Hi Chris,

Thanks for the reply and for the tips.

Yah, I think that the flash is not a problem. The most challenging is RAM, I will try what you suggest.

Cheers, Cristiano

On Fri, Nov 5, 2021 at 12:11 AM Chris.Brand@infineon.com wrote:

Hi Cristiano,

That’s not a platform that’s supported for TF-M, but as you note it is very similar to the platform that is supported.

There should be enough Flash on that board for a TF-M image. The Relwithdebinfo build that I just did occupies around 240KB of flash. Not sure how much RAM it needs.

SMPU configuration is a bit tricky – the SMPU itself is a little inflexible. I’d suggest disabling SMPU protection of RAM to start with. Get it running like that and then add the SMPU protection once you have something running on the board. The build generates a tfm_s.map file that can be quite useful in figuring out what is located where.

Chris

*From:* TF-M tf-m-bounces@lists.trustedfirmware.org * On Behalf Of *Cristiano Rodrigues via TF-M *Sent:* Thursday, November 4, 2021 11:46 AM *To:* tf-m@lists.trustedfirmware.org *Subject:* [TF-M] PSoC64 TF-M - Port to CYB06447BZI-D54

*Caution*: This e-mail originated outside Infineon Technologies. Do not click on links or open attachments unless you validate it is safe https://intranet-content.infineon.com/explore/aboutinfineon/rules/informationsecurity/ug/SocialEngineering/Pages/SocialEngineeringElements_en.aspx .

Hi guys,

I am trying to put tf-m running in the PSoC64 board. However, I have a board that is slightly different from the one used by default in the tf-m. (I have *CYB06447BZI-D54* and the default tf-m is prepared to *CYS0644xxZI-S2D44). *For what I saw, the main difference among them is in memory, *CYB06447BZI-D54 *has 1MB of flash and 256kB of RAM and *CYS0644xxZI-S2D44 *has 2MB of Flash and 1MB of RAM.

So now I'm trying to make a small port from tf-m to *CYB06447BZI-D54. *

I changed the flash size in the flash_layout.h file to meet the *CYB06447BZI-D54 *flash size, however, I am having some difficulties in changing the RAM size. I am trying to change the RAM partitions size in region_defs.h and the smpu definitions of that partitions in smpu_config.h, but without much success.

My question are:

• Is possible to do the porting? Or does *CYB06447BZI-D54* not have

enough memory to run tf-m?

• If possible, what is I missing? Are more changes needed than I'm

making?

Best regards,

Cristiano Rodrigues