Hi Thomas,
For your 2nd question. I have tested it on my side and it has the same problem.
The TF-M can print normal boot message, but the log becomes garbage after enter into Arch test. The PSA Arch test is another independent project, and I have arisen this issue to the PSA Arch test project: https://github.com/ARM-software/psa-arch-tests/issues/164.
You can watch this issue directly.
Thanks, Edison
From: TF-M tf-m-bounces@lists.trustedfirmware.org On Behalf Of Edison Ai via TF-M Sent: Thursday, March 19, 2020 9:54 PM To: 'tf-m@lists.trustedfirmware.org' tf-m@lists.trustedfirmware.org Cc: nd nd@arm.com Subject: Re: [TF-M] psa-arch-tests console baud rate
Hi Thomas,
Thanks your mail.
For your 1st question. There is indeed a problem to build the PSA arch crypto test on the Musca_a board for the RAM size is too small. I suggest you split the crypto tests into different test images on the Musca_a board.
For the 2nd question, I only test that on FVP AN521 but never met this problem. We will test that on the MPS2 AN521 board soon to check if it is a real problem. If yes, we will try to fix that quickly.
Thanks, Edison
From: TF-M <tf-m-bounces@lists.trustedfirmware.orgmailto:tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Thomas Törnblom via TF-M Sent: Wednesday, March 18, 2020 9:38 PM To: tf-m@lists.trustedfirmware.orgmailto:tf-m@lists.trustedfirmware.org Subject: [TF-M] psa-arch-tests console baud rate
Triggered by Rays mail on slow RSA key pair generation, I built and tried to run the tests, but ran into a couple of issues:
1) I attempted to build it for the Musca A, but apparently that doesn't have enough RAM to run these tests
2) Switching to an MPS2+ with AN521 configuration I see that the baud rate on the UART appears wrong when running the tests.
mcuboot produces correct messages at 115200 bps, as does the normal ConfigRegression* tests, but the ConfigPsaApiTest* appears to produce just garbage.
Is there a setting I need to set to get any useful data on the terminal when running the ConfigPsaApiTests?
Cheers, Thomas --
Thomas T�rnblom, Product Engineer IAR Systems AB Box 23051, Strandbodgatan 1 SE-750 23 Uppsala, SWEDEN Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01 E-mail: thomas.tornblom@iar.commailto:thomas.tornblom@iar.com Website: www.iar.comhttp://www.iar.com Twitter: www.twitter.com/iarsystemshttp://www.twitter.com/iarsystems