From: Sumit Garg sumit.garg@oss.qualcomm.com

Qcom platforms has the legacy of using non-standard SCM calls splintered over the various kernel drivers. These SCM calls aren't compliant with the standard SMC calling conventions which is a prerequisite to enable migration to the FF-A specifications from Arm.

OP-TEE as an alternative trusted OS to Qualcomm TEE (QTEE) can't support these non-standard SCM calls. And even for newer architectures using S-EL2 with Hafnium support, QTEE won't be able to support SCM calls either with FF-A requirements coming in. And with both OP-TEE and QTEE drivers well integrated in the TEE subsystem, it makes further sense to reuse the TEE bus client drivers infrastructure.

The added benefit of TEE bus infrastructure is that there is support for discoverable/enumerable services. With that client drivers don't have to manually invoke a special SCM call to know the service status.

So enable the generic Peripheral Authentication Service (PAS) provided by the firmware. It acts as the common layer with different TZ backends plugged in whether it's an SCM implementation or a proper TEE bus based PAS service implementation.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Reviewed-by: Harshal Dev harshal.dev@oss.qualcomm.com Tested-by: Vignesh Viswanathan vignesh.viswanathan@oss.qualcomm.com # IPQ9650 Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/firmware/qcom/Kconfig | 8 + drivers/firmware/qcom/Makefile | 1 + drivers/firmware/qcom/qcom_pas.c | 299 +++++++++++++++++++++++++ drivers/firmware/qcom/qcom_pas.h | 50 +++++ include/linux/firmware/qcom/qcom_pas.h | 43 ++++ 5 files changed, 401 insertions(+) create mode 100644 drivers/firmware/qcom/qcom_pas.c create mode 100644 drivers/firmware/qcom/qcom_pas.h create mode 100644 include/linux/firmware/qcom/qcom_pas.h

diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig index b477d54b495a..9f66cc774508 100644 --- a/drivers/firmware/qcom/Kconfig +++ b/drivers/firmware/qcom/Kconfig @@ -6,6 +6,14 @@

menu "Qualcomm firmware drivers"

+config QCOM_PAS + tristate "Qualcomm generic PAS interface driver" + help + Enable the generic Peripheral Authentication Service (PAS) provided + by the firmware. It acts as the common layer with different TZ + backends plugged in whether it's an SCM implementation or a proper + TEE bus based PAS service implementation. + config QCOM_SCM select QCOM_TZMEM tristate diff --git a/drivers/firmware/qcom/Makefile b/drivers/firmware/qcom/Makefile index 0be40a1abc13..dc5ab45f906a 100644 --- a/drivers/firmware/qcom/Makefile +++ b/drivers/firmware/qcom/Makefile @@ -8,3 +8,4 @@ qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o obj-$(CONFIG_QCOM_TZMEM) += qcom_tzmem.o obj-$(CONFIG_QCOM_QSEECOM) += qcom_qseecom.o obj-$(CONFIG_QCOM_QSEECOM_UEFISECAPP) += qcom_qseecom_uefisecapp.o +obj-$(CONFIG_QCOM_PAS) += qcom_pas.o diff --git a/drivers/firmware/qcom/qcom_pas.c b/drivers/firmware/qcom/qcom_pas.c new file mode 100644 index 000000000000..0e47f1c8dbbd --- /dev/null +++ b/drivers/firmware/qcom/qcom_pas.c @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2010,2015,2019 The Linux Foundation. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <linux/device/devres.h> +#include <linux/firmware/qcom/qcom_pas.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include "qcom_pas.h" + +static struct qcom_pas_ops *ops_ptr; + +/** + * devm_qcom_pas_context_alloc() - Allocate peripheral authentication service + * context for a given peripheral + * + * PAS context is device-resource managed, so the caller does not need + * to worry about freeing the context memory. + * + * @dev: PAS firmware device + * @pas_id: peripheral authentication service id + * @mem_phys: Subsystem reserve memory start address + * @mem_size: Subsystem reserve memory size + * + * Return: The new PAS context, or ERR_PTR() on failure. + */ +struct qcom_pas_context *devm_qcom_pas_context_alloc(struct device *dev, + u32 pas_id, + phys_addr_t mem_phys, + size_t mem_size) +{ + struct qcom_pas_context *ctx; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return ERR_PTR(-ENOMEM); + + ctx->dev = dev; + ctx->pas_id = pas_id; + ctx->mem_phys = mem_phys; + ctx->mem_size = mem_size; + + return ctx; +} +EXPORT_SYMBOL_GPL(devm_qcom_pas_context_alloc); + +/** + * qcom_pas_init_image() - Initialize peripheral authentication service state + * machine for a given peripheral, using the metadata + * @pas_id: peripheral authentication service id + * @metadata: pointer to memory containing ELF header, program header table + * and optional blob of data used for authenticating the metadata + * and the rest of the firmware + * @size: size of the metadata + * @ctx: optional pas context + * + * Return: 0 on success. + * + * Upon successful return, the PAS metadata context (@ctx) will be used to + * track the metadata allocation, this needs to be released by invoking + * qcom_pas_metadata_release() by the caller. + */ +int qcom_pas_init_image(u32 pas_id, const void *metadata, size_t size, + struct qcom_pas_context *ctx) +{ + if (!ops_ptr) + return -ENODEV; + + return ops_ptr->init_image(ops_ptr->dev, pas_id, metadata, size, ctx); +} +EXPORT_SYMBOL_GPL(qcom_pas_init_image); + +/** + * qcom_pas_metadata_release() - release metadata context + * @ctx: pas context + */ +void qcom_pas_metadata_release(struct qcom_pas_context *ctx) +{ + if (!ops_ptr || !ctx || !ctx->ptr) + return; + + ops_ptr->metadata_release(ops_ptr->dev, ctx); +} +EXPORT_SYMBOL_GPL(qcom_pas_metadata_release); + +/** + * qcom_pas_mem_setup() - Prepare the memory related to a given peripheral + * for firmware loading + * @pas_id: peripheral authentication service id + * @addr: start address of memory area to prepare + * @size: size of the memory area to prepare + * + * Return: 0 on success. + */ +int qcom_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size) +{ + if (!ops_ptr) + return -ENODEV; + + return ops_ptr->mem_setup(ops_ptr->dev, pas_id, addr, size); +} +EXPORT_SYMBOL_GPL(qcom_pas_mem_setup); + +/** + * qcom_pas_get_rsc_table() - Retrieve the resource table in passed output buffer + * for a given peripheral. + * + * Qualcomm remote processor may rely on both static and dynamic resources for + * its functionality. Static resources typically refer to memory-mapped + * addresses required by the subsystem and are often embedded within the + * firmware binary and dynamic resources, such as shared memory in DDR etc., + * are determined at runtime during the boot process. + * + * On Qualcomm Technologies devices, it's possible that static resources are + * not embedded in the firmware binary and instead are provided by TrustZone. + * However, dynamic resources are always expected to come from TrustZone. This + * indicates that for Qualcomm devices, all resources (static and dynamic) will + * be provided by TrustZone PAS service. + * + * If the remote processor firmware binary does contain static resources, they + * should be passed in input_rt. These will be forwarded to TrustZone for + * authentication. TrustZone will then append the dynamic resources and return + * the complete resource table in output_rt_tzm. + * + * If the remote processor firmware binary does not include a resource table, + * the caller of this function should set input_rt as NULL and input_rt_size + * as zero respectively. + * + * More about documentation on resource table data structures can be found in + * include/linux/remoteproc.h + * + * @ctx: PAS context + * @pas_id: peripheral authentication service id + * @input_rt: resource table buffer which is present in firmware binary + * @input_rt_size: size of the resource table present in firmware binary + * @output_rt_size: TrustZone expects caller should pass worst case size for + * the output_rt_tzm. + * + * Return: + * On success, returns a pointer to the allocated buffer containing the final + * resource table and output_rt_size will have actual resource table size from + * TrustZone. The caller is responsible for freeing the buffer. On failure, + * returns ERR_PTR(-errno). + */ +struct resource_table *qcom_pas_get_rsc_table(struct qcom_pas_context *ctx, + void *input_rt, + size_t input_rt_size, + size_t *output_rt_size) +{ + if (!ops_ptr) + return ERR_PTR(-ENODEV); + if (!ctx) + return ERR_PTR(-EINVAL); + + return ops_ptr->get_rsc_table(ops_ptr->dev, ctx, input_rt, + input_rt_size, output_rt_size); +} +EXPORT_SYMBOL_GPL(qcom_pas_get_rsc_table); + +/** + * qcom_pas_auth_and_reset() - Authenticate the given peripheral firmware + * and reset the remote processor + * @pas_id: peripheral authentication service id + * + * Return: 0 on success. + */ +int qcom_pas_auth_and_reset(u32 pas_id) +{ + if (!ops_ptr) + return -ENODEV; + + return ops_ptr->auth_and_reset(ops_ptr->dev, pas_id); +} +EXPORT_SYMBOL_GPL(qcom_pas_auth_and_reset); + +/** + * qcom_pas_prepare_and_auth_reset() - Prepare, authenticate, and reset the + * remote processor + * + * @ctx: Context saved during call to devm_qcom_pas_context_alloc() + * + * This function performs the necessary steps to prepare a PAS subsystem, + * authenticate it using the provided metadata, and initiate a reset sequence. + * + * It should be used when Linux is in control setting up the IOMMU hardware + * for remote subsystem during secure firmware loading processes. The + * preparation step sets up a shmbridge over the firmware memory before + * TrustZone accesses the firmware memory region for authentication. The + * authentication step verifies the integrity and authenticity of the firmware + * or configuration using secure metadata. Finally, the reset step ensures the + * subsystem starts in a clean and sane state. + * + * Return: 0 on success, negative errno on failure. + */ +int qcom_pas_prepare_and_auth_reset(struct qcom_pas_context *ctx) +{ + if (!ops_ptr) + return -ENODEV; + if (!ctx) + return -EINVAL; + + return ops_ptr->prepare_and_auth_reset(ops_ptr->dev, ctx); +} +EXPORT_SYMBOL_GPL(qcom_pas_prepare_and_auth_reset); + +/** + * qcom_pas_set_remote_state() - Set the remote processor state + * @state: peripheral state + * @pas_id: peripheral authentication service id + * + * Return: 0 on success. + */ +int qcom_pas_set_remote_state(u32 state, u32 pas_id) +{ + if (!ops_ptr) + return -ENODEV; + + return ops_ptr->set_remote_state(ops_ptr->dev, state, pas_id); +} +EXPORT_SYMBOL_GPL(qcom_pas_set_remote_state); + +/** + * qcom_pas_shutdown() - Shut down the remote processor + * @pas_id: peripheral authentication service id + * + * Return: 0 on success. + */ +int qcom_pas_shutdown(u32 pas_id) +{ + if (!ops_ptr) + return -ENODEV; + + return ops_ptr->shutdown(ops_ptr->dev, pas_id); +} +EXPORT_SYMBOL_GPL(qcom_pas_shutdown); + +/** + * qcom_pas_supported() - Check if the peripheral authentication service is + * supported for the given peripheral + * @pas_id: peripheral authentication service id + * + * Return: true if PAS is supported for this peripheral, otherwise false. + */ +bool qcom_pas_supported(u32 pas_id) +{ + if (!ops_ptr) + return false; + + return ops_ptr->supported(ops_ptr->dev, pas_id); +} +EXPORT_SYMBOL_GPL(qcom_pas_supported); + +/** + * qcom_pas_is_available() - Check if the peripheral authentication service is + * available. Note that it is mandatory for any PAS + * client to invoke this API. If it returns true then + * only any other PAS API can be invoked. + * + * Return: true if PAS is available, otherwise false. + */ +bool qcom_pas_is_available(void) +{ + /* + * The barrier for ops_ptr is intended to synchronize the data stores + * for the ops data structure when client drivers are in parallel + * checking for PAS service availability. + * + * Once the PAS backend becomes available, it is allowed for multiple + * threads to enter TZ for parallel bringup of co-processors during + * boot. + */ + return !!smp_load_acquire(&ops_ptr); +} +EXPORT_SYMBOL_GPL(qcom_pas_is_available); + +void qcom_pas_ops_register(struct qcom_pas_ops *ops) +{ + if (!qcom_pas_is_available()) + /* Paired with smp_load_acquire() in qcom_pas_is_available() */ + smp_store_release(&ops_ptr, ops); + else + pr_err("qcom_pas: ops already registered by %s\n", + ops_ptr->drv_name); +} +EXPORT_SYMBOL_GPL(qcom_pas_ops_register); + +void qcom_pas_ops_unregister(void) +{ + /* Paired with smp_load_acquire() in qcom_pas_is_available() */ + smp_store_release(&ops_ptr, NULL); +} +EXPORT_SYMBOL_GPL(qcom_pas_ops_unregister); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Qualcomm generic TZ PAS driver"); diff --git a/drivers/firmware/qcom/qcom_pas.h b/drivers/firmware/qcom/qcom_pas.h new file mode 100644 index 000000000000..8643e2760602 --- /dev/null +++ b/drivers/firmware/qcom/qcom_pas.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef __QCOM_PAS_INT_H +#define __QCOM_PAS_INT_H + +struct device; + +/** + * struct qcom_pas_ops - Qcom Peripheral Authentication Service (PAS) ops + * @drv_name: PAS driver name. + * @dev: PAS device pointer. + * @supported: Peripheral supported callback. + * @init_image: Peripheral image initialization callback. + * @mem_setup: Peripheral memory setup callback. + * @get_rsc_table: Peripheral get resource table callback. + * @prepare_and_auth_reset: Peripheral prepare firmware authentication and + * reset callback. + * @auth_and_reset: Peripheral firmware authentication and reset + * callback. + * @set_remote_state: Peripheral set remote state callback. + * @shutdown: Peripheral shutdown callback. + * @metadata_release: Image metadata release callback. + */ +struct qcom_pas_ops { + const char *drv_name; + struct device *dev; + bool (*supported)(struct device *dev, u32 pas_id); + int (*init_image)(struct device *dev, u32 pas_id, const void *metadata, + size_t size, struct qcom_pas_context *ctx); + int (*mem_setup)(struct device *dev, u32 pas_id, phys_addr_t addr, + phys_addr_t size); + void *(*get_rsc_table)(struct device *dev, struct qcom_pas_context *ctx, + void *input_rt, size_t input_rt_size, + size_t *output_rt_size); + int (*prepare_and_auth_reset)(struct device *dev, + struct qcom_pas_context *ctx); + int (*auth_and_reset)(struct device *dev, u32 pas_id); + int (*set_remote_state)(struct device *dev, u32 state, u32 pas_id); + int (*shutdown)(struct device *dev, u32 pas_id); + void (*metadata_release)(struct device *dev, + struct qcom_pas_context *ctx); +}; + +void qcom_pas_ops_register(struct qcom_pas_ops *ops); +void qcom_pas_ops_unregister(void); + +#endif /* __QCOM_PAS_INT_H */ diff --git a/include/linux/firmware/qcom/qcom_pas.h b/include/linux/firmware/qcom/qcom_pas.h new file mode 100644 index 000000000000..65b1c9564458 --- /dev/null +++ b/include/linux/firmware/qcom/qcom_pas.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2010-2015, 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef __QCOM_PAS_H +#define __QCOM_PAS_H + +#include <linux/err.h> +#include <linux/types.h> + +struct qcom_pas_context { + struct device *dev; + u32 pas_id; + phys_addr_t mem_phys; + size_t mem_size; + void *ptr; + dma_addr_t phys; + ssize_t size; + bool use_tzmem; +}; + +bool qcom_pas_is_available(void); +struct qcom_pas_context *devm_qcom_pas_context_alloc(struct device *dev, + u32 pas_id, + phys_addr_t mem_phys, + size_t mem_size); +int qcom_pas_init_image(u32 pas_id, const void *metadata, size_t size, + struct qcom_pas_context *ctx); +struct resource_table *qcom_pas_get_rsc_table(struct qcom_pas_context *ctx, + void *input_rt, size_t input_rt_size, + size_t *output_rt_size); +int qcom_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size); +int qcom_pas_auth_and_reset(u32 pas_id); +int qcom_pas_prepare_and_auth_reset(struct qcom_pas_context *ctx); +int qcom_pas_set_remote_state(u32 state, u32 pas_id); +int qcom_pas_shutdown(u32 pas_id); +bool qcom_pas_supported(u32 pas_id); +void qcom_pas_metadata_release(struct qcom_pas_context *ctx); + +#endif /* __QCOM_PAS_H */

From: Sumit Garg sumit.garg@oss.qualcomm.com

Add support for Peripheral Authentication Service (PAS) driver based on TEE bus with OP-TEE providing the backend PAS service implementation.

The TEE PAS service ABI is designed to be extensible with additional API as PTA_QCOM_PAS_CAPABILITIES. This allows to accommodate any future extensions of the PAS service needed while still maintaining backwards compatibility.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Reviewed-by: Harshal Dev harshal.dev@oss.qualcomm.com Tested-by: Vignesh Viswanathan vignesh.viswanathan@oss.qualcomm.com # IPQ9650 Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/firmware/qcom/Kconfig | 10 + drivers/firmware/qcom/Makefile | 1 + drivers/firmware/qcom/qcom_pas_tee.c | 479 +++++++++++++++++++++++++++ 3 files changed, 490 insertions(+) create mode 100644 drivers/firmware/qcom/qcom_pas_tee.c

diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig index a5b3344289f7..c7f8413ab996 100644 --- a/drivers/firmware/qcom/Kconfig +++ b/drivers/firmware/qcom/Kconfig @@ -14,6 +14,16 @@ config QCOM_PAS backends plugged in whether it's an SCM implementation or a proper TEE bus based PAS service implementation.

+config QCOM_PAS_TEE + tristate "Qualcomm PAS TEE interface driver" + select QCOM_PAS + depends on TEE + depends on !CPU_BIG_ENDIAN + default m if ARCH_QCOM + help + Enable the generic Peripheral Authentication Service (PAS) provided + by the firmware TEE implementation as the backend. + config QCOM_SCM tristate "Qualcomm PAS SCM interface driver" select QCOM_PAS diff --git a/drivers/firmware/qcom/Makefile b/drivers/firmware/qcom/Makefile index dc5ab45f906a..48801d18f37b 100644 --- a/drivers/firmware/qcom/Makefile +++ b/drivers/firmware/qcom/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_TZMEM) += qcom_tzmem.o obj-$(CONFIG_QCOM_QSEECOM) += qcom_qseecom.o obj-$(CONFIG_QCOM_QSEECOM_UEFISECAPP) += qcom_qseecom_uefisecapp.o obj-$(CONFIG_QCOM_PAS) += qcom_pas.o +obj-$(CONFIG_QCOM_PAS_TEE) += qcom_pas_tee.o diff --git a/drivers/firmware/qcom/qcom_pas_tee.c b/drivers/firmware/qcom/qcom_pas_tee.c new file mode 100644 index 000000000000..ac33a00687aa --- /dev/null +++ b/drivers/firmware/qcom/qcom_pas_tee.c @@ -0,0 +1,479 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/firmware/qcom/qcom_pas.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/tee_drv.h> +#include <linux/uuid.h> + +#include "qcom_pas.h" + +/* + * Peripheral Authentication Service (PAS) supported. + * + * [in] params[0].value.a: Unique 32bit remote processor identifier + */ +#define TA_QCOM_PAS_IS_SUPPORTED 1 + +/* + * PAS capabilities. + * + * [in] params[0].value.a: Unique 32bit remote processor identifier + * [out] params[1].value.a: PAS capability flags + */ +#define TA_QCOM_PAS_CAPABILITIES 2 + +/* + * PAS image initialization. + * + * [in] params[0].value.a: Unique 32bit remote processor identifier + * [in] params[1].memref: Loadable firmware metadata + */ +#define TA_QCOM_PAS_INIT_IMAGE 3 + +/* + * PAS memory setup. + * + * [in] params[0].value.a: Unique 32bit remote processor identifier + * [in] params[0].value.b: Relocatable firmware size + * [in] params[1].value.a: 32bit LSB relocatable firmware memory address + * [in] params[1].value.b: 32bit MSB relocatable firmware memory address + */ +#define TA_QCOM_PAS_MEM_SETUP 4 + +/* + * PAS get resource table. + * + * [in] params[0].value.a: Unique 32bit remote processor identifier + * [inout] params[1].memref: Resource table config + */ +#define TA_QCOM_PAS_GET_RESOURCE_TABLE 5 + +/* + * PAS image authentication and co-processor reset. + * + * [in] params[0].value.a: Unique 32bit remote processor identifier + * [in] params[0].value.b: Firmware size + * [in] params[1].value.a: 32bit LSB firmware memory address + * [in] params[1].value.b: 32bit MSB firmware memory address + * [in] params[2].memref: Optional fw memory space shared/lent + */ +#define TA_QCOM_PAS_AUTH_AND_RESET 6 + +/* + * PAS co-processor set suspend/resume state. + * + * [in] params[0].value.a: Unique 32bit remote processor identifier + * [in] params[0].value.b: Co-processor state identifier + */ +#define TA_QCOM_PAS_SET_REMOTE_STATE 7 + +/* + * PAS co-processor shutdown. + * + * [in] params[0].value.a: Unique 32bit remote processor identifier + */ +#define TA_QCOM_PAS_SHUTDOWN 8 + +#define TEE_NUM_PARAMS 4 + +/** + * struct qcom_pas_tee_private - PAS service private data + * @dev: PAS service device. + * @ctx: TEE context handler. + * @session_id: PAS TA session identifier. + */ +struct qcom_pas_tee_private { + struct device *dev; + struct tee_context *ctx; + u32 session_id; +}; + +static bool qcom_pas_tee_supported(struct device *dev, u32 pas_id) +{ + struct qcom_pas_tee_private *data = dev_get_drvdata(dev); + struct tee_ioctl_invoke_arg inv_arg = { + .func = TA_QCOM_PAS_IS_SUPPORTED, + .session = data->session_id, + .num_params = TEE_NUM_PARAMS + }; + struct tee_param param[4] = { + [0] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = pas_id + } + }; + int ret; + + ret = tee_client_invoke_func(data->ctx, &inv_arg, param); + if (ret < 0 || inv_arg.ret != 0) { + dev_err(dev, "PAS not supported, pas_id: %d, ret: %d, err: 0x%x\n", + pas_id, ret, inv_arg.ret); + return false; + } + + return true; +} + +static int qcom_pas_tee_init_image(struct device *dev, u32 pas_id, + const void *metadata, size_t size, + struct qcom_pas_context *ctx) +{ + struct qcom_pas_tee_private *data = dev_get_drvdata(dev); + struct tee_ioctl_invoke_arg inv_arg = { + .func = TA_QCOM_PAS_INIT_IMAGE, + .session = data->session_id, + .num_params = TEE_NUM_PARAMS + }; + struct tee_param param[4] = { + [0] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = pas_id + }, + [1] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT, + } + }; + struct tee_shm *mdata_shm; + u8 *mdata_buf = NULL; + int ret; + + mdata_shm = tee_shm_alloc_kernel_buf(data->ctx, size); + if (IS_ERR(mdata_shm)) { + dev_err(dev, "mdata_shm allocation failed\n"); + return PTR_ERR(mdata_shm); + } + + mdata_buf = tee_shm_get_va(mdata_shm, 0); + if (IS_ERR(mdata_buf)) { + dev_err(dev, "mdata_buf get VA failed\n"); + tee_shm_free(mdata_shm); + return PTR_ERR(mdata_buf); + } + memcpy(mdata_buf, metadata, size); + + param[1].u.memref.shm = mdata_shm; + param[1].u.memref.size = size; + + ret = tee_client_invoke_func(data->ctx, &inv_arg, param); + if (ret < 0 || inv_arg.ret != 0) { + dev_err(dev, "PAS init image failed, pas_id: %d, ret: %d, err: 0x%x\n", + pas_id, ret, inv_arg.ret); + tee_shm_free(mdata_shm); + return ret ?: -EINVAL; + } + + if (ctx) + ctx->ptr = (void *)mdata_shm; + else + tee_shm_free(mdata_shm); + + return ret; +} + +static int qcom_pas_tee_mem_setup(struct device *dev, u32 pas_id, + phys_addr_t addr, phys_addr_t size) +{ + struct qcom_pas_tee_private *data = dev_get_drvdata(dev); + struct tee_ioctl_invoke_arg inv_arg = { + .func = TA_QCOM_PAS_MEM_SETUP, + .session = data->session_id, + .num_params = TEE_NUM_PARAMS + }; + struct tee_param param[4] = { + [0] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = pas_id, + .u.value.b = size, + }, + [1] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = lower_32_bits(addr), + .u.value.b = upper_32_bits(addr), + } + }; + int ret; + + ret = tee_client_invoke_func(data->ctx, &inv_arg, param); + if (ret < 0 || inv_arg.ret != 0) { + dev_err(dev, "PAS mem setup failed, pas_id: %d, ret: %d, err: 0x%x\n", + pas_id, ret, inv_arg.ret); + return ret ?: -EINVAL; + } + + return ret; +} + +DEFINE_FREE(shm_free, struct tee_shm *, tee_shm_free(_T)) + +static void *qcom_pas_tee_get_rsc_table(struct device *dev, + struct qcom_pas_context *ctx, + void *input_rt, size_t input_rt_size, + size_t *output_rt_size) +{ + struct qcom_pas_tee_private *data = dev_get_drvdata(dev); + struct tee_ioctl_invoke_arg inv_arg = { + .func = TA_QCOM_PAS_GET_RESOURCE_TABLE, + .session = data->session_id, + .num_params = TEE_NUM_PARAMS + }; + struct tee_param param[4] = { + [0] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = ctx->pas_id, + }, + [1] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT, + .u.memref.size = input_rt_size, + } + }; + void *rt_buf = NULL; + int ret; + + ret = tee_client_invoke_func(data->ctx, &inv_arg, param); + if (ret < 0 || inv_arg.ret != 0) { + dev_err(dev, "PAS get RT failed, pas_id: %d, ret: %d, err: 0x%x\n", + ctx->pas_id, ret, inv_arg.ret); + return ret ? ERR_PTR(ret) : ERR_PTR(-EINVAL); + } + + if (param[1].u.memref.size >= input_rt_size) { + struct tee_shm *rt_shm __free(shm_free) = + tee_shm_alloc_kernel_buf(data->ctx, + param[1].u.memref.size); + void *rt_shm_va; + + if (IS_ERR_OR_NULL(rt_shm)) { + dev_err(dev, "rt_shm allocation failed\n"); + rt_shm = NULL; + return ERR_PTR(-ENOMEM); + } + + rt_shm_va = tee_shm_get_va(rt_shm, 0); + if (IS_ERR(rt_shm_va)) { + dev_err(dev, "rt_shm get VA failed\n"); + return ERR_CAST(rt_shm_va); + } + memcpy(rt_shm_va, input_rt, input_rt_size); + + param[1].u.memref.shm = rt_shm; + ret = tee_client_invoke_func(data->ctx, &inv_arg, param); + if (ret < 0 || inv_arg.ret != 0) { + dev_err(dev, "PAS get RT failed, pas_id: %d, ret: %d, err: 0x%x\n", + ctx->pas_id, ret, inv_arg.ret); + return ret ? ERR_PTR(ret) : ERR_PTR(-EINVAL); + } + + if (param[1].u.memref.size) { + *output_rt_size = param[1].u.memref.size; + rt_buf = kmemdup(rt_shm_va, *output_rt_size, GFP_KERNEL); + if (!rt_buf) + return ERR_PTR(-ENOMEM); + } + } else { + *output_rt_size = 0; + } + + return rt_buf; +} + +static int __qcom_pas_tee_auth_and_reset(struct device *dev, u32 pas_id, + phys_addr_t mem_phys, size_t mem_size) +{ + struct qcom_pas_tee_private *data = dev_get_drvdata(dev); + struct tee_ioctl_invoke_arg inv_arg = { + .func = TA_QCOM_PAS_AUTH_AND_RESET, + .session = data->session_id, + .num_params = TEE_NUM_PARAMS + }; + struct tee_param param[4] = { + [0] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = pas_id, + .u.value.b = mem_size, + }, + [1] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = lower_32_bits(mem_phys), + .u.value.b = upper_32_bits(mem_phys), + }, + /* Reserved for fw memory space to be shared or lent */ + [2] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT, + } + }; + int ret; + + ret = tee_client_invoke_func(data->ctx, &inv_arg, param); + if (ret < 0 || inv_arg.ret != 0) { + dev_err(dev, "PAS auth reset failed, pas_id: %d, ret: %d, err: 0x%x\n", + pas_id, ret, inv_arg.ret); + return ret ?: -EINVAL; + } + + return ret; +} + +static int qcom_pas_tee_auth_and_reset(struct device *dev, u32 pas_id) +{ + return __qcom_pas_tee_auth_and_reset(dev, pas_id, 0, 0); +} + +static int qcom_pas_tee_prepare_and_auth_reset(struct device *dev, + struct qcom_pas_context *ctx) +{ + return __qcom_pas_tee_auth_and_reset(dev, ctx->pas_id, ctx->mem_phys, + ctx->mem_size); +} + +static int qcom_pas_tee_set_remote_state(struct device *dev, u32 state, + u32 pas_id) +{ + struct qcom_pas_tee_private *data = dev_get_drvdata(dev); + struct tee_ioctl_invoke_arg inv_arg = { + .func = TA_QCOM_PAS_SET_REMOTE_STATE, + .session = data->session_id, + .num_params = TEE_NUM_PARAMS + }; + struct tee_param param[4] = { + [0] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = pas_id, + .u.value.b = state, + } + }; + int ret; + + ret = tee_client_invoke_func(data->ctx, &inv_arg, param); + if (ret < 0 || inv_arg.ret != 0) { + dev_err(dev, "PAS set remote state failed, pas_id: %d, ret: %d, err: 0x%x\n", + pas_id, ret, inv_arg.ret); + return ret ?: -EINVAL; + } + + return ret; +} + +static int qcom_pas_tee_shutdown(struct device *dev, u32 pas_id) +{ + struct qcom_pas_tee_private *data = dev_get_drvdata(dev); + struct tee_ioctl_invoke_arg inv_arg = { + .func = TA_QCOM_PAS_SHUTDOWN, + .session = data->session_id, + .num_params = TEE_NUM_PARAMS + }; + struct tee_param param[4] = { + [0] = { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = pas_id + } + }; + int ret; + + ret = tee_client_invoke_func(data->ctx, &inv_arg, param); + if (ret < 0 || inv_arg.ret != 0) { + dev_err(dev, "PAS shutdown failed, pas_id: %d, ret: %d, err: 0x%x\n", + pas_id, ret, inv_arg.ret); + return ret ?: -EINVAL; + } + + return ret; +} + +static void qcom_pas_tee_metadata_release(struct device *dev, + struct qcom_pas_context *ctx) +{ + struct tee_shm *mdata_shm = ctx->ptr; + + tee_shm_free(mdata_shm); + ctx->ptr = NULL; +} + +static struct qcom_pas_ops qcom_pas_ops_tee = { + .drv_name = "qcom-pas-tee", + .supported = qcom_pas_tee_supported, + .init_image = qcom_pas_tee_init_image, + .mem_setup = qcom_pas_tee_mem_setup, + .get_rsc_table = qcom_pas_tee_get_rsc_table, + .auth_and_reset = qcom_pas_tee_auth_and_reset, + .prepare_and_auth_reset = qcom_pas_tee_prepare_and_auth_reset, + .set_remote_state = qcom_pas_tee_set_remote_state, + .shutdown = qcom_pas_tee_shutdown, + .metadata_release = qcom_pas_tee_metadata_release, +}; + +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) +{ + return ver->impl_id == TEE_IMPL_ID_OPTEE; +} + +static int qcom_pas_tee_probe(struct tee_client_device *pas_dev) +{ + struct device *dev = &pas_dev->dev; + struct qcom_pas_tee_private *data; + struct tee_ioctl_open_session_arg sess_arg = { + .clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL + }; + int ret; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL); + if (IS_ERR(data->ctx)) + return -ENODEV; + + export_uuid(sess_arg.uuid, &pas_dev->id.uuid); + ret = tee_client_open_session(data->ctx, &sess_arg, NULL); + if (ret < 0 || sess_arg.ret != 0) { + dev_err(dev, "tee_client_open_session failed, ret: %d, err: 0x%x\n", + ret, sess_arg.ret); + tee_client_close_context(data->ctx); + return ret ?: -EINVAL; + } + + data->session_id = sess_arg.session; + dev_set_drvdata(dev, data); + qcom_pas_ops_tee.dev = dev; + qcom_pas_ops_register(&qcom_pas_ops_tee); + + return ret; +} + +static void qcom_pas_tee_remove(struct tee_client_device *pas_dev) +{ + struct device *dev = &pas_dev->dev; + struct qcom_pas_tee_private *data = dev_get_drvdata(dev); + + qcom_pas_ops_unregister(); + tee_client_close_session(data->ctx, data->session_id); + tee_client_close_context(data->ctx); +} + +static const struct tee_client_device_id qcom_pas_tee_id_table[] = { + {UUID_INIT(0xcff7d191, 0x7ca0, 0x4784, + 0xaf, 0x13, 0x48, 0x22, 0x3b, 0x9a, 0x4f, 0xbe)}, + {} +}; +MODULE_DEVICE_TABLE(tee, qcom_pas_tee_id_table); + +static struct tee_client_driver optee_pas_tee_driver = { + .probe = qcom_pas_tee_probe, + .remove = qcom_pas_tee_remove, + .id_table = qcom_pas_tee_id_table, + .driver = { + .name = "qcom-pas-tee", + }, +}; + +module_tee_client_driver(optee_pas_tee_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Qualcomm PAS TEE driver");

From: Sumit Garg sumit.garg@oss.qualcomm.com

Switch qcom_q6v5_mss client driver over to generic PAS TZ APIs. Generic PAS TZ service allows to support multiple TZ implementation backends like QTEE based SCM PAS service, OP-TEE based PAS service and any further future TZ backend service.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/remoteproc/qcom_q6v5_mss.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c index ae78f5c7c1b6..96888007faa8 100644 --- a/drivers/remoteproc/qcom_q6v5_mss.c +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -34,6 +34,7 @@ #include "qcom_pil_info.h" #include "qcom_q6v5.h"

+#include <linux/firmware/qcom/qcom_pas.h> #include <linux/firmware/qcom/qcom_scm.h>

#define MPSS_CRASH_REASON_SMEM 421 @@ -1480,7 +1481,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc) }

if (qproc->need_pas_mem_setup) { - ret = qcom_scm_pas_mem_setup(MPSS_PAS_ID, qproc->mpss_phys, qproc->mpss_size); + ret = qcom_pas_mem_setup(MPSS_PAS_ID, qproc->mpss_phys, qproc->mpss_size); if (ret) { dev_err(qproc->dev, "setting up mpss memory failed: %d\n", ret); @@ -2077,7 +2078,7 @@ static int q6v5_probe(struct platform_device *pdev) if (!desc) return -EINVAL;

- if (desc->need_mem_protection && !qcom_scm_is_available()) + if (desc->need_mem_protection && !qcom_pas_is_available()) return -EPROBE_DEFER;

mba_image = desc->hexagon_mba_image;

From: Sumit Garg sumit.garg@oss.qualcomm.com

Select PAS generic service driver to enable support for multiple PAS backends like OP-TEE in addition to SCM.

Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Tested-by: Vignesh Viswanathan vignesh.viswanathan@oss.qualcomm.com # IPQ9650 Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/remoteproc/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index c521c744e7db..65befdbfa5f7 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -210,6 +210,7 @@ config QCOM_Q6V5_MSS select QCOM_Q6V5_COMMON select QCOM_RPROC_COMMON select QCOM_SCM + select QCOM_PAS help Say y here to support the Qualcomm self-authenticating modem subsystem based on Hexagon V5. The TrustZone based system is @@ -230,6 +231,7 @@ config QCOM_Q6V5_PAS select QCOM_Q6V5_COMMON select QCOM_RPROC_COMMON select QCOM_SCM + select QCOM_PAS help Say y here to support the TrustZone based Peripheral Image Loader for the Qualcomm remote processors. This is commonly used to control @@ -282,7 +284,7 @@ config QCOM_WCNSS_PIL select QCOM_MDT_LOADER select QCOM_PIL_INFO select QCOM_RPROC_COMMON - select QCOM_SCM + select QCOM_PAS help Say y here to support the Peripheral Image Loader for loading WCNSS firmware and boot the core on e.g. MSM8974, MSM8916. The firmware is

From: Sumit Garg sumit.garg@oss.qualcomm.com

Switch qcom media client drivers over to generic PAS TZ APIs. Generic PAS TZ service allows to support multiple TZ implementation backends like QTEE based SCM PAS service, OP-TEE based PAS service and any further future TZ backend service.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/media/platform/qcom/iris/Kconfig | 27 ++++++++++--------- .../media/platform/qcom/iris/iris_firmware.c | 9 ++++--- drivers/media/platform/qcom/venus/Kconfig | 1 + drivers/media/platform/qcom/venus/firmware.c | 11 ++++---- 4 files changed, 26 insertions(+), 22 deletions(-)

diff --git a/drivers/media/platform/qcom/iris/Kconfig b/drivers/media/platform/qcom/iris/Kconfig index af78a1775937..388c9bbc8136 100644 --- a/drivers/media/platform/qcom/iris/Kconfig +++ b/drivers/media/platform/qcom/iris/Kconfig @@ -1,14 +1,15 @@ config VIDEO_QCOM_IRIS - tristate "Qualcomm iris V4L2 decoder driver" - depends on VIDEO_DEV - depends on ARCH_QCOM || COMPILE_TEST - select V4L2_MEM2MEM_DEV - select QCOM_MDT_LOADER - select QCOM_SCM - select QCOM_UBWC_CONFIG - select VIDEOBUF2_DMA_CONTIG - help - This is a V4L2 driver for Qualcomm iris video accelerator - hardware. It accelerates decoding operations on various - Qualcomm SoCs. - To compile this driver as a module choose m here. + tristate "Qualcomm iris V4L2 decoder driver" + depends on VIDEO_DEV + depends on ARCH_QCOM || COMPILE_TEST + select V4L2_MEM2MEM_DEV + select QCOM_MDT_LOADER + select QCOM_SCM + select QCOM_PAS + select QCOM_UBWC_CONFIG + select VIDEOBUF2_DMA_CONTIG + help + This is a V4L2 driver for Qualcomm iris video accelerator + hardware. It accelerates decoding operations on various + Qualcomm SoCs. + To compile this driver as a module choose m here. diff --git a/drivers/media/platform/qcom/iris/iris_firmware.c b/drivers/media/platform/qcom/iris/iris_firmware.c index 1a476146d758..ea9654dd679e 100644 --- a/drivers/media/platform/qcom/iris/iris_firmware.c +++ b/drivers/media/platform/qcom/iris/iris_firmware.c @@ -4,6 +4,7 @@ */

#include <linux/firmware.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/firmware/qcom/qcom_scm.h> #include <linux/of_address.h> #include <linux/of_reserved_mem.h> @@ -80,7 +81,7 @@ int iris_fw_load(struct iris_core *core) return -ENOMEM; }

- ret = qcom_scm_pas_auth_and_reset(IRIS_PAS_ID); + ret = qcom_pas_auth_and_reset(IRIS_PAS_ID); if (ret) { dev_err(core->dev, "auth and reset failed: %d\n", ret); return ret; @@ -94,7 +95,7 @@ int iris_fw_load(struct iris_core *core) cp_config->cp_nonpixel_size); if (ret) { dev_err(core->dev, "qcom_scm_mem_protect_video_var failed: %d\n", ret); - qcom_scm_pas_shutdown(IRIS_PAS_ID); + qcom_pas_shutdown(IRIS_PAS_ID); return ret; } } @@ -104,10 +105,10 @@ int iris_fw_load(struct iris_core *core)

int iris_fw_unload(struct iris_core *core) { - return qcom_scm_pas_shutdown(IRIS_PAS_ID); + return qcom_pas_shutdown(IRIS_PAS_ID); }

int iris_set_hw_state(struct iris_core *core, bool resume) { - return qcom_scm_set_remote_state(resume, 0); + return qcom_pas_set_remote_state(resume, 0); } diff --git a/drivers/media/platform/qcom/venus/Kconfig b/drivers/media/platform/qcom/venus/Kconfig index 63ee8c78dc6d..7997b8aa427a 100644 --- a/drivers/media/platform/qcom/venus/Kconfig +++ b/drivers/media/platform/qcom/venus/Kconfig @@ -6,6 +6,7 @@ config VIDEO_QCOM_VENUS select OF_DYNAMIC if ARCH_QCOM select QCOM_MDT_LOADER select QCOM_SCM + select QCOM_PAS select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c index 1de7436713ed..3a38ff985822 100644 --- a/drivers/media/platform/qcom/venus/firmware.c +++ b/drivers/media/platform/qcom/venus/firmware.c @@ -12,6 +12,7 @@ #include <linux/of_reserved_mem.h> #include <linux/platform_device.h> #include <linux/of_device.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/firmware/qcom/qcom_scm.h> #include <linux/sizes.h> #include <linux/soc/qcom/mdt_loader.h> @@ -58,7 +59,7 @@ int venus_set_hw_state(struct venus_core *core, bool resume) int ret;

if (core->use_tz) { - ret = qcom_scm_set_remote_state(resume, 0); + ret = qcom_pas_set_remote_state(resume, 0); if (resume && ret == -EINVAL) ret = 0; return ret; @@ -218,7 +219,7 @@ int venus_boot(struct venus_core *core) int ret;

if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || - (core->use_tz && !qcom_scm_is_available())) + (core->use_tz && !qcom_pas_is_available())) return -EPROBE_DEFER;

ret = of_property_read_string_index(dev->of_node, "firmware-name", 0, @@ -236,7 +237,7 @@ int venus_boot(struct venus_core *core) core->fw.mem_phys = mem_phys;

if (core->use_tz) - ret = qcom_scm_pas_auth_and_reset(VENUS_PAS_ID); + ret = qcom_pas_auth_and_reset(VENUS_PAS_ID); else ret = venus_boot_no_tz(core, mem_phys, mem_size);

@@ -259,7 +260,7 @@ int venus_boot(struct venus_core *core) res->cp_nonpixel_start, res->cp_nonpixel_size); if (ret) { - qcom_scm_pas_shutdown(VENUS_PAS_ID); + qcom_pas_shutdown(VENUS_PAS_ID); dev_err(dev, "set virtual address ranges fail (%d)\n", ret); return ret; @@ -274,7 +275,7 @@ int venus_shutdown(struct venus_core *core) int ret;

if (core->use_tz) - ret = qcom_scm_pas_shutdown(VENUS_PAS_ID); + ret = qcom_pas_shutdown(VENUS_PAS_ID); else ret = venus_shutdown_no_tz(core);

From: Sumit Garg sumit.garg@oss.qualcomm.com

Switch ath12k client driver over to generic PAS TZ APIs. Generic PAS TZ service allows to support multiple TZ implementation backends like QTEE based SCM PAS service, OP-TEE based PAS service and any further future TZ backend service.

Acked-by: Jeff Johnson jjohnson@kernel.org Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/net/wireless/ath/ath12k/Kconfig | 2 +- drivers/net/wireless/ath/ath12k/ahb.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/Kconfig b/drivers/net/wireless/ath/ath12k/Kconfig index 4a2b240f967a..0d5d1c55bfc1 100644 --- a/drivers/net/wireless/ath/ath12k/Kconfig +++ b/drivers/net/wireless/ath/ath12k/Kconfig @@ -18,7 +18,7 @@ config ATH12K_AHB bool "Qualcomm ath12k AHB support" depends on ATH12K && REMOTEPROC select QCOM_MDT_LOADER - select QCOM_SCM + select QCOM_PAS help Enable support for Ath12k AHB bus chipsets, example IPQ5332.

diff --git a/drivers/net/wireless/ath/ath12k/ahb.c b/drivers/net/wireless/ath/ath12k/ahb.c index 30733a244454..69e21214e629 100644 --- a/drivers/net/wireless/ath/ath12k/ahb.c +++ b/drivers/net/wireless/ath/ath12k/ahb.c @@ -5,7 +5,7 @@ */

#include <linux/dma-mapping.h> -#include <linux/firmware/qcom/qcom_scm.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> @@ -420,7 +420,7 @@ static int ath12k_ahb_power_up(struct ath12k_base *ab)

if (ab_ahb->scm_auth_enabled) { /* Authenticate FW image using peripheral ID */ - ret = qcom_scm_pas_auth_and_reset(pasid); + ret = qcom_pas_auth_and_reset(pasid); if (ret) { ath12k_err(ab, "failed to boot the remote processor %d\n", ret); goto err_fw2; @@ -485,10 +485,10 @@ static void ath12k_ahb_power_down(struct ath12k_base *ab, bool is_suspend) pasid = (u32_encode_bits(ab_ahb->userpd_id, ATH12K_USERPD_ID_MASK)) | ATH12K_AHB_UPD_SWID; /* Release the firmware */ - ret = qcom_scm_pas_shutdown(pasid); + ret = qcom_pas_shutdown(pasid); if (ret) - ath12k_err(ab, "scm pas shutdown failed for userPD%d\n", - ab_ahb->userpd_id); + ath12k_err(ab, "PAS shutdown failed for userPD%d: %d\n", + ab_ahb->userpd_id, ret); } }

From: Sumit Garg sumit.garg@oss.qualcomm.com

Now since all the Qcom SCM client drivers have been migrated over to generic PAS TZ service, let's drop the exported SCM PAS wrappers.

Reviewed-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com Tested-by: Mukesh Ojha mukesh.ojha@oss.qualcomm.com # Lemans Tested-by: Vignesh Viswanathan vignesh.viswanathan@oss.qualcomm.com # IPQ9650 Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/firmware/qcom/qcom_scm.c | 143 +++++-------------------- include/linux/firmware/qcom/qcom_scm.h | 29 ----- 2 files changed, 29 insertions(+), 143 deletions(-)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 7933e55803dc..1deee6aea387 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -553,26 +553,6 @@ static void qcom_scm_set_download_mode(u32 dload_mode) dev_err(__scm->dev, "failed to set download mode: %d\n", ret); }

-struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev, - u32 pas_id, - phys_addr_t mem_phys, - size_t mem_size) -{ - struct qcom_pas_context *ctx; - - ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); - if (!ctx) - return ERR_PTR(-ENOMEM); - - ctx->dev = dev; - ctx->pas_id = pas_id; - ctx->mem_phys = mem_phys; - ctx->mem_size = mem_size; - - return (struct qcom_scm_pas_context *)ctx; -} -EXPORT_SYMBOL_GPL(devm_qcom_scm_pas_context_alloc); - static int __qcom_scm_pas_init_image(struct device *dev, u32 pas_id, dma_addr_t mdata_phys, struct qcom_scm_res *res) @@ -630,9 +610,9 @@ static int qcom_scm_pas_prep_and_init_image(struct device *dev, return ret ? : res.result[0]; }

-static int __qcom_scm_pas_init_image2(struct device *dev, u32 pas_id, - const void *metadata, size_t size, - struct qcom_pas_context *ctx) +static int qcom_scm_pas_init_image(struct device *dev, u32 pas_id, + const void *metadata, size_t size, + struct qcom_pas_context *ctx) { struct qcom_scm_res res; dma_addr_t mdata_phys; @@ -672,16 +652,8 @@ static int __qcom_scm_pas_init_image2(struct device *dev, u32 pas_id, return ret ? : res.result[0]; }

-int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, - struct qcom_scm_pas_context *ctx) -{ - return __qcom_scm_pas_init_image2(__scm->dev, pas_id, metadata, size, - (struct qcom_pas_context *)ctx); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image); - -static void __qcom_scm_pas_metadata_release(struct device *dev, - struct qcom_pas_context *ctx) +static void qcom_scm_pas_metadata_release(struct device *dev, + struct qcom_pas_context *ctx) { if (ctx->use_tzmem) qcom_tzmem_free(ctx->ptr); @@ -691,15 +663,8 @@ static void __qcom_scm_pas_metadata_release(struct device *dev, ctx->ptr = NULL; }

-void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx) -{ - __qcom_scm_pas_metadata_release(__scm->dev, - (struct qcom_pas_context *)ctx); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_metadata_release); - -static int __qcom_scm_pas_mem_setup(struct device *dev, u32 pas_id, - phys_addr_t addr, phys_addr_t size) +static int qcom_scm_pas_mem_setup(struct device *dev, u32 pas_id, + phys_addr_t addr, phys_addr_t size) { int ret; struct qcom_scm_desc desc = { @@ -730,12 +695,6 @@ static int __qcom_scm_pas_mem_setup(struct device *dev, u32 pas_id, return ret ? : res.result[0]; }

-int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size) -{ - return __qcom_scm_pas_mem_setup(__scm->dev, pas_id, addr, size); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_mem_setup); - static void *__qcom_scm_pas_get_rsc_table(struct device *dev, u32 pas_id, void *input_rt_tzm, size_t input_rt_size, @@ -789,11 +748,10 @@ static void *__qcom_scm_pas_get_rsc_table(struct device *dev, u32 pas_id, return ret ? ERR_PTR(ret) : output_rt_tzm; }

-static void *__qcom_scm_pas_get_rsc_table2(struct device *dev, - struct qcom_pas_context *ctx, - void *input_rt, - size_t input_rt_size, - size_t *output_rt_size) +static void *qcom_scm_pas_get_rsc_table(struct device *dev, + struct qcom_pas_context *ctx, + void *input_rt, size_t input_rt_size, + size_t *output_rt_size) { struct resource_table empty_rsc = {}; size_t size = SZ_16K; @@ -864,19 +822,7 @@ static void *__qcom_scm_pas_get_rsc_table2(struct device *dev, return ret ? ERR_PTR(ret) : tbl_ptr; }

-struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx, - void *input_rt, - size_t input_rt_size, - size_t *output_rt_size) -{ - return __qcom_scm_pas_get_rsc_table2(__scm->dev, - (struct qcom_pas_context *)ctx, - input_rt, input_rt_size, - output_rt_size); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_get_rsc_table); - -static int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 pas_id) +static int qcom_scm_pas_auth_and_reset(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -905,14 +851,8 @@ static int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 pas_id) return ret ? : res.result[0]; }

-int qcom_scm_pas_auth_and_reset(u32 pas_id) -{ - return __qcom_scm_pas_auth_and_reset(__scm->dev, pas_id); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset); - -static int __qcom_scm_pas_prepare_and_auth_reset(struct device *dev, - struct qcom_pas_context *ctx) +static int qcom_scm_pas_prepare_and_auth_reset(struct device *dev, + struct qcom_pas_context *ctx) { u64 handle; int ret; @@ -923,7 +863,7 @@ static int __qcom_scm_pas_prepare_and_auth_reset(struct device *dev, * memory region and then invokes a call to TrustZone to authenticate. */ if (!ctx->use_tzmem) - return __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id); + return qcom_scm_pas_auth_and_reset(dev, ctx->pas_id);

/* * When Linux runs @ EL2 Linux must create the shmbridge itself and then @@ -933,21 +873,14 @@ static int __qcom_scm_pas_prepare_and_auth_reset(struct device *dev, if (ret) return ret;

- ret = __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id); + ret = qcom_scm_pas_auth_and_reset(dev, ctx->pas_id); qcom_tzmem_shm_bridge_delete(handle);

return ret; }

-int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) -{ - return __qcom_scm_pas_prepare_and_auth_reset(__scm->dev, - (struct qcom_pas_context *)ctx); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_prepare_and_auth_reset); - -static int __qcom_scm_pas_set_remote_state(struct device *dev, u32 state, - u32 pas_id) +static int qcom_scm_pas_set_remote_state(struct device *dev, u32 state, + u32 pas_id) { struct qcom_scm_desc desc = { .svc = QCOM_SCM_SVC_BOOT, @@ -965,13 +898,7 @@ static int __qcom_scm_pas_set_remote_state(struct device *dev, u32 state, return ret ? : res.result[0]; }

-int qcom_scm_set_remote_state(u32 state, u32 id) -{ - return __qcom_scm_pas_set_remote_state(__scm->dev, state, id); -} -EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state); - -static int __qcom_scm_pas_shutdown(struct device *dev, u32 pas_id) +static int qcom_scm_pas_shutdown(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -1000,13 +927,7 @@ static int __qcom_scm_pas_shutdown(struct device *dev, u32 pas_id) return ret ? : res.result[0]; }

-int qcom_scm_pas_shutdown(u32 pas_id) -{ - return __qcom_scm_pas_shutdown(__scm->dev, pas_id); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_shutdown); - -static bool __qcom_scm_pas_supported(struct device *dev, u32 pas_id) +static bool qcom_scm_pas_supported(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -1027,23 +948,17 @@ static bool __qcom_scm_pas_supported(struct device *dev, u32 pas_id) return ret ? false : !!res.result[0]; }

-bool qcom_scm_pas_supported(u32 pas_id) -{ - return __qcom_scm_pas_supported(__scm->dev, pas_id); -} -EXPORT_SYMBOL_GPL(qcom_scm_pas_supported); - static struct qcom_pas_ops qcom_pas_ops_scm = { .drv_name = "qcom_scm", - .supported = __qcom_scm_pas_supported, - .init_image = __qcom_scm_pas_init_image2, - .mem_setup = __qcom_scm_pas_mem_setup, - .get_rsc_table = __qcom_scm_pas_get_rsc_table2, - .auth_and_reset = __qcom_scm_pas_auth_and_reset, - .prepare_and_auth_reset = __qcom_scm_pas_prepare_and_auth_reset, - .set_remote_state = __qcom_scm_pas_set_remote_state, - .shutdown = __qcom_scm_pas_shutdown, - .metadata_release = __qcom_scm_pas_metadata_release, + .supported = qcom_scm_pas_supported, + .init_image = qcom_scm_pas_init_image, + .mem_setup = qcom_scm_pas_mem_setup, + .get_rsc_table = qcom_scm_pas_get_rsc_table, + .auth_and_reset = qcom_scm_pas_auth_and_reset, + .prepare_and_auth_reset = qcom_scm_pas_prepare_and_auth_reset, + .set_remote_state = qcom_scm_pas_set_remote_state, + .shutdown = qcom_scm_pas_shutdown, + .metadata_release = qcom_scm_pas_metadata_release, };

/** diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h index 5747bd191bf1..a0a6bc0229c4 100644 --- a/include/linux/firmware/qcom/qcom_scm.h +++ b/include/linux/firmware/qcom/qcom_scm.h @@ -64,35 +64,6 @@ bool qcom_scm_is_available(void); int qcom_scm_set_cold_boot_addr(void *entry); int qcom_scm_set_warm_boot_addr(void *entry); void qcom_scm_cpu_power_down(u32 flags); -int qcom_scm_set_remote_state(u32 state, u32 id); - -struct qcom_scm_pas_context { - struct device *dev; - u32 pas_id; - phys_addr_t mem_phys; - size_t mem_size; - void *ptr; - dma_addr_t phys; - ssize_t size; - bool use_tzmem; -}; - -struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev, - u32 pas_id, - phys_addr_t mem_phys, - size_t mem_size); -int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, - struct qcom_scm_pas_context *ctx); -void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx); -int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size); -int qcom_scm_pas_auth_and_reset(u32 pas_id); -int qcom_scm_pas_shutdown(u32 pas_id); -bool qcom_scm_pas_supported(u32 pas_id); -struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx, - void *input_rt, size_t input_rt_size, - size_t *output_rt_size); - -int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx);

int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val); int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);