 SE? Thanks 😊

Best regards,

Hu Ziji

From: TF-M <tf-m-bounces@lists.trustedfirmware.orgmailto:tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Suresh Marisetty via TF-M Sent: Thursday, May 13, 2021 6:04 AM To: Tamas Ban <Tamas.Ban@arm.commailto:Tamas.Ban@arm.com>; tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org Cc: nd <nd@arm.commailto:nd@arm.com> Subject: Re: [TF-M] Questions on Musca-B1 SE implementation

Hi Tamas,

The following is good information. A few questions:

1. Is it correct to state that for the SE, the PSA RoT services do not have any software Crypto implementation, but leverage from CC-312? 2. What is the size of the TFM on the host (M33) with only PSA RoT service proxy with redirection to SE 3. Just trying to understand the TFM image size requirements on M33 vs. SE 4. How much of the Flash region/code Executed In Place vs. execution out of SRAM (XIP)

thanks

Suresh Marisetty

Infineon Semiconductor Corporation

From: Tamas Ban <Tamas.Ban@arm.commailto:Tamas.Ban@arm.com> Sent: Friday, April 30, 2021 12:40 AM To: Marisetty Suresh (CYSC CSS ICW SW SSE) <Suresh.Marisetty@infineon.commailto:Suresh.Marisetty@infineon.com>; tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org Cc: nd <nd@arm.commailto:nd@arm.com> Subject: RE: Questions on Musca-B1 SE implementation

Caution: This e-mail originated outside Infineon Technologies. Do not click on links or open attachments unless you validate it is safehttps://goto.infineon.com/SocialEngineering.

Hi Suresh,

Here is a link how to build images to Musca-B1 SE: https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/platform/ex...

I have built with GCC and MinSizeRel build type:

Profile Medium:

Memory region Used Size Region Size %age Used

FLASH: 101464 B 381 KB 26.01%

RAM: 61304 B 64 KB 93.54%

[100%] Built target tfm_s

Profile Large: Memory region Used Size Region Size %age Used

FLASH: 170448 B 381 KB 43.69%

RAM: 62980 B 64 KB 96.10%

[ 97%] Built target tfm_s

The profiles means different capabilities of TF-M, they were introduced to support constrained devices as well, with limited capability.

There is a detailed description about the profiles here:

https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/docs/techni...

BR,

Tamas

From: TF-M <tf-m-bounces@lists.trustedfirmware.orgmailto:tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Suresh Marisetty via TF-M Sent: 2021. április 29., csütörtök 21:49 To: tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org Subject: [TF-M] Questions on Musca-B1 SE implementation

I am following up on a question that came up on the TFM Core and MCUBoot image sizes that is built for SE on Musca-B1.

We are trying to figure out the resource requirements for SE, to be able to host the TF-M as suggested in the slides below. Wondering if anyone throw more light on the RAM/FLASH requirements for it.

Also, does the TFM profile small/medium/large map to this at all or is it different from them. Also, what’s are the estimated latencies of boot on SE with all the Flash accesses, etc.

https://www.trustedfirmware.org/docs/Musca-B1-Secure-Enclave-Solution.pdf

https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/platform/ex...

Any info on this would be appreciated.

thanks

Suresh Marisetty

Infineon Semiconductor Corporation

-- TF-M mailing list TF-M@lists.trustedfirmware.org https://lists.trustedfirmware.org/mailman/listinfo/tf-m