Hi,
I am trying to setup and run the RME support in TF-A, using the steps described here,
https://trustedfirmware-a.readthedocs.io/en/latest/components/realm-manageme...
Build goes smoothly and when I launch FVP to run the RME tests using the command line mentioned in the link, the FVP terminal_0 seems to be get stuck at the below line,
Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. NOTICE: Booting Trusted Firmware NOTICE: BL1: v2.7(debug):v2.7.0-235-g1631f9c75 NOTICE: BL1: Built : 11:44:37, Aug 22 2022 INFO: BL1: RAM 0x4035000 - 0x403c000 INFO: Loading image id=31 at address 0x4001010 INFO: Image id=31 loaded: 0x4001010 - 0x4001258 INFO: FCONF: Config file with image ID:31 loaded at address = 0x4001010 INFO: Loading image id=24 at address 0x4001300 INFO: Image id=24 loaded: 0x4001300 - 0x40015e4 INFO: FCONF: Config file with image ID:24 loaded at address = 0x4001300 INFO: BL1: Loading BL2 INFO: Loading image id=1 at address 0x4022000 INFO: Image id=1 loaded: 0x4022000 - 0x402cca1 NOTICE: BL1: Booting BL2 INFO: Entry point address = 0x4022000 INFO: SPSR = 0x3cd INFO: Configuring TrustZone Controller INFO: Total 6 regions set.
Both the tf-a-tests.git and trusted-firmware-a.git are master branch and I am using the FVP_Base_RevC-2xAEMvA v11.18.16.
I am totally new to this setup and maybe I am missing something here.
Appreciate any help to get this resolved or tips to debug further.
Thanks, Shameer