Hello,
The next Technical Forum is planned on Thursday, November 12 at 6:00-07:00 UTC (Asia time zone).
Please reply on this email with your proposals for agenda topics.
Recording and slides of previous meetings are here:
https://www.trustedfirmware.org/meetings/tf-m-technical-forum/
Best regards,
Anton
Just adding some hints from the TF-M point of view.
The TF-M test cases are RTOS independent.
And test entry functions are provided for integrating the tests to any RTOS - test_app()
You just need to call them in your application thread.
Of course, you need to implement the os_wrapper APIs as well.
You can refer to the os_wrapper_cmsis_rtos_v2.c for details.
The old build system of TF-M used to provide libraries of the tests.
The new build system is not having those yet. So the source codes need to be built.
The test case libraries should be added back to the new build system and then integrating tf-m tests to RTOS should be much more direct.
Best Regards,
Kevin
-----Original Message-----
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Raef Coles via TF-M
Sent: Tuesday, November 3, 2020 11:19 PM
To: Antonio Ken IANNILLO <antonioken.iannillo(a)uni.lu>; Kevin Townsend (kevin.townsend(a)linaro.org) <kevin.townsend(a)linaro.org>
Cc: tf-m(a)lists.trustedfirmware.org
Subject: Re: [TF-M] Integrating a different RTOS in tf-m-test
Good spot Antonio, those docs are out of date. I'll try to get them updated before the code freeze.
Raef
________________________________________
From: Antonio Ken IANNILLO
Sent: Tuesday, November 03, 2020 14:35
To: Raef Coles; Kevin Townsend (kevin.townsend(a)linaro.org)
Cc: tf-m(a)lists.trustedfirmware.org
Subject: Re: [TF-M] Integrating a different RTOS in tf-m-test
Hi Raef,
I agree with you, also reading the documentation https://ci.trustedfirmware.org/view/TF-M/job/tf-m-build-docs-nightly/lastSt… (even if it seems obsolete since some files are missing). For example, are now the static library for the test included in the one you mentioned?
I'm using the module offered by zephyr to build and import the tfm, but I get a lot of missing references.
Further, I searched in the install directory built by tfm and I cannot really find all of them.
--
Antonio Ken Iannillo
On 03/11/2020, 15:08, "Raef Coles" <Raef.Coles(a)arm.com> wrote:
One of the things tfm produces is the NS api static library, which should be found in `interface/libpsa_api_ns.a`. There is also a ns platforms static lib in the same directory. I'm not sure how easy it is to pick these up from the zephyr buildsystem, but those should contain the symbols you want.
Raef
________________________________________
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> on behalf of Antonio Ken IANNILLO via TF-M <tf-m(a)lists.trustedfirmware.org>
Sent: 03 November 2020 11:45
To: Kevin Townsend (kevin.townsend(a)linaro.org)
Cc: tf-m(a)lists.trustedfirmware.org
Subject: Re: [TF-M] Integrating a different RTOS in tf-m-test
Hi Kevin,
Thank you for your message.
I’m trying to create a zephyr application copying the tfm-test non secure application (https://github.com/zephyrproject-rtos/trusted-firmware-m/blob/master/tf-m-t…).
The only thing that is not clear is how to include the tfm platform code (e.g., https://github.com/zephyrproject-rtos/trusted-firmware-m/blob/master/truste…).
I suppose as a static library from the zephyr tfm module but I cannot really find how.
Can you point me to the right direction?
Or do you have a different way to run the tfm-tests?
Best,
--
Antonio Ken Iannillo
From: Kevin Townsend <kevin.townsend(a)linaro.org>
Date: Monday, 2 November 2020 at 13:08
To: Antonio Ken IANNILLO <antonioken.iannillo(a)uni.lu>
Cc: "tf-m(a)lists.trustedfirmware.org" <tf-m(a)lists.trustedfirmware.org>
Subject: Re: [TF-M] Integrating a different RTOS in tf-m-test
Hi Antonio,
There is currently an issue filed in Zephyr to add a new sample application that will make it easy to run the PSA API tests via Zephyr, but it we're currently working on finalizing higher priority changes before the 1.2 code freeze later this week: https://github.com/zephyrproject-rtos/zephyr/issues/29476
So, there isn't an 'easy' way to build these tests in Zephyr today out of the box using Zephyr as the RTOS on the NS side, unless you want to have a go at it yourself in the short term while we try to make sure Zephyr is ready for the changes in T-M 1.2.
Best regards,
Kevin
On Mon, 2 Nov 2020 at 10:29, Antonio Ken IANNILLO via TF-M <tf-m(a)lists.trustedfirmware.org<mailto:tf-m@lists.trustedfirmware.org>> wrote:
Hi all,
I wanted to use some other RTOS in the NS side while testing tf-m.
Is there a simple way to use the Zephyr kernel or FreeRTOS in the tf-m-test (-DTEST_S=ON, -DTEST_NS=ON) instead of the default RTX?
Best,
--
Antonio Ken Iannillo
Research Scientist – SEDAN group
SnT – Interdisciplinary Centre for Security, Reliability and Trust
UNIVERSITÉ DU LUXEMBOURG
CAMPUS KIRCHBERG
29, avenue John F. Kennedy
L-1855 Luxembourg Kirchberg
T +352 46 66 44 9660
Join the conversation
News<https://wwwen.uni.lu/snt/news_events> | Twitter<https://twitter.com/SnT_uni_lu> | Linkedin<https://www.linkedin.com/school/snt-lu/>
www.uni.lu/snt<http://www.uni.lu/snt>
--
TF-M mailing list
TF-M(a)lists.trustedfirmware.org<mailto:TF-M@lists.trustedfirmware.org>
https://lists.trustedfirmware.org/mailman/listinfo/tf-m
--
TF-M mailing list
TF-M(a)lists.trustedfirmware.org
https://lists.trustedfirmware.org/mailman/listinfo/tf-m
Good spot Antonio, those docs are out of date. I'll try to get them updated before the code freeze.
Raef
________________________________________
From: Antonio Ken IANNILLO
Sent: Tuesday, November 03, 2020 14:35
To: Raef Coles; Kevin Townsend (kevin.townsend(a)linaro.org)
Cc: tf-m(a)lists.trustedfirmware.org
Subject: Re: [TF-M] Integrating a different RTOS in tf-m-test
Hi Raef,
I agree with you, also reading the documentation https://ci.trustedfirmware.org/view/TF-M/job/tf-m-build-docs-nightly/lastSt… (even if it seems obsolete since some files are missing). For example, are now the static library for the test included in the one you mentioned?
I'm using the module offered by zephyr to build and import the tfm, but I get a lot of missing references.
Further, I searched in the install directory built by tfm and I cannot really find all of them.
--
Antonio Ken Iannillo
On 03/11/2020, 15:08, "Raef Coles" <Raef.Coles(a)arm.com> wrote:
One of the things tfm produces is the NS api static library, which should be found in `interface/libpsa_api_ns.a`. There is also a ns platforms static lib in the same directory. I'm not sure how easy it is to pick these up from the zephyr buildsystem, but those should contain the symbols you want.
Raef
________________________________________
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> on behalf of Antonio Ken IANNILLO via TF-M <tf-m(a)lists.trustedfirmware.org>
Sent: 03 November 2020 11:45
To: Kevin Townsend (kevin.townsend(a)linaro.org)
Cc: tf-m(a)lists.trustedfirmware.org
Subject: Re: [TF-M] Integrating a different RTOS in tf-m-test
Hi Kevin,
Thank you for your message.
I’m trying to create a zephyr application copying the tfm-test non secure application (https://github.com/zephyrproject-rtos/trusted-firmware-m/blob/master/tf-m-t…).
The only thing that is not clear is how to include the tfm platform code (e.g., https://github.com/zephyrproject-rtos/trusted-firmware-m/blob/master/truste…).
I suppose as a static library from the zephyr tfm module but I cannot really find how.
Can you point me to the right direction?
Or do you have a different way to run the tfm-tests?
Best,
--
Antonio Ken Iannillo
From: Kevin Townsend <kevin.townsend(a)linaro.org>
Date: Monday, 2 November 2020 at 13:08
To: Antonio Ken IANNILLO <antonioken.iannillo(a)uni.lu>
Cc: "tf-m(a)lists.trustedfirmware.org" <tf-m(a)lists.trustedfirmware.org>
Subject: Re: [TF-M] Integrating a different RTOS in tf-m-test
Hi Antonio,
There is currently an issue filed in Zephyr to add a new sample application that will make it easy to run the PSA API tests via Zephyr, but it we're currently working on finalizing higher priority changes before the 1.2 code freeze later this week: https://github.com/zephyrproject-rtos/zephyr/issues/29476
So, there isn't an 'easy' way to build these tests in Zephyr today out of the box using Zephyr as the RTOS on the NS side, unless you want to have a go at it yourself in the short term while we try to make sure Zephyr is ready for the changes in T-M 1.2.
Best regards,
Kevin
On Mon, 2 Nov 2020 at 10:29, Antonio Ken IANNILLO via TF-M <tf-m(a)lists.trustedfirmware.org<mailto:tf-m@lists.trustedfirmware.org>> wrote:
Hi all,
I wanted to use some other RTOS in the NS side while testing tf-m.
Is there a simple way to use the Zephyr kernel or FreeRTOS in the tf-m-test (-DTEST_S=ON, -DTEST_NS=ON) instead of the default RTX?
Best,
--
Antonio Ken Iannillo
Research Scientist – SEDAN group
SnT – Interdisciplinary Centre for Security, Reliability and Trust
UNIVERSITÉ DU LUXEMBOURG
CAMPUS KIRCHBERG
29, avenue John F. Kennedy
L-1855 Luxembourg Kirchberg
T +352 46 66 44 9660
Join the conversation
News<https://wwwen.uni.lu/snt/news_events> | Twitter<https://twitter.com/SnT_uni_lu> | Linkedin<https://www.linkedin.com/school/snt-lu/>
www.uni.lu/snt<http://www.uni.lu/snt>
--
TF-M mailing list
TF-M(a)lists.trustedfirmware.org<mailto:TF-M@lists.trustedfirmware.org>
https://lists.trustedfirmware.org/mailman/listinfo/tf-m
One of the things tfm produces is the NS api static library, which should be found in `interface/libpsa_api_ns.a`. There is also a ns platforms static lib in the same directory. I'm not sure how easy it is to pick these up from the zephyr buildsystem, but those should contain the symbols you want.
Raef
________________________________________
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> on behalf of Antonio Ken IANNILLO via TF-M <tf-m(a)lists.trustedfirmware.org>
Sent: 03 November 2020 11:45
To: Kevin Townsend (kevin.townsend(a)linaro.org)
Cc: tf-m(a)lists.trustedfirmware.org
Subject: Re: [TF-M] Integrating a different RTOS in tf-m-test
Hi Kevin,
Thank you for your message.
I’m trying to create a zephyr application copying the tfm-test non secure application (https://github.com/zephyrproject-rtos/trusted-firmware-m/blob/master/tf-m-t…).
The only thing that is not clear is how to include the tfm platform code (e.g., https://github.com/zephyrproject-rtos/trusted-firmware-m/blob/master/truste…).
I suppose as a static library from the zephyr tfm module but I cannot really find how.
Can you point me to the right direction?
Or do you have a different way to run the tfm-tests?
Best,
--
Antonio Ken Iannillo
From: Kevin Townsend <kevin.townsend(a)linaro.org>
Date: Monday, 2 November 2020 at 13:08
To: Antonio Ken IANNILLO <antonioken.iannillo(a)uni.lu>
Cc: "tf-m(a)lists.trustedfirmware.org" <tf-m(a)lists.trustedfirmware.org>
Subject: Re: [TF-M] Integrating a different RTOS in tf-m-test
Hi Antonio,
There is currently an issue filed in Zephyr to add a new sample application that will make it easy to run the PSA API tests via Zephyr, but it we're currently working on finalizing higher priority changes before the 1.2 code freeze later this week: https://github.com/zephyrproject-rtos/zephyr/issues/29476
So, there isn't an 'easy' way to build these tests in Zephyr today out of the box using Zephyr as the RTOS on the NS side, unless you want to have a go at it yourself in the short term while we try to make sure Zephyr is ready for the changes in T-M 1.2.
Best regards,
Kevin
On Mon, 2 Nov 2020 at 10:29, Antonio Ken IANNILLO via TF-M <tf-m(a)lists.trustedfirmware.org<mailto:tf-m@lists.trustedfirmware.org>> wrote:
Hi all,
I wanted to use some other RTOS in the NS side while testing tf-m.
Is there a simple way to use the Zephyr kernel or FreeRTOS in the tf-m-test (-DTEST_S=ON, -DTEST_NS=ON) instead of the default RTX?
Best,
--
Antonio Ken Iannillo
Research Scientist – SEDAN group
SnT – Interdisciplinary Centre for Security, Reliability and Trust
UNIVERSITÉ DU LUXEMBOURG
CAMPUS KIRCHBERG
29, avenue John F. Kennedy
L-1855 Luxembourg Kirchberg
T +352 46 66 44 9660
Join the conversation
News<https://wwwen.uni.lu/snt/news_events> | Twitter<https://twitter.com/SnT_uni_lu> | Linkedin<https://www.linkedin.com/school/snt-lu/>
www.uni.lu/snt<http://www.uni.lu/snt>
--
TF-M mailing list
TF-M(a)lists.trustedfirmware.org<mailto:TF-M@lists.trustedfirmware.org>
https://lists.trustedfirmware.org/mailman/listinfo/tf-m
Sorry Thomas - Someday I'll get that IAR license working and stop breaking support every 5 seconds. Thanks for all the hard work and fixes.
Patches look good, have reviewed.
Raef
________________________________________
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> on behalf of Thomas Törnblom via TF-M <tf-m(a)lists.trustedfirmware.org>
Sent: 03 November 2020 12:22
To: DeMars, Alan via TF-M
Subject: [TF-M] Current IAR support
Just when you think you have nailed everfything down, you decide to start with a fresh clone and stuff don't build anymore ;)
See: https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/6766
I have now gone over and tried building everything that has IAR support and here are my findings.
I have used the following patches:
https://review.trustedfirmware.org/c/TF-M/tf-m-tests/+/5978https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/6766
I have built for the following targets:
musca_a
mps2/an519
mps2/an521
mps2/an539
mps2/sse-200_aws
mps3/an524
cypress/psoc64
nxp/lpcxpresso55s69 (-DBL2=False as bl2 support appears to have been added recently to this target)
stm/nucleo_l552ze_q
stm/stm32l562e_dk
The mps2/fvp_sse300 requires a compiler with support for the M55, and the IAR compiler with support for this is not yet released.
I have run tests on the following targets:
musca_a
mps2/an519
mps2/an521
mps2/an539
The cypress/psoc64 board I have appears to be obsolete now and I could not flash the secure image to it.
The nuvoton/m2351 appears to have IAR support, but it appears untested as it gives linking errors for the bl2 and NS startup files.
There are some old and new warnings for type issues and some other minor things.
The QCBOR NaN tests are still failing, see:
https://developer.trustedfirmware.org/T700
This really is an issue where the ARM ABI and IEEE 754 are incompatible and we are following the ARM ABI. In reality neither ARMCLANG nor GNUARM are fully ARM ABI compliant as they are not ignoring the relevant bits.
Thomas
--
Thomas Törnblom, Product Engineer
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com<mailto:thomas.tornblom@iar.com> Website: www.iar.com<http://www.iar.com>
Twitter: www.twitter.com/iarsystems<http://www.twitter.com/iarsystems>
Just when you think you have nailed everfything down, you decide to
start with a fresh clone and stuff don't build anymore ;)
See: https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/6766
I have now gone over and tried building everything that has IAR support
and here are my findings.
I have used the following patches:
https://review.trustedfirmware.org/c/TF-M/tf-m-tests/+/5978https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/6766
I have built for the following targets:
musca_a
mps2/an519
mps2/an521
mps2/an539
mps2/sse-200_aws
mps3/an524
cypress/psoc64
nxp/lpcxpresso55s69 (-DBL2=False as bl2 support appears to have been
added recently to this target)
stm/nucleo_l552ze_q
stm/stm32l562e_dk
The mps2/fvp_sse300 requires a compiler with support for the M55, and
the IAR compiler with support for this is not yet released.
I have run tests on the following targets:
musca_a
mps2/an519
mps2/an521
mps2/an539
The cypress/psoc64 board I have appears to be obsolete now and I could
not flash the secure image to it.
The nuvoton/m2351 appears to have IAR support, but it appears untested
as it gives linking errors for the bl2 and NS startup files.
There are some old and new warnings for type issues and some other minor
things.
The QCBOR NaN tests are still failing, see:
https://developer.trustedfirmware.org/T700
This really is an issue where the ARM ABI and IEEE 754 are incompatible
and we are following the ARM ABI. In reality neither ARMCLANG nor GNUARM
are fully ARM ABI compliant as they are not ignoring the relevant bits.
Thomas
--
*Thomas Törnblom*, /Product Engineer/
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com <mailto:thomas.tornblom@iar.com>
Website: www.iar.com <http://www.iar.com>
Twitter: www.twitter.com/iarsystems <http://www.twitter.com/iarsystems>
Hi Antonio,
There is currently an issue filed in Zephyr to add a new sample application
that will make it easy to run the PSA API tests via Zephyr, but it we're
currently working on finalizing higher priority changes before the 1.2 code
freeze later this week:
https://github.com/zephyrproject-rtos/zephyr/issues/29476
So, there isn't an 'easy' way to build these tests in Zephyr today out of
the box using Zephyr as the RTOS on the NS side, unless you want to have a
go at it yourself in the short term while we try to make sure Zephyr is
ready for the changes in T-M 1.2.
Best regards,
Kevin
On Mon, 2 Nov 2020 at 10:29, Antonio Ken IANNILLO via TF-M <
tf-m(a)lists.trustedfirmware.org> wrote:
> Hi all,
>
> I wanted to use some other RTOS in the NS side while testing tf-m.
>
> Is there a simple way to use the Zephyr kernel or FreeRTOS in the
> tf-m-test (-DTEST_S=ON, -DTEST_NS=ON) instead of the default RTX?
>
>
>
> Best,
>
> --
>
> *Antonio Ken Iannillo*
>
> Research Scientist – SEDAN group
>
> SnT – Interdisciplinary Centre for Security, Reliability and Trust
>
> UNIVERSITÉ DU LUXEMBOURG
>
>
>
> CAMPUS KIRCHBERG
> 29, avenue John F. Kennedy
> L-1855 Luxembourg Kirchberg
> T +352 46 66 44 9660
>
>
>
> Join the conversation
>
> News <https://wwwen.uni.lu/snt/news_events> | Twitter
> <https://twitter.com/SnT_uni_lu> | Linkedin
> <https://www.linkedin.com/school/snt-lu/>
>
> www.uni.lu/snt
> --
> TF-M mailing list
> TF-M(a)lists.trustedfirmware.org
> https://lists.trustedfirmware.org/mailman/listinfo/tf-m
>
I've verified that reverting the tf-m-tests patch fixes the build failures
that Chris outlined.
Cheers,
Mal
On Mon, Nov 2, 2020 at 6:16 PM David Hu via TF-M <
tf-m(a)lists.trustedfirmware.org> wrote:
> Hi Chris,
>
>
>
> Sorry for the build failure. A patch is merged into tf-m-tests but its
> peer ones in TF-M haven’t been approved yet.
>
> I have temporarily reverted that tf-m-tests patch. Please have another try.
>
>
>
> Best regards,
>
> Hu Ziji
>
>
>
> *From:* TF-M <tf-m-bounces(a)lists.trustedfirmware.org> * On Behalf Of *Christopher
> Brand via TF-M
> *Sent:* Tuesday, November 3, 2020 1:54 AM
> *To:* tf-m(a)lists.trustedfirmware.org
> *Subject:* [TF-M] cmake error
>
>
>
> I just fetched the latest master
> (1655ef5120e99c62782575d0a8b3707ebfc2148e), and I’m now getting a cmake
> error:
>
> $ cmake -S . -B build_GNUARM_Relwithdebinfo '-GUnix Makefiles'
> -DTFM_PLATFORM=cypress/psoc64 -DCMAKE_TOOLCHAIN_FILE=toolchain_GNUARM.cmake
> -DCMAKE_BUILD_TYPE=Relwithdebinfo -DTEST_NS=ON -DTEST_S=ON -DTFM_IRQ_TEST=ON
>
> […]
>
> CMake Error at
> build_GNUARM_Relwithdebinfo/lib/ext/tfm_test_repo-src/app/CMakeLists.txt:17
> (tfm_toolchain_reload_compiler):
>
> Unknown CMake command "tfm_toolchain_reload_compiler".
>
>
>
> Looks like tf-tests commit c41f3a078713b17b5654851329d63bcc0672874b
> introduced calls to tfm_toolchain_reload_compiler(), which I don’t see
> declared anywhere.
>
>
>
> I can work around it by using a local checkout of tf-m-tests at HEAD~.
>
>
>
> Chris Brand
>
> Sr Prin Software Engr, MCD: WIRELESS
>
>
>
> Cypress Semiconductor Corp.
>
> An Infineon Technologies Company
>
> #320-13700 International Place, Richmond, British Columbia V6V 2X8 Canada
>
> www.infineon.comwww.cypress.com
>
>
>
>
> This message and any attachments may contain confidential information from
> Cypress or its subsidiaries. If it has been received in error, please
> advise the sender and immediately delete this message.
> --
> TF-M mailing list
> TF-M(a)lists.trustedfirmware.org
> https://lists.trustedfirmware.org/mailman/listinfo/tf-m
>
Hi Chris,
Sorry for the build failure. A patch is merged into tf-m-tests but its peer ones in TF-M haven't been approved yet.
I have temporarily reverted that tf-m-tests patch. Please have another try.
Best regards,
Hu Ziji
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Christopher Brand via TF-M
Sent: Tuesday, November 3, 2020 1:54 AM
To: tf-m(a)lists.trustedfirmware.org
Subject: [TF-M] cmake error
I just fetched the latest master (1655ef5120e99c62782575d0a8b3707ebfc2148e), and I'm now getting a cmake error:
$ cmake -S . -B build_GNUARM_Relwithdebinfo '-GUnix Makefiles' -DTFM_PLATFORM=cypress/psoc64 -DCMAKE_TOOLCHAIN_FILE=toolchain_GNUARM.cmake -DCMAKE_BUILD_TYPE=Relwithdebinfo -DTEST_NS=ON -DTEST_S=ON -DTFM_IRQ_TEST=ON
[...]
CMake Error at build_GNUARM_Relwithdebinfo/lib/ext/tfm_test_repo-src/app/CMakeLists.txt:17 (tfm_toolchain_reload_compiler):
Unknown CMake command "tfm_toolchain_reload_compiler".
Looks like tf-tests commit c41f3a078713b17b5654851329d63bcc0672874b introduced calls to tfm_toolchain_reload_compiler(), which I don't see declared anywhere.
I can work around it by using a local checkout of tf-m-tests at HEAD~.
Chris Brand
Sr Prin Software Engr, MCD: WIRELESS
Cypress Semiconductor Corp.
An Infineon Technologies Company
#320-13700 International Place, Richmond, British Columbia V6V 2X8 Canada
www.infineon.com<http://www.infineon.com> www.cypress.com<http://www.cypress.com>
This message and any attachments may contain confidential information from Cypress or its subsidiaries. If it has been received in error, please advise the sender and immediately delete this message.
Hi All,
Gentle reminder about the Mbed TLS workshop tomorrow (Tuesday, November 3rd) from 2 to 6pm GMT.
See agenda and zoom link here - https://www.trustedfirmware.org/meetings/mbed-tls-workshop/
Thanks,
Shebu
-----Original Appointment-----
From: Trusted Firmware Public Meetings <linaro.org_havjv2figrh5egaiurb229pd8c(a)group.calendar.google.com>
Sent: Friday, October 23, 2020 12:32 AM
To: Trusted Firmware Public Meetings; Shebu Varghese Kuriakose; mbed-tls(a)lists.trustedfirmware.org; Don Harbin; psa-crypto(a)lists.trustedfirmware.org; Dave Rodgman
Subject: Mbed TLS Virtual Workshop
When: Tuesday, November 3, 2020 2:00 PM-6:00 PM (UTC+00:00) Dublin, Edinburgh, Lisbon, London.
Where: Zoom: https://linaro-org.zoom.us/j/95315200315?pwd=ZDJGc1BZMHZLV29DTmpGUllmMjB1UT…
You have been invited to the following event.
Mbed TLS Virtual Workshop
When
Tue Nov 3, 2020 7am – 11am Mountain Standard Time - Phoenix
Where
Zoom: https://linaro-org.zoom.us/j/95315200315?pwd=ZDJGc1BZMHZLV29DTmpGUllmMjB1UT… (map<https://www.google.com/maps/search/Zoom:+https:%2F%2Flinaro-org.zoom.us%2Fj…>)
Calendar
shebu.varghesekuriakose(a)arm.com<mailto:shebu.varghesekuriakose@arm.com>
Who
•
Don Harbin - creator
•
shebu.varghesekuriakose(a)arm.com<mailto:shebu.varghesekuriakose@arm.com>
•
mbed-tls(a)lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org>
•
psa-crypto(a)lists.trustedfirmware.org<mailto:psa-crypto@lists.trustedfirmware.org>
•
dave.rodgman(a)arm.com<mailto:dave.rodgman@arm.com>
more details »<https://www.google.com/calendar/event?action=VIEW&eid=NHVvY2FxY2o4Njk3MWZkd…>
Hi,
Trustedfirmware.org community project would like to invite you to the Mbed TLS Virtual Workshop.
The purpose of the workshop is to bring together the Mbed TLS community including maintainers, contributors and users to discuss
* The future direction of the project and
* Ways to improve community collaboration
Here is the agenda for the workshop.
Topic Time (in GMT)
Welcome 2.00 - 2.10pm
Constant-time code 2.10 – 2.30pm
Processes - how does work get scheduled? 2.30 – 2.50pm
PSA Crypto APIs 2.50 – 3.20pm
PSA Crypto for Silicon Labs Wireless
MCUs - Why, What, Where and When 3.20 – 3.50pm
Break
Roadmap, TLS1.3 Update 4.10 – 4.30pm
Mbed TLS 3.0 Plans, Scope 4.30 – 5.00pm
How do I contribute my first review
and be an effective Mbed TLS reviewer 5.00 – 5.30pm
Regards,
Don Harbin
Trusted Firmware Community Manager
==============Zoom details below:====================
Trusted Firmware is inviting you to a scheduled Zoom meeting.
Topic: Mbed TLS Virtual Workshop
Time: Nov 3, 2020 02:00 PM Greenwich Mean Time
Join Zoom Meeting
https://linaro-org.zoom.us/j/95315200315?pwd=ZDJGc1BZMHZLV29DTmpGUllmMjB1UT…<https://www.google.com/url?q=https%3A%2F%2Flinaro-org.zoom.us%2Fj%2F9531520…>
Meeting ID: 953 1520 0315
Passcode: 143755
One tap mobile
+16699009128,,95315200315# US (San Jose)
+12532158782,,95315200315# US (Tacoma)
Dial by your location
+1 669 900 9128 US (San Jose)
+1 253 215 8782 US (Tacoma)
+1 346 248 7799 US (Houston)
+1 646 558 8656 US (New York)
+1 301 715 8592 US (Germantown)
+1 312 626 6799 US (Chicago)
888 788 0099 US Toll-free
877 853 5247 US Toll-free
Meeting ID: 953 1520 0315
Find your local number: https://linaro-org.zoom.us/u/apL3hgti4<https://www.google.com/url?q=https%3A%2F%2Flinaro-org.zoom.us%2Fu%2FapL3hgt…>
Going (shebu.varghesekuriakose(a)arm.com<mailto:shebu.varghesekuriakose@arm.com>)? Yes<https://www.google.com/calendar/event?action=RESPOND&eid=NHVvY2FxY2o4Njk3MW…> - Maybe<https://www.google.com/calendar/event?action=RESPOND&eid=NHVvY2FxY2o4Njk3MW…> - No<https://www.google.com/calendar/event?action=RESPOND&eid=NHVvY2FxY2o4Njk3MW…> more options »<https://www.google.com/calendar/event?action=VIEW&eid=NHVvY2FxY2o4Njk3MWZkd…>
Invitation from Google Calendar<https://www.google.com/calendar/>
You are receiving this courtesy email at the account shebu.varghesekuriakose(a)arm.com<mailto:shebu.varghesekuriakose@arm.com> because you are an attendee of this event.
To stop receiving future updates for this event, decline this event. Alternatively you can sign up for a Google account at https://www.google.com/calendar/ and control your notification settings for your entire calendar.
Forwarding this invitation could allow any recipient to send a response to the organizer and be added to the guest list, or invite others regardless of their own invitation status, or to modify your RSVP. Learn More<https://support.google.com/calendar/answer/37135#forwarding>.
