Hello,
On STM platform, The boot data is also used to pass specific information to user different from attestation.
For this support a specific Major is used. The actual implementation available in ST cube needs to be reworked so that each platform can customize it (Major value, and table checking access control on tfm core)
Best regards
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Tamas Ban via TF-M
Sent: mardi 9 février 2021 11:52
To: tf-m(a)lists.trustedfirmware.org
Cc: nd <nd(a)arm.com>
Subject: Re: [TF-M] Boot data usage
Hi Ken,
AFAIK current implementation of FWU partition also relies on shared data received from bootloader.
Tamas
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org<mailto:tf-m-bounces@lists.trustedfirmware.org>> On Behalf Of Ken Liu via TF-M
Sent: 2021. február 9., kedd 10:47
To: tf-m(a)lists.trustedfirmware.org<mailto:tf-m@lists.trustedfirmware.org>
Cc: nd <nd(a)arm.com<mailto:nd@arm.com>>
Subject: [TF-M] Boot data usage
Hi,
Wondered if someone is expanding the boot data usage, as the default user is attestation only.
Please provide your case if you are expanding boot data usage.
Thanks!
/Ken
Hi Ken,
AFAIK current implementation of FWU partition also relies on shared data received from bootloader.
Tamas
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Ken Liu via TF-M
Sent: 2021. február 9., kedd 10:47
To: tf-m(a)lists.trustedfirmware.org
Cc: nd <nd(a)arm.com>
Subject: [TF-M] Boot data usage
Hi,
Wondered if someone is expanding the boot data usage, as the default user is attestation only.
Please provide your case if you are expanding boot data usage.
Thanks!
/Ken
Hi,
Wondered if someone is expanding the boot data usage, as the default user is attestation only.
Please provide your case if you are expanding boot data usage.
Thanks!
/Ken
Hi,
I'd like to give a brief introduction on the git normalization before merging this patch.
@Anton Komlev<mailto:Anton.Komlev@arm.com>, can I reserve 15-20 minutes of the next tech forum?
Best Regards,
Kevin
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Kevin Peng via TF-M
Sent: Monday, February 8, 2021 10:56 AM
To: tf-m(a)lists.trustedfirmware.org
Cc: nd <nd(a)arm.com>
Subject: Re: [TF-M] TF-M git repo normalization
Hi all,
Would like to merge the below patch *tomorrow* if there were no objections.
Best Regards,
Kevin
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org<mailto:tf-m-bounces@lists.trustedfirmware.org>> On Behalf Of Kevin Peng via TF-M
Sent: Friday, February 5, 2021 10:37 AM
To: tf-m(a)lists.trustedfirmware.org<mailto:tf-m@lists.trustedfirmware.org>
Cc: nd <nd(a)arm.com<mailto:nd@arm.com>>
Subject: Re: [TF-M] TF-M git repo normalization
This patch was generated by git command automatically:
$ git add --renormalize .
It does change any contents of the files, except the line-endings in the repository.
Your existing local working tree should not be affected when you pick up it or later when it's merged.
The only file maintained manually is the .gitattributes
Best Regards,
Kevin
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org<mailto:tf-m-bounces@lists.trustedfirmware.org>> On Behalf Of Kevin Peng via TF-M
Sent: Friday, February 5, 2021 9:53 AM
To: tf-m(a)lists.trustedfirmware.org<mailto:tf-m@lists.trustedfirmware.org>
Cc: nd <nd(a)arm.com<mailto:nd@arm.com>>
Subject: [TF-M] TF-M git repo normalization
Hi all,
Following the git normalization topic of the tech forum yesterday, I checked TF-M.
It has not been enabled the git normalization feature.
I've made a patch<https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/8283> to make this happen.
Please check out or rebase your work upon this patch to see any issues.
Your existing working tree should not be affected regarding the line-endings.
What is the normalization?
To be simple, different developers on different Host OS can have different line-endings in their local working tree and do not need to worry about interference with each other.
Reference: https://git-scm.com/docs/gitattributes
Best Regards,
Kevin
Hi all,
Would like to merge the below patch *tomorrow* if there were no objections.
Best Regards,
Kevin
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Kevin Peng via TF-M
Sent: Friday, February 5, 2021 10:37 AM
To: tf-m(a)lists.trustedfirmware.org
Cc: nd <nd(a)arm.com>
Subject: Re: [TF-M] TF-M git repo normalization
This patch was generated by git command automatically:
$ git add --renormalize .
It does change any contents of the files, except the line-endings in the repository.
Your existing local working tree should not be affected when you pick up it or later when it's merged.
The only file maintained manually is the .gitattributes
Best Regards,
Kevin
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org<mailto:tf-m-bounces@lists.trustedfirmware.org>> On Behalf Of Kevin Peng via TF-M
Sent: Friday, February 5, 2021 9:53 AM
To: tf-m(a)lists.trustedfirmware.org<mailto:tf-m@lists.trustedfirmware.org>
Cc: nd <nd(a)arm.com<mailto:nd@arm.com>>
Subject: [TF-M] TF-M git repo normalization
Hi all,
Following the git normalization topic of the tech forum yesterday, I checked TF-M.
It has not been enabled the git normalization feature.
I've made a patch<https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/8283> to make this happen.
Please check out or rebase your work upon this patch to see any issues.
Your existing working tree should not be affected regarding the line-endings.
What is the normalization?
To be simple, different developers on different Host OS can have different line-endings in their local working tree and do not need to worry about interference with each other.
Reference: https://git-scm.com/docs/gitattributes
Best Regards,
Kevin
Hi,
I have created a couple of patches to change the way to assemble the partitions, and start with the platform data:
https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/8288
The basic idea is we would avoid using pointer to link data between partitions, as mentioned in one of the past tech forum topics: https://www.trustedfirmware.org/docs/TF-M_partition_storage_arrangement.pdf
Please help to review this patch, especially the platform owners, as this change modifies almost all platform sources.
Also, I just use a direct 'find and replace' so some of the copyright years are not updated. Would update them in subsequent small patches.
Thanks.
/Ken
Hi all,
The design document is merged as planned.
Thanks a lot for your review! Any further comment or suggestion is always comment. 😊
Best regards,
Hu Ziji
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of David Hu via TF-M
Sent: Monday, February 1, 2021 4:01 PM
To: tf-m(a)lists.trustedfirmware.org
Cc: nd <nd(a)arm.com>
Subject: [TF-M] Ask for final review on physical attack mitigation design
Hi all,
I’d like to merge the design document of physical attack mitigation in TF-M this week if no further comment.
May I ask you to take another look at the following document patch?
https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/7476
Best regards,
Hu Ziji
This patch was generated by git command automatically:
$ git add --renormalize .
It does change any contents of the files, except the line-endings in the repository.
Your existing local working tree should not be affected when you pick up it or later when it's merged.
The only file maintained manually is the .gitattributes
Best Regards,
Kevin
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Kevin Peng via TF-M
Sent: Friday, February 5, 2021 9:53 AM
To: tf-m(a)lists.trustedfirmware.org
Cc: nd <nd(a)arm.com>
Subject: [TF-M] TF-M git repo normalization
Hi all,
Following the git normalization topic of the tech forum yesterday, I checked TF-M.
It has not been enabled the git normalization feature.
I've made a patch<https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/8283> to make this happen.
Please check out or rebase your work upon this patch to see any issues.
Your existing working tree should not be affected regarding the line-endings.
What is the normalization?
To be simple, different developers on different Host OS can have different line-endings in their local working tree and do not need to worry about interference with each other.
Reference: https://git-scm.com/docs/gitattributes
Best Regards,
Kevin
Hi all,
Following the git normalization topic of the tech forum yesterday, I checked TF-M.
It has not been enabled the git normalization feature.
I've made a patch<https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/8283> to make this happen.
Please check out or rebase your work upon this patch to see any issues.
Your existing working tree should not be affected regarding the line-endings.
What is the normalization?
To be simple, different developers on different Host OS can have different line-endings in their local working tree and do not need to worry about interference with each other.
Reference: https://git-scm.com/docs/gitattributes
Best Regards,
Kevin
Hi,
Looks like we have an empty agenda for tomorrow's forum. Let's use the time for the free discussion on any TF-M topic. Please raise questions / issues / improvements worth to be discussed within the community.
See you,
Anton
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Anton Komlev via TF-M
Sent: 28 January 2021 13:29
To: tf-m(a)lists.trustedfirmware.org
Cc: nd <nd(a)arm.com>
Subject: [TF-M] Technical Forum call - February 4
Hello,
The next Technical Forum is planned on Thursday, Feb 4 at 7:00-8:00 UTC (Asia time zone).
Please reply on this email with your proposals for agenda topics.
Recording and slides of previous meetings are here:
https://www.trustedfirmware.org/meetings/tf-m-technical-forum/
Best regards,
Anton
