October 2026 - OP-TEE - lists.trustedfirmware.org

[PATCH v4 0/3] Add TPM support via Qualcomm TEE TPM TA

by Kuldeep Singh

Qualcomm platforms with a discrete TPM (dTPM) talked to it directly over a non-secure SPI channel from the kernel. Arm's Base Boot Security Requirements (BBSR) v1.4 require that access to go through TrustZone instead, so on affected Qualcomm platforms the TPM 2.0 instance is now fronted by a Trusted Application (TA) running inside Qualcomm's Trusted Execution Environment (QTEE), which talks to the dTPM (or implements an fTPM) on the kernel's behalf. This series adds a kernel driver for that TA, built on the QCOMTEE object-IPC transport (drivers/tee/qcomtee/) already used to reach other QTEE services. This patch series functionally depends on below(first 5 changes specially) for qtee service discovery. - https://lore.kernel.org/lkml/20261015-qcom_uefisecapp_migrate_qcomtee-v5-0-… Tested on Glymur-crd target with tpm2-tools utility. Validations: - Get capabilities - Random number generator - RSA key creation, encryption and decryption. Signed-off-by: Kuldeep Singh <kuldeep.singh(a)oss.qualcomm.com> --- Changes in v4: - Add new line before goto label(Jarkko). - Link to v3: https://patch.msgid.link/20261015-tpm_qcom_driver-v3-0-247c8e50250e@qti.qua… Changes in v3: - Merge tpm_qcom.h into tpm_qcom.c(Amir comments) - Update return values of functions and drop certain error prints. - Define locality_arg as default value. - Add Jarkko's tag on all but drop from 2/3 as significant changes done. - Link to v2: https://patch.msgid.link/20260907-tpm_qcom_driver-v2-0-71a6b1752da8@oss.qua… Changes in v2: - Use QCOMTEE_TPM_UID as 81 for service discovery in patch 1. - Use FIELD_GET, zero initialised array and log improvement (Konrad) - Improve commit title and other fixes (Jarkko) - Split MAINTAINERS entry as separate patch. - Link to v1: https://patch.msgid.link/20260831-tpm_qcom_driver-v1-0-6f16fa6924fa@oss.qua… To: Amirreza Zarrabi <amirreza.zarrabi(a)oss.qualcomm.com> To: Jens Wiklander <jenswi(a)kernel.org> To: Sumit Garg <sumit.garg(a)kernel.org> To: Peter Huewe <peterhuewe(a)gmx.de> To: Jarkko Sakkinen <jarkko(a)kernel.org> To: Jason Gunthorpe <jgg(a)ziepe.ca> To: Kuldeep Singh <kuldeep.singh(a)oss.qualcomm.com> Cc: linux-arm-msm(a)vger.kernel.org Cc: op-tee(a)lists.trustedfirmware.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-integrity(a)vger.kernel.org --- Kuldeep Singh (3): tee: qcomtee: Register qcom.tz.tpm service for discovery tpm: Introduce Qualcomm TPM driver MAINTAINERS: Add Qualcomm TPM driver entry MAINTAINERS | 6 + drivers/char/tpm/Kconfig | 9 + drivers/char/tpm/Makefile | 1 + drivers/char/tpm/tpm_qcom.c | 414 ++++++++++++++++++++++++++++++++++++++ drivers/tee/qcomtee/call.c | 4 +- drivers/tee/qcomtee/qcomtee_msg.h | 2 + 6 files changed, 435 insertions(+), 1 deletion(-) --- base-commit: 2efb7a11f1aa4d2dc285fe2680cca22cb9f72f64 change-id: 20260831-tpm_qcom_driver-d21c720e73b2 prerequisite-change-id: 20260408-qcom_uefisecapp_migrate_qcomtee-13869d45e014:v5 prerequisite-patch-id: faf4520d818abf0d7533f71d9c8b9a8aade34626 prerequisite-patch-id: b487dfe2fbc076f4815dc6c73b9e68b0b78c961f prerequisite-patch-id: 9f2c4ee37ba173bdc860f253d44974379f2cf125 prerequisite-patch-id: e86905ac6289821db30fd9a17f73e276e0a88363 prerequisite-patch-id: 8777bfa2ef8344715bf972d049acb0a6ef49b136 prerequisite-patch-id: 1c7f946e770a1cbc1599f9571282c9265a6af9cd prerequisite-patch-id: 7be993abea2ca36057d9352381a5890f50996dda Best regards, -- Kuldeep Singh <kuldeep.singh(a)oss.qualcomm.com>

1 hour, 29 minutes

2
7
0 0

[PATCH] tee: optee: allocate a bitmap for all valid notification keys

by Amirreza Zarrabi

Notification keys are checked against an inclusive maximum, but optee_notif_init() passes that maximum to bitmap_zalloc() as the number of bits. The bitmap is therefore one bit short. When the maximum key is a multiple of BITS_PER_LONG, accessing that key reads or writes beyond the allocated bitmap. Word rounding masks the problem. Allocate max_key + 1 bits so that the highest valid key has storage. Fixes: 787c80cc7b22 ("optee: separate notification functions") Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi(a)oss.qualcomm.com> --- drivers/tee/optee/notif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tee/optee/notif.c b/drivers/tee/optee/notif.c index 68014222d7be..2bf5ce397233 100644 --- a/drivers/tee/optee/notif.c +++ b/drivers/tee/optee/notif.c @@ -114,7 +114,7 @@ int optee_notif_init(struct optee *optee, u_int max_key) { spin_lock_init(&optee->notif.lock); INIT_LIST_HEAD(&optee->notif.db); - optee->notif.bitmap = bitmap_zalloc(max_key, GFP_KERNEL); + optee->notif.bitmap = bitmap_zalloc(max_key + 1, GFP_KERNEL); if (!optee->notif.bitmap) return -ENOMEM; --- base-commit: becb95e45ef0dda9ffb35156d909d3da7a2789c3 change-id: 20261009-fix-tee-max-keys-50f2db87b4e5 Best regards, -- Amirreza Zarrabi <amirreza.zarrabi(a)oss.qualcomm.com>

1 day, 21 hours

2
1
0 0

[PATCH v3 0/3] Add TPM support via Qualcomm TEE TPM TA

by Kuldeep Singh

Qualcomm platforms with a discrete TPM (dTPM) talked to it directly over a non-secure SPI channel from the kernel. Arm's Base Boot Security Requirements (BBSR) v1.4 require that access to go through TrustZone instead, so on affected Qualcomm platforms the TPM 2.0 instance is now fronted by a Trusted Application (TA) running inside Qualcomm's Trusted Execution Environment (QTEE), which talks to the dTPM (or implements an fTPM) on the kernel's behalf. This series adds a kernel driver for that TA, built on the QCOMTEE object-IPC transport (drivers/tee/qcomtee/) already used to reach other QTEE services. This patch series functionally depends on below(first 5 changes specially) for qtee service discovery. - https://lore.kernel.org/lkml/20261006-qcom_uefisecapp_migrate_qcomtee-v4-0-… Tested on Glymur-crd target with tpm2-tools utility. Validations: - Get capabilities - Random number generator - RSA key creation, encryption and decryption. Signed-off-by: Kuldeep Singh <kuldeep.singh(a)oss.qualcomm.com> --- Changes in v3: - Merge tpm_qcom.h into tpm_qcom.c(Amir comments) - Update return values of functions and drop certain error prints. - Define locality_arg as default value. - Add Jarrko's tag on all but drop from 2/3 as significant changes done. - Link to v2: https://patch.msgid.link/20260907-tpm_qcom_driver-v2-0-71a6b1752da8@oss.qua… Changes in v2: - Use QCOMTEE_TPM_UID as 81 for service discovery in patch 1. - Use FIELD_GET, zero initialised array and log improvement (Konrad) - Improve commit title and other fixes (Jarkko) - Split MAINTAINERS entry as separate patch. - Link to v1: https://patch.msgid.link/20260831-tpm_qcom_driver-v1-0-6f16fa6924fa@oss.qua… To: Amirreza Zarrabi <amirreza.zarrabi(a)oss.qualcomm.com> To: Jens Wiklander <jenswi(a)kernel.org> To: Sumit Garg <sumit.garg(a)kernel.org> To: Peter Huewe <peterhuewe(a)gmx.de> To: Jarkko Sakkinen <jarkko(a)kernel.org> To: Jason Gunthorpe <jgg(a)ziepe.ca> To: Kuldeep Singh <kuldeep.singh(a)oss.qualcomm.com> Cc: linux-arm-msm(a)vger.kernel.org Cc: op-tee(a)lists.trustedfirmware.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-integrity(a)vger.kernel.org --- Kuldeep Singh (3): tee: qcomtee: Register qcom.tz.tpm service for discovery tpm: Introduce Qualcomm TPM driver MAINTAINERS: Add Qualcomm TPM driver entry MAINTAINERS | 6 + drivers/char/tpm/Kconfig | 9 + drivers/char/tpm/Makefile | 1 + drivers/char/tpm/tpm_qcom.c | 413 ++++++++++++++++++++++++++++++++++++++ drivers/tee/qcomtee/call.c | 4 +- drivers/tee/qcomtee/qcomtee_msg.h | 2 + 6 files changed, 434 insertions(+), 1 deletion(-) --- base-commit: d419d682257d813f6cb7a28e42b35d0edf4ad038 change-id: 20260831-tpm_qcom_driver-d21c720e73b2 prerequisite-change-id: 20260408-qcom_uefisecapp_migrate_qcomtee-13869d45e014:v4 prerequisite-patch-id: faf4520d818abf0d7533f71d9c8b9a8aade34626 prerequisite-patch-id: b487dfe2fbc076f4815dc6c73b9e68b0b78c961f prerequisite-patch-id: aef7dba7d7662f87cb06bbf5cabca93304843f02 prerequisite-patch-id: bbdd5327c15aeaa99ce9b74bab324a98f084ed48 prerequisite-patch-id: 6263a8a3b40df5cce7fbe4b119f4b9d67a4c06b4 prerequisite-patch-id: 0c1a650a54014eb20f7ab9ec20038b49e42680e1 prerequisite-patch-id: 7be993abea2ca36057d9352381a5890f50996dda Best regards, -- Kuldeep Singh <kuldsing(a)qti.qualcomm.com>

2 days, 3 hours

2
7
0 0

[PATCH v5 0/7] Add TEE based client driver for UEFI Secure Application

by Harshal Dev

On Qualcomm SoC based platforms, UEFI stores EFI variables within the Replay Protected Memory Block (RPMB) located within either the UFS, eMMC or SPI-NOR storage. The RPMB key which is one-time programmed into the storage controller to allow authentication of the RPMB frames is generated by and only available to the Qualcomm Trusted Execution Environment (QTEE). Thus, only QTEE can prepare the RPMB frames which will be accepted by the storage controller. The legacy QSEECOM protocol used for communicating with the QTEE is deprecated and replaced with the use-case agnostic SMCInvoke protocol starting with the Qualcomm SM8x50 series. On platforms where the QSEECOM protocol still works (the QSEECOM driver probes) the driver does not support a listener interface with QTEE to enable writing of non-volatile EFI variables (via listener requests to Linux from QTEE) to the RPMB for UFS and eMMC storage. (Qualcomm Compute platforms with SPI-NOR storage are an exception to this and work with QSEECOM, see the NOTE below) Therefore on such platforms, a TEE client driver (which communicates with QTEE via the SMCInvoke protocol implemented by the QCOMTEE driver registered with the TEE subsystem) must be used to update such EFI variables through the RPMB service hosted in the QTEE supplicant user-space daemon [1] which forwards RPMB packets to the RPMB device. This series introduces such a uefisecapp TEE client driver for the aforementioned Qualcomm platforms which installs efi-var operations _if_ the QCOMTEE driver registers support for an object-IPC based uefisecapp service on the TEE bus during its probe. Only new QTEE firmware versions available at [2] provide access to the uefisecapp service via the SMCInvoke protocol. Thus, QCOMTEE now maintains a static list of always-available object-IPC based secure services exposed by QTEE. These services are implemented either within the QTEE kernel or within a pre-loaded Trusted Application (TA) usually loaded by the bootloader. The uefisecapp TA is an example of a preloaded TA loaded by UEFI. A static list is required since QTEE does not yet expose any way to dynamically query and enumerate the services exposed by it. To facilitate object-IPC interactions from the kernel-space, this series also introduces a tee_client_object_invoke_func() to allow invocation of TEE objects similar to the existing tee_client_invoke_func() API exported by the TEE subsystem which allows invocation of TEE functions. Some suporting changes are also introduced to track and handle operations for TEE contexts opened from the kernel-space in the back-end QCOM-TEE driver. Finally and as previously mentioned, access to the object-IPC based uefisecapp service is restricted on older QTEE firmware versions. A new QTEE firmware release must be picked up from QArtifactory [2] for all upstream supported Qualcomm SoCs to enable access to uefisecapp service via the TEE client driver. This patch series has been validated on Kodiak RB3Gen2 platform with UFS storage by attempting to read/write EFI variables via the efivar tool [3] after mounting the efivarfs filesystem. See [4] for an example. NOTE: Since Compute platforms do not have a firmware running on their SPI-NOR storage controller which must be programmed with a RPMB key, QTEE has a SPI-NOR driver which holds the key, and so the QSEECOM driver can be used for updating EFI variables on these platforms because QTEE never makes a listener request to Linux (QTEE doesn't need the Linux SPI-NOR driver). Such platforms are outlined in the following static list [5]. Merge Strategy: This patch series could either be taken from the OP-TEE tree or the QCOM soc tree. I would prefer it to be picked by the OP-TEE tree since all except the uefisecapp TEE client driver patch in this series make changes relevant to the TEE subsystem. It would be great if the QCOM soc tree maintainers can Ack the uefisecapp driver patch. [1] https://github.com/qualcomm/minkipc [2] https://shorturl.at/zQU07 [3] https://github.com/rhboot/efivar [4] https://docs.qualcomm.com/doc/80-70020-27/topic/manage_uefi_environment_var… [5] https://elixir.bootlin.com/linux/v7.3-rc5/source/drivers/firmware/qcom/qcom… Signed-off-by: Harshal Dev <harshal.dev(a)oss.qualcomm.com> --- Changes in v5: - Fixed comment in qcomtee_object.h to drop '+'. - Removed duplicate function doc for tee_generate_uuid_v5() in .c file. - Fixed qtee_register_services() doc. - Dropped unused QTEE_UUID_NS_NAME_SIZE macro. - Optimized qcomtee_uefi_query_variable_info() to drop redundant stack variables. - Migrated to block comment format everywhere in qcom_tee_uefisecapp.c. - Drop comments which highlight obvious stuff in qcomtee_uefisecapp_probe(). - Collected Reviewed-by tags from Amir. - Link to v4: https://lore.kernel.org/r/20261006-qcom_uefisecapp_migrate_qcomtee-v4-0-bf1… Changes in v4: - Fixed kernel test robot warnings with gcc v16.1.0 [-Wvla-larger-than]. - Update parameter docs for qcomtee_object_invoke() and param_to/from_args(). - Split the defconfig change enabling the UefiSecApp TEE driver into a separate commit. - Use pr_debug() instead of pr_err() when QTEE says it does not implement a service being enumerated. - Re-name qtee_enumerate_service*() functions to qtee_register_service*(). - Collected Reviewed/Acked-by tags from Sumit. - Link to v3: https://lore.kernel.org/r/20261001-qcom_uefisecapp_migrate_qcomtee-v3-0-13d… Changes in v3: - Updated the cover letter and commit messages to highlight the following: 1. Only QTEE has the ability to prepare RPMB frames since it generates and holds the RPMB key. 2. The QSEECOM protocol is deprecated on new platforms and so this series migrates the uefisecapp to SMCInvoke which is a use-case agnostic, transport focused and easier to maintain protocol. - Use single if statement to update both flags and addr/uaddr. - Remove redundant use of new error variable in qcomtee_get_qtee_feature_list(). - Minor fixes such as concise error prints and use of better error codes. - Fix a double free in qtee_enumerate_service(). - Re-org the qcomtee_enumerate_services() function to re-use the same oic and client_env object. - Remove depends on !QCOM_QSEECOM_UEFISECAPP from Kconfig since both drivers can co-exist even on platforms that support both QSEECOM and SMCInvoke protocols. - Update the Kconfig description to better help the user understand when to enable the TEE based uefisecapp driver. - Removed qcom_tee_uefisecapp.h file and inline the header in qcom_tee_uefisecapp.c - Rebased patch series onto the latest linux next tag: next-20260930. - Link to v2: https://lore.kernel.org/r/20260722-qcom_uefisecapp_migrate_qcomtee-v2-0-b8a… Changes in v2: - Drop using MSB of the object_id to distingush kernel and user object invoke contexts. - Introduce enum tee_object_invoke_origin to check the context of object invocation. - Link to v1: https://lore.kernel.org/r/20260707-qcom_uefisecapp_migrate_qcomtee-v1-0-f65… --- Amirreza Zarrabi (2): tee: Add kernel client object invoke helper tee: qcomtee: Allow object invokes from kernel clients Harshal Dev (5): tee: qcomtee: Track the object invocation context tee: Export uuidv5 generation for TEE backends tee: qcomtee: Add support for registering QTEE services on TEE bus firmware: qcom: Add support for TEE based EFI-var client driver arm64: defconfig: Enable UefiSecApp TEE client driver for Qualcomm SoCs MAINTAINERS | 6 + arch/arm64/configs/defconfig | 1 + drivers/firmware/qcom/Kconfig | 31 ++ drivers/firmware/qcom/Makefile | 1 + drivers/firmware/qcom/qcom_tee_uefisecapp.c | 644 ++++++++++++++++++++++++++++ drivers/tee/qcomtee/call.c | 210 ++++++++- drivers/tee/qcomtee/core.c | 9 +- drivers/tee/qcomtee/qcomtee.h | 10 + drivers/tee/qcomtee/qcomtee_msg.h | 1 + drivers/tee/qcomtee/qcomtee_object.h | 16 +- drivers/tee/tee_core.c | 34 +- include/linux/tee_core.h | 23 +- include/linux/tee_drv.h | 18 +- 13 files changed, 959 insertions(+), 45 deletions(-) --- base-commit: 6c2cb8b8b843d216ab549b678a0d8831c43153e0 change-id: 20260408-qcom_uefisecapp_migrate_qcomtee-13869d45e014 Best regards, -- Harshal Dev <harshal.dev(a)oss.qualcomm.com>

4 days, 20 hours

2
12
0 0

OP-TEE 4.11.0 has been released

by Jens Wiklander

Hi, I'm pleased to announce that OP-TEE version 4.11.0 is now available. The list of changes can be found in the changelog [1]. It has been six months since the previous release, which is longer than usual. We normally release every three months, and we’re now resuming our regular cadence. A big thank you to everyone who participated with contributions and helping out with testing the release [2]. [1] https://github.com/OP-TEE/optee_os/blob/4.11.0/CHANGELOG.md [2] https://github.com/OP-TEE/optee_os/commit/f54190f22611dd5ad5d22546fd4209aa1… Regards, Jens

4 days, 23 hours

1
0
0 0

[GIT PULL] OP-TEE update for v7.4

by Jens Wiklander

Hello soc maintainers, Please pull this patch to only build the SMC and FF-A code where supported. The OP-TEE driver is still only built for Arm, but that will change in a not too distant future. Thanks, Jens The following changes since commit 8d3ae59288f1e7d58d76558a6ee96d533bc5019f: Linux 7.2 (2026-08-16 14:32:26 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee.git tags/optee-for-v7.4 for you to fetch changes up to ccd4b23398acaf2139cf04f1ba0a66150cbf2663: tee: optee: build the Arm-specific code only on Arm (2026-10-02 16:28:41 +0200) ---------------------------------------------------------------- Build the OP-TEE driver's SMC and FF-A code only where supported ---------------------------------------------------------------- Marouene Boubakri (1): tee: optee: build the Arm-specific code only on Arm drivers/tee/optee/Kconfig | 1 + drivers/tee/optee/Makefile | 4 ++-- drivers/tee/optee/ffa_abi.c | 8 ++------ drivers/tee/optee/notif.c | 1 - drivers/tee/optee/optee_private.h | 39 ++++++++++++++++++++++++++++++++++++++- 5 files changed, 43 insertions(+), 10 deletions(-)

1 week

2
2
0 0

[PATCH v2 0/8] arm64: Unmap FF-A lent memory from direct map

by Vincent Donnefort

This series is a follow-up to the discussion that has started here [1]. When memory is lent to the Secure world via FF-A, CPU speculative accesses from NS to the lent pages can still occur as long as it retains a cacheable mapping to it. Ideally, lent memory would be "no-map" but that would mean giving up MiBs of useful memory, so let's try to do better with the help of a CMA pool. On arm64, modifying the direct map at runtime is generally restricted because the linear map defaults to block mapping and splitting blocks at runtime may trigger fatal page fault, unless the CPU implements BBML3 or the entire direct map was mapped at page granularity from boot. Forcing last-level mappings system-wide incurs a severe penalty we want to avoid. Instead, this series introduces targeted last-level mappings for designated memory regions, along with the "arm,ffa-lend-pool" CMA driver to manage unmapping and remapping on lend/reclaim transitions: 1. memblock: - Introduce MEMBLOCK_PTEMAP to force PTE mappings only for a specific region. 2. set_memory infrastructure: - Introduce can_set_direct_map_range() to check if a specific address range is mapped with last-level entries and can be modified safely. - Introduce __set_direct_map_*() variants that bypass redundant checks when the caller has already validated the range. 3. "arm,ffa-lend-pool" driver - Introduce the "arm,ffa-lend-pool" CMA reserved-memory driver, which unmaps pages prior to lending (ffa_prepare_lend()) and restores them when reclaimed (ffa_lend_reclaimed()). 4. Optee support - Hook OP-TEE dynamic protected memory pools to "arm,ffa-lend-pool" for both SMC (via DT memory-region phandle) and FF-A (via ffa_lend_pool_attach()) transports. Testing: ======== Tested with QEMU v8 using OP-TEE OS (built with CFG_CORE_DYN_PROTMEM=y) under both SMC and FF-A transports [2] static void dump_direct_map(const char *label) { printf("\n=== %s ===\n", label); fflush(stdout); system("sed -n '/Linear Mapping start/,/Linear Mapping end/p' /sys/kernel/debug/kernel_page_tables"); fflush(stdout); } int main(int argc, char *argv[]) { int heap_fd; int dmabuf_fd; struct dma_heap_allocation_data data = { 0 }; size_t size = 1024 * 1024; /* 1MB */ if (argc > 1) size = strtoul(argv[1], NULL, 0); dump_direct_map("BEFORE ALLOCATION"); heap_fd = open("/dev/dma_heap/protected,secure-video", O_RDWR); if (heap_fd < 0) { perror("open /dev/dma_heap/protected,secure-video"); return 1; } printf("\nOpened /dev/dma_heap/protected,secure-video\n"); printf("Allocating %zu bytes of protected memory via DMA heap...\n", size); data.len = size; data.fd_flags = O_RDWR | O_CLOEXEC; if (ioctl(heap_fd, DMA_HEAP_IOCTL_ALLOC, &data) < 0) { perror("ioctl DMA_HEAP_IOCTL_ALLOC"); close(heap_fd); return 1; } dmabuf_fd = data.fd; printf("Successfully allocated %zu bytes! dmabuf_fd = %d\n", size, dmabuf_fd); dump_direct_map("DURING LEND (EXPECT HOLE IN DIRECT MAP)"); printf("\nReleasing dmabuf_fd...\n"); close(dmabuf_fd); close(heap_fd); dump_direct_map("AFTER RECLAIM (RESTORED DIRECT MAP)"); return 0; } [1] https://lore.kernel.org/all/20260807-tegra-vpr-v4-7-5510d16af89e@nvidia.com/ [2] https://optee.readthedocs.io/en/latest/building/gits/build.html#qemu-v8 Changelog: v2: - Rename MEMBLOCK_LLMAP to MEMBLOCK_PTEMAP (Mike) - Warn on conflicting MEMBLOCK_NOMAP and MEMBLOCK_PTEMAP flags (Mike) - Drop DT "ll-map" property and mark MEMBLOCK_PTEMAP from ffa_lend_pool_setup() (Rob, Thierry) - Drop "reusable" and "no-map" property checks from ffa_lend_pool_setup() (Rob) - dt-bindings: Document arm,ffa-lend-pool (Rob) - Rework the Optee support with a separate ffa_lend_pool.c file. - use walk_kernel_page_table_range_lockless() for can_set_direct_map_range() to fix folded page table (Sashiko) - Add missing TLB flush in ffa_prepare_lend() - Disable hibernation - Rebase on linux-next (next-20260918) to use the new set_direct_map*() ranges (Mike) v1 (https://lore.kernel.org/all/20260902104712.2399797-1-vdonnefort@google.com/) Vincent Donnefort (8): memblock: Introduce MEMBLOCK_PTEMAP arm64: Introduce can_set_direct_map_range() arm64: Introduce __set_direct_map*() arm64: Add support for MEMBLOCK_PTEMAP firmware: arm_ffa: Introduce ffa-lend-pool optee: Add support for arm,ffa-lend-pool dt-bindings: reserved-memory: Add Arm FF-A lend pool dt-bindings: firmware: optee: Add memory-region property .../arm/firmware/linaro,optee-tz.yaml | 5 + .../reserved-memory/arm,ffa-lend-pool.yaml | 55 ++++ arch/arm64/include/asm/set_memory.h | 7 + arch/arm64/mm/mmu.c | 23 +- arch/arm64/mm/pageattr.c | 72 ++++- drivers/firmware/arm_ffa/Kconfig | 5 + drivers/firmware/arm_ffa/Makefile | 1 + drivers/firmware/arm_ffa/lend_pool.c | 261 ++++++++++++++++++ drivers/tee/optee/Makefile | 1 + drivers/tee/optee/core.c | 6 + drivers/tee/optee/ffa_abi.c | 13 +- drivers/tee/optee/ffa_lend_pool.c | 72 +++++ drivers/tee/optee/optee_private.h | 4 + drivers/tee/optee/protmem.c | 20 +- drivers/tee/optee/smc_abi.c | 21 +- include/linux/arm_ffa.h | 23 ++ include/linux/memblock.h | 18 ++ mm/memblock.c | 30 ++ 18 files changed, 608 insertions(+), 29 deletions(-) create mode 100644 Documentation/devicetree/bindings/reserved-memory/arm,ffa-lend-pool.yaml create mode 100644 drivers/firmware/arm_ffa/lend_pool.c create mode 100644 drivers/tee/optee/ffa_lend_pool.c base-commit: 3f2425f5b5bbbdd991ca9cdfd5502e68d8895998 -- 2.55.0.1082.g2b9226bbc0-goog

1 week

5
20
0 0

[PATCH RFC v3 0/9] tee: optee: add RPMI backend support on RISC-V

by Amirreza Zarrabi

This series adds an RPMI backend to the OP-TEE driver for RISC-V. It builds on the separately posted RPMI TEE transport series [1], which provides service discovery, synchronous calls, memory parcels and asynchronous signals. This revision is effectively a full rewrite of the original RFC. The generic RPMI transport has been separated from the OP-TEE backend, and the backend has been reworked around the service bus and a new OP-TEE control ABI. Unlike v1, the OP-TEE backend no longer manages SBI MPXY mailbox channels or implements RPMI TEE service-group operations directly. It binds to the OP-TEE service UUID on the RPMI TEE bus and uses the transport's public operations. No additional OP-TEE device-tree node is required. The backend reuses the common OP-TEE session, shared-memory, argument cache, call queue and RPC infrastructure. Shared memory is represented by RPMI parcel IDs and nonces. Yielding calls pass command and RPC buffer ranges within a parcel and resume suspended execution using an opaque token returned by OP-TEE. The OP-TEE control ABI uses fixed-width little-endian messages carried in TEE_CALL payloads rather than reproducing FF-A's register-based message layout. Asynchronous notifications use an allocated TEE-to-REE signal as a bottom-half doorbell, while ordinary logical notifications continue through the common RPC path. Matching OP-TEE OS support has been implemented locally. OpenSBI integration and end-to-end validation remain pending. This remains an RFC for review of the backend integration and Linux-to-OP-TEE protocol. This series depends on: - The RPMI TEE transport series [1]. - The OP-TEE notification bitmap fix, which allocates space for the inclusive maximum notification key [2]. [1] https://lore.kernel.org/op-tee/20261007-riscv-rpmi-tee-abi-v2-0-45939a13d22… [2] https://lore.kernel.org/op-tee/20261009-fix-tee-max-keys-v1-1-1462d96bf438@… Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi(a)oss.qualcomm.com> --- Changes in v3: - Use GlobalPlatform TEE result codes for OP-TEE control responses, keeping them separate from RPMI transport errors. - Combine the parcel ID and nonce into a single 64-bit global_id. - Make resume tokens opaque 32-bit values and track initial versus resumed calls separately. - Remove unnecessary __packed annotations from the OP-TEE ABI structures. - Share the global-ID-to-SHM mapping implementation between the FF-A and RPMI backends. - Replace the fixed SHM nonce with a per-instance IDA allocator; reuse nonces after successful reclamation. - Report the maximum notification key instead of a notification count, and use the negotiated maximum during initialization. - Consume capability-exchange results during probe. - Remove cleanup macros and use explicit resource-management paths. - Use rc consistently for Linux error returns. - Replace unnecessary unaligned accesses with endian conversions for naturally aligned ABI fields. - Link to v2: https://lore.kernel.org/r/20261005-rpmi-tee-service-grp-dev-v2-0-72f222e23e… Changes in v2: - Effectively rewrite the backend around the separately posted RPMI TEE transport and a new OP-TEE control ABI. - Remove backend-owned per-hart mailbox channels and the OP-TEE-specific device-tree binding. - Replace the register-like control payload with fixed-width messages, explicit command/RPC buffer ranges and opaque resume tokens. - Add a parcel-reference parameter layout carrying the parcel ID, nonce, and 64-bit offset and size without changing parameter size. - Make argument-offset support part of the baseline ABI and retain the common shared argument cache. - Use a transport-allocated signal for asynchronous bottom-half notifications. - Link to v1: https://lore.kernel.org/r/20260912-rpmi-tee-service-grp-dev-v1-0-1d1d35c2a8… --- Amirreza Zarrabi (9): tee: optee: share the global shared-memory ID mapping tee: optee: allow RPMI transport builds on RISC-V tee: optee: define the RPMI control and parcel-reference ABI tee: optee: add RPMI shared-memory and parameter support tee: optee: add RPMI dynamic shared-memory pool tee: optee: add RPMI RPC handling tee: optee: execute yielding RPMI calls tee: optee: bind RPMI services and negotiate backend capabilities tee: optee: support RPMI asynchronous notification doorbells drivers/tee/Kconfig | 3 +- drivers/tee/optee/Kconfig | 3 +- drivers/tee/optee/Makefile | 2 + drivers/tee/optee/call.c | 2 + drivers/tee/optee/core.c | 10 +- drivers/tee/optee/ffa_abi.c | 133 +---- drivers/tee/optee/optee_msg.h | 23 +- drivers/tee/optee/optee_private.h | 73 ++- drivers/tee/optee/optee_rpmi.h | 263 ++++++++++ drivers/tee/optee/rpmi_abi.c | 972 +++++++++++++++++++++++++++++++++++++ drivers/tee/optee/shm_handle_map.c | 138 ++++++ 11 files changed, 1498 insertions(+), 124 deletions(-) --- base-commit: bf1ee2bd5c2da8992f33c8950ef194aaff74ed6c change-id: 20260912-rpmi-tee-service-grp-dev-b2ce2f63e0df Best regards, -- Amirreza Zarrabi <amirreza.zarrabi(a)oss.qualcomm.com>

1 week, 1 day

1
9
0 0

[PATCH v4 0/7] Add TEE based client driver for UEFI Secure Application

by Harshal Dev

On Qualcomm SoC based platforms, UEFI stores EFI variables within the Replay Protected Memory Block (RPMB) located within either the UFS, eMMC or SPI-NOR storage. The RPMB key which is one-time programmed into the storage controller to allow authentication of the RPMB frames is generated by and only available to the Qualcomm Trusted Execution Environment (QTEE). Thus, only QTEE can prepare the RPMB frames which will be accepted by the storage controller. The legacy QSEECOM protocol used for communicating with the QTEE is deprecated and replaced with the use-case agnostic SMCInvoke protocol starting with the Qualcomm SM8x50 series. On platforms where the QSEECOM protocol still works (the QSEECOM driver probes) the driver does not support a listener interface with QTEE to enable writing of non-volatile EFI variables (via listener requests to Linux from QTEE) to the RPMB for UFS and eMMC storage. (Qualcomm Compute platforms with SPI-NOR storage are an exception to this and work with QSEECOM, see the NOTE below) Therefore on such platforms, a TEE client driver (which communicates with QTEE via the SMCInvoke protocol implemented by the QCOMTEE driver registered with the TEE subsystem) must be used to update such EFI variables through the RPMB service hosted in the QTEE supplicant user-space daemon [1] which forwards RPMB packets to the RPMB device. This series introduces such a uefisecapp TEE client driver for the aforementioned Qualcomm platforms which installs efi-var operations _if_ the QCOMTEE driver registers support for an object-IPC based uefisecapp service on the TEE bus during its probe. Only new QTEE firmware versions available at [2] provide access to the uefisecapp service via the SMCInvoke protocol. Thus, QCOMTEE now maintains a static list of always-available object-IPC based secure services exposed by QTEE. These services are implemented either within the QTEE kernel or within a pre-loaded Trusted Application (TA) usually loaded by the bootloader. The uefisecapp TA is an example of a preloaded TA loaded by UEFI. A static list is required since QTEE does not yet expose any way to dynamically query and enumerate the services exposed by it. To facilitate object-IPC interactions from the kernel-space, this series also introduces a tee_client_object_invoke_func() to allow invocation of TEE objects similar to the existing tee_client_invoke_func() API exported by the TEE subsystem which allows invocation of TEE functions. Some suporting changes are also introduced to track and handle operations for TEE contexts opened from the kernel-space in the back-end QCOM-TEE driver. Finally and as previously mentioned, access to the object-IPC based uefisecapp service is restricted on older QTEE firmware versions. A new QTEE firmware release must be picked up from QArtifactory [2] for all upstream supported Qualcomm SoCs to enable access to uefisecapp service via the TEE client driver. This patch series has been validated on Kodiak RB3Gen2 platform with UFS storage by attempting to read/write EFI variables via the efivar tool [3] after mounting the efivarfs filesystem. See [4] for an example. NOTE: Since Compute platforms do not have a firmware running on their SPI-NOR storage controller which must be programmed with a RPMB key, QTEE has a SPI-NOR driver which holds the key, and so the QSEECOM driver can be used for updating EFI variables on these platforms because QTEE never makes a listener request to Linux (QTEE doesn't need the Linux SPI-NOR driver). Such platforms are outlined in the following static list [5]. Merge Strategy: This patch series could either be taken from the OP-TEE tree or the QCOM soc tree. I would prefer it to be picked by the OP-TEE tree since all except the uefisecapp TEE client driver patch in this series make changes relevant to the TEE subsystem. It would be great if the QCOM soc tree maintainers can Ack the uefisecapp driver patch. [1] https://github.com/qualcomm/minkipc [2] https://shorturl.at/zQU07 [3] https://github.com/rhboot/efivar [4] https://docs.qualcomm.com/doc/80-70020-27/topic/manage_uefi_environment_var… [5] https://elixir.bootlin.com/linux/v7.3-rc5/source/drivers/firmware/qcom/qcom… Signed-off-by: Harshal Dev <harshal.dev(a)oss.qualcomm.com> --- Changes in v4: - Fixed kernel test robot warnings with gcc v16.1.0 [-Wvla-larger-than]. - Update parameter docs for qcomtee_object_invoke() and param_to/from_args(). - Split the defconfig change enabling the UefiSecApp TEE driver into a separate commit. - Use pr_debug() instead of pr_err() when QTEE says it does not implement a service being enumerated. - Re-name qtee_enumerate_service*() functions to qtee_register_service*(). - Collected Reviewed/Acked-by tags from Sumit. - Link to v3: https://lore.kernel.org/r/20261001-qcom_uefisecapp_migrate_qcomtee-v3-0-13d… Changes in v3: - Updated the cover letter and commit messages to highlight the following: 1. Only QTEE has the ability to prepare RPMB frames since it generates and holds the RPMB key. 2. The QSEECOM protocol is deprecated on new platforms and so this series migrates the uefisecapp to SMCInvoke which is a use-case agnostic, transport focused and easier to maintain protocol. - Use single if statement to update both flags and addr/uaddr. - Remove redundant use of new error variable in qcomtee_get_qtee_feature_list(). - Minor fixes such as concise error prints and use of better error codes. - Fix a double free in qtee_enumerate_service(). - Re-org the qcomtee_enumerate_services() function to re-use the same oic and client_env object. - Remove depends on !QCOM_QSEECOM_UEFISECAPP from Kconfig since both drivers can co-exist even on platforms that support both QSEECOM and SMCInvoke protocols. - Update the Kconfig description to better help the user understand when to enable the TEE based uefisecapp driver. - Removed qcom_tee_uefisecapp.h file and inline the header in qcom_tee_uefisecapp.c - Rebased patch series onto the latest linux next tag: next-20260930. - Link to v2: https://lore.kernel.org/r/20260722-qcom_uefisecapp_migrate_qcomtee-v2-0-b8a… Changes in v2: - Drop using MSB of the object_id to distingush kernel and user object invoke contexts. - Introduce enum tee_object_invoke_origin to check the context of object invocation. - Link to v1: https://lore.kernel.org/r/20260707-qcom_uefisecapp_migrate_qcomtee-v1-0-f65… --- Amirreza Zarrabi (2): tee: Add kernel client object invoke helper tee: qcomtee: Allow object invokes from kernel clients Harshal Dev (5): tee: qcomtee: Track the object invocation context tee: Export uuidv5 generation for TEE backends tee: qcomtee: Add support for registering QTEE services on TEE bus firmware: qcom: Add support for TEE based EFI-var client driver arm64: defconfig: Enable UefiSecApp TEE client driver for Qualcomm SoCs MAINTAINERS | 6 + arch/arm64/configs/defconfig | 1 + drivers/firmware/qcom/Kconfig | 31 ++ drivers/firmware/qcom/Makefile | 1 + drivers/firmware/qcom/qcom_tee_uefisecapp.c | 648 ++++++++++++++++++++++++++++ drivers/tee/qcomtee/call.c | 211 ++++++++- drivers/tee/qcomtee/core.c | 9 +- drivers/tee/qcomtee/qcomtee.h | 12 + drivers/tee/qcomtee/qcomtee_msg.h | 1 + drivers/tee/qcomtee/qcomtee_object.h | 16 +- drivers/tee/tee_core.c | 24 +- include/linux/tee_core.h | 23 +- include/linux/tee_drv.h | 18 +- 13 files changed, 967 insertions(+), 34 deletions(-) --- base-commit: 6c2cb8b8b843d216ab549b678a0d8831c43153e0 change-id: 20260408-qcom_uefisecapp_migrate_qcomtee-13869d45e014 Best regards, -- Harshal Dev <harshal.dev(a)oss.qualcomm.com>

1 week, 1 day

3
19
0 0

[GIT PULL] TEE fix for v7.3

by Jens Wiklander

Hello soc maintainers, Please pull this small fix for the TEE subsystem. I've only had the patch in linux-next for a day, but it has passed my local smoke tests. Thanks, Jens The following changes since commit 8d3ae59288f1e7d58d76558a6ee96d533bc5019f: Linux 7.2 (2026-08-16 14:32:26 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee.git tags/tee-fix-for-v7.3 for you to fetch changes up to b7f925fd5226deb953c8dcdc9677d3fcc2717c00: tee: shm: reject zero-sized allocations in tee_dyn_shm_alloc_helper() (2026-10-02 13:58:48 +0200) ---------------------------------------------------------------- Reject zero-sized allocations in tee_dyn_shm_alloc_helper() ---------------------------------------------------------------- Georgiy Osokin (1): tee: shm: reject zero-sized allocations in tee_dyn_shm_alloc_helper() drivers/tee/tee_shm.c | 4 ++++ 1 file changed, 4 insertions(+)

1 week, 2 days

2
1
0 0

2026

2025

2024

2023

2022

2021

2020

OP-TEE October 2026