December 2020 - TF-A - lists.trustedfirmware.org

[PATCH] arm-virt: add secure pl061 for reset/power down

by Maxim Uvarov

Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Use the same gpio 3 and gpio 4 which were used by non acpi variant of linux power control gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov(a)linaro.org> --- This patch works together with ATF patch: https://github.com/muvarov/arm-trusted-firmware/commit/dd4401d8eb8e0f3018b3… Previus discussion for reboot issue was here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg757705.html Regards, Maxim. hw/arm/Kconfig | 1 + hw/arm/virt.c | 24 +++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/gpio_pwr.c | 83 +++++++++++++++++++++++++++++++++++++++++++ hw/gpio/meson.build | 1 + include/hw/arm/virt.h | 1 + 6 files changed, 113 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 0a242e4c5d..13cc42dcc8 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -17,6 +17,7 @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 96985917d3..eff0345303 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -147,6 +147,7 @@ static const MemMapEntry base_memmap[] = { [VIRT_RTC] = { 0x09010000, 0x00001000 }, [VIRT_FW_CFG] = { 0x09020000, 0x00000018 }, [VIRT_GPIO] = { 0x09030000, 0x00001000 }, + [VIRT_SECURE_GPIO] = { 0x09031000, 0x00001000 }, [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, [VIRT_SMMU] = { 0x09050000, 0x00020000 }, [VIRT_PCDIMM_ACPI] = { 0x09070000, MEMORY_HOTPLUG_IO_LEN }, @@ -189,6 +190,7 @@ static const int a15irqmap[] = { [VIRT_GPIO] = 7, [VIRT_SECURE_UART] = 8, [VIRT_ACPI_GED] = 9, + [VIRT_SECURE_GPIO] = 10, [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */ [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */ [VIRT_SMMU] = 74, /* ...to 74 + NUM_SMMU_IRQS - 1 */ @@ -864,6 +866,24 @@ static void create_gpio(const VirtMachineState *vms) g_free(nodename); } +static void create_gpio_secure(const VirtMachineState *vms) +{ + DeviceState *pl061_dev; + static DeviceState *gpio_pwr_dev; + + hwaddr base = vms->memmap[VIRT_SECURE_GPIO].base; + int irq = vms->irqmap[VIRT_SECURE_GPIO]; + + pl061_dev = sysbus_create_simple("pl061", base, + qdev_get_gpio_in(vms->gic, irq)); + + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qdev_connect_gpio_out(pl061_dev, 3, qdev_get_gpio_in(gpio_pwr_dev, 3)); + qdev_connect_gpio_out(pl061_dev, 4, qdev_get_gpio_in(gpio_pwr_dev, 4)); +} + static void create_virtio_devices(const VirtMachineState *vms) { int i; @@ -1993,6 +2013,10 @@ static void machvirt_init(MachineState *machine) create_gpio(vms); } + if (vms->secure) { + create_gpio_secure(vms); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index b6fdaa2586..f0e7405f6e 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -8,5 +8,8 @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index 0000000000..dded12381b --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -0,0 +1,83 @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov(a)linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; + qemu_irq irq; +}; + +static void gpio_pwr_set_irq(void *opaque, int irq, int level) +{ + GPIO_PWR_State *s = (GPIO_PWR_State *)opaque; + + qemu_set_irq(s->irq, 1); + + if (level) { + return; + } + + switch (irq) { + case 3: + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + break; + case 4: + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + break; + default: + printf("qemu; gpio_pwr: unknown interrupt %d lvl %d\n", + irq, level); + } +} + + +static void gpio_pwr_realize(DeviceState *dev, Error **errp) +{ + GPIO_PWR_State *s = GPIOPWR(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + sysbus_init_irq(sbd, &s->irq); + qdev_init_gpio_in(dev, gpio_pwr_set_irq, 8); +} + +static void gpio_pwr_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = gpio_pwr_realize; +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .class_init = gpio_pwr_class_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index 5c0a7d7b95..79568f00ce 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -1,5 +1,6 @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index abf54fab49..77a4523cc7 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -81,6 +81,7 @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, -- 2.17.1

3 years, 10 months

2
1
0 0

Build error with GCC 10.2-2020.11

by Manish Badarkhe

Hi Carlo Alexei created a patch for testing TF-A/TFTF builds with the toolchain GCC 10.2-2020.11 https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/7733 which flagged build errors for plat/amlogic/axg platform, please see below: Build command lines: make CROSS_COMPILE=aarch64-none-elf- PLAT=axg SPD=opteed DEBUG=1 V=1 fiptool all make AML_USE_ATOS=1 CROSS_COMPILE=aarch64-none-elf- PLAT=axg DEBUG=1 V=1 fiptool all plat/amlogic/axg/axg_pm.c: In function 'axg_pwr_domain_off': plat/amlogic/axg/axg_pm.c:124:43: error: array subscript 2 is above array bounds of 'const plat_local_state_t[2]' {aka 'const unsigned char[2]'} [-Werror=array-bounds] 124 | if (target_state->pwr_domain_state[MPIDR_AFFLVL2] == | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~ In file included from plat/amlogic/axg/axg_pm.c:14: include/lib/psci/psci.h:270:28: note: while referencing 'pwr_domain_state' 270 | plat_local_state_t pwr_domain_state[PLAT_MAX_PWR_LVL + U(1)]; | ^~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Makefile:1103: recipe for target '/work/workspace/workspace/tf-worker/trusted_firmware/build/axg/debug/bl31/axg_pm.o' failed make: *** [/work/workspace/workspace/tf-worker/trusted_firmware/build/axg/debug/bl31/axg_pm.o] Error 1 Please help to resolve this issue. Thanks Manish Badarkhe

3 years, 11 months

1
0
0 0

Re: [TF-A] Interrupt about ff-a spec

by Achin Gupta

Hi Feng, On Fri, Dec 18, 2020 at 04:41:37PM +0000, Chen Feng via TF-A wrote: > Hi, > > While reading the Arm Firmware Framework for Armv8-A > https://developer.arm.com/documentation/den0077/latest > > I do not find the API that for a sp to request vIRQ, or do I miss something. > > Is this some private API that is implementing defined FF-A IDs? Is what you have in mind is an ABI that allows SP0 to raise an interrupt in SP1? Could you please provide more information about your use case? cheers, Achin > > > -- > cheers, > feng > > -- > TF-A mailing list > TF-A(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/tf-a

3 years, 11 months

3
3
0 0

Re: [TF-A] Does TF-A support to load and run both TEE and SPM_MM?

by Chen Feng

Hi all, I have a similar but different question here :) Why not the tf-a support both smpd and tspd. Since the vendor's teeos that has not support ff-a interface currently. With armv8.4-sel2, is there a choice to disable scr.eel2 with origin vendor's theeos IDs, and enable scr.eel2 with new ff-a services? It seems to need some tlb maintenance, but it seems work. On 2020/11/23 3:27 下午, Achin Gupta via TF-A wrote: > Hi Heyi, > > Happy to discuss the detail but the short answer is no. > > Instead, it is possible to run an MM partition in S-EL0 under the TEE. This work is being done with OP-TEE. > > From a SW architecture standpoint, it did not seem like a good idea to let EL3 run its "application" i.e. MM SP alongside a TEE which also runs its own applications. It is better to let the TEE own S-EL1 and run all applications in S-EL0 under it. > > Cheers, > Achin > > On 23/11/2020, 05:36, "TF-A on behalf of Heyi Guo via TF-A" <tf-a-bounces(a)lists.trustedfirmware.org on behalf of tf-a(a)lists.trustedfirmware.org> wrote: > > Hi All, > > On some platforms there may be requirements to run both TEE and SPM_MM > instances, such as providing TEE services on server platforms. > > Do TF-A support this scenario? If it doesn't, do it make sense to add > such support? > > Thanks, > > Heyi > > -- > TF-A mailing list > TF-A(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/tf-a > -- cheers, feng

3 years, 11 months

2
3
0 0

Interrupt about ff-a spec

by Chen Feng

Hi, While reading the Arm Firmware Framework for Armv8-A https://developer.arm.com/documentation/den0077/latest I do not find the API that for a sp to request vIRQ, or do I miss something. Is this some private API that is implementing defined FF-A IDs? -- cheers, feng

3 years, 11 months

1
0
0 0

TF-A Tech Forum Agenda @ Thr 17th December 2020 16:00-1700 GMT: Introduction to the Trusted Services project

by Joanna Farley

Hi All, The next TF-A Tech Forum is scheduled for Thu 17th December 2020 16:00 – 17:00 (GMT). As well as being posted to the TF-A mailing list this has been cross posted to OPTEE mailing list. For OPTEE attendees the Zoom call details are included below. Agenda: * An introduction to the Trusted Services project * Presented by Julian Hall * Summary * The Trusted Services project is a new trustedfirmware.org project that provides a home for security related service components that can run in the different isolated processing environments available on Arm Cortex-A. The project attempts to promote reuse and standardization to enable a consistent set of services to be provided by firmware, independent of which isolation technology is used. If TF-A contributors have anything they wish to present at any future TF-A tech forum please contact me to have that scheduled. Previous sessions, both recording and presentation material can be found on the trustedfirmware.org TF-A Technical meeting webpage: https://www.trustedfirmware.org/meetings/tf-a-technical-forum/ A scheduling tracking page is also available to help track sessions suggested and being prepared: https://developer.trustedfirmware.org/w/tf_a/tf-a-tech-forum-scheduling/ Final decisions on what will be presented will be shared a few days before the next meeting and shared on the TF-A mailing list. This is the last TF-A Tech Forum session until January 2021. Join Zoom Meeting https://zoom.us/j/9159704974<https://www.google.com/url?q=https%3A%2F%2Fzoom.us%2Fj%2F9159704974&sa=D&us…> Meeting ID: 915 970 4974 One tap mobile +16465588656,,9159704974# US (New York) +16699009128,,9159704974# US (San Jose) Dial by your location +1 646 558 8656 US (New York) +1 669 900 9128 US (San Jose) 877 853 5247 US Toll-free 888 788 0099 US Toll-free Meeting ID: 915 970 4974 Find your local number: https://zoom.us/u/ad27hc6t7h<https://www.google.com/url?q=https%3A%2F%2Fzoom.us%2Fu%2Fad27hc6t7h&sa=D&us…> Thanks Joanna

3 years, 11 months

1
0
0 0

Re: [TF-A] Question about validity period of X509 certificate

by Andrej Butok

Hello Masato Fukumori, To check a "validity period" of a X 509 certificate, you must be sure that your system date & time is set, correct and not changed. Do you have a reliable way to achieve this? Best regards, Andrej Butok From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> On Behalf Of fukumori.masato--- via TF-A Sent: Thursday, December 10, 2020 2:23 PM To: 'tf-a(a)lists.trustedfirmware.org' <tf-a(a)lists.trustedfirmware.org> Subject: [TF-A] Question about validity period of X509 certificate Hello. I have a question about checking the X 509 certificate with tf-a. My understanding is that tf-a does not check the "validity period" of the X 509 certificate. I 'm not sure why tf-a doesn't check. Does anyone know this background? Best Regards, Masato Fukumori

3 years, 11 months

2
4
0 0

Question about validity period of X509 certificate

by fukumori.masato＠fujitsu.com

Hello. I have a question about checking the X 509 certificate with tf-a. My understanding is that tf-a does not check the "validity period" of the X 509 certificate. I 'm not sure why tf-a doesn't check. Does anyone know this background? Best Regards, Masato Fukumori

3 years, 11 months

1
0
0 0

New Defects reported by Coverity Scan for ARM-software/arm-trusted-firmware

by scan-admin＠coverity.com

Hi, Please find the latest report on new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. 3 new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. 1 defect(s), reported by Coverity Scan earlier, were marked fixed in the recent build analyzed by Coverity Scan. New defect(s) Reported-by: Coverity Scan Showing 3 of 3 defect(s) ** CID 364146: Control flow issues (DEADCODE) /plat/mediatek/mt8192/plat_pm.c: 301 in plat_validate_power_state() ________________________________________________________________________________________________________ *** CID 364146: Control flow issues (DEADCODE) /plat/mediatek/mt8192/plat_pm.c: 301 in plat_validate_power_state() 295 { 296 unsigned int pstate = psci_get_pstate_type(power_state); 297 unsigned int aff_lvl = psci_get_pstate_pwrlvl(power_state); 298 unsigned int cpu = plat_my_core_pos(); 299 300 if (aff_lvl > PLAT_MAX_PWR_LVL) { >>> CID 364146: Control flow issues (DEADCODE) >>> Execution cannot reach this statement: "return -2;". 301 return PSCI_E_INVALID_PARAMS; 302 } 303 304 if (pstate == PSTATE_TYPE_STANDBY) { 305 req_state->pwr_domain_state[0] = PLAT_MAX_RET_STATE; 306 } else { ** CID 364145: Integer handling issues (NO_EFFECT) /plat/mediatek/mt8192/drivers/ptp3/mtk_ptp3_main.c: 42 in ptp3_init() ________________________________________________________________________________________________________ *** CID 364145: Integer handling issues (NO_EFFECT) /plat/mediatek/mt8192/drivers/ptp3/mtk_ptp3_main.c: 42 in ptp3_init() 36 * API 37 ************************************************/ 38 void ptp3_init(unsigned int core) 39 { 40 unsigned int _core; 41 >>> CID 364145: Integer handling issues (NO_EFFECT) >>> This greater-than-or-equal-to-zero comparison of an unsigned value is always true. "core >= 0U". 42 if (core >= PTP3_CFG1_CPU_START_ID) { 43 if (core < NR_PTP3_CFG1_CPU) { 44 /* update ptp3_cfg1 */ 45 ptp3_write( 46 ptp3_cfg1[core][PTP3_CFG_ADDR], 47 ptp3_cfg1[core][PTP3_CFG_VALUE]); ** CID 364144: Integer handling issues (NO_EFFECT) /plat/mediatek/mt8192/drivers/ptp3/mtk_ptp3_main.c: 76 in ptp3_deinit() ________________________________________________________________________________________________________ *** CID 364144: Integer handling issues (NO_EFFECT) /plat/mediatek/mt8192/drivers/ptp3/mtk_ptp3_main.c: 76 in ptp3_deinit() 70 } 71 } 72 } 73 74 void ptp3_deinit(unsigned int core) 75 { >>> CID 364144: Integer handling issues (NO_EFFECT) >>> This greater-than-or-equal-to-zero comparison of an unsigned value is always true. "core >= 0U". 76 if (core >= PTP3_CFG1_CPU_START_ID) { 77 if (core < NR_PTP3_CFG1_CPU) { 78 /* update ptp3_cfg1 */ 79 ptp3_write( 80 ptp3_cfg1[core][PTP3_CFG_ADDR], 81 ptp3_cfg1[core][PTP3_CFG_VALUE] & 82 ~PTP3_CFG1_MASK); 83 } 84 } ________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=HRESupC-2F2Czv4BOaCWWCy7my0P…

3 years, 11 months

1
0
0 0

Cancelled event: TF-A Tech Forum @ Thu 31 Dec 2020 16:00 - 17:00 (GMT) (tf-a@lists.trustedfirmware.org)

by Bill Fletcher

This event has been cancelled. Title: TF-A Tech Forum We run an open technical forum call for anyone to participate and it is not restricted to Trusted Firmware project members. It will operate under the guidance of the TF TSC. Feel free to forward this invite to colleagues. Invites are via the TF-A mailing list and also published on the Trusted Firmware website. Details are here: https://www.trustedfirmware.org/meetings/tf-a-technical-forum/Tr… Firmware is inviting you to a scheduled Zoom meeting.Join Zoom Meetinghttps://zoom.us/j/9159704974Meeting ID: 915 970 4974One tap mobile+16465588656,,9159704974# US (New York)+16699009128,,9159704974# US (San Jose)Dial by your location        +1 646 558 8656 US (New York)        +1 669 900 9128 US (San Jose)        877 853 5247 US Toll-free        888 788 0099 US Toll-freeMeeting ID: 915 970 4974Find your local number: https://zoom.us/u/ad27hc6t7h   When: Thu 31 Dec 2020 16:00 – 17:00 United Kingdom Time Calendar: tf-a(a)lists.trustedfirmware.org Who: * Bill Fletcher- creator * marek.bykowski(a)gmail.com * okash.khawaja(a)gmail.com * tf-a(a)lists.trustedfirmware.org Invitation from Google Calendar: https://calendar.google.com/calendar/ You are receiving this courtesy email at the account tf-a(a)lists.trustedfirmware.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively, you can sign up for a Google Account at https://calendar.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to send a response to the organiser and be added to the guest list, invite others regardless of their own invitation status or to modify your RSVP. Learn more at https://support.google.com/calendar/answer/37135#forwarding

3 years, 11 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

TF-A December 2020