It appears to be the logic around creating the ITS flash storage when the flash is empty that fails
This call to its_flash_fs_prepare() fails: --- if (status != PSA_SUCCESS) { /* Remove all data in the ITS memory area and create a valid ITS flash * layout in that area. */ LOG_INFFMT("Creating an empty ITS flash layout.\r\n"); status = its_flash_fs_wipe_all(&fs_ctx_its); if (status != PSA_SUCCESS) { return status; }
/* Attempt to prepare again */ status = its_flash_fs_prepare(&fs_ctx_its); } #endif /* ITS_CREATE_FLASH_LAYOUT */
#ifdef TFM_PARTITION_PROTECTED_STORAGE /* Check status of ITS initialisation before continuing with PS */ if (status != PSA_SUCCESS) { return status; ---
Thomas
Den 2021-11-03 kl. 09:43, skrev Ken Liu via TF-M:
It might be caused by the panic. Put a breakpoint in ‘tfm_platform_hal_system_reset’ should get stopped and know the reason.
/Ken
*From:* TF-M tf-m-bounces@lists.trustedfirmware.org *On Behalf Of *Thomas Törnblom via TF-M *Sent:* Wednesday, November 3, 2021 4:09 PM *To:* tf-m@lists.trustedfirmware.org *Subject:* Re: [TF-M] lpcxpresso55s69 builds broken
While this allows building TF-M, it crashes and loops in the boot.
I have not figured out what causes this.
/Thomas
Den 2021-11-02 kl. 05:53, skrev Ken Liu via TF-M:
Sorry, the merged one should be part of group patches but merged individually. We are removing the dependency on VTOR for initial MSP retrieving, here is the followed one: https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/12228 /Ken *From:* TF-M <tf-m-bounces@lists.trustedfirmware.org> <mailto:tf-m-bounces@lists.trustedfirmware.org> *On Behalf Of *Thomas Törnblom via TF-M *Sent:* Monday, November 1, 2021 11:37 PM *To:* tf-m@lists.trustedfirmware.org *Subject:* Re: [TF-M] lpcxpresso55s69 builds broken Apparently caused by: 68b14d40 SPM : Arch : Refine common arch code Den 2021-11-01 kl. 15:33, skrev Thomas Törnblom: More breakage: In file included from ../secure_fw/spm/include/tfm_arch.h:19, from ../secure_fw/spm/cmsis_psa/spm_ipc.h:13, from ../secure_fw/partitions/idle_partition/load_info_idle_sp.c:10: ../secure_fw/spm/include/tfm_arch_v8m.h:58:2: error: #error "VTOR not present, check configurations." 58 | #error "VTOR not present, check configurations." | ^~~~~ ninja: build stopped: subcommand failed. Same issue with IAR. /Thomas -- *Thomas Törnblom*, /Product Engineer/ IAR Systems AB Box 23051, Strandbodgatan 1 SE-750 23 Uppsala, SWEDEN Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01 E-mail: thomas.tornblom@iar.comWebsite: www.iar.com <http://www.iar.com> Twitter: www.twitter.com/iarsystems <http://www.twitter.com/iarsystems> -- *Thomas Törnblom*, /Product Engineer/ IAR Systems AB Box 23051, Strandbodgatan 1 SE-750 23 Uppsala, SWEDEN Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01 E-mail: thomas.tornblom@iar.comWebsite: www.iar.com <http://www.iar.com> Twitter: www.twitter.com/iarsystems <http://www.twitter.com/iarsystems>--
*Thomas Törnblom*, /Product Engineer/ IAR Systems AB Box 23051, Strandbodgatan 1 SE-750 23 Uppsala, SWEDEN Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01 E-mail: thomas.tornblom@iar.comWebsite: www.iar.com http://www.iar.com Twitter: www.twitter.com/iarsystems http://www.twitter.com/iarsystems