- TF-A - lists.trustedfirmware.org

by Alexei Fedorov

Hi, Please review and provide your comments for the patch which adds Event Log generation for the Measured Boot. https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3806 Thanks. Alexei IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

6 years

1
0
0 0

Re: [TF-A] [EXT] Patch-set review request: New NXP Platform LX2120ARDB support on TFA

by Pankaj Gupta

Please find the link to the review request. https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3370 Regards Pankaj From: Pankaj Gupta via TF-A Sent: Monday, 30 March, 22:57 Subject: [EXT] [TF-A] Patch-set review request: New NXP Platform LX2120ARDB support on TFA To: tf-a(a)lists.trustedfirmware.org Caution: EXT Email Hi All, Please pick this review request so that code changes can be merged before code freeze. Thanks. Regards Pankaj

6 years

1
0
0 0

Patch-set review request: New NXP Platform LX2120ARDB support on TFA

by Pankaj Gupta

Hi All, Please pick this review request so that code changes can be merged before code freeze. Thanks. Regards Pankaj

6 years

1
0
0 0

RFR: Tegra fixes for v2.3

by Varun Wadekar

Hello team, Please help review and merge the following bug fixes before v2.3 is released. * https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3731: Tegra: fixup GIC init from the 'on_finish' handler * https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3770: Tegra186: increase memory mapped regions Thanks. ----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. -----------------------------------------------------------------------------------

6 years

1
0
0 0

GICv3 driver makefile

by Alexei Fedorov

Hello, As the prepartion for the series of patches for adding GICv3.1 and GICv4 support, please review and provide your comments for the patch which introduces GICv3 makefile and adds configuration options for the driver. https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3754 Regards. Alexei IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

6 years

1
0
0 0

Re: [TF-A] Proposal for Measured Boot Implementation

by Alexei Fedorov

Hi Raghu, Thanks for reviewing the proposal. Please find my answers below. 1) The idea was to use the same hash algorithm throughout all TF-A code for consistency and not introduce any new build flags. One of the initial implementations even didn't calculate the hash itself but was reading verified data provided by the Chain of Trust (CoT) for the purpose of optimisation. Existing definition of TF_MBEDTLS_HASH_ALG_ID in 'drivers\auth\mbedtls\mbedtls_common.mk' at line #76: ifeq (${HASH_ALG}, sha384) TF_MBEDTLS_HASH_ALG_ID := TF_MBEDTLS_SHA384 else ifeq (${HASH_ALG}, sha512) TF_MBEDTLS_HASH_ALG_ID := TF_MBEDTLS_SHA512 else TF_MBEDTLS_HASH_ALG_ID := TF_MBEDTLS_SHA256 endif passed to 'include\drivers\auth\mbedtls\mbedtls_config.h', line #72 #define MBEDTLS_SHA256_C #if (TF_MBEDTLS_HASH_ALG_ID != TF_MBEDTLS_SHA256) #define MBEDTLS_SHA512_C #endif and used in Mbed TLS to define MBEDTLS_MD_MAX_SIZE in 'include\mbedtls\md.h': #if defined(MBEDTLS_SHA512_C) #define MBEDTLS_MD_MAX_SIZE 64 /* longest known is SHA512 */ #else #define MBEDTLS_MD_MAX_SIZE 32 /* longest known is SHA256 or less */ #endif makes impossible usage HASH_ALG=sha256 for TF-A and sha512 for Measured Boot calculations, because the following chain of function calls arm_bl1_set_bl2_hash() -> crypto_mod_calc_hash() -> crypto_lib_desc.calc_hash() -> calc_hash() -> mbedtls_md_info_from_type() returns CRYPTO_ERR_HASH error caused by insufficient space in internal Mbed TLS buffers and fixing this issue needs extra modifications in make and header files. Upgrading/changing the hash algorithm will require re-building of TF-A and re-flashing BL1 in ROM, so please explain what you mean by "potentially break measured boot on old devices in case a hash algorithm is broken" The functionality for getting the hash algorithm from the platform (e.g. eFuses) can be added later as a platform build option and requires fixing the issue described above. 2) Yes, Measured Boot requires TF-A built with TRUSTED_BOARD_BOOT option enabled, and as BL2 image is a part of CoT it is verified by BL1. 3) Yes. Event Log implementation is based on TCG Specifications. BL2 loads images, calculates their hashes and writes data into Event Log stored in Secure memory. 4) It is planned to add fTPM service implementation to TF-A, see Javier's message: https://lists.trustedfirmware.org/pipermail/tf-a/2020-March/000339.html Stuart could also comment on the naming convention. 5) N/A 6) Event Log is a complex structure with entries of different lengths, and TFTF test checks the length of each field against the remaining size of the Event Log's data to be processed before accessing and printing the actual data. Thanks. Alexei. ________________________________ From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> on behalf of Raghu Krishnamurthy via TF-A <tf-a(a)lists.trustedfirmware.org> Sent: 21 March 2020 05:53 To: tf-a(a)lists.trustedfirmware.org <tf-a(a)lists.trustedfirmware.org> Subject: Re: [TF-A] Proposal for Measured Boot Implementation Hi Alexei, Thanks. This looks good at first glance. However, i do have some questions that aren't obvious to me by reading the description below and looking at code. Questions are numbered based on your original email. Perhaps these can be discussed in the TF-A forum if it is inconvenient over email. 1) Would be good if the hash alg comes from the config file. This will make the implementation "crypto agile" from the very beginning. It is common to want to upgrade/change the hash algorithm and since BL1 is in ROM, you potentially break measured boot on old devices in case a hash algorithm is broken. The other option is to get the hash algorithm from the platform, perhaps a platform gets it from eFuses as opposed to config files. 2) It looks like you are using memory allocated in the loaded DTB as the equivalent of a TPM "PCR". How is this protected from direct modification by BL2? Or is it not protected because BL2 forms a part of the Root-of-Trust for Measurement(RTM)?(since it's signature is verified by BL1?) 3) What does "Event Log" refer to? Is it the same event log proposed by TCG in the platform firmware profile ? As a general question, how close is the measured boot in TF-A/PSA going to be to TCG ? Will BL2 extend measurements for other images ? 4) Would be great not to refer to "TPM" in the measured boot implementation. Here we are implementing measured boot without a TPM, but it could be implemented with a TPM. Maybe it should be tcg event log? 5) OK. 6) What does validate event log mean here? More details ? Thanks -Raghu On 3/20/20 7:15 AM, Alexei Fedorov via TF-A wrote: > Hello, > > I'm preparing the next set of patches for Measured Boot support in TF-A, > please find some details on design and implementation below. > > 1. SHA256/384/512 hash algorithm for Measured Boot related hash calculations > is passed as an existing build 'HASH_ALG' build parameter. > > 2. BL1 calculates BL2 image hash and passes these data to BL2 via > FW_CONFIG/TB_FW_CONFIG device tree in new 'bl2_hash_data' byte array > added > in 'fvp_fw_config.dts'. > > These changes are part of the patch under review, please see > https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3555 > > 3. Event Log is calculated by BL2 in Secure Memory and copied to > Non-secure memory. Address in Non-secure memory is calculated as: > > "nt_fw_config_addr + nt_fw_config_max_size" > > with values obtained from 'tb_fw_config': > > nt_fw_config_addr = <0x0 0x80000000>; > nt_fw_config_max_size = <0x200>; > > 4. Event Log address and size is passed by TOS_FW_CONFIG and NT_FW_CONFIG > device tree in 2 new added properties: > > Property name: 'tpm_event_log_addr' > Value type is an unsigned 64-bit integer specifying the physical address > of the Event Log. > > Property name: 'tpm_event_log_size' > Value type is an unsigned 32-bit integer specifying the size of the > Event Log. > > /* TPM Event Log Config */ > tpm_event_log { > compatible = "arm,nt_fw"; > tpm_event_log_addr = <0x0 0x0>; > tpm_event_log_size = <0x0>; > }; > > 5. TF-A provides Event Log to the BL33 (TFTF/UEFI/U-boot) in 'nt_fw_config' > device tree, which address is passed by BL31 as 'arg0' parameter, > see TFTF patch: > > https://review.trustedfirmware.org/c/TF-A/tf-a-tests/+/3327 > > 6. A new test which validates and prints Event Log data passed > in 'nt_fw_config' to BL33 will be added to TFTF. > > Please review and provide your comments on the proposed design. > > Regards. > Alexei. > > IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy > the information in any medium. Thank you. > -- TF-A mailing list TF-A(a)lists.trustedfirmware.org https://lists.trustedfirmware.org/mailman/listinfo/tf-a IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

6 years

3
7
0 0

Re: [TF-A] [TF-M] Project Maintenance Proposal for tf.org Projects

by Andrej Butok

Hello, >But I am worried that a self-review is rarely as good as a peer review On practice, unfortunately, some TF-M tasks are waiting weeks and even months for review and following approvals. If I were a maintainer & owner of my own TFM area, I do not want to wait & push & remind somebody else. Better to have a post-merge review for these cases, which does not limit and slow down the development. Thanks, Andrej Butok -----Original Message----- From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Sandrine Bailleux via TF-M Sent: Thursday, March 26, 2020 10:28 AM To: Christian Daudt <Christian.Daudt(a)cypress.com>; tf-a <tf-a(a)lists.trustedfirmware.org>; tf-m(a)lists.trustedfirmware.org; tsc(a)lists.trustedfirmware.org; op-tee(a)linaro.org Cc: nd(a)arm.com Subject: Re: [TF-M] Project Maintenance Proposal for tf.org Projects Hi Christian, Thanks a lot for the read and the comments! On 3/25/20 7:05 PM, Christian Daudt wrote: > ï¿½The maintenance proposal looks great ! I have some feedback on > specific portions: > ï¿½1. maintainer/owner/author patches. " Note that roles can be > cumulative, in particular the same individual can be both a code owner > and a maintainer. In such a scenario, the individual would be able to > self-merge a patch solely affecting his module, having the authority > to approve it from both a code owner and maintainer's point of view.": > I'm always leery of people self-approving their patches. At a minimum, > all self-patches should be published and a minimum wait time provided > for feedback. Or preferably that another maintainer does the merge (it > does not need to be mandated but should be suggested). Yes, actually this is something that generated some disagreement inside Arm as well and I am glad you're bringing this up here, as I'd like to hear more opinions on this. I too have concerns about allowing self-reviewing. I am not so much concerned about people potentially abusing of this situation to silently merge patches, as I think we should trust our maintainers. But I am worried that a self-review is rarely as good as a peer review, simply because it is so easy to miss things when it's your own work. I believe several pair of eyes is always better, as different people think differently, have different perspectives and backgrounds, and are able to catch different issues. But to pull this off, we need enough people to do all these reviews. The proposal currently allows self-review because some of us feared that mandating 2 reviewers for every patch (especially pure platform patches) would be impractical and too heavyweight, especially for the TF-M project in its current contributors organization, as I understand. It would be great to get more feedback from the TF-M community as to whether they think it could work in the end. It's a difficult balance between having the best possible code review practices, and realistically getting all the review work done in a timely manner, avoiding bottlenecks on specific people and keeping the flow of patches smooth. I like your idea of a minimum wait time provided for feedback. I think it could be a good middle ground solution. Your other suggestion of having a different maintainer doing the merge would work as well IMO but requires more workforce. Again this comes down to whether this can realistically be achieved for each project. This solution was actually suggested within Arm as well (and even called out at the end of the proposal ;) ). Bottom line is, in an ideal world I would like to condemn self-review because I consider this as bad practice, but I do not know whether this will be practical and will work for TF-M as well. > ï¿½2. 'timely manner': This expectation should be more explicit - > when the author can start requesting other maintainers to merge on > assumption that silence == approval (or not). Such timeliness > expectations are probably best set per project however. Yes, "timely manner" is definitely too vague and was actually left that way on purpose at this stage to avoid touching upon what I think is a sensitive subject! I am aware that some patches sometimes spend a long time in review, definitely longer than they should and it understandably generates some frustration. This is something we absolutely need to improve on IMO and hopefully a bigger pool of maintainers will help solve this issue. But I agree that the expected review timeline should be clearly established and it is probably best to let each project decides theirs. > ï¿½3. The proposal does not address branching strategies. i.e. will > there be separate maintainers for dev/master/stable branches? I don't > think it needs to address it yet - keep it simpler for a start. But a > todo saying something like "in the future this project maintenance > proposal might be expanded to address multi-branch maintainership" would be good. Good point. A todo sounds good, I will add one in the last section of the document. > ï¿½4. The platform lifecycle state machine has too many transitions. > "Fully maintained" <-> "orphan" -> "out" seems sufficient to me. Hmm OK. There might be too many transitions but I feel we need something between fully maintained and out, i.e. the limited support one. Julius Werner also pointed out on Thursday that orphan might be misplaced, as all these other stages deal with some degrees of feature support (what's known to work), whereas orphan is an orthogonal topic that is not directly related to the level of supported features. For example, a platform could have recently become orphan but all features and tests still work for some time. Regards, Sandrine -- TF-M mailing list TF-M(a)lists.trustedfirmware.org https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.tru…

6 years

1
0
0 0

fTPM service implementation to test Measured Boot

by Javier Almansa Sobrino

Hello, Following up with the Proposal for Measured Boot Implementation described in https://lists.trustedfirmware.org/pipermail/tf-a/2020-March/000332.html , I am working on the implementation of a test fTPM service to exercise Measured Boot on TF-A. Some details about the implementation can be found below: 1.- The service will be based on Microsoft's reference implementation of the TPM 2.0 Specification by TCG. It will be implemented as an OP- TEE TA. 2.- During service initialisation, the fTPM service will read the TPM Event Log stored by Measured Boot in Secure Memory and it will extend it into the PCR specified by the log header. 3.- Alongside with the fTPM service, a test framework based on OP-TEE Toolkit is being implemented as well. This test framework will generate and run a Linux/Buildroot environment over a Foundation Model so the fTPM's PCRs can be accessed to verify its content. It is important here to highlight that this fTPM service and the related test framework are meant to be used only for demonstration purposes, it is not meant to be used as a production implementation. Please, let me know any comment or query you might have with regards this. Best regards, Javier

6 years

1
0
0 0

Forthcoming Trusted Firmware-A 2.3 release

by Bipin Ravi

Hi, This is to notify that we are planning to target the Trusted Firmware-A 2.3 release during the third week of April as part of the regular 6 month cadence. The aim is to consolidate all TF-A work since the 2.2 release. As part of this, a release candidate tag will be created and release activities will commence from Monday April 6th. Essentially we will not merge any major enhancements from this date until the release is made. Please ensure any Pull Requests (PR's) desired to make the 2.2 release are submitted in good time to be complete by Friday April 3rd. Any major enhancement PR's still open after that date will not be merged until after the release. Thanks & best regards, [cid:image001.jpg@01D5F78C.8108B010] Bipin Ravi | Principal Design Enginee Bipin.ravi(a)arm.com<mailto:Bipin.ravi@arm.com> | Skype: Bipin.Ravi.ARM Direct: +1-512-225 -1071 | Mobile: +1-214-212-0794 5707 Southwest Parkway, Suite 100, Austin, TX 78735

6 years

1
1
0 0

Project Maintenance Proposal for tf.org Projects

by Sandrine Bailleux

Hello all, As the developers community at trustedfirmware.org is growing, there is an increasing need to have work processes that are clearly documented, feel smooth and scale well. We think that there is an opportunity to improve the way the trustedfirmware.org projects are managed today. That's why we are sharing a project maintenance proposal, focusing on the TF-A and TF-M projects initially. The aim of this document is to propose a set of rules, guidelines and processes to try and improve the way we work together as a community today. Note that this is an early draft at this stage. This is put up for further discussion within the trustedfirmware.org community. Nothing is set in stone yet and it is expected to go under change as feedback from the community is incorporated. Please find the initial proposal here: https://developer.trustedfirmware.org/w/collaboration/project-maintenance-p… Please provide any feedback you may have by replying to this email thread, keeping all 4 mailing lists in the recipients list. I will collate comments from the community and try to incorporate them in the document, keeping you updated on changes made between revisions. Regards, Sandrine

6 years

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

TF-A