Hi Thomas,
Sorry about that. I have reproduced the issue on AN521 by copying over the lpcxpresso55s69 storage config. I'll investigate a fix on that platform, but will need you to verify it for me afterwards as I don't have that platform.
Kind regards,
Jamie
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Thomas Törnblom via TF-M
Sent: 03 February 2021 13:30
To: tf-m(a)lists.trustedfirmware.org
Subject: Re: [TF-M] NXP lpcxpresso55s69 appears broken
Looks like this is the commit that breaks the nxp/lpcxpresso55s69 support:
---
PS C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m> git bisect good
6a3946aa017fa4da3953a825991f8ce755114637 is the first bad commit
commit 6a3946aa017fa4da3953a825991f8ce755114637
Author: Jamie Fox <jamie.fox(a)arm.com><mailto:jamie.fox@arm.com>
Date: Mon Dec 7 21:50:31 2020 +0000
Platform: TF-M ITS and PS HAL
...
---
Den 2021-02-03 kl. 13:54, skrev Thomas Törnblom via TF-M:
I have just fixed an IAR linking issue for the nxp/lpcxpresso55s69, see https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/8251
I tried using the current sources, but it seems that there is some issues causing the board to run into a hard fault when built with GNUARM.
Not sure what commit caused the breakage.
Cheers,
Thomas
--
Thomas Törnblom, Product Engineer
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com<mailto:thomas.tornblom@iar.com> Website: www.iar.com<http://www.iar.com>
Twitter: www.twitter.com/iarsystems<http://www.twitter.com/iarsystems>
--
Thomas Törnblom, Product Engineer
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com<mailto:thomas.tornblom@iar.com> Website: www.iar.com<http://www.iar.com>
Twitter: www.twitter.com/iarsystems<http://www.twitter.com/iarsystems>
Hi Jamie,
I’ll be happy to test here as well if you add me to the change request.
Best regards,
Kevin
On Wed, 3 Feb 2021 at 16:10, Jamie Fox via TF-M <
tf-m(a)lists.trustedfirmware.org> wrote:
> Hi Thomas,
>
>
>
> Sorry about that. I have reproduced the issue on AN521 by copying over the
> lpcxpresso55s69 storage config. I’ll investigate a fix on that platform,
> but will need you to verify it for me afterwards as I don’t have that
> platform.
>
>
>
> Kind regards,
>
> Jamie
>
>
>
> *From:* TF-M <tf-m-bounces(a)lists.trustedfirmware.org> *On Behalf Of *Thomas
> Törnblom via TF-M
> *Sent:* 03 February 2021 13:30
> *To:* tf-m(a)lists.trustedfirmware.org
> *Subject:* Re: [TF-M] NXP lpcxpresso55s69 appears broken
>
>
>
> Looks like this is the commit that breaks the nxp/lpcxpresso55s69 support:
> ---
> PS C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m> git bisect good
> 6a3946aa017fa4da3953a825991f8ce755114637 is the first bad commit
> commit 6a3946aa017fa4da3953a825991f8ce755114637
> Author: Jamie Fox <jamie.fox(a)arm.com> <jamie.fox(a)arm.com>
> Date: Mon Dec 7 21:50:31 2020 +0000
>
> Platform: TF-M ITS and PS HAL
> ...
> ---
>
> Den 2021-02-03 kl. 13:54, skrev Thomas Törnblom via TF-M:
>
> I have just fixed an IAR linking issue for the nxp/lpcxpresso55s69, see
> https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/8251
>
> I tried using the current sources, but it seems that there is some issues
> causing the board to run into a hard fault when built with GNUARM.
>
> Not sure what commit caused the breakage.
>
> Cheers,
> Thomas
>
> --
>
> *Thomas Törnblom*, *Product Engineer*
> IAR Systems AB
> Box 23051, Strandbodgatan 1
> SE-750 23 Uppsala, SWEDEN
> Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
> E-mail: thomas.tornblom(a)iar.com Website: www.iar.com
> Twitter: www.twitter.com/iarsystems
>
>
>
>
>
> --
>
> *Thomas Törnblom*, *Product Engineer*
> IAR Systems AB
> Box 23051, Strandbodgatan 1
> SE-750 23 Uppsala, SWEDEN
> Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
> E-mail: thomas.tornblom(a)iar.com Website: www.iar.com
> Twitter: www.twitter.com/iarsystems
> --
> TF-M mailing list
> TF-M(a)lists.trustedfirmware.org
> https://lists.trustedfirmware.org/mailman/listinfo/tf-m
>
Looks like this is the commit that breaks the nxp/lpcxpresso55s69 support:
---
PS C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m> git bisect good
6a3946aa017fa4da3953a825991f8ce755114637 is the first bad commit
commit 6a3946aa017fa4da3953a825991f8ce755114637
Author: Jamie Fox <jamie.fox(a)arm.com>
Date: Mon Dec 7 21:50:31 2020 +0000
Platform: TF-M ITS and PS HAL
...
---
Den 2021-02-03 kl. 13:54, skrev Thomas Törnblom via TF-M:
> I have just fixed an IAR linking issue for the nxp/lpcxpresso55s69,
> see https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/8251
>
> I tried using the current sources, but it seems that there is some
> issues causing the board to run into a hard fault when built with GNUARM.
>
> Not sure what commit caused the breakage.
>
> Cheers,
> Thomas
>
> --
>
> *Thomas Törnblom*, /Product Engineer/
> IAR Systems AB
> Box 23051, Strandbodgatan 1
> SE-750 23 Uppsala, SWEDEN
> Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
> E-mail: thomas.tornblom(a)iar.com <mailto:thomas.tornblom@iar.com>
> Website: www.iar.com <http://www.iar.com>
> Twitter: www.twitter.com/iarsystems <http://www.twitter.com/iarsystems>
>
--
*Thomas Törnblom*, /Product Engineer/
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com <mailto:thomas.tornblom@iar.com>
Website: www.iar.com <http://www.iar.com>
Twitter: www.twitter.com/iarsystems <http://www.twitter.com/iarsystems>
I have just fixed an IAR linking issue for the nxp/lpcxpresso55s69, see
https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/8251
I tried using the current sources, but it seems that there is some
issues causing the board to run into a hard fault when built with GNUARM.
Not sure what commit caused the breakage.
Cheers,
Thomas
--
*Thomas Törnblom*, /Product Engineer/
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com <mailto:thomas.tornblom@iar.com>
Website: www.iar.com <http://www.iar.com>
Twitter: www.twitter.com/iarsystems <http://www.twitter.com/iarsystems>
Hi all,
I'd like to merge the design document of physical attack mitigation in TF-M this week if no further comment.
May I ask you to take another look at the following document patch?
https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/7476
Best regards,
Hu Ziji
Oyvind,
Thanks for putting this together. Looks quite useful, and saves some
monotony debugging.
I put together a similar script but as a Python function for GDB:
https://gist.github.com/microbuilder/1677a27e4566a28b36a79f954f1dede6 ...
having this in C, however, means you don't need to have a Python-enabled
version of GDB.
Best regards,
Kevin
On Fri, 29 Jan 2021 at 11:33, Rønningstad, Øyvind via TF-M <
tf-m(a)lists.trustedfirmware.org> wrote:
> Hi everyone
>
> I wanted to make it easier to debug HardFaults/BusFaults/SecureFaults in
> TFM, since I’ve gotten quite a few of them while adding the nrf platforms.
>
> I have created a proposal in
> https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/7891 and
> would like to get some comments on the general idea.
>
> The proposal gathers a number of different values, especially the ones
> that are harder to retrieve in a debugger, like the fault status registers
> in SCB.
>
> The values are placed in memory so they can be inspected in a debugger,
> and if built with -DTFM_SPM_LOG_LEVEL=TFM_SPM_LOG_LEVEL_DEBUG they are also
> printed.
>
> Here is an example of the printout:
>
> FATAL ERROR: HardFault
>
> Here is some context for the exception:
>
> EXC_RETURN (LR): 0xFFFFFFBD
>
> Exception came from non-secure FW in thread mode.
>
> MSP(_S): 0x200007F8
>
> PSP(_S): 0x20000F28
>
> Exception frame at: 0x200176D8
>
> R0: 0x0000003E
>
> R1: 0x00000001
>
> R2: 0x00000001
>
> R3: 0xFFFFFFFF
>
> R12: 0x00000000
>
> LR: 0x00050623
>
> PC: 0x00050626
>
> CFSR: 0x00000000
>
> BFAR: Not Valid
>
> MMFAR: Not Valid
>
> HFSR: 0x40000000
>
> SFSR: 0x00000000
>
> SFAR: Not Valid
>
>
>
> BR, Øyvind Rønningstad
> --
> TF-M mailing list
> TF-M(a)lists.trustedfirmware.org
> https://lists.trustedfirmware.org/mailman/listinfo/tf-m
>
Hi everyone
I wanted to make it easier to debug HardFaults/BusFaults/SecureFaults in TFM, since I've gotten quite a few of them while adding the nrf platforms.
I have created a proposal in https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/7891 and would like to get some comments on the general idea.
The proposal gathers a number of different values, especially the ones that are harder to retrieve in a debugger, like the fault status registers in SCB.
The values are placed in memory so they can be inspected in a debugger, and if built with -DTFM_SPM_LOG_LEVEL=TFM_SPM_LOG_LEVEL_DEBUG they are also printed.
Here is an example of the printout:
FATAL ERROR: HardFault
Here is some context for the exception:
EXC_RETURN (LR): 0xFFFFFFBD
Exception came from non-secure FW in thread mode.
MSP(_S): 0x200007F8
PSP(_S): 0x20000F28
Exception frame at: 0x200176D8
R0: 0x0000003E
R1: 0x00000001
R2: 0x00000001
R3: 0xFFFFFFFF
R12: 0x00000000
LR: 0x00050623
PC: 0x00050626
CFSR: 0x00000000
BFAR: Not Valid
MMFAR: Not Valid
HFSR: 0x40000000
SFSR: 0x00000000
SFAR: Not Valid
BR, Øyvind Rønningstad
Hello,
The next Technical Forum is planned on Thursday, Feb 4 at 7:00-8:00 UTC (Asia time zone).
Please reply on this email with your proposals for agenda topics.
Recording and slides of previous meetings are here:
https://www.trustedfirmware.org/meetings/tf-m-technical-forum/
Best regards,
Anton
Hi,
Just a humble suggestion: capability could be added to cmake to generate a build environment manifest. This could be a JSON or simple text file listing the location and version of each dependency (tool or software). The manifest file could simplify tracking down similar issues.
/George
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Thomas Törnblom via TF-M
Sent: 28 January 2021 08:38
To: Sherry Zhang <Sherry.Zhang2(a)arm.com>; tf-m(a)lists.trustedfirmware.org
Cc: nd <nd(a)arm.com>
Subject: Re: [TF-M] Is Musca-A deprecated already?
Thanks Sherry,
Appears the current "cysecuretools" has a dependency on imgtool 1.7.0a1, which is likely where it came from.
I did build for musca_a last week and I may have updated cysecuretools since then as I had issues with flashing the psoc64, and that must have installed 1.7.0a1.
I installed 1.7.1, which caused a dependency error on cysecuretools 3.0.0.
Works now!
Cheers,
Thomas
Den 2021-01-28 kl. 03:50, skrev Sherry Zhang:
Hi Thomas,
The issue is caused by the imgtool package itself. The version 1.7.0a1 is a pre-release version. If you check the line 378 of image.py of the imgtool package of version 1.7.0a1, it does not check the 'None' before accessing the custom_tlvs.items:
[cid:image003.jpg@01D6F552.951E90A0]
In the version of 1.7.1, it has added the 'None' check at line 389 in image.py:
[cid:image004.jpg@01D6F552.951E90A0]
In TF-M build system, the custom_tlvs should be 'None'.
To solve your issue, I suggest you use a release version of the imgtool package, such as 1.7.1, other than a pre-release one.
Please let me know how it goes.
Regards,
Sherry Zhang
From: Thomas Törnblom <thomas.tornblom(a)iar.com><mailto:thomas.tornblom@iar.com>
Sent: Wednesday, January 27, 2021 4:46 PM
To: Sherry Zhang <Sherry.Zhang2(a)arm.com><mailto:Sherry.Zhang2@arm.com>; tf-m(a)lists.trustedfirmware.org<mailto:tf-m@lists.trustedfirmware.org>
Cc: nd <nd(a)arm.com><mailto:nd@arm.com>
Subject: Re: [TF-M] Is Musca-A deprecated already?
Hi Sherry,
Looks like I have version 1.7.0a1.
PS C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m\cmake_build_iar> imgtool version
1.7.0a1
Cheers,
Thomas
Den 2021-01-27 kl. 09:22, skrev Sherry Zhang:
Hi Thomas,
Can you share the version of the imgtool package you used? The recommended version is >=1.6.0. We run the build command on Linux locally and it works well.
An alternative option is to use the imgtool script from the upstream MCUBoot repo. To achieve that you can copy the folder ./build_dir/lib/ext/mcuboot-src/scripts/imgtool to bl2/ext/mcuboot/scripts/wrapper/.
Regards,
Sherry Zhang
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org><mailto:tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Thomas T�rnblom via TF-M
Sent: Wednesday, January 27, 2021 12:28 AM
To: tf-m(a)lists.trustedfirmware.org<mailto:tf-m@lists.trustedfirmware.org>
Subject: [TF-M] Is Musca-A deprecated already?
I'm working on some IAR brokenness for the cypress/psoc64 and for comparison I'm attempting to build for my favorite board, the musca_a, but it seems builds fails now. I think it was working last week, but today I'm unable to build with any of the toolchains.
I get the following errors frmo all of them. Here's a gcc build:
---
[629/629] Generating tfm_s_ns_signed.bin
FAILED: bl2/ext/mcuboot/tfm_s_ns_signed.bin
cmd.exe /C "cd /D C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m\cmake_build_armclang\bl2\ext\mcuboot && C:\Users\thomasto\AppData\Local\Programs\Python\Python39\python.exe C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/bl2/ext/mcuboot/scripts/wrapper/wrapper.py -v 1.2.0 --layout C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/cmake_build_armclang/bl2/ext/mcuboot/CMakeFiles/signing_layout_s.dir/./signing_layout_s_ns.o -k C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/bl2/ext/mcuboot/root-RSA-3072.pem --public-key-format full --align 1 --pad --pad-header -H 0x400 -s auto -d "(0, 0.0.0+0)" -d "(1, 0.0.0+0)" tfm_s_ns.bin C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/cmake_build_armclang/bl2/ext/mcuboot/tfm_s_ns_signed.bin && "C:\Program Files\CMake\bin\cmake.exe" -E copy C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/cmake_build_armclang/bl2/ext/mcuboot/tfm_s_ns_signed.bin C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/cmake_build_armclang/bin"
Traceback (most recent call last):
File "C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m\bl2\ext\mcuboot\scripts\wrapper\wrapper.py", line 126, in <module>
wrap()
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\click\core.py", line 829, in __call__
return self.main(*args, **kwargs)
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\click\core.py", line 782, in main
rv = self.invoke(ctx)
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\click\core.py", line 1066, in invoke
return ctx.invoke(self.callback, **ctx.params)
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\click\core.py", line 610, in invoke
return callback(*args, **kwargs)
File "C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m\bl2\ext\mcuboot\scripts\wrapper\wrapper.py", line 121, in wrap
img.create(key, public_key_format, enckey, dependencies, boot_record)
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\imgtool\image.py", line 378, in create
for tag, value in custom_tlvs.items():
AttributeError: 'NoneType' object has no attribute 'items'
ninja: build stopped: subcommand failed.
---
cmake line:
cmake -GNinja -S .. -B . -DTFM_PLATFORM=musca_a "-DTFM_TOOLCHAIN_FILE=..\toolchain_GNUARM.cmake" -DTEST_NS=ON -DTEST_S=ON -DCMAKE_BUILD_TYPE=Debug -DMCUBOOT_LOG_LEVEL=DEBUG -DTFM_PSA_API=ON
I've tested building for several of the other targets, which seems to work, but I don't have any of these here.
Ideas?
Thanks,
Thomas
--
Thomas T�rnblom, Product Engineer
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com<mailto:thomas.tornblom@iar.com> Website: www.iar.com<http://www.iar.com>
Twitter: www.twitter.com/iarsystems<http://www.twitter.com/iarsystems>
--
Thomas T�rnblom, Product Engineer
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com<mailto:thomas.tornblom@iar.com> Website: www.iar.com<http://www.iar.com>
Twitter: www.twitter.com/iarsystems<http://www.twitter.com/iarsystems>
--
Thomas Törnblom, Product Engineer
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com<mailto:thomas.tornblom@iar.com> Website: www.iar.com<http://www.iar.com>
Twitter: www.twitter.com/iarsystems<http://www.twitter.com/iarsystems>
Hi Thomas,
Can you share the version of the imgtool package you used? The recommended version is >=1.6.0. We run the build command on Linux locally and it works well.
An alternative option is to use the imgtool script from the upstream MCUBoot repo. To achieve that you can copy the folder ./build_dir/lib/ext/mcuboot-src/scripts/imgtool to bl2/ext/mcuboot/scripts/wrapper/.
Regards,
Sherry Zhang
From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Thomas Törnblom via TF-M
Sent: Wednesday, January 27, 2021 12:28 AM
To: tf-m(a)lists.trustedfirmware.org
Subject: [TF-M] Is Musca-A deprecated already?
I'm working on some IAR brokenness for the cypress/psoc64 and for comparison I'm attempting to build for my favorite board, the musca_a, but it seems builds fails now. I think it was working last week, but today I'm unable to build with any of the toolchains.
I get the following errors frmo all of them. Here's a gcc build:
---
[629/629] Generating tfm_s_ns_signed.bin
FAILED: bl2/ext/mcuboot/tfm_s_ns_signed.bin
cmd.exe /C "cd /D C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m\cmake_build_armclang\bl2\ext\mcuboot && C:\Users\thomasto\AppData\Local\Programs\Python\Python39\python.exe C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/bl2/ext/mcuboot/scripts/wrapper/wrapper.py -v 1.2.0 --layout C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/cmake_build_armclang/bl2/ext/mcuboot/CMakeFiles/signing_layout_s.dir/./signing_layout_s_ns.o -k C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/bl2/ext/mcuboot/root-RSA-3072.pem --public-key-format full --align 1 --pad --pad-header -H 0x400 -s auto -d "(0, 0.0.0+0)" -d "(1, 0.0.0+0)" tfm_s_ns.bin C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/cmake_build_armclang/bl2/ext/mcuboot/tfm_s_ns_signed.bin && "C:\Program Files\CMake\bin\cmake.exe" -E copy C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/cmake_build_armclang/bl2/ext/mcuboot/tfm_s_ns_signed.bin C:/Users/thomasto/Projects/tf-m4/trusted-firmware-m/cmake_build_armclang/bin"
Traceback (most recent call last):
File "C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m\bl2\ext\mcuboot\scripts\wrapper\wrapper.py", line 126, in <module>
wrap()
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\click\core.py", line 829, in __call__
return self.main(*args, **kwargs)
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\click\core.py", line 782, in main
rv = self.invoke(ctx)
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\click\core.py", line 1066, in invoke
return ctx.invoke(self.callback, **ctx.params)
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\click\core.py", line 610, in invoke
return callback(*args, **kwargs)
File "C:\Users\thomasto\Projects\tf-m4\trusted-firmware-m\bl2\ext\mcuboot\scripts\wrapper\wrapper.py", line 121, in wrap
img.create(key, public_key_format, enckey, dependencies, boot_record)
File "C:\Users\thomasto\AppData\Local\Programs\Python\Python39\lib\site-packages\imgtool\image.py", line 378, in create
for tag, value in custom_tlvs.items():
AttributeError: 'NoneType' object has no attribute 'items'
ninja: build stopped: subcommand failed.
---
cmake line:
cmake -GNinja -S .. -B . -DTFM_PLATFORM=musca_a "-DTFM_TOOLCHAIN_FILE=..\toolchain_GNUARM.cmake" -DTEST_NS=ON -DTEST_S=ON -DCMAKE_BUILD_TYPE=Debug -DMCUBOOT_LOG_LEVEL=DEBUG -DTFM_PSA_API=ON
I've tested building for several of the other targets, which seems to work, but I don't have any of these here.
Ideas?
Thanks,
Thomas
--
Thomas Törnblom, Product Engineer
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom(a)iar.com<mailto:thomas.tornblom@iar.com> Website: www.iar.com<http://www.iar.com>
Twitter: www.twitter.com/iarsystems<http://www.twitter.com/iarsystems>
