From: Mukesh Ojha mukesh.ojha@oss.qualcomm.com

All the existing variants Kodiak boards are using Gunyah hypervisor which means that, so far, Linux-based OS could only boot in EL1 on those devices. However, it is possible for us to boot Linux at EL2 on these devices [1].

When running under Gunyah, the remote processor firmware IOMMU streams are controlled by Gunyah. However, without Gunyah, the IOMMU is managed by the consumer of this DeviceTree. Therefore, describe the firmware streams for each remote processor.

Add a EL2-specific DT overlay and apply it to Kodiak IOT variant devices to create -el2.dtb for each of them alongside "normal" dtb.

[1] https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-4/boot-devel...

Signed-off-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com [SG: watchdog fixup] Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- arch/arm64/boot/dts/qcom/Makefile | 2 ++ arch/arm64/boot/dts/qcom/kodiak-el2.dtso | 35 ++++++++++++++++++++++++ 2 files changed, 37 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/kodiak-el2.dtso

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 4ba8e7306419..28123cdc9de2 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -170,6 +170,8 @@ qcs615-ride-el2-dtbs := qcs615-ride.dtb talos-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += qcs615-ride-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-radxa-dragon-q6a.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb +qcs6490-rb3gen2-el2-dtbs := qcs6490-rb3gen2.dtb kodiak-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-el2.dtb

qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-industrial-mezzanine.dtbo diff --git a/arch/arm64/boot/dts/qcom/kodiak-el2.dtso b/arch/arm64/boot/dts/qcom/kodiak-el2.dtso new file mode 100644 index 000000000000..0b3a69a0d765 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/kodiak-el2.dtso @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + * + * Kodiak specific modifications required to boot in EL2. + */ + + +/dts-v1/; +/plugin/; + +&gpu_zap_shader { + status = "disabled"; +}; + +&remoteproc_adsp { + iommus = <&apps_smmu 0x1800 0x0>; +}; + +&remoteproc_cdsp { + iommus = <&apps_smmu 0x11a0 0x0400>; +}; + +&remoteproc_wpss { + iommus = <&apps_smmu 0x1c03 0x1>, + <&apps_smmu 0x1c83 0x1>; +}; + +&venus { + status = "disabled"; +}; + +&watchdog { + status = "okay"; +};

From: Sumit Garg sumit.garg@oss.qualcomm.com

With the availability of generic PAS service, let's add SCM calls as a backend to keep supporting legacy QTEE interfaces. The exported qcom_scm* wrappers will get dropped once all the client drivers get migrated as part of future patches.

Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Reviewed-by: Harshal Dev harshal.dev@oss.qualcomm.com Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/firmware/qcom/Kconfig | 3 +- drivers/firmware/qcom/qcom_scm.c | 335 ++++++++++++++----------------- 2 files changed, 156 insertions(+), 182 deletions(-)

diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig index 9f66cc774508..732a0bff7d9f 100644 --- a/drivers/firmware/qcom/Kconfig +++ b/drivers/firmware/qcom/Kconfig @@ -15,8 +15,9 @@ config QCOM_PAS TEE bus based PAS service implementation.

config QCOM_SCM + tristate "Qualcomm PAS SCM interface driver" + select QCOM_PAS select QCOM_TZMEM - tristate

config QCOM_TZMEM tristate diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 9b06a69d3a6d..d87a962e93da 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -13,6 +13,7 @@ #include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/export.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/firmware/qcom/qcom_scm.h> #include <linux/firmware/qcom/qcom_tzmem.h> #include <linux/init.h> @@ -33,6 +34,7 @@

#include <dt-bindings/interrupt-controller/arm-gic.h>

+#include "qcom_pas.h" #include "qcom_scm.h" #include "qcom_tzmem.h"

@@ -479,25 +481,6 @@ void qcom_scm_cpu_power_down(u32 flags) } EXPORT_SYMBOL_GPL(qcom_scm_cpu_power_down);

-int qcom_scm_set_remote_state(u32 state, u32 id) -{ - struct qcom_scm_desc desc = { - .svc = QCOM_SCM_SVC_BOOT, - .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE, - .arginfo = QCOM_SCM_ARGS(2), - .args[0] = state, - .args[1] = id, - .owner = ARM_SMCCC_OWNER_SIP, - }; - struct qcom_scm_res res; - int ret; - - ret = qcom_scm_call(__scm->dev, &desc, &res); - - return ret ? : res.result[0]; -} -EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state); - static int qcom_scm_disable_sdi(void) { int ret; @@ -570,26 +553,12 @@ static void qcom_scm_set_download_mode(u32 dload_mode) dev_err(__scm->dev, "failed to set download mode: %d\n", ret); }

-/** - * devm_qcom_scm_pas_context_alloc() - Allocate peripheral authentication service - * context for a given peripheral - * - * PAS context is device-resource managed, so the caller does not need - * to worry about freeing the context memory. - * - * @dev: PAS firmware device - * @pas_id: peripheral authentication service id - * @mem_phys: Subsystem reserve memory start address - * @mem_size: Subsystem reserve memory size - * - * Returns: The new PAS context, or ERR_PTR() on failure. - */ struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev, u32 pas_id, phys_addr_t mem_phys, size_t mem_size) { - struct qcom_scm_pas_context *ctx; + struct qcom_pas_context *ctx;

ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) @@ -600,11 +569,12 @@ struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev, ctx->mem_phys = mem_phys; ctx->mem_size = mem_size;

- return ctx; + return (struct qcom_scm_pas_context *)ctx; } EXPORT_SYMBOL_GPL(devm_qcom_scm_pas_context_alloc);

-static int __qcom_scm_pas_init_image(u32 pas_id, dma_addr_t mdata_phys, +static int __qcom_scm_pas_init_image(struct device *dev, u32 pas_id, + dma_addr_t mdata_phys, struct qcom_scm_res *res) { struct qcom_scm_desc desc = { @@ -626,7 +596,7 @@ static int __qcom_scm_pas_init_image(u32 pas_id, dma_addr_t mdata_phys,

desc.args[1] = mdata_phys;

- ret = qcom_scm_call(__scm->dev, &desc, res); + ret = qcom_scm_call(dev, &desc, res); qcom_scm_bw_disable();

disable_clk: @@ -635,7 +605,8 @@ static int __qcom_scm_pas_init_image(u32 pas_id, dma_addr_t mdata_phys, return ret; }

-static int qcom_scm_pas_prep_and_init_image(struct qcom_scm_pas_context *ctx, +static int qcom_scm_pas_prep_and_init_image(struct device *dev, + struct qcom_pas_context *ctx, const void *metadata, size_t size) { struct qcom_scm_res res; @@ -650,7 +621,7 @@ static int qcom_scm_pas_prep_and_init_image(struct qcom_scm_pas_context *ctx, memcpy(mdata_buf, metadata, size); mdata_phys = qcom_tzmem_to_phys(mdata_buf);

- ret = __qcom_scm_pas_init_image(ctx->pas_id, mdata_phys, &res); + ret = __qcom_scm_pas_init_image(dev, ctx->pas_id, mdata_phys, &res); if (ret < 0) qcom_tzmem_free(mdata_buf); else @@ -659,25 +630,9 @@ static int qcom_scm_pas_prep_and_init_image(struct qcom_scm_pas_context *ctx, return ret ? : res.result[0]; }

-/** - * qcom_scm_pas_init_image() - Initialize peripheral authentication service - * state machine for a given peripheral, using the - * metadata - * @pas_id: peripheral authentication service id - * @metadata: pointer to memory containing ELF header, program header table - * and optional blob of data used for authenticating the metadata - * and the rest of the firmware - * @size: size of the metadata - * @ctx: optional pas context - * - * Return: 0 on success. - * - * Upon successful return, the PAS metadata context (@ctx) will be used to - * track the metadata allocation, this needs to be released by invoking - * qcom_scm_pas_metadata_release() by the caller. - */ -int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, - struct qcom_scm_pas_context *ctx) +static int __qcom_scm_pas_init_image2(struct device *dev, u32 pas_id, + const void *metadata, size_t size, + struct qcom_pas_context *ctx) { struct qcom_scm_res res; dma_addr_t mdata_phys; @@ -685,7 +640,7 @@ int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, int ret;

if (ctx && ctx->use_tzmem) - return qcom_scm_pas_prep_and_init_image(ctx, metadata, size); + return qcom_scm_pas_prep_and_init_image(dev, ctx, metadata, size);

/* * During the scm call memory protection will be enabled for the meta @@ -699,16 +654,15 @@ int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, * If we pass a buffer that is already part of an SHM Bridge to this * call, it will fail. */ - mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys, - GFP_KERNEL); + mdata_buf = dma_alloc_coherent(dev, size, &mdata_phys, GFP_KERNEL); if (!mdata_buf) return -ENOMEM;

memcpy(mdata_buf, metadata, size);

- ret = __qcom_scm_pas_init_image(pas_id, mdata_phys, &res); + ret = __qcom_scm_pas_init_image(dev, pas_id, mdata_phys, &res); if (ret < 0 || !ctx) { - dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys); + dma_free_coherent(dev, size, mdata_buf, mdata_phys); } else if (ctx) { ctx->ptr = mdata_buf; ctx->phys = mdata_phys; @@ -717,36 +671,35 @@ int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,

return ret ? : res.result[0]; } -EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image);

-/** - * qcom_scm_pas_metadata_release() - release metadata context - * @ctx: pas context - */ -void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx) +int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, + struct qcom_scm_pas_context *ctx) { - if (!ctx->ptr) - return; + return __qcom_scm_pas_init_image2(__scm->dev, pas_id, metadata, size, + (struct qcom_pas_context *)ctx); +} +EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image);

+static void __qcom_scm_pas_metadata_release(struct device *dev, + struct qcom_pas_context *ctx) +{ if (ctx->use_tzmem) qcom_tzmem_free(ctx->ptr); else - dma_free_coherent(__scm->dev, ctx->size, ctx->ptr, ctx->phys); + dma_free_coherent(dev, ctx->size, ctx->ptr, ctx->phys);

ctx->ptr = NULL; } + +void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx) +{ + __qcom_scm_pas_metadata_release(__scm->dev, + (struct qcom_pas_context *)ctx); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_metadata_release);

-/** - * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral - * for firmware loading - * @pas_id: peripheral authentication service id - * @addr: start address of memory area to prepare - * @size: size of the memory area to prepare - * - * Returns 0 on success. - */ -int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size) +static int __qcom_scm_pas_mem_setup(struct device *dev, u32 pas_id, + phys_addr_t addr, phys_addr_t size) { int ret; struct qcom_scm_desc desc = { @@ -768,7 +721,7 @@ int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size) if (ret) goto disable_clk;

- ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res); qcom_scm_bw_disable();

disable_clk: @@ -776,9 +729,15 @@ int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size)

return ret ? : res.result[0]; } + +int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size) +{ + return __qcom_scm_pas_mem_setup(__scm->dev, pas_id, addr, size); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_mem_setup);

-static void *__qcom_scm_pas_get_rsc_table(u32 pas_id, void *input_rt_tzm, +static void *__qcom_scm_pas_get_rsc_table(struct device *dev, u32 pas_id, + void *input_rt_tzm, size_t input_rt_size, size_t *output_rt_size) { @@ -813,7 +772,7 @@ static void *__qcom_scm_pas_get_rsc_table(u32 pas_id, void *input_rt_tzm, * with output_rt_tzm buffer with res.result[2] size however, It should not * be of unresonable size. */ - ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res); if (!ret && res.result[2] > SZ_1G) { ret = -E2BIG; goto free_output_rt; @@ -830,51 +789,11 @@ static void *__qcom_scm_pas_get_rsc_table(u32 pas_id, void *input_rt_tzm, return ret ? ERR_PTR(ret) : output_rt_tzm; }

-/** - * qcom_scm_pas_get_rsc_table() - Retrieve the resource table in passed output buffer - * for a given peripheral. - * - * Qualcomm remote processor may rely on both static and dynamic resources for - * its functionality. Static resources typically refer to memory-mapped addresses - * required by the subsystem and are often embedded within the firmware binary - * and dynamic resources, such as shared memory in DDR etc., are determined at - * runtime during the boot process. - * - * On Qualcomm Technologies devices, it's possible that static resources are not - * embedded in the firmware binary and instead are provided by TrustZone However, - * dynamic resources are always expected to come from TrustZone. This indicates - * that for Qualcomm devices, all resources (static and dynamic) will be provided - * by TrustZone via the SMC call. - * - * If the remote processor firmware binary does contain static resources, they - * should be passed in input_rt. These will be forwarded to TrustZone for - * authentication. TrustZone will then append the dynamic resources and return - * the complete resource table in output_rt_tzm. - * - * If the remote processor firmware binary does not include a resource table, - * the caller of this function should set input_rt as NULL and input_rt_size - * as zero respectively. - * - * More about documentation on resource table data structures can be found in - * include/linux/remoteproc.h - * - * @ctx: PAS context - * @pas_id: peripheral authentication service id - * @input_rt: resource table buffer which is present in firmware binary - * @input_rt_size: size of the resource table present in firmware binary - * @output_rt_size: TrustZone expects caller should pass worst case size for - * the output_rt_tzm. - * - * Return: - * On success, returns a pointer to the allocated buffer containing the final - * resource table and output_rt_size will have actual resource table size from - * TrustZone. The caller is responsible for freeing the buffer. On failure, - * returns ERR_PTR(-errno). - */ -struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx, - void *input_rt, - size_t input_rt_size, - size_t *output_rt_size) +static void *__qcom_scm_pas_get_rsc_table2(struct device *dev, + struct qcom_pas_context *ctx, + void *input_rt, + size_t input_rt_size, + size_t *output_rt_size) { struct resource_table empty_rsc = {}; size_t size = SZ_16K; @@ -909,11 +828,12 @@ struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *c

memcpy(input_rt_tzm, input_rt, input_rt_size);

- output_rt_tzm = __qcom_scm_pas_get_rsc_table(ctx->pas_id, input_rt_tzm, + output_rt_tzm = __qcom_scm_pas_get_rsc_table(dev, ctx->pas_id, + input_rt_tzm, input_rt_size, &size); if (PTR_ERR(output_rt_tzm) == -EOVERFLOW) /* Try again with the size requested by the TZ */ - output_rt_tzm = __qcom_scm_pas_get_rsc_table(ctx->pas_id, + output_rt_tzm = __qcom_scm_pas_get_rsc_table(dev, ctx->pas_id, input_rt_tzm, input_rt_size, &size); @@ -943,16 +863,20 @@ struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *c

return ret ? ERR_PTR(ret) : tbl_ptr; } + +struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx, + void *input_rt, + size_t input_rt_size, + size_t *output_rt_size) +{ + return __qcom_scm_pas_get_rsc_table2(__scm->dev, + (struct qcom_pas_context *)ctx, + input_rt, input_rt_size, + output_rt_size); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_get_rsc_table);

-/** - * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware - * and reset the remote processor - * @pas_id: peripheral authentication service id - * - * Return 0 on success. - */ -int qcom_scm_pas_auth_and_reset(u32 pas_id) +static int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -972,7 +896,7 @@ int qcom_scm_pas_auth_and_reset(u32 pas_id) if (ret) goto disable_clk;

- ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res); qcom_scm_bw_disable();

disable_clk: @@ -980,28 +904,15 @@ int qcom_scm_pas_auth_and_reset(u32 pas_id)

return ret ? : res.result[0]; } + +int qcom_scm_pas_auth_and_reset(u32 pas_id) +{ + return __qcom_scm_pas_auth_and_reset(__scm->dev, pas_id); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset);

-/** - * qcom_scm_pas_prepare_and_auth_reset() - Prepare, authenticate, and reset the - * remote processor - * - * @ctx: Context saved during call to qcom_scm_pas_context_init() - * - * This function performs the necessary steps to prepare a PAS subsystem, - * authenticate it using the provided metadata, and initiate a reset sequence. - * - * It should be used when Linux is in control setting up the IOMMU hardware - * for remote subsystem during secure firmware loading processes. The preparation - * step sets up a shmbridge over the firmware memory before TrustZone accesses the - * firmware memory region for authentication. The authentication step verifies - * the integrity and authenticity of the firmware or configuration using secure - * metadata. Finally, the reset step ensures the subsystem starts in a clean and - * sane state. - * - * Return: 0 on success, negative errno on failure. - */ -int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) +static int __qcom_scm_pas_prepare_and_auth_reset(struct device *dev, + struct qcom_pas_context *ctx) { u64 handle; int ret; @@ -1012,7 +923,7 @@ int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) * memory region and then invokes a call to TrustZone to authenticate. */ if (!ctx->use_tzmem) - return qcom_scm_pas_auth_and_reset(ctx->pas_id); + return __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id);

/* * When Linux runs @ EL2 Linux must create the shmbridge itself and then @@ -1022,20 +933,45 @@ int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) if (ret) return ret;

- ret = qcom_scm_pas_auth_and_reset(ctx->pas_id); + ret = __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id); qcom_tzmem_shm_bridge_delete(handle);

return ret; } + +int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) +{ + return __qcom_scm_pas_prepare_and_auth_reset(__scm->dev, + (struct qcom_pas_context *)ctx); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_prepare_and_auth_reset);

-/** - * qcom_scm_pas_shutdown() - Shut down the remote processor - * @pas_id: peripheral authentication service id - * - * Returns 0 on success. - */ -int qcom_scm_pas_shutdown(u32 pas_id) +static int __qcom_scm_pas_set_remote_state(struct device *dev, u32 state, + u32 pas_id) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_BOOT, + .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE, + .arginfo = QCOM_SCM_ARGS(2), + .args[0] = state, + .args[1] = pas_id, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + int ret; + + ret = qcom_scm_call(dev, &desc, &res); + + return ret ? : res.result[0]; +} + +int qcom_scm_set_remote_state(u32 state, u32 id) +{ + return __qcom_scm_pas_set_remote_state(__scm->dev, state, id); +} +EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state); + +static int __qcom_scm_pas_shutdown(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -1055,7 +991,7 @@ int qcom_scm_pas_shutdown(u32 pas_id) if (ret) goto disable_clk;

- ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res); qcom_scm_bw_disable();

disable_clk: @@ -1063,16 +999,14 @@ int qcom_scm_pas_shutdown(u32 pas_id)

return ret ? : res.result[0]; } + +int qcom_scm_pas_shutdown(u32 pas_id) +{ + return __qcom_scm_pas_shutdown(__scm->dev, pas_id); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_shutdown);

-/** - * qcom_scm_pas_supported() - Check if the peripheral authentication service is - * available for the given peripherial - * @pas_id: peripheral authentication service id - * - * Returns true if PAS is supported for this peripheral, otherwise false. - */ -bool qcom_scm_pas_supported(u32 pas_id) +static bool __qcom_scm_pas_supported(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -1084,16 +1018,49 @@ bool qcom_scm_pas_supported(u32 pas_id) }; struct qcom_scm_res res;

- if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL, + if (!__qcom_scm_is_call_available(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_IS_SUPPORTED)) return false;

- ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res);

return ret ? false : !!res.result[0]; } + +bool qcom_scm_pas_supported(u32 pas_id) +{ + return __qcom_scm_pas_supported(__scm->dev, pas_id); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_supported);

+static struct qcom_pas_ops qcom_pas_ops_scm = { + .drv_name = "qcom_scm", + .supported = __qcom_scm_pas_supported, + .init_image = __qcom_scm_pas_init_image2, + .mem_setup = __qcom_scm_pas_mem_setup, + .get_rsc_table = __qcom_scm_pas_get_rsc_table2, + .auth_and_reset = __qcom_scm_pas_auth_and_reset, + .prepare_and_auth_reset = __qcom_scm_pas_prepare_and_auth_reset, + .set_remote_state = __qcom_scm_pas_set_remote_state, + .shutdown = __qcom_scm_pas_shutdown, + .metadata_release = __qcom_scm_pas_metadata_release, +}; + +/** + * qcom_scm_is_pas_available() - Check if the peripheral authentication service + * is available via SCM or not + * + * Returns true if PAS is available, otherwise false. + */ +static bool qcom_scm_is_pas_available(void) +{ + if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PIL_PAS_AUTH_AND_RESET)) + return false; + + return true; +} + static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset) { struct qcom_scm_desc desc = { @@ -2836,6 +2803,11 @@ static int qcom_scm_probe(struct platform_device *pdev)

__get_convention();

+ if (qcom_scm_is_pas_available()) { + qcom_pas_ops_scm.dev = scm->dev; + qcom_pas_ops_register(&qcom_pas_ops_scm); + } + /* * If "download mode" is requested, from this point on warmboot * will cause the boot stages to enter download mode, unless @@ -2875,6 +2847,7 @@ static void qcom_scm_shutdown(struct platform_device *pdev) { /* Clean shutdown, disable download mode to allow normal restart */ qcom_scm_set_download_mode(QCOM_DLOAD_NODUMP); + qcom_pas_ops_unregister(); }

static const struct of_device_id qcom_scm_dt_match[] = {

From: Sumit Garg sumit.garg@oss.qualcomm.com

Switch qcom_q6v5_pas client driver over to generic PAS TZ APIs. Generic PAS TZ service allows to support multiple TZ implementation backends like QTEE based SCM PAS service, OP-TEE based PAS service and any further future TZ backend service.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/remoteproc/qcom_q6v5_pas.c | 51 +++++++++++++++--------------- 1 file changed, 26 insertions(+), 25 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c index da27d1d3c9da..847249c28c1b 100644 --- a/drivers/remoteproc/qcom_q6v5_pas.c +++ b/drivers/remoteproc/qcom_q6v5_pas.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/pm_domain.h> #include <linux/pm_runtime.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/firmware/qcom/qcom_scm.h> #include <linux/regulator/consumer.h> #include <linux/remoteproc.h> @@ -118,8 +119,8 @@ struct qcom_pas { struct qcom_rproc_ssr ssr_subdev; struct qcom_sysmon *sysmon;

- struct qcom_scm_pas_context *pas_ctx; - struct qcom_scm_pas_context *dtb_pas_ctx; + struct qcom_pas_context *pas_ctx; + struct qcom_pas_context *dtb_pas_ctx; };

static void qcom_pas_segment_dump(struct rproc *rproc, @@ -196,7 +197,7 @@ static int qcom_pas_shutdown_poll_decrypt(struct qcom_pas *pas)

do { msleep(QCOM_PAS_DECRYPT_SHUTDOWN_DELAY_MS); - ret = qcom_scm_pas_shutdown(pas->pas_id); + ret = qcom_pas_shutdown(pas->pas_id); } while (ret == -EINVAL && --retry_num);

return ret; @@ -212,9 +213,9 @@ static int qcom_pas_unprepare(struct rproc *rproc) * auth_and_reset() was successful, but in other cases clean it up * here. */ - qcom_scm_pas_metadata_release(pas->pas_ctx); + qcom_pas_metadata_release(pas->pas_ctx); if (pas->dtb_pas_id) - qcom_scm_pas_metadata_release(pas->dtb_pas_ctx); + qcom_pas_metadata_release(pas->dtb_pas_ctx);

return 0; } @@ -228,9 +229,9 @@ static int qcom_pas_load(struct rproc *rproc, const struct firmware *fw) pas->firmware = fw;

if (pas->lite_pas_id) - qcom_scm_pas_shutdown(pas->lite_pas_id); + qcom_pas_shutdown(pas->lite_pas_id); if (pas->lite_dtb_pas_id) - qcom_scm_pas_shutdown(pas->lite_dtb_pas_id); + qcom_pas_shutdown(pas->lite_dtb_pas_id);

if (pas->dtb_pas_id) { ret = request_firmware(&pas->dtb_firmware, pas->dtb_firmware_name, pas->dev); @@ -250,7 +251,7 @@ static int qcom_pas_load(struct rproc *rproc, const struct firmware *fw) return 0;

release_dtb_metadata: - qcom_scm_pas_metadata_release(pas->dtb_pas_ctx); + qcom_pas_metadata_release(pas->dtb_pas_ctx); release_firmware(pas->dtb_firmware);

return ret; @@ -310,7 +311,7 @@ static int qcom_pas_start(struct rproc *rproc) if (ret) goto disable_px_supply;

- ret = qcom_scm_pas_prepare_and_auth_reset(pas->dtb_pas_ctx); + ret = qcom_pas_prepare_and_auth_reset(pas->dtb_pas_ctx); if (ret) { dev_err(pas->dev, "failed to authenticate dtb image and release reset\n"); @@ -329,7 +330,7 @@ static int qcom_pas_start(struct rproc *rproc) if (ret) goto release_pas_metadata;

- ret = qcom_scm_pas_prepare_and_auth_reset(pas->pas_ctx); + ret = qcom_pas_prepare_and_auth_reset(pas->pas_ctx); if (ret) { dev_err(pas->dev, "failed to authenticate image and release reset\n"); @@ -339,13 +340,13 @@ static int qcom_pas_start(struct rproc *rproc) ret = qcom_q6v5_wait_for_start(&pas->q6v5, msecs_to_jiffies(5000)); if (ret == -ETIMEDOUT) { dev_err(pas->dev, "start timed out\n"); - qcom_scm_pas_shutdown(pas->pas_id); + qcom_pas_shutdown(pas->pas_id); goto unmap_carveout; }

- qcom_scm_pas_metadata_release(pas->pas_ctx); + qcom_pas_metadata_release(pas->pas_ctx); if (pas->dtb_pas_id) - qcom_scm_pas_metadata_release(pas->dtb_pas_ctx); + qcom_pas_metadata_release(pas->dtb_pas_ctx);

/* firmware is used to pass reference from qcom_pas_start(), drop it now */ pas->firmware = NULL; @@ -355,9 +356,9 @@ static int qcom_pas_start(struct rproc *rproc) unmap_carveout: qcom_pas_unmap_carveout(rproc, pas->mem_phys, pas->mem_size); release_pas_metadata: - qcom_scm_pas_metadata_release(pas->pas_ctx); + qcom_pas_metadata_release(pas->pas_ctx); if (pas->dtb_pas_id) - qcom_scm_pas_metadata_release(pas->dtb_pas_ctx); + qcom_pas_metadata_release(pas->dtb_pas_ctx);

unmap_dtb_carveout: if (pas->dtb_pas_id) @@ -406,7 +407,7 @@ static int qcom_pas_stop(struct rproc *rproc) if (ret == -ETIMEDOUT) dev_err(pas->dev, "timed out on wait\n");

- ret = qcom_scm_pas_shutdown(pas->pas_id); + ret = qcom_pas_shutdown(pas->pas_id); if (ret && pas->decrypt_shutdown) ret = qcom_pas_shutdown_poll_decrypt(pas);

@@ -414,7 +415,7 @@ static int qcom_pas_stop(struct rproc *rproc) dev_err(pas->dev, "failed to shutdown: %d\n", ret);

if (pas->dtb_pas_id) { - ret = qcom_scm_pas_shutdown(pas->dtb_pas_id); + ret = qcom_pas_shutdown(pas->dtb_pas_id); if (ret) dev_err(pas->dev, "failed to shutdown dtb: %d\n", ret);

@@ -484,11 +485,11 @@ static int qcom_pas_parse_firmware(struct rproc *rproc, const struct firmware *f * * Here, we call rproc_elf_load_rsc_table() to check firmware binary has resources * or not and if it is not having then we pass NULL and zero as input resource - * table pointer and size respectively to the argument of qcom_scm_pas_get_rsc_table() + * table pointer and size respectively to the argument of qcom_pas_get_rsc_table() * and this is even true for Qualcomm remote processor who does follow remoteproc * framework. */ - output_rt = qcom_scm_pas_get_rsc_table(pas->pas_ctx, table, table_sz, &output_rt_size); + output_rt = qcom_pas_get_rsc_table(pas->pas_ctx, table, table_sz, &output_rt_size); ret = IS_ERR(output_rt) ? PTR_ERR(output_rt) : 0; if (ret) { dev_err(pas->dev, "Error in getting resource table: %d\n", ret); @@ -746,7 +747,7 @@ static int qcom_pas_probe(struct platform_device *pdev) if (!desc) return -EINVAL;

- if (!qcom_scm_is_available()) + if (!qcom_pas_is_available()) return -EPROBE_DEFER;

fw_name = desc->firmware_name; @@ -838,16 +839,16 @@ static int qcom_pas_probe(struct platform_device *pdev)

qcom_add_ssr_subdev(rproc, &pas->ssr_subdev, desc->ssr_name);

- pas->pas_ctx = devm_qcom_scm_pas_context_alloc(pas->dev, pas->pas_id, - pas->mem_phys, pas->mem_size); + pas->pas_ctx = devm_qcom_pas_context_alloc(pas->dev, pas->pas_id, + pas->mem_phys, pas->mem_size); if (IS_ERR(pas->pas_ctx)) { ret = PTR_ERR(pas->pas_ctx); goto remove_ssr_sysmon; }

- pas->dtb_pas_ctx = devm_qcom_scm_pas_context_alloc(pas->dev, pas->dtb_pas_id, - pas->dtb_mem_phys, - pas->dtb_mem_size); + pas->dtb_pas_ctx = devm_qcom_pas_context_alloc(pas->dev, pas->dtb_pas_id, + pas->dtb_mem_phys, + pas->dtb_mem_size); if (IS_ERR(pas->dtb_pas_ctx)) { ret = PTR_ERR(pas->dtb_pas_ctx); goto remove_ssr_sysmon;

From: Sumit Garg sumit.garg@oss.qualcomm.com

Switch mdtloader client driver over to generic PAS TZ APIs. Generic PAS TZ service allows to support multiple TZ implementation backends like QTEE based SCM PAS service, OP-TEE based PAS service and any further future TZ backend service.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/soc/qcom/mdt_loader.c | 12 ++++++------ include/linux/soc/qcom/mdt_loader.h | 6 +++--- 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c index c004d444d698..137992456b71 100644 --- a/drivers/soc/qcom/mdt_loader.c +++ b/drivers/soc/qcom/mdt_loader.c @@ -13,7 +13,7 @@ #include <linux/firmware.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/firmware/qcom/qcom_scm.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/sizes.h> #include <linux/slab.h> #include <linux/soc/qcom/mdt_loader.h> @@ -229,7 +229,7 @@ EXPORT_SYMBOL_GPL(qcom_mdt_read_metadata);

static int __qcom_mdt_pas_init(struct device *dev, const struct firmware *fw, const char *fw_name, int pas_id, phys_addr_t mem_phys, - struct qcom_scm_pas_context *ctx) + struct qcom_pas_context *ctx) { const struct elf32_phdr *phdrs; const struct elf32_phdr *phdr; @@ -271,7 +271,7 @@ static int __qcom_mdt_pas_init(struct device *dev, const struct firmware *fw, goto out; }

- ret = qcom_scm_pas_init_image(pas_id, metadata, metadata_len, ctx); + ret = qcom_pas_init_image(pas_id, metadata, metadata_len, ctx); kfree(metadata); if (ret) { /* Invalid firmware metadata */ @@ -280,7 +280,7 @@ static int __qcom_mdt_pas_init(struct device *dev, const struct firmware *fw, }

if (relocate) { - ret = qcom_scm_pas_mem_setup(pas_id, mem_phys, max_addr - min_addr); + ret = qcom_pas_mem_setup(pas_id, mem_phys, max_addr - min_addr); if (ret) { /* Unable to set up relocation */ dev_err(dev, "error %d setting up firmware %s\n", ret, fw_name); @@ -472,7 +472,7 @@ EXPORT_SYMBOL_GPL(qcom_mdt_load); * firmware segments (e.g., .bXX files). Authentication of the segments done * by a separate call. * - * The PAS context must be initialized using qcom_scm_pas_context_init() + * The PAS context must be initialized using devm_qcom_pas_context_alloc() * prior to invoking this function. * * @ctx: Pointer to the PAS (Peripheral Authentication Service) context @@ -483,7 +483,7 @@ EXPORT_SYMBOL_GPL(qcom_mdt_load); * * Return: 0 on success or a negative error code on failure. */ -int qcom_mdt_pas_load(struct qcom_scm_pas_context *ctx, const struct firmware *fw, +int qcom_mdt_pas_load(struct qcom_pas_context *ctx, const struct firmware *fw, const char *firmware, void *mem_region, phys_addr_t *reloc_base) { int ret; diff --git a/include/linux/soc/qcom/mdt_loader.h b/include/linux/soc/qcom/mdt_loader.h index 82372e0db0a1..142409555425 100644 --- a/include/linux/soc/qcom/mdt_loader.h +++ b/include/linux/soc/qcom/mdt_loader.h @@ -10,7 +10,7 @@

struct device; struct firmware; -struct qcom_scm_pas_context; +struct qcom_pas_context;

#if IS_ENABLED(CONFIG_QCOM_MDT_LOADER)

@@ -20,7 +20,7 @@ int qcom_mdt_load(struct device *dev, const struct firmware *fw, phys_addr_t mem_phys, size_t mem_size, phys_addr_t *reloc_base);

-int qcom_mdt_pas_load(struct qcom_scm_pas_context *ctx, const struct firmware *fw, +int qcom_mdt_pas_load(struct qcom_pas_context *ctx, const struct firmware *fw, const char *firmware, void *mem_region, phys_addr_t *reloc_base);

int qcom_mdt_load_no_init(struct device *dev, const struct firmware *fw, @@ -45,7 +45,7 @@ static inline int qcom_mdt_load(struct device *dev, const struct firmware *fw, return -ENODEV; }

-static inline int qcom_mdt_pas_load(struct qcom_scm_pas_context *ctx, +static inline int qcom_mdt_pas_load(struct qcom_pas_context *ctx, const struct firmware *fw, const char *firmware, void *mem_region, phys_addr_t *reloc_base) {

From: Sumit Garg sumit.garg@oss.qualcomm.com

Select PAS generic service driver to enable support for multiple PAS backends like OP-TEE in addition to SCM.

Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/remoteproc/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index ee54436fea5a..9a6ca30e1481 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -210,6 +210,7 @@ config QCOM_Q6V5_MSS select QCOM_Q6V5_COMMON select QCOM_RPROC_COMMON select QCOM_SCM + select QCOM_PAS help Say y here to support the Qualcomm self-authenticating modem subsystem based on Hexagon V5. The TrustZone based system is @@ -230,6 +231,7 @@ config QCOM_Q6V5_PAS select QCOM_Q6V5_COMMON select QCOM_RPROC_COMMON select QCOM_SCM + select QCOM_PAS help Say y here to support the TrustZone based Peripheral Image Loader for the Qualcomm remote processors. This is commonly used to control @@ -282,7 +284,7 @@ config QCOM_WCNSS_PIL select QCOM_MDT_LOADER select QCOM_PIL_INFO select QCOM_RPROC_COMMON - select QCOM_SCM + select QCOM_PAS help Say y here to support the Peripheral Image Loader for loading WCNSS firmware and boot the core on e.g. MSM8974, MSM8916. The firmware is

From: Sumit Garg sumit.garg@oss.qualcomm.com

Switch qcom media client drivers over to generic PAS TZ APIs. Generic PAS TZ service allows to support multiple TZ implementation backends like QTEE based SCM PAS service, OP-TEE based PAS service and any further future TZ backend service.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/media/platform/qcom/iris/Kconfig | 25 ++++++++++--------- .../media/platform/qcom/iris/iris_firmware.c | 9 ++++--- drivers/media/platform/qcom/venus/Kconfig | 1 + drivers/media/platform/qcom/venus/firmware.c | 11 ++++---- 4 files changed, 25 insertions(+), 21 deletions(-)

diff --git a/drivers/media/platform/qcom/iris/Kconfig b/drivers/media/platform/qcom/iris/Kconfig index 5498f48362d1..a3873bb6710b 100644 --- a/drivers/media/platform/qcom/iris/Kconfig +++ b/drivers/media/platform/qcom/iris/Kconfig @@ -1,13 +1,14 @@ config VIDEO_QCOM_IRIS - tristate "Qualcomm iris V4L2 decoder driver" - depends on VIDEO_DEV - depends on ARCH_QCOM || COMPILE_TEST - select V4L2_MEM2MEM_DEV - select QCOM_MDT_LOADER - select QCOM_SCM - select VIDEOBUF2_DMA_CONTIG - help - This is a V4L2 driver for Qualcomm iris video accelerator - hardware. It accelerates decoding operations on various - Qualcomm SoCs. - To compile this driver as a module choose m here. + tristate "Qualcomm iris V4L2 decoder driver" + depends on VIDEO_DEV + depends on ARCH_QCOM || COMPILE_TEST + select V4L2_MEM2MEM_DEV + select QCOM_MDT_LOADER + select QCOM_SCM + select QCOM_PAS + select VIDEOBUF2_DMA_CONTIG + help + This is a V4L2 driver for Qualcomm iris video accelerator + hardware. It accelerates decoding operations on various + Qualcomm SoCs. + To compile this driver as a module choose m here. diff --git a/drivers/media/platform/qcom/iris/iris_firmware.c b/drivers/media/platform/qcom/iris/iris_firmware.c index 5f408024e967..b3c5281aea91 100644 --- a/drivers/media/platform/qcom/iris/iris_firmware.c +++ b/drivers/media/platform/qcom/iris/iris_firmware.c @@ -4,6 +4,7 @@ */

#include <linux/firmware.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/firmware/qcom/qcom_scm.h> #include <linux/of_address.h> #include <linux/of_reserved_mem.h> @@ -79,7 +80,7 @@ int iris_fw_load(struct iris_core *core) return -ENOMEM; }

- ret = qcom_scm_pas_auth_and_reset(core->iris_platform_data->pas_id); + ret = qcom_pas_auth_and_reset(core->iris_platform_data->pas_id); if (ret) { dev_err(core->dev, "auth and reset failed: %d\n", ret); return ret; @@ -93,7 +94,7 @@ int iris_fw_load(struct iris_core *core) cp_config->cp_nonpixel_size); if (ret) { dev_err(core->dev, "qcom_scm_mem_protect_video_var failed: %d\n", ret); - qcom_scm_pas_shutdown(core->iris_platform_data->pas_id); + qcom_pas_shutdown(core->iris_platform_data->pas_id); return ret; } } @@ -103,10 +104,10 @@ int iris_fw_load(struct iris_core *core)

int iris_fw_unload(struct iris_core *core) { - return qcom_scm_pas_shutdown(core->iris_platform_data->pas_id); + return qcom_pas_shutdown(core->iris_platform_data->pas_id); }

int iris_set_hw_state(struct iris_core *core, bool resume) { - return qcom_scm_set_remote_state(resume, 0); + return qcom_pas_set_remote_state(resume, 0); } diff --git a/drivers/media/platform/qcom/venus/Kconfig b/drivers/media/platform/qcom/venus/Kconfig index 63ee8c78dc6d..7997b8aa427a 100644 --- a/drivers/media/platform/qcom/venus/Kconfig +++ b/drivers/media/platform/qcom/venus/Kconfig @@ -6,6 +6,7 @@ config VIDEO_QCOM_VENUS select OF_DYNAMIC if ARCH_QCOM select QCOM_MDT_LOADER select QCOM_SCM + select QCOM_PAS select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c index 1de7436713ed..3a38ff985822 100644 --- a/drivers/media/platform/qcom/venus/firmware.c +++ b/drivers/media/platform/qcom/venus/firmware.c @@ -12,6 +12,7 @@ #include <linux/of_reserved_mem.h> #include <linux/platform_device.h> #include <linux/of_device.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/firmware/qcom/qcom_scm.h> #include <linux/sizes.h> #include <linux/soc/qcom/mdt_loader.h> @@ -58,7 +59,7 @@ int venus_set_hw_state(struct venus_core *core, bool resume) int ret;

if (core->use_tz) { - ret = qcom_scm_set_remote_state(resume, 0); + ret = qcom_pas_set_remote_state(resume, 0); if (resume && ret == -EINVAL) ret = 0; return ret; @@ -218,7 +219,7 @@ int venus_boot(struct venus_core *core) int ret;

if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || - (core->use_tz && !qcom_scm_is_available())) + (core->use_tz && !qcom_pas_is_available())) return -EPROBE_DEFER;

ret = of_property_read_string_index(dev->of_node, "firmware-name", 0, @@ -236,7 +237,7 @@ int venus_boot(struct venus_core *core) core->fw.mem_phys = mem_phys;

if (core->use_tz) - ret = qcom_scm_pas_auth_and_reset(VENUS_PAS_ID); + ret = qcom_pas_auth_and_reset(VENUS_PAS_ID); else ret = venus_boot_no_tz(core, mem_phys, mem_size);

@@ -259,7 +260,7 @@ int venus_boot(struct venus_core *core) res->cp_nonpixel_start, res->cp_nonpixel_size); if (ret) { - qcom_scm_pas_shutdown(VENUS_PAS_ID); + qcom_pas_shutdown(VENUS_PAS_ID); dev_err(dev, "set virtual address ranges fail (%d)\n", ret); return ret; @@ -274,7 +275,7 @@ int venus_shutdown(struct venus_core *core) int ret;

if (core->use_tz) - ret = qcom_scm_pas_shutdown(VENUS_PAS_ID); + ret = qcom_pas_shutdown(VENUS_PAS_ID); else ret = venus_shutdown_no_tz(core);

From: Sumit Garg sumit.garg@oss.qualcomm.com

As per testing the SCM backend just ignores it while OP-TEE makes use of it to for proper book keeping purpose.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/media/platform/qcom/iris/iris_firmware.c | 2 +- drivers/media/platform/qcom/venus/firmware.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/qcom/iris/iris_firmware.c b/drivers/media/platform/qcom/iris/iris_firmware.c index b3c5281aea91..856fa6a79064 100644 --- a/drivers/media/platform/qcom/iris/iris_firmware.c +++ b/drivers/media/platform/qcom/iris/iris_firmware.c @@ -109,5 +109,5 @@ int iris_fw_unload(struct iris_core *core)

int iris_set_hw_state(struct iris_core *core, bool resume) { - return qcom_pas_set_remote_state(resume, 0); + return qcom_pas_set_remote_state(resume, core->iris_platform_data->pas_id); } diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c index 3a38ff985822..3c0727ea137d 100644 --- a/drivers/media/platform/qcom/venus/firmware.c +++ b/drivers/media/platform/qcom/venus/firmware.c @@ -59,7 +59,7 @@ int venus_set_hw_state(struct venus_core *core, bool resume) int ret;

if (core->use_tz) { - ret = qcom_pas_set_remote_state(resume, 0); + ret = qcom_pas_set_remote_state(resume, VENUS_PAS_ID); if (resume && ret == -EINVAL) ret = 0; return ret;

From: Sumit Garg sumit.garg@oss.qualcomm.com

Switch ipa client driver over to generic PAS TZ APIs. Generic PAS TZ service allows to support multiple TZ implementation backends like QTEE based SCM PAS service, OP-TEE based PAS service and any further future TZ backend service.

Reviewed-by: Alex Elder elder@riscstar.com Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/net/ipa/Kconfig | 2 +- drivers/net/ipa/ipa_main.c | 13 ++++++++----- 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ipa/Kconfig b/drivers/net/ipa/Kconfig index 01d219d3760c..a9aff1b7977d 100644 --- a/drivers/net/ipa/Kconfig +++ b/drivers/net/ipa/Kconfig @@ -6,7 +6,7 @@ config QCOM_IPA depends on QCOM_RPROC_COMMON || (QCOM_RPROC_COMMON=n && COMPILE_TEST) depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n select QCOM_MDT_LOADER - select QCOM_SCM + select QCOM_PAS select QCOM_QMI_HELPERS help Choose Y or M here to include support for the Qualcomm diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c index 788dd99af2a4..3cd9e44680e9 100644 --- a/drivers/net/ipa/ipa_main.c +++ b/drivers/net/ipa/ipa_main.c @@ -14,7 +14,7 @@ #include <linux/pm_runtime.h> #include <linux/types.h>

-#include <linux/firmware/qcom/qcom_scm.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/soc/qcom/mdt_loader.h>

#include "ipa.h" @@ -624,10 +624,13 @@ static int ipa_firmware_load(struct device *dev) }

ret = qcom_mdt_load(dev, fw, path, IPA_PAS_ID, virt, phys, size, NULL); - if (ret) + if (ret) { dev_err(dev, "error %d loading "%s"\n", ret, path); - else if ((ret = qcom_scm_pas_auth_and_reset(IPA_PAS_ID))) - dev_err(dev, "error %d authenticating "%s"\n", ret, path); + } else { + ret = qcom_pas_auth_and_reset(IPA_PAS_ID); + if (ret) + dev_err(dev, "error %d authenticating "%s"\n", ret, path); + }

memunmap(virt); out_release_firmware: @@ -758,7 +761,7 @@ static enum ipa_firmware_loader ipa_firmware_loader(struct device *dev) return IPA_LOADER_INVALID; out_self: /* We need Trust Zone to load firmware; make sure it's available */ - if (qcom_scm_is_available()) + if (qcom_pas_is_available()) return IPA_LOADER_SELF;

return IPA_LOADER_DEFER;

From: Sumit Garg sumit.garg@oss.qualcomm.com

Now since all the Qcom SCM client drivers have been migrated over to generic PAS TZ service, let's drop the exported SCM PAS wrappers.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/firmware/qcom/qcom_scm.c | 143 +++++-------------------- include/linux/firmware/qcom/qcom_scm.h | 29 ----- 2 files changed, 29 insertions(+), 143 deletions(-)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index d87a962e93da..2493b200696b 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -553,26 +553,6 @@ static void qcom_scm_set_download_mode(u32 dload_mode) dev_err(__scm->dev, "failed to set download mode: %d\n", ret); }

-struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev, - u32 pas_id, - phys_addr_t mem_phys, - size_t mem_size) -{ - struct qcom_pas_context *ctx; - - ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); - if (!ctx) - return ERR_PTR(-ENOMEM); - - ctx->dev = dev; - ctx->pas_id = pas_id; - ctx->mem_phys = mem_phys; - ctx->mem_size = mem_size; - - return (struct qcom_scm_pas_context *)ctx; -} -EXPORT_SYMBOL_GPL(devm_qcom_scm_pas_context_alloc); - static int __qcom_scm_pas_init_image(struct device *dev, u32 pas_id, dma_addr_t mdata_phys, struct qcom_scm_res *res) @@ -630,9 +610,9 @@ static int qcom_scm_pas_prep_and_init_image(struct device *dev, return ret ? : res.result[0]; }

-static int __qcom_scm_pas_init_image2(struct device *dev, u32 pas_id, - const void *metadata, size_t size, - struct qcom_pas_context *ctx) +static int qcom_scm_pas_init_image(struct device *dev, u32 pas_id, + const void *metadata, size_t size, + struct qcom_pas_context *ctx) { struct qcom_scm_res res; dma_addr_t mdata_phys; @@ -672,16 +652,8 @@ static int __qcom_scm_pas_init_image2(struct device *dev, u32 pas_id, return ret ? : res.result[0]; }

-int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, - struct qcom_scm_pas_context *ctx) -{ - return __qcom_scm_pas_init_image2(__scm->dev, pas_id, metadata, size, - (struct qcom_pas_context *)ctx); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image); - -static void __qcom_scm_pas_metadata_release(struct device *dev, - struct qcom_pas_context *ctx) +static void qcom_scm_pas_metadata_release(struct device *dev, + struct qcom_pas_context *ctx) { if (ctx->use_tzmem) qcom_tzmem_free(ctx->ptr); @@ -691,15 +663,8 @@ static void __qcom_scm_pas_metadata_release(struct device *dev, ctx->ptr = NULL; }

-void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx) -{ - __qcom_scm_pas_metadata_release(__scm->dev, - (struct qcom_pas_context *)ctx); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_metadata_release); - -static int __qcom_scm_pas_mem_setup(struct device *dev, u32 pas_id, - phys_addr_t addr, phys_addr_t size) +static int qcom_scm_pas_mem_setup(struct device *dev, u32 pas_id, + phys_addr_t addr, phys_addr_t size) { int ret; struct qcom_scm_desc desc = { @@ -730,12 +695,6 @@ static int __qcom_scm_pas_mem_setup(struct device *dev, u32 pas_id, return ret ? : res.result[0]; }

-int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size) -{ - return __qcom_scm_pas_mem_setup(__scm->dev, pas_id, addr, size); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_mem_setup); - static void *__qcom_scm_pas_get_rsc_table(struct device *dev, u32 pas_id, void *input_rt_tzm, size_t input_rt_size, @@ -789,11 +748,10 @@ static void *__qcom_scm_pas_get_rsc_table(struct device *dev, u32 pas_id, return ret ? ERR_PTR(ret) : output_rt_tzm; }

-static void *__qcom_scm_pas_get_rsc_table2(struct device *dev, - struct qcom_pas_context *ctx, - void *input_rt, - size_t input_rt_size, - size_t *output_rt_size) +static void *qcom_scm_pas_get_rsc_table(struct device *dev, + struct qcom_pas_context *ctx, + void *input_rt, size_t input_rt_size, + size_t *output_rt_size) { struct resource_table empty_rsc = {}; size_t size = SZ_16K; @@ -864,19 +822,7 @@ static void *__qcom_scm_pas_get_rsc_table2(struct device *dev, return ret ? ERR_PTR(ret) : tbl_ptr; }

-struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx, - void *input_rt, - size_t input_rt_size, - size_t *output_rt_size) -{ - return __qcom_scm_pas_get_rsc_table2(__scm->dev, - (struct qcom_pas_context *)ctx, - input_rt, input_rt_size, - output_rt_size); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_get_rsc_table); - -static int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 pas_id) +static int qcom_scm_pas_auth_and_reset(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -905,14 +851,8 @@ static int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 pas_id) return ret ? : res.result[0]; }

-int qcom_scm_pas_auth_and_reset(u32 pas_id) -{ - return __qcom_scm_pas_auth_and_reset(__scm->dev, pas_id); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset); - -static int __qcom_scm_pas_prepare_and_auth_reset(struct device *dev, - struct qcom_pas_context *ctx) +static int qcom_scm_pas_prepare_and_auth_reset(struct device *dev, + struct qcom_pas_context *ctx) { u64 handle; int ret; @@ -923,7 +863,7 @@ static int __qcom_scm_pas_prepare_and_auth_reset(struct device *dev, * memory region and then invokes a call to TrustZone to authenticate. */ if (!ctx->use_tzmem) - return __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id); + return qcom_scm_pas_auth_and_reset(dev, ctx->pas_id);

/* * When Linux runs @ EL2 Linux must create the shmbridge itself and then @@ -933,21 +873,14 @@ static int __qcom_scm_pas_prepare_and_auth_reset(struct device *dev, if (ret) return ret;

- ret = __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id); + ret = qcom_scm_pas_auth_and_reset(dev, ctx->pas_id); qcom_tzmem_shm_bridge_delete(handle);

return ret; }

-int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) -{ - return __qcom_scm_pas_prepare_and_auth_reset(__scm->dev, - (struct qcom_pas_context *)ctx); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_prepare_and_auth_reset); - -static int __qcom_scm_pas_set_remote_state(struct device *dev, u32 state, - u32 pas_id) +static int qcom_scm_pas_set_remote_state(struct device *dev, u32 state, + u32 pas_id) { struct qcom_scm_desc desc = { .svc = QCOM_SCM_SVC_BOOT, @@ -965,13 +898,7 @@ static int __qcom_scm_pas_set_remote_state(struct device *dev, u32 state, return ret ? : res.result[0]; }

-int qcom_scm_set_remote_state(u32 state, u32 id) -{ - return __qcom_scm_pas_set_remote_state(__scm->dev, state, id); -} -EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state); - -static int __qcom_scm_pas_shutdown(struct device *dev, u32 pas_id) +static int qcom_scm_pas_shutdown(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -1000,13 +927,7 @@ static int __qcom_scm_pas_shutdown(struct device *dev, u32 pas_id) return ret ? : res.result[0]; }

-int qcom_scm_pas_shutdown(u32 pas_id) -{ - return __qcom_scm_pas_shutdown(__scm->dev, pas_id); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_shutdown); - -static bool __qcom_scm_pas_supported(struct device *dev, u32 pas_id) +static bool qcom_scm_pas_supported(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -1027,23 +948,17 @@ static bool __qcom_scm_pas_supported(struct device *dev, u32 pas_id) return ret ? false : !!res.result[0]; }

-bool qcom_scm_pas_supported(u32 pas_id) -{ - return __qcom_scm_pas_supported(__scm->dev, pas_id); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_supported); - static struct qcom_pas_ops qcom_pas_ops_scm = { .drv_name = "qcom_scm", - .supported = __qcom_scm_pas_supported, - .init_image = __qcom_scm_pas_init_image2, - .mem_setup = __qcom_scm_pas_mem_setup, - .get_rsc_table = __qcom_scm_pas_get_rsc_table2, - .auth_and_reset = __qcom_scm_pas_auth_and_reset, - .prepare_and_auth_reset = __qcom_scm_pas_prepare_and_auth_reset, - .set_remote_state = __qcom_scm_pas_set_remote_state, - .shutdown = __qcom_scm_pas_shutdown, - .metadata_release = __qcom_scm_pas_metadata_release, + .supported = qcom_scm_pas_supported, + .init_image = qcom_scm_pas_init_image, + .mem_setup = qcom_scm_pas_mem_setup, + .get_rsc_table = qcom_scm_pas_get_rsc_table, + .auth_and_reset = qcom_scm_pas_auth_and_reset, + .prepare_and_auth_reset = qcom_scm_pas_prepare_and_auth_reset, + .set_remote_state = qcom_scm_pas_set_remote_state, + .shutdown = qcom_scm_pas_shutdown, + .metadata_release = qcom_scm_pas_metadata_release, };

/** diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h index 5747bd191bf1..a0a6bc0229c4 100644 --- a/include/linux/firmware/qcom/qcom_scm.h +++ b/include/linux/firmware/qcom/qcom_scm.h @@ -64,35 +64,6 @@ bool qcom_scm_is_available(void); int qcom_scm_set_cold_boot_addr(void *entry); int qcom_scm_set_warm_boot_addr(void *entry); void qcom_scm_cpu_power_down(u32 flags); -int qcom_scm_set_remote_state(u32 state, u32 id); - -struct qcom_scm_pas_context { - struct device *dev; - u32 pas_id; - phys_addr_t mem_phys; - size_t mem_size; - void *ptr; - dma_addr_t phys; - ssize_t size; - bool use_tzmem; -}; - -struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev, - u32 pas_id, - phys_addr_t mem_phys, - size_t mem_size); -int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, - struct qcom_scm_pas_context *ctx); -void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx); -int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size); -int qcom_scm_pas_auth_and_reset(u32 pas_id); -int qcom_scm_pas_shutdown(u32 pas_id); -bool qcom_scm_pas_supported(u32 pas_id); -struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx, - void *input_rt, size_t input_rt_size, - size_t *output_rt_size); - -int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx);

int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val); int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);