Hi,
Is there anyone using environment variables for the "manifest" attribute in out-of-tree manifest lists?
I'm asking because I'm working to support configurable stack_size for Secure Partitions<https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/15155>.
In the patch the support of environment variables in manifest lists is removed<https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/15155/1/tool…>.
Because I have to call the CMake command configure_file to replace the stack_size symbols (CMake variables<https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/15155/1/secu…> surrounded with "@") with their values.
While configure_file does not recognize environment variables.
If you do have environment variables in manifest list, there is an alternative:
Replace the env. variables with CMake variables surrounded with "@" and set the value of the CMake variables in either config files or command line inputs.
Best Regards,
Kevin
Hi all,
I'd like to cancel tech form in May 12 due to empty agenda.
Best regards,
Hu Ziji
From: David Hu via TF-M <tf-m(a)lists.trustedfirmware.org>
Sent: Thursday, May 5, 2022 2:11 PM
To: tf-m(a)lists.trustedfirmware.org
Cc: nd <nd(a)arm.com>
Subject: [TF-M] Technical Forum call - May 12
Hi,
(On behalf of Anton)
The next Technical Forum is planned on Thursday, May 12, 15:00-16:00 UTC (West time zone).
Please reply on this email with your proposals for agenda topics.
Recording and slides of previous meetings are here:
https://www.trustedfirmware.org/meetings/tf-m-technical-forum/
Best regards,
Hu Ziji
Hi,
the initial attestation token implementation is aligned with this specification:
https://datatracker.ietf.org/doc/html/draft-tschofenig-rats-psa-token-05
This spec is still evolving and there is a newer version which changes the key values of the claims in the token:
https://www.ietf.org/archive/id/draft-tschofenig-rats-psa-token-09.html#tab…<https://www.ietf.org/archive/id/draft-tschofenig-rats-psa-token-09.html%23t…>
This can cause combability issues between token issuer (device) and token verifier (some remote verification service).
This is an ABI change between token issuer and consumer.
The breaking effect would be manifest in unaccepted IAT tokens by the verifier.
On-device side I see these options to make the transition:
- A build-time option could be introduced which determines which range of key numbers to use. The default value would be the new range. To not let new users pick up the old values accidentally. Existing users can notice the incompatibility issue during the integration test and adjust their build command accordingly. However, the old range would be announced as deprecated in the next TF-M release, then will be removed in the next release after.
- Immediate switch over to the new range, without supporting the old range anymore. On the verification service side, an SW update can handle the transition and might be accepting both ranges for a while. I assume the verification service can be updated more easily than remote devices therefore better to handle the compatibility issue there.
- Keeping the support for both ranges for the long term and letting users choose by build time.
Please share your thoughts on:
- Are you aware that the attestation service is used in deployed devices where this transition can cause incompatibility?
- From the above list which option would you vote to support the transition?
Best regards,
Tamas Ban
Hi,
In one of the past tech forums, we claimed that we don't encourage contribution in common logic in assembly, and one of the patches was abandoned because of this. That patch is designed to improve the memset/memcpy performance.
We override these APIs in general because we want the code can be auditable. Then we provided implementations in C, but it shows these implementation does not provide good performance. We want to apply the toolchain provided versions, and looks GNU tool provides the straightest 'byte-copy' version. And armclang involves unnecessary variants which increase the code size a little (not big).
Hence we provide a version with 'tiny' optimization in assembly and mark this patch an exception to the review guidelines, as these under-layer functions won't get changed frequently. We are also seeking an ideal way to apply toolchain versions.
The patch is here for your review:
https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/13735
Thanks.
/Ken
Hello all,
I wanted to let you know that I made the PR which adds encryption on ITS files using the methodology that we discussed before. The encryption is happening in a transparent way for the user, and I tried to avoid major changes in the ITS filesystem. Please add yourself as a reviewer and provide feedback if you think that this is an interesting use case for you.
https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/15096
Regards,
Georgios Vasilakis
Hi,
(On behalf of Anton)
The next Technical Forum is planned on Thursday, May 12, 15:00-16:00 UTC (West time zone).
Please reply on this email with your proposals for agenda topics.
Recording and slides of previous meetings are here:
https://www.trustedfirmware.org/meetings/tf-m-technical-forum/
Best regards,
Hu Ziji
Hello,
I am pleased to announce the new v1.6.0 released of TF-M project.
New major features are:
* MCUboot updated to v1.9.0.
* Mbed TLS updated to v3.1.0 (Support all required PSA Crypto APIs).
* Enabled Secure Function (SFN) Model Partition compliance in IPC backend.
* Interrupt support (both SLIH/FLIH) for the SFN backend.
* MM-IOVEC Support for the SFN backend.
* The following Secure Partitions are converted to SFN model:
* Protected Storage
* Internal Trusted Storage
* Initial Attestation
* FF-M v1.1 SFN Model supported in Profile Small.
* HAL Separation of Library Model and IPC/SFN backend.
* FP support for Armv8.1-M Mainline for IPC backend.
* Simplified build output message and configurable output.
* Halting instead of rebooting on panic in debug build type.
* Automated testing of MCUboot BL2.
* A new driver interface for the CC-312 runtime library as specified in the PSA Unified Driver spec [1]_.
* Added reference bootloader stage 1 (BL1) bootloader for certain platforms.
* A new CC312 ROM library for the BL1.
* Updated documentation structure.
The changes tagged by TF-Mv1.6.0 and located in the release/v1.6.x<https://review.trustedfirmware.org/q/project:TF-M%252Ftrusted-firmware-m+br…> branch at the moment.
In short, they will be integrated with the main branch and be available from there.
Thanks everyone for contribution, review and support this milestone.
Anton
Hi,
The next Technical Forum is planned on Thursday, April 28, 7:00-8:00 UTC (East time zone).
Please reply on this email with your proposals for agenda topics.
Recording and slides of previous meetings are here:
https://www.trustedfirmware.org/meetings/tf-m-technical-forum/
Best regards,
Anton
Hi everyone,
We have discussed the design proposal of supporting secure Flash in tf-m
framework via this mailing list before,now the implementation code of this
external trusted secure storage partition has been uploaded to tf-m-extras
repo for review：
https://review.trustedfirmware.org/c/TF-M/tf-m-extras/+/14953
And the binary component of this patch has also been uploaded to
tf-binaries repo：
https://review.trustedfirmware.org/c/tf-binaries/+/14954
For easy understanding please refer to this document first:
https://review.trustedfirmware.org/c/TF-M/tf-m-extras/+/14953/1/partitions/…
Looking forward to your comments and suggestions.
Best Regards,
Poppy Wu
吴偏偏
Macronix Microelectronics (Suzhou) Co.,Ltd
旺宏微电子（苏州）有限公司
http://www.mxic.com.cn
============================================================================
CONFIDENTIALITY NOTE:
This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as it attachments from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.
Macronix International Co., Ltd.
=====================================================================
Hello,
The branch release/1.6.x<https://git.trustedfirmware.org/TF-M%2Ftrusted-firmware-m.git/log/?h=refs%2…> has been created, indicating the project feature's freeze and beginning the release process. Expecting to place RC1 tag asap, after successful run of the basic tests.
Let me remind that the code is not frozen, and development can be continued on the main branch.
Thanks,
Anton
