Hi Tamas,
I do not know whether the this two phase setting of MSP_LIMIT is still in use or not. If not the no need for S_MSP_STACK_SIZE_INIT.
The only place where it's used is the GCC linker file: __msp_init_stack_size__ = S_MSP_STACK_SIZE_INIT
So for GCC __msp_init_stack_size__ is in 2 times less (0x400) than for Keil and IAR (0x800) "__msp_init_stack_size__ = S_MSP_STACK_SIZE".
From: TF-M tf-m-bounces@lists.trustedfirmware.org On Behalf Of Tamas Ban via TF-M Sent: Tuesday, June 16, 2020 10:17 AM To: tf-m@lists.trustedfirmware.org Cc: nd nd@arm.com Subject: Re: [TF-M] S_MSP_STACK_SIZE_INIT vs S_MSP_STACK_SIZE
Hi Andrej,
The BOOT_TFM_SHARED_DATA and the MSP_STACK area are overlapping on purpose. The partitions which are expecting to receive data from bootloader is intended to get their own data during the partition init phase with calling tfm_core_get_boot_data() with the partition's major_type. Then the data will be copied from shared area to partition's memory.
So after all partition's init is executed then the data from the shared buffer is distributed to the owning partitions and resides in their memory. At this point the shared_data area can be overwritten by growing MSP, without destroying shared data.
Originally there was an S_MSP_STACK_SIZE_INIT size which was used to setup the MSP_LIMIT for the init phase to avoid overwriting the shared data area. After the init phase the MSP_LIMIT was set again with its full size S_MSP_STACK_SIZE.
I do not know whether the this two phase setting of MSP_LIMIT is still in use or not. If not the no need for S_MSP_STACK_SIZE_INIT.
+-> +-> +--------------+ <- Shared boot data base, S_MSP_STACK_SIZE | Shared| | | M | Data | | | S | | | | P | +-> +--------------+ <- S_MSP_STACK_SIZE_INIT | | | | | | | | | +-> +--------------+ <- Top of MSP
Tamas
From: TF-M <tf-m-bounces@lists.trustedfirmware.orgmailto:tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Andrej Butok via TF-M Sent: 16 June 2020 09:52 To: tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org Subject: [TF-M] S_MSP_STACK_SIZE_INIT vs S_MSP_STACK_SIZE
Hello,
What is a difference between S_MSP_STACK_SIZE_INIT and S_MSP_STACK_SIZE defined in partition\region_defs.h: #define S_MSP_STACK_SIZE_INIT (0x0000400) #define S_MSP_STACK_SIZE (0x0000800)
S_MSP_STACK_SIZE_INIT is used only for gcc. S_MSP_STACK_SIZE is used for armclang and iar.
Guess, it should be used only one definition. So in our platform code we are going to use only S_MSP_STACK_SIZE. Should you fix it for all platforms in the original TFM?
Thanks,
Andrej Butok SW Tech Lead Security & Connectivity, Microcontrollers NXP Semiconductors
