Mate,

Thank you for your response. I discovered not long after I posted my inquiry that recent merges to master should resolve the problem I'm having. I'm in the process of pulling in those commits locally.

Thanks again,

Alan

-----Original Message----- From: TF-M [mailto:tf-m-bounces@lists.trustedfirmware.org] On Behalf Of Mate Toth-Pal via TF-M Sent: Friday, July 19, 2019 1:22 PM To: TF-M@lists.trustedfirmware.org Cc: nd Subject: [EXTERNAL] Re: [TF-M] including platform specific interrupt definitions

Hi Alan,

I'm not sure on what version of TF-M is your base. This part of TF-M changed recently.

https://review.trustedfirmware.org/#/c/trusted-firmware-m/+/1354/ This change introduced the generated manifest header files. For each partition a header file is generated, which contains the signals for the partition. Both IRQ signals, and normal signals in case of IPC mode.

Up to the following change all the signals (except for IRQ) had to be defined manually in a header file tfm_spm_signal_defs.h. This replaces the manually created IPC model signal definitions to the generated signals: https://review.trustedfirmware.org/#/c/trusted-firmware-m/+/1356/

This does the same to the IRQ signals (up until this change, IRQ signals had to be defined in tfm_irq_signal_defs.h): https://review.trustedfirmware.org/#/c/trusted-firmware-m/+/1589/

This, and the related changes remove the manually created signal files. https://review.trustedfirmware.org/#/c/trusted-firmware-m/+/1382/

So depending on your base you either need to manually define the signals, or should have it automatically once the generator script is run.

As a general advice I would suggest to look at the IRQ signal 'SPM_CORE_IRQ_TEST_1_SIGNAL_TIMER_0_IRQ' which is the IRQ signal for one of the test services, and see where it appears and compare it to yours.

Also if you could publish some of your code in the gerrit, we might be able help to find out what is the problem.

Regards, Mate

-----Original Message----- From: TF-M tf-m-bounces@lists.trustedfirmware.org On Behalf Of DeMars, Alan via TF-M Sent: 19 July 2019 18:35 To: tf-m@lists.trustedfirmware.org Subject: [TF-M] including platform specific interrupt definitions

I'm trying to add s secure interrupt to my secure partition manifest but am getting a compile error because there are no definitions of my secure interrupt IRQ name and SIGNAL name.

What is the mechanism for including a platform-specific header that defines platform specific interrupts when compiling "secure_fw/core/ipc/tfm_svcalls.c"?

Alan