- TF-A - lists.trustedfirmware.org

MISRA C compliance spreadsheet access permission

by Lim, Jit Loon

Hi TF-A committee, We are trying to access to the MISRA C spreadsheet mentioned over here. [cid:image001.jpg@01D806BE.A535F7C0] https://developer.trustedfirmware.org/file/download/lamajxif3w7c4mpjeoo5/PH… However, we are facing issue to open the spreadsheet and we are getting "Invalid Authorization". [cid:image002.jpg@01D806BE.A535F7C0] After we click on the "Continue", the website show Restricted File and we have no access permission. [cid:image003.jpg@01D806BE.A535F7C0] Thus, we would like to get your help to assist us on how to obtain the spreadsheet. Hope to hear from you soon. Thanks Best Regards JL Lim (Benjamin)

3 years, 5 months

2
2
0 0

A problem about assert failed in TF-A

by Chenxu Wang

Hi all, I am running FVP with 2CPUs, Cactus SP (SEL1), Hafnium (SEL2) and KVM VHE. Sometimes I send the "FFA_MSG_SEND_DIRECT_REQ" smc call from KVM (I fill 0x8400006f in x0, then VMID and SP ID in x1, let x2 as 0). It says assert failed, like this: ASSERT: lib/el3_runtime/aarch64/context_mgmt.c:651 BACKTRACE: START: assert 0: EL3: 0x4005cac 1: EL3: 0x400323c 2: EL3: 0x400620c 3: EL3: 0x400e180 4: EL3: 0x4005a94 BACKTRACE: END: assert After I check the bl31.dump, I notice that: when services/std_svc/spmd/spmd_main.c sends the FFA call (from NS to S) via "spmd_smc_forward(smc_fid, secure_origin,x1, x2, x3, x4, handle)", it will go to cm_el1_sysregs_context_restore(secure_state_out) and cm_el2_sysregs_context_restore(secure_state_out), then it will assert the cm_get_context(). it gets the NULL context, so assert failed. Before the problem appeared, I have modified many codes on a dirty TF-A v2.4 (commit hash is 0aa70f4c4c023ca58dea2d093d3c08c69b652113), Hafnium and TF-A-TESTS. I also mail with Hafnium MailList, they consider it can be a problem in EL3. Such assert is NOT ALWAYS failed. I mean, maybe when I run FVP and send "smc" now, it is failed. But when I shut down, run FVP, and send the same instruction with the same parameter again, it is OK. I want to know, what is the possible reasons for suddenly losing the secure context. Can you give me some advice on debugging? e.g., where should I check? Need I provide more info? Sincerely, Wang

3 years, 5 months

3
4
0 0

New Defects reported by Coverity Scan for ARM-software/arm-trusted-firmware

by scan-admin＠coverity.com

Hi, Please find the latest report on new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. 1 new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. New defect(s) Reported-by: Coverity Scan Showing 1 of 1 defect(s) ** CID 374565: Error handling issues (CHECKED_RETURN) /drivers/st/mmc/stm32_sdmmc2.c: 176 in stm32_sdmmc2_init() ________________________________________________________________________________________________________ *** CID 374565: Error handling issues (CHECKED_RETURN) /drivers/st/mmc/stm32_sdmmc2.c: 176 in stm32_sdmmc2_init() 170 171 mmio_write_32(base + SDMMC_POWER, 172 SDMMC_POWER_PWRCTRL_PWR_CYCLE | sdmmc2_params.dirpol); 173 mdelay(POWER_CYCLE_DELAY); 174 175 if (sdmmc2_params.vmmc_regu != NULL) { >>> CID 374565: Error handling issues (CHECKED_RETURN) >>> Calling "regulator_enable" without checking return value (as is done elsewhere 6 out of 7 times). 176 regulator_enable(sdmmc2_params.vmmc_regu); 177 } 178 179 mdelay(VCC_POWER_ON_DELAY); 180 181 mmio_write_32(base + SDMMC_POWER, sdmmc2_params.dirpol); ________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=HRESupC-2F2Czv4BOaCWWCy7my0P…

3 years, 6 months

1
0
0 0

How to change the address of region "RAM" in BL31?

by Chenxu Wang

Hi all, I want to add some big data structures in BL31 (e.g., create a large uint32_t array). Also, I reserve a secure memory space (assume it is 0xa000_0000 - 0xb000_0000) by configuring TZASC. Now, the BL31 says build/fvp/debug/bl31/bl31.elf section `.bss' will not fit in region `RAM' aarch64-none-elf-ld: BL31 image has exceeded its limit. aarch64-none-elf-ld: region `RAM' overflowed by 458752 bytes It looks like that the previous RAM cannot hold my big data structures. If I want to add my reserved region into RAM (so I may allocate these data into the reserved region), what should I do? Sincerely, Wang

3 years, 6 months

2
1
0 0

Re: [TF-A] [TF-M] Tip on cloning TF-M on OS X Monterey

by Gyorgy Szing

Hi, Please allow me to add some more details. Also posting to the TF-A list, as all tf.org repositories are affected. The root cause of this issue is OpenSSH dropping support for SHA-1 RSA signatures with the 8.8 release, and thus any OS (or git client) coming with a recent version is affected. I.e. the newest git for windows is affected too, and so are “top notch” Linux distributions like Arch. For details see the “Potentially-incompatible changes” chapter here: https://www.openssh.com/releasenotes.html As the above page states “Incompatibility is more likely when connecting to older SSH implementations…”, and thus a server-side update would eliminate the problem. Till that happens the page above list multiple client-side workarounds. (It is possible to amend the ssh config in a way that fixes all repositories.) /George From: TF-M <tf-m-bounces(a)lists.trustedfirmware.org> On Behalf Of Kevin Townsend via TF-M Sent: December 15, 2021 13:06 To: Thomas Törnblom via TF-M <tf-m(a)lists.trustedfirmware.org> Subject: [TF-M] Tip on cloning TF-M on OS X Monterey I recently switched to a new MBP that ships with OS X Monterey, and on both 12.0 and 12.1 (released this week) git clone seems to be broken when you're using HTTP rather than SSH: digital envelope routines:CRYPTO_internal:bad key length In order to clone TF-M, I had to make the following changes. 1. Add these details to $HOME/.ssh/config (microbuilder being my github username, associated with my TF-M account): Host trustedfirmware.org<http://trustedfirmware.org> User microbuilder Hostname review.trustedfirmware.org<http://review.trustedfirmware.org> Port 29418 IdentityFile ~/.ssh/id_rsa IdentitiesOnly yes 2. Then try to clone with: $ git clone trustedfirmware.org:/TF-M/trusted-firmware-m.git This fails, however, since it tries to clone tf-m-tests.git, so: 3. Edit lib/ext/tf-m-tests/fetch_repo.cmake, changing: FetchContent_Declare(tfm_test_repo GIT_REPOSITORY trustedfirmware.org:TF-M/tf-m-tests.git # GIT_REPOSITORY https://git.trustedfirmware.org/TF-M/tf-m-tests.git GIT_TAG ${TFM_TEST_REPO_VERSION} GIT_PROGRESS TRUE ) This let me at least clone TF-M until the issues with HTTP-based cloning are fixed. Hope this is useful to someone else working on OS X natively. Kevin

3 years, 6 months

1
0
0 0

FCONF warning for TOS_FW_CONFIG

by Yann Gautier

Hi, On STM32MP1, we'd like BL2 to be agnostic of what BL32 is in the FIP. It can be either OP-TEE or TF-A SP_min. But on STM32MP1, SP_min needs a device tree file (TOS_FW_CONFIG_ID), whereas OP-TEE doesn't use this separate DT image. As TOS_FW_CONFIG_ID is in list of images to be loaded by BL2, we then have a warning message in case OP-TEE is used: WARNING: FCONF: Invalid config id 26 I'd like to silence this warning with this kind of patch: diff --git a/lib/fconf/fconf_dyn_cfg_getter.c b/lib/fconf/fconf_dyn_cfg_getter.c index 25dd7f9eda..f7e9834c3b 100644 --- a/lib/fconf/fconf_dyn_cfg_getter.c +++ b/lib/fconf/fconf_dyn_cfg_getter.c @@ -51,7 +51,11 @@ struct dyn_cfg_dtb_info_t *dyn_cfg_dtb_info_getter(unsigned int config_id) } } - WARN("FCONF: Invalid config id %u\n", config_id); + if (config_id == TOS_FW_CONFIG_ID) { + VERBOSE("FCONF: No TOS_FW_CONFIG image\n"); + } else { + WARN("FCONF: Invalid config id %u\n", config_id); + } return NULL; } I can change the VERBOSE message to INFO. Do you think it is OK if I push the patch? Thanks, Yann

3 years, 6 months

2
6
0 0

Cancelling Tech-Forums 16th and 30th December 2021

by Joanna Farley

I’m not sure if the cancellations have been sent from the trustedfirmware.org calendar system so confirming that they are cancelled to the list. Next scheduled Tech Forum is 13th January 2022. Joanna

3 years, 6 months

1
0
0 0

How to load some images in BL31?

by Chenxu Wang

Hi all, I want to load a specific image in BL31. But when I call load_auth_image(). It says "in function `load_image': trusted-firmware-a/common/bl_common.c:87: undefined reference to `plat_get_image_source'" Also, the io_read, io_size and etc. are undefined reference. I find other BL files (bl1, bl2) will call the load_auth_image() in their main functions or sub-functions. If I want to implement it on BL31, what should I do? Should I modify the Makefile? Sincerely, Wang

3 years, 6 months

2
1
0 0

Re: [TF-A] Invitation: TF-A Tech Forum @ Every 2 weeks from 16:00 to 17:00 on Thursday (BST) (tf-a@lists.trustedfirmware.org)

by Joanna Farley

Hi Everyone, this is the TF-A Tech Forum meeting agenda for this week. Thanks Joanna Subject: ‘Measured Boot Driver - refactor and Critical Data measurement design’ Presented by: Manish Badarkhe 1. A brief overview of Measured Boot driver refactoring done in TF-A Bootloader 2. Discuss a few gaps observed in the Measured Boot driver and patches up-streamed for it 3. Discuss the list of critical data observed in TF-A firmware and its measurement design From: linaro.org_havjv2figrh5egaiurb229pd8c(a)group.calendar.google.com When: 16:00 - 17:00 2 December 2021 Subject: [TF-A] Invitation: TF-A Tech Forum @ Every 2 weeks from 16:00 to 17:00 on Thursday (BST) (tf-a(a)lists.trustedfirmware.org) Regular bi weekly Trustedfirmware.org TF-A TechForum. I host this and its where we go to our community and present/discuss things live in public. Past sessions listed here https://www.trustedfirmware.org/meetings/tf-a-technical-forum/ Mailing list here if you want to subscribe. https://lists.trustedfirmware.org/mailman/listinfo/tf-a Project page here: https://www.trustedfirmware.org/projects/tf-a/ Abhishek never attended any of these. Cancelled if there is no topic to present. From: linaro.org_havjv2figrh5egaiurb229pd8c(a)group.calendar.google.com When: 16:00 - 17:00 18 June 2020 Subject: [TF-A] Invitation: TF-A Tech Forum @ Every 2 weeks from 16:00 to 17:00 on Thursday (BST) (tf-a(a)lists.trustedfirmware.org) You have been invited to the following event. TF-A Tech Forum When Every 2 weeks from 16:00 to 17:00 on Thursday United Kingdom Time Calendar tf-a(a)lists.trustedfirmware.org Who • Bill Fletcher- creator • tf-a(a)lists.trustedfirmware.org more details »<https://www.google.com/calendar/event?action=VIEW&eid=NWlub3Ewdm1tMmk1cTJrM…> We run an open technical forum call for anyone to participate and it is not restricted to Trusted Firmware project members. It will operate under the guidance of the TF TSC. Feel free to forward this invite to colleagues. Invites are via the TF-A mailing list and also published on the Trusted Firmware website. Details are here: https://www.trustedfirmware.org/meetings/tf-a-technical-forum/<https://www.google.com/url?q=https%3A%2F%2Fwww.trustedfirmware.org%2Fmeetin…> Trusted Firmware is inviting you to a scheduled Zoom meeting. Join Zoom Meeting https://zoom.us/j/9159704974<https://www.google.com/url?q=https%3A%2F%2Fzoom.us%2Fj%2F9159704974&sa=D&us…> Meeting ID: 915 970 4974 One tap mobile +16465588656,,9159704974# US (New York) +16699009128,,9159704974# US (San Jose) Dial by your location +1 646 558 8656 US (New York) +1 669 900 9128 US (San Jose) 877 853 5247 US Toll-free 888 788 0099 US Toll-free Meeting ID: 915 970 4974 Find your local number: https://zoom.us/u/ad27hc6t7h<https://www.google.com/url?q=https%3A%2F%2Fzoom.us%2Fu%2Fad27hc6t7h&sa=D&us…> Going (tf-a(a)lists.trustedfirmware.org)? All events in this series: Yes<https://www.google.com/calendar/event?action=RESPOND&eid=NWlub3Ewdm1tMmk1cT…> - Maybe<https://www.google.com/calendar/event?action=RESPOND&eid=NWlub3Ewdm1tMmk1cT…> - No<https://www.google.com/calendar/event?action=RESPOND&eid=NWlub3Ewdm1tMmk1cT…> more options »<https://www.google.com/calendar/event?action=VIEW&eid=NWlub3Ewdm1tMmk1cTJrM…> Invitation from Google Calendar<https://www.google.com/calendar/> You are receiving this courtesy email at the account tf-a(a)lists.trustedfirmware.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively, you can sign up for a Google Account at https://www.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to send a response to the organiser and be added to the guest list, invite others regardless of their own invitation status or to modify your RSVP. Learn more<https://support.google.com/calendar/answer/37135#forwarding>. ________________________________ From: Trusted Firmware Public Meetings Sent: Sunday, June 14, 2020 5:21:25 PM (UTC) Coordinated Universal Time To: Trusted Firmware Public Meetings; tf-a(a)lists.trustedfirmware.org Subject: [TF-A] Invitation: TF-A Tech Forum @ Every 2 weeks from 16:00 to 17:00 on Thursday (BST) (tf-a(a)lists.trustedfirmware.org) When: Occurs on Thursday every other week from 4:00 PM to 5:00 PM effective 6/18/2020. Europe/London Where: You have been invited to the following event. TF-A Tech Forum When Every 2 weeks from 16:00 to 17:00 on Thursday United Kingdom Time Calendar tf-a(a)lists.trustedfirmware.org Who • Bill Fletcher- creator • tf-a(a)lists.trustedfirmware.org more details »<https://www.google.com/calendar/event?action=VIEW&eid=NWlub3Ewdm1tMmk1cTJrM…> We run an open technical forum call for anyone to participate and it is not restricted to Trusted Firmware project members. It will operate under the guidance of the TF TSC. Feel free to forward this invite to colleagues. Invites are via the TF-A mailing list and also published on the Trusted Firmware website. Details are here: https://www.trustedfirmware.org/meetings/tf-a-technical-forum/<https://www.google.com/url?q=https%3A%2F%2Fwww.trustedfirmware.org%2Fmeetin…> Trusted Firmware is inviting you to a scheduled Zoom meeting. Join Zoom Meeting https://zoom.us/j/9159704974<https://www.google.com/url?q=https%3A%2F%2Fzoom.us%2Fj%2F9159704974&sa=D&us…> Meeting ID: 915 970 4974 One tap mobile +16465588656,,9159704974# US (New York) +16699009128,,9159704974# US (San Jose) Dial by your location +1 646 558 8656 US (New York) +1 669 900 9128 US (San Jose) 877 853 5247 US Toll-free 888 788 0099 US Toll-free Meeting ID: 915 970 4974 Find your local number: https://zoom.us/u/ad27hc6t7h<https://www.google.com/url?q=https%3A%2F%2Fzoom.us%2Fu%2Fad27hc6t7h&sa=D&us…> Going (tf-a(a)lists.trustedfirmware.org)? All events in this series: Yes<https://www.google.com/calendar/event?action=RESPOND&eid=NWlub3Ewdm1tMmk1cT…> - Maybe<https://www.google.com/calendar/event?action=RESPOND&eid=NWlub3Ewdm1tMmk1cT…> - No<https://www.google.com/calendar/event?action=RESPOND&eid=NWlub3Ewdm1tMmk1cT…> more options »<https://www.google.com/calendar/event?action=VIEW&eid=NWlub3Ewdm1tMmk1cTJrM…> Invitation from Google Calendar<https://www.google.com/calendar/> You are receiving this courtesy email at the account tf-a(a)lists.trustedfirmware.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively, you can sign up for a Google Account at https://www.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to send a response to the organiser and be added to the guest list, invite others regardless of their own invitation status or to modify your RSVP. Learn more<https://support.google.com/calendar/answer/37135#forwarding>.

3 years, 6 months

1
0
0 0

Trusted Firmware version 2.6 is now available

by Bipin Ravi

Hi all, We are pleased to announce the formal release of Trusted Firmware-A version 2.6, Trusted Firmware-A Tests version 2.6, Hafnium version 2.6 and TF-A OpenCI Scripts 2.6 Releases involving the tagging of multiple sub repositories. These went live on 24th November 2021. Notable Features of the Version 2.6 Release across repositories are as follows: * v8-R64 Upstream support, trusted-boot (BL1) only * RME patches (4 world support) * Hunter & Hayes CPU support * Demeter (Makalu ELP for Infra) CPU support * ARM v9.0-A ETE V1.0 * ARM v9.1-A ETE V1.1 * Armv9 RME support * Generic Firmware Update support * Measured Boot Enhancements * MPMM AMU support SME (Mortlach) for non-secure world (FEAT_SME) * Security hardening LLVM/clang support. * FF-A v1.1 notifications support. * FF-A v1.1 interrupt handling support. * S-EL0 partitions (through VHE in the secure world). * SPM support for saving/restoring the normal world SVE live state. * Build system update to LLVM/Clang 12. * Updates to FF-A Setup and discovery. * FF-A compliance fixes. * Threat model introduced for SPMC at SEL2 * Eight new partner and Arm platforms support added Please refer to the TF-A [1], Hafnium [2] and TF-A Tests [3] changelogs for the complete summary of changes the previous release. The test plan and results [4] for the v2.6 release captures the release test activities. TF-A [5], TF-A Test [6], Hafnium [7] and TF-A OpenCI Scripts [8] repositories are available [1] https://trustedfirmware-a.readthedocs.io/en/v2.6/ [2] https://review.trustedfirmware.org/plugins/gitiles/hafnium/hafnium/+/HEAD/d… [3] https://trustedfirmware-a-tests.readthedocs.io/en/v2.6/ [4] https://confluence.arm.com/display/BSGSoftware/TF-A+v2.6+Test+Plan+and+Resu… [5] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tag/?h=v2.6 [6] https://git.trustedfirmware.org/TF-A/tf-a-tests.git/tag/?h=v2.6 [7] https://git.trustedfirmware.org/hafnium/hafnium.git/tag/?h=v2.6 [8] https://git.trustedfirmware.org/ci/tf-a-ci-scripts.git/tag/?h=v2.6 Thanks & best regards, [cid:image001.jpg@01D7E120.C34F0DA0] Bipin Ravi | Principal Design Engineer Bipin.Ravi(a)arm.com<mailto:Bipin.Ravi@arm.com> | Skype: Bipin.Ravi.ARM Direct: +1-512-225 -1071 | Mobile: +1-214-212-0794 5707 Southwest Parkway, Suite 100, Austin, TX 78735

3 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

TF-A