Hi,
This patch set introduces a new RPMB subsystem, based on patches from [1], [2], and [3]. The RPMB subsystem aims at providing access to RPMB partitions to other kernel drivers, in particular the OP-TEE driver. A new user space ABI isn't needed, we can instead continue using the already present ABI when writing the RPMB key during production.
I've added and removed things to keep only what is needed by the OP-TEE driver. Since the posting of [3], there has been major changes in the MMC subsystem so "mmc: block: register RPMB partition with the RPMB subsystem" is in practice completely rewritten.
With this OP-TEE can access RPMB during early boot instead of having to wait for user space to become available as in the current design [4]. This will benefit the efi variables [5] since we wont rely on userspace as well as some TPM issues [6] that were solved.
The OP-TEE driver finds the correct RPMB device to interact with by iterating over available devices until one is found with a programmed authentication matching the one OP-TEE is using. This enables coexisting users of other RPMBs since the owner can be determined by who knows the authentication key.
The corresponding secure world OP-TEE patches are available at [7].
I've put myself as a maintainer for the RPMB subsystem as I have an interest in the OP-TEE driver to keep this in good shape. However, if you'd rather see someone else taking the maintainership that's fine too. I'll help keep the subsystem updated regardless.
[1] https://lore.kernel.org/lkml/20230722014037.42647-1-shyamsaini@linux.microso... [2] https://lore.kernel.org/lkml/20220405093759.1126835-2-alex.bennee@linaro.org... [3] https://lore.kernel.org/linux-mmc/1478548394-8184-2-git-send-email-tomas.win... [4] https://optee.readthedocs.io/en/latest/architecture/secure_storage.html#rpmb... [5] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... [6] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... [7] https://github.com/jenswi-linaro/optee_os/tree/rpmb_probe_v6
Thanks, Jens
Changes since v5: Manuel Traut reported and investigated an error on an i.MX8MM, the root cause was identified as insufficient alignment on frames sent to the RPMB device. Fixed in the OP-TEE driver as described below. * "rpmb: add Replay Protected Memory Block (RPMB) subsystem" - Adding a missing EXPORT_SYMBOL_GPL() * "optee: probe RPMB device using RPMB subsystem" - Replacing the old OPTEE_RPC_CMD_RPMB ABI with OPTEE_RPC_CMD_RPMB_FRAMES to get rid of the small header struct rpmb_req (now removed) causing the problem. - Matching changes on the secure side + support for re-initializing RPMB in case a boot stage has used RPMB, the latter also reported by Manuel Traut.
Changes since v4: * "rpmb: add Replay Protected Memory Block (RPMB) subsystem" - Describing struct rpmb_descr as RPMB description instead of descriptor * "mmc: block: register RPMB partition with the RPMB subsystem" - Addressing review comments - Adding more comments for struct rpmb_frame - Fixing assignment of reliable_wr_count and capacity in mmc_blk_rpmb_add() * "optee: probe RPMB device using RPMB subsystem" - Updating struct rpmb_dev_info to match changes in "rpmb: add Replay Protected Memory Block (RPMB) subsystem"
Changes since v3: * Move struct rpmb_frame into the MMC driver since the format of the RPMB frames depend on the implementation, one format for eMMC, another for UFS, and so on * "rpmb: add Replay Protected Memory Block (RPMB) subsystem" - Adding Reviewed-by: Linus Walleij linus.walleij@linaro.org - Adding more description of the API functions - Removing the set_dev_info() op from struct rpmb_ops, the needed information is supplied in the arguments to rpmb_dev_register() instead. - Getting rid of struct rpmb_ops since only the route_frames() op was remaining, store that op directly in struct rpmb_dev - Changed rpmb_interface_register() and rpmb_interface_unregister() to use notifier_block instead of implementing the same thing ourselves * "mmc: block: register RPMB partition with the RPMB subsystem" - Moving the call to rpmb_dev_register() to be done at the end of mmc_blk_probe() when the device is fully available * "optee: probe RPMB device using RPMB subsystem" - Use IS_REACHABLE(CONFIG_RPMB) to determine if the RPMB subsystem is available - Translate TEE_ERROR_STORAGE_NOT_AVAILABLE if encountered in get_devices() to recognize the error in optee_rpmb_scan() - Simplified optee_rpmb_scan() and optee_rpmb_intf_rdev()
Changes since v2: * "rpmb: add Replay Protected Memory Block (RPMB) subsystem" - Fixing documentation issues - Adding a "depends on MMC" in the Kconfig - Removed the class-device and the embedded device, struct rpmb_dev now relies on the parent device for reference counting as requested - Removed the now unneeded rpmb_ops get_resources() and put_resources() since references are already taken in mmc_blk_alloc_rpmb_part() before rpmb_dev_register() is called - Added rpmb_interface_{,un}register() now that class_interface_{,un}register() can't be used ay longer * "mmc: block: register RPMB partition with the RPMB subsystem" - Adding the missing error cleanup in alloc_idata() - Taking the needed reference to md->disk in mmc_blk_alloc_rpmb_part() instead of in mmc_rpmb_chrdev_open() and rpmb_op_mmc_get_resources() * "optee: probe RPMB device using RPMB subsystem" - Registering to get a notification when an RPMB device comes online - Probes for RPMB devices each time an RPMB device comes online, until a usable device is found - When a usable RPMB device is found, call optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB) - Pass type of rpmb in return value from OPTEE_RPC_CMD_RPMB_PROBE_NEXT
Changes since Shyam's RFC: * Removed the remaining leftover rpmb_cdev_*() function calls * Refactored the struct rpmb_ops with all the previous ops replaced, in some sense closer to [3] with the route_frames() op * Added rpmb_route_frames() * Added struct rpmb_frame, enum rpmb_op_result, and enum rpmb_type from [3] * Removed all functions not needed in the OP-TEE use case * Added "mmc: block: register RPMB partition with the RPMB subsystem", based on the commit with the same name in [3] * Added "optee: probe RPMB device using RPMB subsystem" for integration with OP-TEE * Moved the RPMB driver into drivers/misc/rpmb-core.c * Added my name to MODULE_AUTHOR() in rpmb-core.c * Added an rpmb_mutex to serialize access to the IDA * Removed the target parameter from all rpmb_*() functions since it's currently unused
Jens Wiklander (3): rpmb: add Replay Protected Memory Block (RPMB) subsystem mmc: block: register RPMB partition with the RPMB subsystem optee: probe RPMB device using RPMB subsystem
MAINTAINERS | 7 + drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++ drivers/mmc/core/block.c | 241 +++++++++++++++++++++++++++++- drivers/tee/optee/core.c | 30 ++++ drivers/tee/optee/device.c | 7 + drivers/tee/optee/ffa_abi.c | 8 + drivers/tee/optee/optee_private.h | 21 ++- drivers/tee/optee/optee_rpc_cmd.h | 35 +++++ drivers/tee/optee/rpc.c | 166 ++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 7 + include/linux/rpmb.h | 136 +++++++++++++++++ 13 files changed, 899 insertions(+), 3 deletions(-) create mode 100644 drivers/misc/rpmb-core.c create mode 100644 include/linux/rpmb.h
A number of storage technologies support a specialised hardware partition designed to be resistant to replay attacks. The underlying HW protocols differ but the operations are common. The RPMB partition cannot be accessed via standard block layer, but by a set of specific RPMB commands. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver interface which can be accessed by the optee driver to facilitate early RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver provides a callback to route RPMB frames to the RPMB device accessible via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE device driver itself.
Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Alex Bennée alex.bennee@linaro.org Signed-off-by: Shyam Saini shyamsaini@linux.microsoft.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Reviewed-by: Linus Walleij linus.walleij@linaro.org --- MAINTAINERS | 7 ++ drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++++++++++++ include/linux/rpmb.h | 136 +++++++++++++++++++++++ 5 files changed, 387 insertions(+) create mode 100644 drivers/misc/rpmb-core.c create mode 100644 include/linux/rpmb.h
diff --git a/MAINTAINERS b/MAINTAINERS index 8999497011a2..e83152c42499 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19012,6 +19012,13 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml F: drivers/media/platform/sunxi/sun8i-rotate/
+RPMB SUBSYSTEM +M: Jens Wiklander jens.wiklander@linaro.org +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/misc/rpmb-core.c +F: include/linux/rpmb.h + RPMSG TTY DRIVER M: Arnaud Pouliquen arnaud.pouliquen@foss.st.com L: linux-remoteproc@vger.kernel.org diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4fb291f0bf7c..dbff9e8c3a03 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -104,6 +104,16 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here.
+config RPMB + tristate "RPMB partition interface" + depends on MMC + help + Unified RPMB unit interface for RPMB capable devices such as eMMC and + UFS. Provides interface for in-kernel security controllers to access + RPMB unit. + + If unsure, select N. + config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index ea6ea5bbbc9c..8af058ad1df4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_LKDTM) += lkdtm/ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_RPMB) += rpmb-core.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o diff --git a/drivers/misc/rpmb-core.c b/drivers/misc/rpmb-core.c new file mode 100644 index 000000000000..e42a45debc76 --- /dev/null +++ b/drivers/misc/rpmb-core.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(c) 2015 - 2019 Intel Corporation. All rights reserved. + * Copyright(c) 2021 - 2024 Linaro Ltd. + */ +#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/rpmb.h> +#include <linux/slab.h> + +static struct list_head rpmb_dev_list; +static DEFINE_MUTEX(rpmb_mutex); +static struct blocking_notifier_head rpmb_interface = + BLOCKING_NOTIFIER_INIT(rpmb_interface); + +/** + * rpmb_dev_get() - increase rpmb device ref counter + * @rdev: rpmb device + */ +struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev) +{ + if (rdev) + get_device(rdev->parent_dev); + return rdev; +} +EXPORT_SYMBOL_GPL(rpmb_dev_get); + +/** + * rpmb_dev_put() - decrease rpmb device ref counter + * @rdev: rpmb device + */ +void rpmb_dev_put(struct rpmb_dev *rdev) +{ + if (rdev) + put_device(rdev->parent_dev); +} +EXPORT_SYMBOL_GPL(rpmb_dev_put); + +/** + * rpmb_route_frames() - route rpmb frames to rpmb device + * @rdev: rpmb device + * @req: rpmb request frames + * @req_len: length of rpmb request frames in bytes + * @rsp: rpmb response frames + * @rsp_len: length of rpmb response frames in bytes + * + * Returns: < 0 on failure + */ +int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req, + unsigned int req_len, u8 *rsp, unsigned int rsp_len) +{ + if (!req || !req_len || !rsp || !rsp_len) + return -EINVAL; + + return rdev->descr.route_frames(rdev->parent_dev, req, req_len, + rsp, rsp_len); +} +EXPORT_SYMBOL_GPL(rpmb_route_frames); + +/** + * rpmb_dev_find_device() - return first matching rpmb device + * @data: data for the match function + * @match: the matching function + * + * Iterate over registered RPMB devices, and call @match() for each passing + * it the RPMB device and @data. + * + * The return value of @match() is checked for each call. If it returns + * anything other 0, break and return the found RPMB device. + * + * It's the callers responsibility to call rpmb_dev_put() on the returned + * device, when it's done with it. + * + * Returns: a matching rpmb device or NULL on failure + */ +struct rpmb_dev *rpmb_dev_find_device(const void *data, + const struct rpmb_dev *start, + int (*match)(struct rpmb_dev *rdev, + const void *data)) +{ + struct rpmb_dev *rdev; + struct list_head *pos; + + mutex_lock(&rpmb_mutex); + if (start) + pos = start->list_node.next; + else + pos = rpmb_dev_list.next; + + while (pos != &rpmb_dev_list) { + rdev = container_of(pos, struct rpmb_dev, list_node); + if (match(rdev, data)) { + rpmb_dev_get(rdev); + goto out; + } + pos = pos->next; + } + rdev = NULL; + +out: + mutex_unlock(&rpmb_mutex); + + return rdev; +} +EXPORT_SYMBOL_GPL(rpmb_dev_find_device); + +/** + * rpmb_dev_unregister() - unregister RPMB partition from the RPMB subsystem + * @rdev: the rpmb device to unregister + * + * This function should be called from the release function of the + * underlying device used when the RPMB device was registered. + * + * Returns: < 0 on failure + */ +int rpmb_dev_unregister(struct rpmb_dev *rdev) +{ + if (!rdev) + return -EINVAL; + + mutex_lock(&rpmb_mutex); + list_del(&rdev->list_node); + mutex_unlock(&rpmb_mutex); + kfree(rdev->descr.dev_id); + kfree(rdev); + + return 0; +} +EXPORT_SYMBOL_GPL(rpmb_dev_unregister); + +/** + * rpmb_dev_register - register RPMB partition with the RPMB subsystem + * @dev: storage device of the rpmb device + * @ops: device specific operations + * + * While registering the RPMB partition extract needed device information + * while needed resources are available. + * + * Returns: a pointer to a 'struct rpmb_dev' or an ERR_PTR on failure + */ +struct rpmb_dev *rpmb_dev_register(struct device *dev, + struct rpmb_descr *descr) +{ + struct rpmb_dev *rdev; + + if (!dev || !descr || !descr->route_frames || !descr->dev_id || + !descr->dev_id_len) + return ERR_PTR(-EINVAL); + + rdev = kzalloc(sizeof(*rdev), GFP_KERNEL); + if (!rdev) + return ERR_PTR(-ENOMEM); + rdev->descr = *descr; + rdev->descr.dev_id = kmemdup(descr->dev_id, descr->dev_id_len, + GFP_KERNEL); + if (!rdev->descr.dev_id) { + kfree(rdev); + return ERR_PTR(-ENOMEM); + } + + rdev->parent_dev = dev; + + dev_dbg(rdev->parent_dev, "registered device\n"); + + mutex_lock(&rpmb_mutex); + list_add_tail(&rdev->list_node, &rpmb_dev_list); + blocking_notifier_call_chain(&rpmb_interface, RPMB_NOTIFY_ADD_DEVICE, + rdev); + mutex_unlock(&rpmb_mutex); + + return rdev; +} +EXPORT_SYMBOL_GPL(rpmb_dev_register); + +/** + * rpmb_interface_register() - register for new device notifications + * + * @nb : New entry in notifier chain + * + * Returns: 0 on success -EEXIST on error. + */ +int rpmb_interface_register(struct notifier_block *nb) +{ + struct rpmb_dev *rdev; + int ret; + + ret = blocking_notifier_chain_register(&rpmb_interface, nb); + if (ret) + return ret; + + mutex_lock(&rpmb_mutex); + list_for_each_entry(rdev, &rpmb_dev_list, list_node) + nb->notifier_call(nb, RPMB_NOTIFY_ADD_DEVICE, rdev); + mutex_unlock(&rpmb_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(rpmb_interface_register); + +/** + * rpmb_interface_unregister() - unregister from new device notifications + * + * @nb : Entry to remove from notifier chain + * + * Returns: 0 on success or -ENOENT on failure. + */ +int rpmb_interface_unregister(struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&rpmb_interface, nb); +} +EXPORT_SYMBOL_GPL(rpmb_interface_unregister); + +static int __init rpmb_init(void) +{ + INIT_LIST_HEAD(&rpmb_dev_list); + return 0; +} + +static void __exit rpmb_exit(void) +{ + mutex_destroy(&rpmb_mutex); +} + +subsys_initcall(rpmb_init); +module_exit(rpmb_exit); + +MODULE_AUTHOR("Jens Wiklander jens.wiklander@linaro.org"); +MODULE_DESCRIPTION("RPMB class"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/rpmb.h b/include/linux/rpmb.h new file mode 100644 index 000000000000..3ced206fdc17 --- /dev/null +++ b/include/linux/rpmb.h @@ -0,0 +1,136 @@ +/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */ +/* + * Copyright (C) 2015-2019 Intel Corp. All rights reserved + * Copyright (C) 2021-2022 Linaro Ltd + */ +#ifndef __RPMB_H__ +#define __RPMB_H__ + +#include <linux/types.h> +#include <linux/device.h> +#include <linux/notifier.h> + +/** + * enum rpmb_type - type of underlying storage technology + * + * @RPMB_TYPE_EMMC : emmc (JESD84-B50.1) + * @RPMB_TYPE_UFS : UFS (JESD220) + * @RPMB_TYPE_NVME : NVM Express + */ +enum rpmb_type { + RPMB_TYPE_EMMC, + RPMB_TYPE_UFS, + RPMB_TYPE_NVME, +}; + +/** + * struct rpmb_descr - RPMB description provided by the underlying block device + * + * @type : block device type + * @route_frames : routes frames to and from the RPMB device + * @dev_id : unique device identifier read from the hardware + * @dev_id_len : length of unique device identifier + * @reliable_wr_count: number of sectors that can be written in one access + * @capacity : capacity of the device in units of 128K + * + * @dev_id is intended to be used as input when deriving the authenticaion key. + */ +struct rpmb_descr { + enum rpmb_type type; + int (*route_frames)(struct device *dev, u8 *req, unsigned int req_len, + u8 *resp, unsigned int resp_len); + u8 *dev_id; + size_t dev_id_len; + u16 reliable_wr_count; + u16 capacity; +}; + +/** + * struct rpmb_dev - device which can support RPMB partition + * + * @parent_dev : parent device + * @list_node : linked list node + * @descr : RPMB description + */ +struct rpmb_dev { + struct device *parent_dev; + struct list_head list_node; + struct rpmb_descr descr; +}; + +enum rpmb_interface_action { + RPMB_NOTIFY_ADD_DEVICE, +}; + +/** + * struct rpmb_interface - subscribe to new RPMB devices + * + * @list_node : linked list node + * @add_rdev : notifies that a new RPMB device has been found + */ +struct rpmb_interface { + struct list_head list_node; + void (*add_rdev)(struct rpmb_interface *intf, struct rpmb_dev *rdev); +}; + +#if IS_ENABLED(CONFIG_RPMB) +struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev); +void rpmb_dev_put(struct rpmb_dev *rdev); +struct rpmb_dev *rpmb_dev_find_device(const void *data, + const struct rpmb_dev *start, + int (*match)(struct rpmb_dev *rdev, + const void *data)); +struct rpmb_dev *rpmb_dev_register(struct device *dev, + struct rpmb_descr *descr); +int rpmb_dev_unregister(struct rpmb_dev *rdev); + +int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req, + unsigned int req_len, u8 *resp, unsigned int resp_len); + +int rpmb_interface_register(struct notifier_block *nb); +int rpmb_interface_unregister(struct notifier_block *nb); +#else +static inline struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev) +{ + return NULL; +} + +static inline void rpmb_dev_put(struct rpmb_dev *rdev) { } + +static inline struct rpmb_dev * +rpmb_dev_find_device(const void *data, const struct rpmb_dev *start, + int (*match)(struct rpmb_dev *rdev, const void *data)) +{ + return NULL; +} + +static inline struct rpmb_dev * +rpmb_dev_register(struct device *dev, const struct rpmb_ops *ops) +{ + return NULL; +} + +static inline int rpmb_dev_unregister(struct rpmb_dev *dev) +{ + return 0; +} + +static inline int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req, + unsigned int req_len, u8 *resp, + unsigned int resp_len) +{ + return -EOPNOTSUPP; +} + +static inline int rpmb_interface_register(struct notifier_block *nb) +{ + return -EOPNOTSUPP; +} + +static inline int rpmb_interface_unregister(struct notifier_block *nb) +{ + return -EOPNOTSUPP; +} +#endif /* CONFIG_RPMB */ + +#endif /* __RPMB_H__ */
On Tue, May 07, 2024 at 11:16:17AM +0200, Jens Wiklander wrote:
A number of storage technologies support a specialised hardware partition designed to be resistant to replay attacks. The underlying HW protocols differ but the operations are common. The RPMB partition cannot be accessed via standard block layer, but by a set of specific RPMB commands. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver interface which can be accessed by the optee driver to facilitate early RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver provides a callback to route RPMB frames to the RPMB device accessible via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE device driver itself.
Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Alex Bennée alex.bennee@linaro.org Signed-off-by: Shyam Saini shyamsaini@linux.microsoft.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Reviewed-by: Linus Walleij linus.walleij@linaro.org
Tested-by: Manuel Traut manut@mecka.net
MAINTAINERS | 7 ++ drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++++++++++++ include/linux/rpmb.h | 136 +++++++++++++++++++++++ 5 files changed, 387 insertions(+) create mode 100644 drivers/misc/rpmb-core.c create mode 100644 include/linux/rpmb.h
diff --git a/MAINTAINERS b/MAINTAINERS index 8999497011a2..e83152c42499 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19012,6 +19012,13 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml F: drivers/media/platform/sunxi/sun8i-rotate/ +RPMB SUBSYSTEM +M: Jens Wiklander jens.wiklander@linaro.org +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/misc/rpmb-core.c +F: include/linux/rpmb.h
RPMSG TTY DRIVER M: Arnaud Pouliquen arnaud.pouliquen@foss.st.com L: linux-remoteproc@vger.kernel.org diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4fb291f0bf7c..dbff9e8c3a03 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -104,6 +104,16 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here. +config RPMB
- tristate "RPMB partition interface"
- depends on MMC
- help
Unified RPMB unit interface for RPMB capable devices such as eMMC andUFS. Provides interface for in-kernel security controllers to accessRPMB unit.If unsure, select N.config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index ea6ea5bbbc9c..8af058ad1df4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_LKDTM) += lkdtm/ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_RPMB) += rpmb-core.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o diff --git a/drivers/misc/rpmb-core.c b/drivers/misc/rpmb-core.c new file mode 100644 index 000000000000..e42a45debc76 --- /dev/null +++ b/drivers/misc/rpmb-core.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright(c) 2015 - 2019 Intel Corporation. All rights reserved.
- Copyright(c) 2021 - 2024 Linaro Ltd.
- */
+#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/rpmb.h> +#include <linux/slab.h>
+static struct list_head rpmb_dev_list; +static DEFINE_MUTEX(rpmb_mutex); +static struct blocking_notifier_head rpmb_interface =
- BLOCKING_NOTIFIER_INIT(rpmb_interface);
+/**
- rpmb_dev_get() - increase rpmb device ref counter
- @rdev: rpmb device
- */
+struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev) +{
- if (rdev)
get_device(rdev->parent_dev);- return rdev;
+} +EXPORT_SYMBOL_GPL(rpmb_dev_get);
+/**
- rpmb_dev_put() - decrease rpmb device ref counter
- @rdev: rpmb device
- */
+void rpmb_dev_put(struct rpmb_dev *rdev) +{
- if (rdev)
put_device(rdev->parent_dev);+} +EXPORT_SYMBOL_GPL(rpmb_dev_put);
+/**
- rpmb_route_frames() - route rpmb frames to rpmb device
- @rdev: rpmb device
- @req: rpmb request frames
- @req_len: length of rpmb request frames in bytes
- @rsp: rpmb response frames
- @rsp_len: length of rpmb response frames in bytes
- Returns: < 0 on failure
- */
+int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req,
unsigned int req_len, u8 *rsp, unsigned int rsp_len)+{
- if (!req || !req_len || !rsp || !rsp_len)
return -EINVAL;- return rdev->descr.route_frames(rdev->parent_dev, req, req_len,
rsp, rsp_len);+} +EXPORT_SYMBOL_GPL(rpmb_route_frames);
+/**
- rpmb_dev_find_device() - return first matching rpmb device
- @data: data for the match function
- @match: the matching function
- Iterate over registered RPMB devices, and call @match() for each passing
- it the RPMB device and @data.
- The return value of @match() is checked for each call. If it returns
- anything other 0, break and return the found RPMB device.
- It's the callers responsibility to call rpmb_dev_put() on the returned
- device, when it's done with it.
- Returns: a matching rpmb device or NULL on failure
- */
+struct rpmb_dev *rpmb_dev_find_device(const void *data,
const struct rpmb_dev *start,int (*match)(struct rpmb_dev *rdev,const void *data))+{
- struct rpmb_dev *rdev;
- struct list_head *pos;
- mutex_lock(&rpmb_mutex);
- if (start)
pos = start->list_node.next;- else
pos = rpmb_dev_list.next;- while (pos != &rpmb_dev_list) {
rdev = container_of(pos, struct rpmb_dev, list_node);if (match(rdev, data)) {rpmb_dev_get(rdev);goto out;}pos = pos->next;- }
- rdev = NULL;
+out:
- mutex_unlock(&rpmb_mutex);
- return rdev;
+} +EXPORT_SYMBOL_GPL(rpmb_dev_find_device);
+/**
- rpmb_dev_unregister() - unregister RPMB partition from the RPMB subsystem
- @rdev: the rpmb device to unregister
- This function should be called from the release function of the
- underlying device used when the RPMB device was registered.
- Returns: < 0 on failure
- */
+int rpmb_dev_unregister(struct rpmb_dev *rdev) +{
- if (!rdev)
return -EINVAL;- mutex_lock(&rpmb_mutex);
- list_del(&rdev->list_node);
- mutex_unlock(&rpmb_mutex);
- kfree(rdev->descr.dev_id);
- kfree(rdev);
- return 0;
+} +EXPORT_SYMBOL_GPL(rpmb_dev_unregister);
+/**
- rpmb_dev_register - register RPMB partition with the RPMB subsystem
- @dev: storage device of the rpmb device
- @ops: device specific operations
- While registering the RPMB partition extract needed device information
- while needed resources are available.
- Returns: a pointer to a 'struct rpmb_dev' or an ERR_PTR on failure
- */
+struct rpmb_dev *rpmb_dev_register(struct device *dev,
struct rpmb_descr *descr)+{
- struct rpmb_dev *rdev;
- if (!dev || !descr || !descr->route_frames || !descr->dev_id ||
!descr->dev_id_len)return ERR_PTR(-EINVAL);- rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
- if (!rdev)
return ERR_PTR(-ENOMEM);- rdev->descr = *descr;
- rdev->descr.dev_id = kmemdup(descr->dev_id, descr->dev_id_len,
GFP_KERNEL);- if (!rdev->descr.dev_id) {
kfree(rdev);return ERR_PTR(-ENOMEM);- }
- rdev->parent_dev = dev;
- dev_dbg(rdev->parent_dev, "registered device\n");
- mutex_lock(&rpmb_mutex);
- list_add_tail(&rdev->list_node, &rpmb_dev_list);
- blocking_notifier_call_chain(&rpmb_interface, RPMB_NOTIFY_ADD_DEVICE,
rdev);- mutex_unlock(&rpmb_mutex);
- return rdev;
+} +EXPORT_SYMBOL_GPL(rpmb_dev_register);
+/**
- rpmb_interface_register() - register for new device notifications
- @nb : New entry in notifier chain
- Returns: 0 on success -EEXIST on error.
- */
+int rpmb_interface_register(struct notifier_block *nb) +{
- struct rpmb_dev *rdev;
- int ret;
- ret = blocking_notifier_chain_register(&rpmb_interface, nb);
- if (ret)
return ret;- mutex_lock(&rpmb_mutex);
- list_for_each_entry(rdev, &rpmb_dev_list, list_node)
nb->notifier_call(nb, RPMB_NOTIFY_ADD_DEVICE, rdev);- mutex_unlock(&rpmb_mutex);
- return 0;
+} +EXPORT_SYMBOL_GPL(rpmb_interface_register);
+/**
- rpmb_interface_unregister() - unregister from new device notifications
- @nb : Entry to remove from notifier chain
- Returns: 0 on success or -ENOENT on failure.
- */
+int rpmb_interface_unregister(struct notifier_block *nb) +{
- return blocking_notifier_chain_unregister(&rpmb_interface, nb);
+} +EXPORT_SYMBOL_GPL(rpmb_interface_unregister);
+static int __init rpmb_init(void) +{
- INIT_LIST_HEAD(&rpmb_dev_list);
- return 0;
+}
+static void __exit rpmb_exit(void) +{
- mutex_destroy(&rpmb_mutex);
+}
+subsys_initcall(rpmb_init); +module_exit(rpmb_exit);
+MODULE_AUTHOR("Jens Wiklander jens.wiklander@linaro.org"); +MODULE_DESCRIPTION("RPMB class"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/rpmb.h b/include/linux/rpmb.h new file mode 100644 index 000000000000..3ced206fdc17 --- /dev/null +++ b/include/linux/rpmb.h @@ -0,0 +1,136 @@ +/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */ +/*
- Copyright (C) 2015-2019 Intel Corp. All rights reserved
- Copyright (C) 2021-2022 Linaro Ltd
- */
+#ifndef __RPMB_H__ +#define __RPMB_H__
+#include <linux/types.h> +#include <linux/device.h> +#include <linux/notifier.h>
+/**
- enum rpmb_type - type of underlying storage technology
- @RPMB_TYPE_EMMC : emmc (JESD84-B50.1)
- @RPMB_TYPE_UFS : UFS (JESD220)
- @RPMB_TYPE_NVME : NVM Express
- */
+enum rpmb_type {
- RPMB_TYPE_EMMC,
- RPMB_TYPE_UFS,
- RPMB_TYPE_NVME,
+};
+/**
- struct rpmb_descr - RPMB description provided by the underlying block device
- @type : block device type
- @route_frames : routes frames to and from the RPMB device
- @dev_id : unique device identifier read from the hardware
- @dev_id_len : length of unique device identifier
- @reliable_wr_count: number of sectors that can be written in one access
- @capacity : capacity of the device in units of 128K
- @dev_id is intended to be used as input when deriving the authenticaion key.
- */
+struct rpmb_descr {
- enum rpmb_type type;
- int (*route_frames)(struct device *dev, u8 *req, unsigned int req_len,
u8 *resp, unsigned int resp_len);- u8 *dev_id;
- size_t dev_id_len;
- u16 reliable_wr_count;
- u16 capacity;
+};
+/**
- struct rpmb_dev - device which can support RPMB partition
- @parent_dev : parent device
- @list_node : linked list node
- @descr : RPMB description
- */
+struct rpmb_dev {
- struct device *parent_dev;
- struct list_head list_node;
- struct rpmb_descr descr;
+};
+enum rpmb_interface_action {
- RPMB_NOTIFY_ADD_DEVICE,
+};
+/**
- struct rpmb_interface - subscribe to new RPMB devices
- @list_node : linked list node
- @add_rdev : notifies that a new RPMB device has been found
- */
+struct rpmb_interface {
- struct list_head list_node;
- void (*add_rdev)(struct rpmb_interface *intf, struct rpmb_dev *rdev);
+};
+#if IS_ENABLED(CONFIG_RPMB) +struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev); +void rpmb_dev_put(struct rpmb_dev *rdev); +struct rpmb_dev *rpmb_dev_find_device(const void *data,
const struct rpmb_dev *start,int (*match)(struct rpmb_dev *rdev,const void *data));+struct rpmb_dev *rpmb_dev_register(struct device *dev,
struct rpmb_descr *descr);+int rpmb_dev_unregister(struct rpmb_dev *rdev);
+int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req,
unsigned int req_len, u8 *resp, unsigned int resp_len);+int rpmb_interface_register(struct notifier_block *nb); +int rpmb_interface_unregister(struct notifier_block *nb); +#else +static inline struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev) +{
- return NULL;
+}
+static inline void rpmb_dev_put(struct rpmb_dev *rdev) { }
+static inline struct rpmb_dev * +rpmb_dev_find_device(const void *data, const struct rpmb_dev *start,
int (*match)(struct rpmb_dev *rdev, const void *data))+{
- return NULL;
+}
+static inline struct rpmb_dev * +rpmb_dev_register(struct device *dev, const struct rpmb_ops *ops) +{
- return NULL;
+}
+static inline int rpmb_dev_unregister(struct rpmb_dev *dev) +{
- return 0;
+}
+static inline int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req,
unsigned int req_len, u8 *resp,unsigned int resp_len)+{
- return -EOPNOTSUPP;
+}
+static inline int rpmb_interface_register(struct notifier_block *nb) +{
- return -EOPNOTSUPP;
+}
+static inline int rpmb_interface_unregister(struct notifier_block *nb) +{
- return -EOPNOTSUPP;
+} +#endif /* CONFIG_RPMB */
+#endif /* __RPMB_H__ */
2.34.1
On Tue, May 07, 2024 at 11:16:17AM +0200, Jens Wiklander wrote:
A number of storage technologies support a specialised hardware partition designed to be resistant to replay attacks. The underlying HW protocols differ but the operations are common. The RPMB partition cannot be accessed via standard block layer, but by a set of specific RPMB commands. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver interface which can be accessed by the optee driver to facilitate early RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver provides a callback to route RPMB frames to the RPMB device accessible via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE device driver itself.
Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Alex Bennée alex.bennee@linaro.org Signed-off-by: Shyam Saini shyamsaini@linux.microsoft.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Reviewed-by: Linus Walleij linus.walleij@linaro.org
MAINTAINERS | 7 ++ drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++++++++++++ include/linux/rpmb.h | 136 +++++++++++++++++++++++ 5 files changed, 387 insertions(+) create mode 100644 drivers/misc/rpmb-core.c create mode 100644 include/linux/rpmb.h
diff --git a/MAINTAINERS b/MAINTAINERS index 8999497011a2..e83152c42499 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19012,6 +19012,13 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml F: drivers/media/platform/sunxi/sun8i-rotate/ +RPMB SUBSYSTEM +M: Jens Wiklander jens.wiklander@linaro.org +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/misc/rpmb-core.c +F: include/linux/rpmb.h
RPMSG TTY DRIVER M: Arnaud Pouliquen arnaud.pouliquen@foss.st.com L: linux-remoteproc@vger.kernel.org diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4fb291f0bf7c..dbff9e8c3a03 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -104,6 +104,16 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here. +config RPMB
- tristate "RPMB partition interface"
- depends on MMC
- help
Unified RPMB unit interface for RPMB capable devices such as eMMC andUFS. Provides interface for in-kernel security controllers to accessRPMB unit.If unsure, select N.config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index ea6ea5bbbc9c..8af058ad1df4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_LKDTM) += lkdtm/ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_RPMB) += rpmb-core.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o diff --git a/drivers/misc/rpmb-core.c b/drivers/misc/rpmb-core.c new file mode 100644 index 000000000000..e42a45debc76 --- /dev/null +++ b/drivers/misc/rpmb-core.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright(c) 2015 - 2019 Intel Corporation. All rights reserved.
- Copyright(c) 2021 - 2024 Linaro Ltd.
- */
+#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/rpmb.h> +#include <linux/slab.h>
+static struct list_head rpmb_dev_list; +static DEFINE_MUTEX(rpmb_mutex); +static struct blocking_notifier_head rpmb_interface =
- BLOCKING_NOTIFIER_INIT(rpmb_interface);
+/**
- rpmb_dev_get() - increase rpmb device ref counter
- @rdev: rpmb device
- */
+struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev) +{
- if (rdev)
get_device(rdev->parent_dev);
Odd, why are you thinking the parent reference has anything to do with this device's reference?
Why isn't this a "real" device and part of the driver model properly? This way of "hanging onto" a device and attempting to influence it's reference count is odd, please make this real and not "fake".
Bonus, you get that notifier callback "for free" if you do that. But really, notifier callbacks are a pain, are you sure you want that?
thanks,
greg k-h
On Tue, May 14, 2024 at 5:45 PM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
On Tue, May 07, 2024 at 11:16:17AM +0200, Jens Wiklander wrote:
A number of storage technologies support a specialised hardware partition designed to be resistant to replay attacks. The underlying HW protocols differ but the operations are common. The RPMB partition cannot be accessed via standard block layer, but by a set of specific RPMB commands. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver interface which can be accessed by the optee driver to facilitate early RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver provides a callback to route RPMB frames to the RPMB device accessible via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE device driver itself.
Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Alex Bennée alex.bennee@linaro.org Signed-off-by: Shyam Saini shyamsaini@linux.microsoft.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Reviewed-by: Linus Walleij linus.walleij@linaro.org
MAINTAINERS | 7 ++ drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++++++++++++ include/linux/rpmb.h | 136 +++++++++++++++++++++++ 5 files changed, 387 insertions(+) create mode 100644 drivers/misc/rpmb-core.c create mode 100644 include/linux/rpmb.h
diff --git a/MAINTAINERS b/MAINTAINERS index 8999497011a2..e83152c42499 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19012,6 +19012,13 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml F: drivers/media/platform/sunxi/sun8i-rotate/
+RPMB SUBSYSTEM +M: Jens Wiklander jens.wiklander@linaro.org +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/misc/rpmb-core.c +F: include/linux/rpmb.h
RPMSG TTY DRIVER M: Arnaud Pouliquen arnaud.pouliquen@foss.st.com L: linux-remoteproc@vger.kernel.org diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4fb291f0bf7c..dbff9e8c3a03 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -104,6 +104,16 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here.
+config RPMB
tristate "RPMB partition interface"depends on MMChelpUnified RPMB unit interface for RPMB capable devices such as eMMC andUFS. Provides interface for in-kernel security controllers to accessRPMB unit.If unsure, select N.config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index ea6ea5bbbc9c..8af058ad1df4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_LKDTM) += lkdtm/ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_RPMB) += rpmb-core.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o diff --git a/drivers/misc/rpmb-core.c b/drivers/misc/rpmb-core.c new file mode 100644 index 000000000000..e42a45debc76 --- /dev/null +++ b/drivers/misc/rpmb-core.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright(c) 2015 - 2019 Intel Corporation. All rights reserved.
- Copyright(c) 2021 - 2024 Linaro Ltd.
- */
+#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/rpmb.h> +#include <linux/slab.h>
+static struct list_head rpmb_dev_list; +static DEFINE_MUTEX(rpmb_mutex); +static struct blocking_notifier_head rpmb_interface =
BLOCKING_NOTIFIER_INIT(rpmb_interface);+/**
- rpmb_dev_get() - increase rpmb device ref counter
- @rdev: rpmb device
- */
+struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev) +{
if (rdev)get_device(rdev->parent_dev);Odd, why are you thinking the parent reference has anything to do with this device's reference?
Why isn't this a "real" device and part of the driver model properly? This way of "hanging onto" a device and attempting to influence it's reference count is odd, please make this real and not "fake".
I did this in response to https://lore.kernel.org/lkml/CAPDyKFqNhGWKm=+7niNsjXOjEJE3U=o7dRNG=JqpptUSo9...
Perhaps "parent_dev" isn't the best name. The struct rpmb_dev can be seen as another representation of the underlying device. The life cycle of struct rpmb_dev is tied to the underlying device with rpmb_dev_register() and rpmb_dev_unregister(). Just as rpmb_route_frames() forwards the frames to the device, rpmb_dev_{get, put}() does the corresponding thing.
Bonus, you get that notifier callback "for free" if you do that. But really, notifier callbacks are a pain, are you sure you want that?
Yes, they are needed because the device may show up late and the OP-TEE driver doesn't know if any device will show up. As Ulf pointed out in the link above, at this point, there's no need to tell user space about this kernel internal abstraction.
Thanks, Jens
thanks,
greg k-h
On Wed, May 15, 2024 at 09:51:32AM +0200, Jens Wiklander wrote:
On Tue, May 14, 2024 at 5:45 PM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
On Tue, May 07, 2024 at 11:16:17AM +0200, Jens Wiklander wrote:
A number of storage technologies support a specialised hardware partition designed to be resistant to replay attacks. The underlying HW protocols differ but the operations are common. The RPMB partition cannot be accessed via standard block layer, but by a set of specific RPMB commands. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver interface which can be accessed by the optee driver to facilitate early RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver provides a callback to route RPMB frames to the RPMB device accessible via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE device driver itself.
Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Alex Bennée alex.bennee@linaro.org Signed-off-by: Shyam Saini shyamsaini@linux.microsoft.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Reviewed-by: Linus Walleij linus.walleij@linaro.org
MAINTAINERS | 7 ++ drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++++++++++++ include/linux/rpmb.h | 136 +++++++++++++++++++++++ 5 files changed, 387 insertions(+) create mode 100644 drivers/misc/rpmb-core.c create mode 100644 include/linux/rpmb.h
diff --git a/MAINTAINERS b/MAINTAINERS index 8999497011a2..e83152c42499 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19012,6 +19012,13 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml F: drivers/media/platform/sunxi/sun8i-rotate/
+RPMB SUBSYSTEM +M: Jens Wiklander jens.wiklander@linaro.org +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/misc/rpmb-core.c +F: include/linux/rpmb.h
RPMSG TTY DRIVER M: Arnaud Pouliquen arnaud.pouliquen@foss.st.com L: linux-remoteproc@vger.kernel.org diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4fb291f0bf7c..dbff9e8c3a03 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -104,6 +104,16 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here.
+config RPMB
tristate "RPMB partition interface"depends on MMChelpUnified RPMB unit interface for RPMB capable devices such as eMMC andUFS. Provides interface for in-kernel security controllers to accessRPMB unit.If unsure, select N.config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index ea6ea5bbbc9c..8af058ad1df4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_LKDTM) += lkdtm/ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_RPMB) += rpmb-core.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o diff --git a/drivers/misc/rpmb-core.c b/drivers/misc/rpmb-core.c new file mode 100644 index 000000000000..e42a45debc76 --- /dev/null +++ b/drivers/misc/rpmb-core.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright(c) 2015 - 2019 Intel Corporation. All rights reserved.
- Copyright(c) 2021 - 2024 Linaro Ltd.
- */
+#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/rpmb.h> +#include <linux/slab.h>
+static struct list_head rpmb_dev_list; +static DEFINE_MUTEX(rpmb_mutex); +static struct blocking_notifier_head rpmb_interface =
BLOCKING_NOTIFIER_INIT(rpmb_interface);+/**
- rpmb_dev_get() - increase rpmb device ref counter
- @rdev: rpmb device
- */
+struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev) +{
if (rdev)get_device(rdev->parent_dev);Odd, why are you thinking the parent reference has anything to do with this device's reference?
Why isn't this a "real" device and part of the driver model properly? This way of "hanging onto" a device and attempting to influence it's reference count is odd, please make this real and not "fake".
I did this in response to https://lore.kernel.org/lkml/CAPDyKFqNhGWKm=+7niNsjXOjEJE3U=o7dRNG=JqpptUSo9...
And I would argue, "Yes, we do need yet-another class and sysfs entry".
This is a "device" that a driver controls, it is NOT the parent device, it is a class device, so as such, make it one. That's what the driver model is for. Trying to avoid it causes problems.
Perhaps "parent_dev" isn't the best name. The struct rpmb_dev can be seen as another representation of the underlying device.
I.e. a class device. So use that :)
The life cycle of struct rpmb_dev is tied to the underlying device with rpmb_dev_register() and rpmb_dev_unregister(). Just as rpmb_route_frames() forwards the frames to the device, rpmb_dev_{get, put}() does the corresponding thing.
You should never be modifying the reference count of a device you really do not control, unless you are trying to make sure it is present to use it yourself.
Bonus, you get that notifier callback "for free" if you do that. But really, notifier callbacks are a pain, are you sure you want that?
Yes, they are needed because the device may show up late and the OP-TEE driver doesn't know if any device will show up. As Ulf pointed out in the link above, at this point, there's no need to tell user space about this kernel internal abstraction.
If this is a representation of how the device is interacted with, then yes, you do need to represent that.
thanks,
greg k-h
On Wed, May 15, 2024 at 10:04 AM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
On Wed, May 15, 2024 at 09:51:32AM +0200, Jens Wiklander wrote:
On Tue, May 14, 2024 at 5:45 PM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
On Tue, May 07, 2024 at 11:16:17AM +0200, Jens Wiklander wrote:
A number of storage technologies support a specialised hardware partition designed to be resistant to replay attacks. The underlying HW protocols differ but the operations are common. The RPMB partition cannot be accessed via standard block layer, but by a set of specific RPMB commands. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver interface which can be accessed by the optee driver to facilitate early RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver provides a callback to route RPMB frames to the RPMB device accessible via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE device driver itself.
Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Alex Bennée alex.bennee@linaro.org Signed-off-by: Shyam Saini shyamsaini@linux.microsoft.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Reviewed-by: Linus Walleij linus.walleij@linaro.org
MAINTAINERS | 7 ++ drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++++++++++++ include/linux/rpmb.h | 136 +++++++++++++++++++++++ 5 files changed, 387 insertions(+) create mode 100644 drivers/misc/rpmb-core.c create mode 100644 include/linux/rpmb.h
diff --git a/MAINTAINERS b/MAINTAINERS index 8999497011a2..e83152c42499 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19012,6 +19012,13 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml F: drivers/media/platform/sunxi/sun8i-rotate/
+RPMB SUBSYSTEM +M: Jens Wiklander jens.wiklander@linaro.org +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/misc/rpmb-core.c +F: include/linux/rpmb.h
RPMSG TTY DRIVER M: Arnaud Pouliquen arnaud.pouliquen@foss.st.com L: linux-remoteproc@vger.kernel.org diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4fb291f0bf7c..dbff9e8c3a03 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -104,6 +104,16 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here.
+config RPMB
tristate "RPMB partition interface"depends on MMChelpUnified RPMB unit interface for RPMB capable devices such as eMMC andUFS. Provides interface for in-kernel security controllers to accessRPMB unit.If unsure, select N.config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index ea6ea5bbbc9c..8af058ad1df4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_LKDTM) += lkdtm/ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_RPMB) += rpmb-core.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o diff --git a/drivers/misc/rpmb-core.c b/drivers/misc/rpmb-core.c new file mode 100644 index 000000000000..e42a45debc76 --- /dev/null +++ b/drivers/misc/rpmb-core.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright(c) 2015 - 2019 Intel Corporation. All rights reserved.
- Copyright(c) 2021 - 2024 Linaro Ltd.
- */
+#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/rpmb.h> +#include <linux/slab.h>
+static struct list_head rpmb_dev_list; +static DEFINE_MUTEX(rpmb_mutex); +static struct blocking_notifier_head rpmb_interface =
BLOCKING_NOTIFIER_INIT(rpmb_interface);+/**
- rpmb_dev_get() - increase rpmb device ref counter
- @rdev: rpmb device
- */
+struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev) +{
if (rdev)get_device(rdev->parent_dev);Odd, why are you thinking the parent reference has anything to do with this device's reference?
Why isn't this a "real" device and part of the driver model properly? This way of "hanging onto" a device and attempting to influence it's reference count is odd, please make this real and not "fake".
I did this in response to https://lore.kernel.org/lkml/CAPDyKFqNhGWKm=+7niNsjXOjEJE3U=o7dRNG=JqpptUSo9...
And I would argue, "Yes, we do need yet-another class and sysfs entry".
This is a "device" that a driver controls, it is NOT the parent device, it is a class device, so as such, make it one. That's what the driver model is for. Trying to avoid it causes problems.
Perhaps "parent_dev" isn't the best name. The struct rpmb_dev can be seen as another representation of the underlying device.
I.e. a class device. So use that :)
I see your point.
The life cycle of struct rpmb_dev is tied to the underlying device with rpmb_dev_register() and rpmb_dev_unregister(). Just as rpmb_route_frames() forwards the frames to the device, rpmb_dev_{get, put}() does the corresponding thing.
You should never be modifying the reference count of a device you really do not control, unless you are trying to make sure it is present to use it yourself.
Bonus, you get that notifier callback "for free" if you do that. But really, notifier callbacks are a pain, are you sure you want that?
Yes, they are needed because the device may show up late and the OP-TEE driver doesn't know if any device will show up. As Ulf pointed out in the link above, at this point, there's no need to tell user space about this kernel internal abstraction.
If this is a representation of how the device is interacted with, then yes, you do need to represent that.
Thanks for straightening out this. I'll bring back the class device in the next version
Cheers, Jens
Register eMMC RPMB partition with the RPMB subsystem and provide an implementation for the RPMB access operations abstracting the actual multi step process.
Add a callback to extract the needed device information at registration to avoid accessing the struct mmc_card at a later stage as we're not holding a reference counter for this struct.
Taking the needed reference to md->disk in mmc_blk_alloc_rpmb_part() instead of in mmc_rpmb_chrdev_open(). This is needed by the route_frames() function pointer in struct rpmb_ops.
Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Alexander Usyskin alexander.usyskin@intel.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org --- drivers/mmc/core/block.c | 241 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 239 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 32d49100dff5..a7f126fbc605 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -33,6 +33,7 @@ #include <linux/cdev.h> #include <linux/mutex.h> #include <linux/scatterlist.h> +#include <linux/string.h> #include <linux/string_helpers.h> #include <linux/delay.h> #include <linux/capability.h> @@ -40,6 +41,7 @@ #include <linux/pm_runtime.h> #include <linux/idr.h> #include <linux/debugfs.h> +#include <linux/rpmb.h>
#include <linux/mmc/ioctl.h> #include <linux/mmc/card.h> @@ -76,6 +78,48 @@ MODULE_ALIAS("mmc:block"); #define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16) #define MMC_EXTRACT_VALUE_FROM_ARG(x) ((x & 0x0000FF00) >> 8)
+/** + * struct rpmb_frame - rpmb frame as defined by eMMC 5.1 (JESD84-B51) + * + * @stuff : stuff bytes + * @key_mac : The authentication key or the message authentication + * code (MAC) depending on the request/response type. + * The MAC will be delivered in the last (or the only) + * block of data. + * @data : Data to be written or read by signed access. + * @nonce : Random number generated by the host for the requests + * and copied to the response by the RPMB engine. + * @write_counter: Counter value for the total amount of the successful + * authenticated data write requests made by the host. + * @addr : Address of the data to be programmed to or read + * from the RPMB. Address is the serial number of + * the accessed block (half sector 256B). + * @block_count : Number of blocks (half sectors, 256B) requested to be + * read/programmed. + * @result : Includes information about the status of the write counter + * (valid, expired) and result of the access made to the RPMB. + * @req_resp : Defines the type of request and response to/from the memory. + * + * The stuff bytes and big-endian properties are modeled to fit to the spec. + */ +struct rpmb_frame { + u8 stuff[196]; + u8 key_mac[32]; + u8 data[256]; + u8 nonce[16]; + __be32 write_counter; + __be16 addr; + __be16 block_count; + __be16 result; + __be16 req_resp; +} __packed; + +#define RPMB_PROGRAM_KEY 0x1 /* Program RPMB Authentication Key */ +#define RPMB_GET_WRITE_COUNTER 0x2 /* Read RPMB write counter */ +#define RPMB_WRITE_DATA 0x3 /* Write data to RPMB partition */ +#define RPMB_READ_DATA 0x4 /* Read data from RPMB partition */ +#define RPMB_RESULT_READ 0x5 /* Read result request (Internal) */ + static DEFINE_MUTEX(block_mutex);
/* @@ -163,6 +207,7 @@ struct mmc_rpmb_data { int id; unsigned int part_index; struct mmc_blk_data *md; + struct rpmb_dev *rdev; struct list_head node; };
@@ -2672,7 +2717,6 @@ static int mmc_rpmb_chrdev_open(struct inode *inode, struct file *filp)
get_device(&rpmb->dev); filp->private_data = rpmb; - mmc_blk_get(rpmb->md->disk);
return nonseekable_open(inode, filp); } @@ -2682,7 +2726,6 @@ static int mmc_rpmb_chrdev_release(struct inode *inode, struct file *filp) struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev, struct mmc_rpmb_data, chrdev);
- mmc_blk_put(rpmb->md); put_device(&rpmb->dev);
return 0; @@ -2703,10 +2746,165 @@ static void mmc_blk_rpmb_device_release(struct device *dev) { struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev);
+ rpmb_dev_unregister(rpmb->rdev); + mmc_blk_put(rpmb->md); ida_simple_remove(&mmc_rpmb_ida, rpmb->id); kfree(rpmb); }
+static void free_idata(struct mmc_blk_ioc_data **idata, unsigned int cmd_count) +{ + unsigned int n; + + for (n = 0; n < cmd_count; n++) + kfree(idata[n]); + kfree(idata); +} + +static struct mmc_blk_ioc_data **alloc_idata(struct mmc_rpmb_data *rpmb, + unsigned int cmd_count) +{ + struct mmc_blk_ioc_data **idata; + unsigned int n; + + idata = kcalloc(cmd_count, sizeof(*idata), GFP_KERNEL); + if (!idata) + return NULL; + + for (n = 0; n < cmd_count; n++) { + idata[n] = kcalloc(1, sizeof(**idata), GFP_KERNEL); + if (!idata[n]) { + free_idata(idata, n); + return NULL; + } + idata[n]->rpmb = rpmb; + } + + return idata; +} + +static void set_idata(struct mmc_blk_ioc_data *idata, u32 opcode, + int write_flag, u8 *buf, unsigned int buf_bytes) +{ + /* + * The size of an RPMB frame must match what's expected by the + * hardware. + */ + BUILD_BUG_ON(sizeof(struct rpmb_frame) != 512); + + idata->ic.opcode = opcode; + idata->ic.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + idata->ic.write_flag = write_flag; + idata->ic.blksz = sizeof(struct rpmb_frame); + idata->ic.blocks = buf_bytes / idata->ic.blksz; + idata->buf = buf; + idata->buf_bytes = buf_bytes; +} + +static int mmc_route_rpmb_frames(struct device *dev, u8 *req, + unsigned int req_len, u8 *resp, + unsigned int resp_len) +{ + struct rpmb_frame *frm = (struct rpmb_frame *)req; + struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev); + struct mmc_blk_data *md = rpmb->md; + struct mmc_blk_ioc_data **idata; + struct mmc_queue_req *mq_rq; + unsigned int cmd_count; + struct request *rq; + u16 req_type; + bool write; + int ret; + + if (IS_ERR(md->queue.card)) + return PTR_ERR(md->queue.card); + + if (req_len < sizeof(*frm)) + return -EINVAL; + + req_type = be16_to_cpu(frm->req_resp); + switch (req_type) { + case RPMB_PROGRAM_KEY: + if (req_len != sizeof(struct rpmb_frame) || + resp_len != sizeof(struct rpmb_frame)) + return -EINVAL; + write = true; + break; + case RPMB_GET_WRITE_COUNTER: + if (req_len != sizeof(struct rpmb_frame) || + resp_len != sizeof(struct rpmb_frame)) + return -EINVAL; + write = false; + break; + case RPMB_WRITE_DATA: + if (req_len % sizeof(struct rpmb_frame) || + resp_len != sizeof(struct rpmb_frame)) + return -EINVAL; + write = true; + break; + case RPMB_READ_DATA: + if (req_len != sizeof(struct rpmb_frame) || + resp_len % sizeof(struct rpmb_frame)) + return -EINVAL; + write = false; + break; + default: + return -EINVAL; + } + + if (write) + cmd_count = 3; + else + cmd_count = 2; + + idata = alloc_idata(rpmb, cmd_count); + if (!idata) + return -ENOMEM; + + if (write) { + struct rpmb_frame *frm = (struct rpmb_frame *)resp; + + /* Send write request frame(s) */ + set_idata(idata[0], MMC_WRITE_MULTIPLE_BLOCK, + 1 | MMC_CMD23_ARG_REL_WR, req, req_len); + + /* Send result request frame */ + memset(frm, 0, sizeof(*frm)); + frm->req_resp = cpu_to_be16(RPMB_RESULT_READ); + set_idata(idata[1], MMC_WRITE_MULTIPLE_BLOCK, 1, resp, + resp_len); + + /* Read response frame */ + set_idata(idata[2], MMC_READ_MULTIPLE_BLOCK, 0, resp, resp_len); + } else { + /* Send write request frame(s) */ + set_idata(idata[0], MMC_WRITE_MULTIPLE_BLOCK, 1, req, req_len); + + /* Read response frame */ + set_idata(idata[1], MMC_READ_MULTIPLE_BLOCK, 0, resp, resp_len); + } + + rq = blk_mq_alloc_request(md->queue.queue, REQ_OP_DRV_OUT, 0); + if (IS_ERR(rq)) { + ret = PTR_ERR(rq); + goto out; + } + + mq_rq = req_to_mmc_queue_req(rq); + mq_rq->drv_op = MMC_DRV_OP_IOCTL_RPMB; + mq_rq->drv_op_result = -EIO; + mq_rq->drv_op_data = idata; + mq_rq->ioc_count = cmd_count; + blk_execute_rq(rq, false); + ret = req_to_mmc_queue_req(rq)->drv_op_result; + + blk_mq_free_request(rq); + +out: + free_idata(idata, cmd_count); + return ret; +} + static int mmc_blk_alloc_rpmb_part(struct mmc_card *card, struct mmc_blk_data *md, unsigned int part_index, @@ -2741,6 +2939,7 @@ static int mmc_blk_alloc_rpmb_part(struct mmc_card *card, rpmb->dev.release = mmc_blk_rpmb_device_release; device_initialize(&rpmb->dev); dev_set_drvdata(&rpmb->dev, rpmb); + mmc_blk_get(md->disk); rpmb->md = md;
cdev_init(&rpmb->chrdev, &mmc_rpmb_fileops); @@ -3002,6 +3201,42 @@ static void mmc_blk_remove_debugfs(struct mmc_card *card,
#endif /* CONFIG_DEBUG_FS */
+static void mmc_blk_rpmb_add(struct mmc_card *card) +{ + struct mmc_blk_data *md = dev_get_drvdata(&card->dev); + struct mmc_rpmb_data *rpmb; + struct rpmb_dev *rdev; + unsigned int n; + u32 cid[4]; + struct rpmb_descr descr = { + .type = RPMB_TYPE_EMMC, + .route_frames = mmc_route_rpmb_frames, + .reliable_wr_count = card->ext_csd.enhanced_rpmb_supported ? + 2 : 32, + .capacity = card->ext_csd.raw_rpmb_size_mult, + .dev_id = (void *)cid, + .dev_id_len = sizeof(cid), + }; + + /* + * Provice CID as an octet array. The CID needs to be interpreted + * when used as input to derive the RPMB key since some fields + * will change due to firmware updates. + */ + for (n = 0; n < 4; n++) + cid[n] = be32_to_cpu(card->raw_cid[n]); + + list_for_each_entry(rpmb, &md->rpmbs, node) { + rdev = rpmb_dev_register(&rpmb->dev, &descr); + if (IS_ERR(rdev)) { + pr_warn("%s: could not register RPMB device\n", + dev_name(&rpmb->dev)); + continue; + } + rpmb->rdev = rdev; + } +} + static int mmc_blk_probe(struct mmc_card *card) { struct mmc_blk_data *md; @@ -3047,6 +3282,8 @@ static int mmc_blk_probe(struct mmc_card *card) pm_runtime_enable(&card->dev); }
+ mmc_blk_rpmb_add(card); + return 0;
out:
On Tue, May 07, 2024 at 11:16:18AM +0200, Jens Wiklander wrote:
Register eMMC RPMB partition with the RPMB subsystem and provide an implementation for the RPMB access operations abstracting the actual multi step process.
Add a callback to extract the needed device information at registration to avoid accessing the struct mmc_card at a later stage as we're not holding a reference counter for this struct.
Taking the needed reference to md->disk in mmc_blk_alloc_rpmb_part() instead of in mmc_rpmb_chrdev_open(). This is needed by the route_frames() function pointer in struct rpmb_ops.
Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Alexander Usyskin alexander.usyskin@intel.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org
Tested-by: Manuel Traut manut@mecka.net
drivers/mmc/core/block.c | 241 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 239 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 32d49100dff5..a7f126fbc605 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -33,6 +33,7 @@ #include <linux/cdev.h> #include <linux/mutex.h> #include <linux/scatterlist.h> +#include <linux/string.h> #include <linux/string_helpers.h> #include <linux/delay.h> #include <linux/capability.h> @@ -40,6 +41,7 @@ #include <linux/pm_runtime.h> #include <linux/idr.h> #include <linux/debugfs.h> +#include <linux/rpmb.h> #include <linux/mmc/ioctl.h> #include <linux/mmc/card.h> @@ -76,6 +78,48 @@ MODULE_ALIAS("mmc:block"); #define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16) #define MMC_EXTRACT_VALUE_FROM_ARG(x) ((x & 0x0000FF00) >> 8) +/**
- struct rpmb_frame - rpmb frame as defined by eMMC 5.1 (JESD84-B51)
- @stuff : stuff bytes
- @key_mac : The authentication key or the message authentication
code (MAC) depending on the request/response type.
The MAC will be delivered in the last (or the only)
block of data.
- @data : Data to be written or read by signed access.
- @nonce : Random number generated by the host for the requests
and copied to the response by the RPMB engine.
- @write_counter: Counter value for the total amount of the successful
authenticated data write requests made by the host.
- @addr : Address of the data to be programmed to or read
from the RPMB. Address is the serial number of
the accessed block (half sector 256B).
- @block_count : Number of blocks (half sectors, 256B) requested to be
read/programmed.
- @result : Includes information about the status of the write counter
(valid, expired) and result of the access made to the RPMB.
- @req_resp : Defines the type of request and response to/from the memory.
- The stuff bytes and big-endian properties are modeled to fit to the spec.
- */
+struct rpmb_frame {
- u8 stuff[196];
- u8 key_mac[32];
- u8 data[256];
- u8 nonce[16];
- __be32 write_counter;
- __be16 addr;
- __be16 block_count;
- __be16 result;
- __be16 req_resp;
+} __packed;
+#define RPMB_PROGRAM_KEY 0x1 /* Program RPMB Authentication Key */ +#define RPMB_GET_WRITE_COUNTER 0x2 /* Read RPMB write counter */ +#define RPMB_WRITE_DATA 0x3 /* Write data to RPMB partition */ +#define RPMB_READ_DATA 0x4 /* Read data from RPMB partition */ +#define RPMB_RESULT_READ 0x5 /* Read result request (Internal) */
static DEFINE_MUTEX(block_mutex); /* @@ -163,6 +207,7 @@ struct mmc_rpmb_data { int id; unsigned int part_index; struct mmc_blk_data *md;
- struct rpmb_dev *rdev; struct list_head node;
}; @@ -2672,7 +2717,6 @@ static int mmc_rpmb_chrdev_open(struct inode *inode, struct file *filp) get_device(&rpmb->dev); filp->private_data = rpmb;
- mmc_blk_get(rpmb->md->disk);
return nonseekable_open(inode, filp); } @@ -2682,7 +2726,6 @@ static int mmc_rpmb_chrdev_release(struct inode *inode, struct file *filp) struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev, struct mmc_rpmb_data, chrdev);
- mmc_blk_put(rpmb->md); put_device(&rpmb->dev);
return 0; @@ -2703,10 +2746,165 @@ static void mmc_blk_rpmb_device_release(struct device *dev) { struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev);
- rpmb_dev_unregister(rpmb->rdev);
- mmc_blk_put(rpmb->md); ida_simple_remove(&mmc_rpmb_ida, rpmb->id); kfree(rpmb);
} +static void free_idata(struct mmc_blk_ioc_data **idata, unsigned int cmd_count) +{
- unsigned int n;
- for (n = 0; n < cmd_count; n++)
kfree(idata[n]);- kfree(idata);
+}
+static struct mmc_blk_ioc_data **alloc_idata(struct mmc_rpmb_data *rpmb,
unsigned int cmd_count)+{
- struct mmc_blk_ioc_data **idata;
- unsigned int n;
- idata = kcalloc(cmd_count, sizeof(*idata), GFP_KERNEL);
- if (!idata)
return NULL;- for (n = 0; n < cmd_count; n++) {
idata[n] = kcalloc(1, sizeof(**idata), GFP_KERNEL);if (!idata[n]) {free_idata(idata, n);return NULL;}idata[n]->rpmb = rpmb;- }
- return idata;
+}
+static void set_idata(struct mmc_blk_ioc_data *idata, u32 opcode,
int write_flag, u8 *buf, unsigned int buf_bytes)+{
- /*
* The size of an RPMB frame must match what's expected by the* hardware.*/- BUILD_BUG_ON(sizeof(struct rpmb_frame) != 512);
- idata->ic.opcode = opcode;
- idata->ic.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
- idata->ic.write_flag = write_flag;
- idata->ic.blksz = sizeof(struct rpmb_frame);
- idata->ic.blocks = buf_bytes / idata->ic.blksz;
- idata->buf = buf;
- idata->buf_bytes = buf_bytes;
+}
+static int mmc_route_rpmb_frames(struct device *dev, u8 *req,
unsigned int req_len, u8 *resp,unsigned int resp_len)+{
- struct rpmb_frame *frm = (struct rpmb_frame *)req;
- struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev);
- struct mmc_blk_data *md = rpmb->md;
- struct mmc_blk_ioc_data **idata;
- struct mmc_queue_req *mq_rq;
- unsigned int cmd_count;
- struct request *rq;
- u16 req_type;
- bool write;
- int ret;
- if (IS_ERR(md->queue.card))
return PTR_ERR(md->queue.card);- if (req_len < sizeof(*frm))
return -EINVAL;- req_type = be16_to_cpu(frm->req_resp);
- switch (req_type) {
- case RPMB_PROGRAM_KEY:
if (req_len != sizeof(struct rpmb_frame) ||resp_len != sizeof(struct rpmb_frame))return -EINVAL;write = true;break;- case RPMB_GET_WRITE_COUNTER:
if (req_len != sizeof(struct rpmb_frame) ||resp_len != sizeof(struct rpmb_frame))return -EINVAL;write = false;break;- case RPMB_WRITE_DATA:
if (req_len % sizeof(struct rpmb_frame) ||resp_len != sizeof(struct rpmb_frame))return -EINVAL;write = true;break;- case RPMB_READ_DATA:
if (req_len != sizeof(struct rpmb_frame) ||resp_len % sizeof(struct rpmb_frame))return -EINVAL;write = false;break;- default:
return -EINVAL;- }
- if (write)
cmd_count = 3;- else
cmd_count = 2;- idata = alloc_idata(rpmb, cmd_count);
- if (!idata)
return -ENOMEM;- if (write) {
struct rpmb_frame *frm = (struct rpmb_frame *)resp;/* Send write request frame(s) */set_idata(idata[0], MMC_WRITE_MULTIPLE_BLOCK,1 | MMC_CMD23_ARG_REL_WR, req, req_len);/* Send result request frame */memset(frm, 0, sizeof(*frm));frm->req_resp = cpu_to_be16(RPMB_RESULT_READ);set_idata(idata[1], MMC_WRITE_MULTIPLE_BLOCK, 1, resp,resp_len);/* Read response frame */set_idata(idata[2], MMC_READ_MULTIPLE_BLOCK, 0, resp, resp_len);- } else {
/* Send write request frame(s) */set_idata(idata[0], MMC_WRITE_MULTIPLE_BLOCK, 1, req, req_len);/* Read response frame */set_idata(idata[1], MMC_READ_MULTIPLE_BLOCK, 0, resp, resp_len);- }
- rq = blk_mq_alloc_request(md->queue.queue, REQ_OP_DRV_OUT, 0);
- if (IS_ERR(rq)) {
ret = PTR_ERR(rq);goto out;- }
- mq_rq = req_to_mmc_queue_req(rq);
- mq_rq->drv_op = MMC_DRV_OP_IOCTL_RPMB;
- mq_rq->drv_op_result = -EIO;
- mq_rq->drv_op_data = idata;
- mq_rq->ioc_count = cmd_count;
- blk_execute_rq(rq, false);
- ret = req_to_mmc_queue_req(rq)->drv_op_result;
- blk_mq_free_request(rq);
+out:
- free_idata(idata, cmd_count);
- return ret;
+}
static int mmc_blk_alloc_rpmb_part(struct mmc_card *card, struct mmc_blk_data *md, unsigned int part_index, @@ -2741,6 +2939,7 @@ static int mmc_blk_alloc_rpmb_part(struct mmc_card *card, rpmb->dev.release = mmc_blk_rpmb_device_release; device_initialize(&rpmb->dev); dev_set_drvdata(&rpmb->dev, rpmb);
- mmc_blk_get(md->disk); rpmb->md = md;
cdev_init(&rpmb->chrdev, &mmc_rpmb_fileops); @@ -3002,6 +3201,42 @@ static void mmc_blk_remove_debugfs(struct mmc_card *card, #endif /* CONFIG_DEBUG_FS */ +static void mmc_blk_rpmb_add(struct mmc_card *card) +{
- struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
- struct mmc_rpmb_data *rpmb;
- struct rpmb_dev *rdev;
- unsigned int n;
- u32 cid[4];
- struct rpmb_descr descr = {
.type = RPMB_TYPE_EMMC,.route_frames = mmc_route_rpmb_frames,.reliable_wr_count = card->ext_csd.enhanced_rpmb_supported ?2 : 32,.capacity = card->ext_csd.raw_rpmb_size_mult,.dev_id = (void *)cid,.dev_id_len = sizeof(cid),- };
- /*
* Provice CID as an octet array. The CID needs to be interpreted* when used as input to derive the RPMB key since some fields* will change due to firmware updates.*/- for (n = 0; n < 4; n++)
cid[n] = be32_to_cpu(card->raw_cid[n]);- list_for_each_entry(rpmb, &md->rpmbs, node) {
rdev = rpmb_dev_register(&rpmb->dev, &descr);if (IS_ERR(rdev)) {pr_warn("%s: could not register RPMB device\n",dev_name(&rpmb->dev));continue;}rpmb->rdev = rdev;- }
+}
static int mmc_blk_probe(struct mmc_card *card) { struct mmc_blk_data *md; @@ -3047,6 +3282,8 @@ static int mmc_blk_probe(struct mmc_card *card) pm_runtime_enable(&card->dev); }
- mmc_blk_rpmb_add(card);
- return 0;
out: -- 2.34.1
Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and use an RPMB device via the RPMB subsystem instead of passing the RPMB frames via tee-supplicant in user space. A fallback mechanism is kept to route RPMB frames via tee-supplicant if the RPMB subsystem isn't available.
The OP-TEE RPC ABI is extended to support iterating over all RPMB devices until one is found with the expected RPMB key already programmed.
Signed-off-by: Jens Wiklander jens.wiklander@linaro.org --- drivers/tee/optee/core.c | 30 ++++++ drivers/tee/optee/device.c | 7 ++ drivers/tee/optee/ffa_abi.c | 8 ++ drivers/tee/optee/optee_private.h | 21 +++- drivers/tee/optee/optee_rpc_cmd.h | 35 +++++++ drivers/tee/optee/rpc.c | 166 ++++++++++++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 7 ++ 7 files changed, 273 insertions(+), 1 deletion(-)
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index 3aed554bc8d8..082691c10a90 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -11,6 +11,7 @@ #include <linux/io.h> #include <linux/mm.h> #include <linux/module.h> +#include <linux/rpmb.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/tee_drv.h> @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm, shm->pages = NULL; }
+void optee_bus_scan_rpmb(struct work_struct *work) +{ + struct optee *optee = container_of(work, struct optee, + rpmb_scan_bus_work); + int ret; + + if (!optee->rpmb_scan_bus_done) { + ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB); + optee->rpmb_scan_bus_done = !ret; + if (ret && ret != -ENODEV) + pr_info("Scanning for RPMB device: ret %d\n", ret); + } +} + +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, + void *data) +{ + struct optee *optee = container_of(intf, struct optee, rpmb_intf); + + if (action == RPMB_NOTIFY_ADD_DEVICE) + schedule_work(&optee->rpmb_scan_bus_work); + + return 0; +} + static void optee_bus_scan(struct work_struct *work) { WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP)); @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx)
void optee_remove_common(struct optee *optee) { + rpmb_interface_unregister(&optee->rpmb_intf); + cancel_work_sync(&optee->rpmb_scan_bus_work); /* Unregister OP-TEE specific client devices on TEE bus */ optee_unregister_devices();
@@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee) tee_shm_pool_free(optee->pool); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex); + rpmb_dev_put(optee->rpmb_dev); + mutex_destroy(&optee->rpmb_dev_mutex); }
static int smc_abi_rc; diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c index 4b1092127694..4274876857c8 100644 --- a/drivers/tee/optee/device.c +++ b/drivers/tee/optee/device.c @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session, ret = tee_client_invoke_func(ctx, &inv_arg, param); if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { + /* + * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting + * the list of device TAs that depends on RPMB but a usable + * RPMB device isn't found. + */ + if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE) + return -ENODEV; pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", inv_arg.ret); return -EINVAL; diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c index ecb5eb079408..a8dfdb30b4e8 100644 --- a/drivers/tee/optee/ffa_abi.c +++ b/drivers/tee/optee/ffa_abi.c @@ -7,6 +7,7 @@
#include <linux/arm_ffa.h> #include <linux/errno.h> +#include <linux/rpmb.h> #include <linux/scatterlist.h> #include <linux/sched.h> #include <linux/slab.h> @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) optee_cq_init(&optee->call_queue, 0); optee_supp_init(&optee->supp); optee_shm_arg_cache_init(optee, arg_cache_flags); + mutex_init(&optee->rpmb_dev_mutex); ffa_dev_set_drvdata(ffa_dev, optee); ctx = teedev_open(optee->teedev); if (IS_ERR(ctx)) { @@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) if (rc) goto err_unregister_devices;
+ INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; + rpmb_interface_register(&optee->rpmb_intf); pr_info("initialized driver\n"); return 0;
@@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) teedev_close_context(ctx); err_rhashtable_free: rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL); + rpmb_dev_put(optee->rpmb_dev); + mutex_destroy(&optee->rpmb_dev_mutex); + rpmb_interface_unregister(&optee->rpmb_intf); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex); mutex_destroy(&optee->ffa.mutex); diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 7a5243c78b55..ae72f3dda1d2 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -8,6 +8,7 @@
#include <linux/arm-smccc.h> #include <linux/rhashtable.h> +#include <linux/rpmb.h> #include <linux/semaphore.h> #include <linux/tee_drv.h> #include <linux/types.h> @@ -20,11 +21,13 @@ /* Some Global Platform error codes used in this driver */ #define TEEC_SUCCESS 0x00000000 #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008 #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A #define TEEC_ERROR_COMMUNICATION 0xFFFF000E #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C #define TEEC_ERROR_BUSY 0xFFFF000D #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003
#define TEEC_ORIGIN_COMMS 0x00000002
@@ -197,6 +200,12 @@ struct optee_ops { * @notif: notification synchronization struct * @supp: supplicant synchronization struct for RPC to supplicant * @pool: shared memory pool + * @mutex: mutex protecting @rpmb_dev + * @rpmb_dev: current RPMB device or NULL + * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices + * was already done + * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus + * and register RPMB dependent optee drivers * @rpc_param_count: If > 0 number of RPC parameters to make room for * @scan_bus_done flag if device registation was already done. * @scan_bus_work workq to scan optee bus and register optee drivers @@ -215,9 +224,15 @@ struct optee { struct optee_notif notif; struct optee_supp supp; struct tee_shm_pool *pool; + /* Protects rpmb_dev pointer */ + struct mutex rpmb_dev_mutex; + struct rpmb_dev *rpmb_dev; + struct notifier_block rpmb_intf; unsigned int rpc_param_count; - bool scan_bus_done; + bool scan_bus_done; + bool rpmb_scan_bus_done; struct work_struct scan_bus_work; + struct work_struct rpmb_scan_bus_work; };
struct optee_session { @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
#define PTA_CMD_GET_DEVICES 0x0 #define PTA_CMD_GET_DEVICES_SUPP 0x1 +#define PTA_CMD_GET_DEVICES_RPMB 0x2 int optee_enumerate_devices(u32 func); void optee_unregister_devices(void); +void optee_bus_scan_rpmb(struct work_struct *work); +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, + void *data);
int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm, size_t size, size_t align, diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h index f3f06e0994a7..4a3c02914f9c 100644 --- a/drivers/tee/optee/optee_rpc_cmd.h +++ b/drivers/tee/optee/optee_rpc_cmd.h @@ -103,4 +103,39 @@ /* I2C master control flags */ #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0)
+/* + * Reset RPMB probing + * + * Releases an eventually already used RPMB devices and starts over searching + * for RPMB devices. Returns the kind of shared memory to use in subsequent + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls. + * + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for + * OPTEE_RPC_CMD_SHM_ALLOC + */ +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22 + +/* + * Probe next RPMB device + * + * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_* + * [out] value[0].b EXT CSD-slice 168 "RPMB Size" + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count" + * [out] memref[1] Buffer with the raw CID + */ +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23 + +/* Type of RPMB device */ +#define OPTEE_RPC_RPMB_EMMC 0 +#define OPTEE_RPC_RPMB_UFS 1 +#define OPTEE_RPC_RPMB_NVME 2 + +/* + * Replay Protected Memory Block access + * + * [in] memref[0] Frames to device + * [out] memref[1] Frames from device + */ +#define OPTEE_RPC_CMD_RPMB_FRAMES 24 + #endif /*__OPTEE_RPC_CMD_H*/ diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index e69bc6380683..f3acb4240fcb 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -7,6 +7,7 @@
#include <linux/delay.h> #include <linux/i2c.h> +#include <linux/rpmb.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include "optee_private.h" @@ -255,6 +256,162 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m); }
+static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx, + struct optee *optee, + struct optee_msg_arg *arg) +{ + struct tee_param params[1]; + + if (!IS_ENABLED(CONFIG_RPMB)) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL; + params[0].u.value.b = 0; + params[0].u.value.c = 0; + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + mutex_lock(&optee->rpmb_dev_mutex); + rpmb_dev_put(optee->rpmb_dev); + optee->rpmb_dev = NULL; + mutex_unlock(&optee->rpmb_dev_mutex); + + arg->ret = TEEC_SUCCESS; +} + +static int rpmb_type_to_rpc_type(enum rpmb_type rtype) +{ + switch (rtype) { + case RPMB_TYPE_EMMC: + return OPTEE_RPC_RPMB_EMMC; + case RPMB_TYPE_UFS: + return OPTEE_RPC_RPMB_UFS; + case RPMB_TYPE_NVME: + return OPTEE_RPC_RPMB_NVME; + default: + return -1; + } +} + +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data) +{ + return rpmb_type_to_rpc_type(rdev->descr.type) >= 0; +} + +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx, + struct optee *optee, + struct optee_msg_arg *arg) +{ + struct rpmb_dev *rdev; + struct tee_param params[2]; + void *buf; + + if (!IS_REACHABLE(CONFIG_RPMB)) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT || + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + buf = tee_shm_get_va(params[1].u.memref.shm, + params[1].u.memref.shm_offs); + if (!buf) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + mutex_lock(&optee->rpmb_dev_mutex); + rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); + rpmb_dev_put(optee->rpmb_dev); + optee->rpmb_dev = rdev; + mutex_unlock(&optee->rpmb_dev_mutex); + + if (!rdev) { + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND; + return; + } + + if (params[1].u.memref.size < rdev->descr.dev_id_len) { + arg->ret = TEEC_ERROR_SHORT_BUFFER; + return; + } + memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len); + params[1].u.memref.size = rdev->descr.dev_id_len; + params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type); + params[0].u.value.b = rdev->descr.capacity; + params[0].u.value.c = rdev->descr.reliable_wr_count; + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + arg->ret = TEEC_SUCCESS; +} + +static void handle_rpc_func_rpmb_frames(struct tee_context *ctx, + struct optee *optee, + struct optee_msg_arg *arg) +{ + struct tee_param params[2]; + struct rpmb_dev *rdev; + void *p0, *p1; + + mutex_lock(&optee->rpmb_dev_mutex); + rdev = rpmb_dev_get(optee->rpmb_dev); + mutex_unlock(&optee->rpmb_dev_mutex); + if (!rdev) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT || + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + goto out; + } + + p0 = tee_shm_get_va(params[0].u.memref.shm, + params[0].u.memref.shm_offs); + p1 = tee_shm_get_va(params[1].u.memref.shm, + params[1].u.memref.shm_offs); + if (rpmb_route_frames(rdev, p0, params[0].u.memref.size, p1, + params[1].u.memref.size)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + goto out; + } + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + goto out; + } + arg->ret = TEEC_SUCCESS; +out: + rpmb_dev_put(rdev); +} + void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, struct optee_msg_arg *arg) { @@ -271,6 +428,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, case OPTEE_RPC_CMD_I2C_TRANSFER: handle_rpc_func_cmd_i2c_transfer(ctx, arg); break; + case OPTEE_RPC_CMD_RPMB_PROBE_RESET: + handle_rpc_func_rpmb_probe_reset(ctx, optee, arg); + break; + case OPTEE_RPC_CMD_RPMB_PROBE_NEXT: + handle_rpc_func_rpmb_probe_next(ctx, optee, arg); + break; + case OPTEE_RPC_CMD_RPMB_FRAMES: + handle_rpc_func_rpmb_frames(ctx, optee, arg); + break; default: handle_rpc_supp_cmd(ctx, optee, arg); } diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c index a37f87087e5c..c23bcf35c8cb 100644 --- a/drivers/tee/optee/smc_abi.c +++ b/drivers/tee/optee/smc_abi.c @@ -20,6 +20,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/rpmb.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/string.h> @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev) optee->smc.memremaped_shm = memremaped_shm; optee->pool = pool; optee_shm_arg_cache_init(optee, arg_cache_flags); + mutex_init(&optee->rpmb_dev_mutex);
platform_set_drvdata(pdev, optee); ctx = teedev_open(optee->teedev); @@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev) if (rc) goto err_disable_shm_cache;
+ INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; + rpmb_interface_register(&optee->rpmb_intf); pr_info("initialized driver\n"); return 0;
@@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev) err_close_ctx: teedev_close_context(ctx); err_supp_uninit: + rpmb_dev_put(optee->rpmb_dev); + mutex_destroy(&optee->rpmb_dev_mutex); optee_shm_arg_cache_uninit(optee); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex);
On Tue, May 07, 2024 at 11:16:19AM +0200, Jens Wiklander wrote:
Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and use an RPMB device via the RPMB subsystem instead of passing the RPMB frames via tee-supplicant in user space. A fallback mechanism is kept to route RPMB frames via tee-supplicant if the RPMB subsystem isn't available.
The OP-TEE RPC ABI is extended to support iterating over all RPMB devices until one is found with the expected RPMB key already programmed.
Signed-off-by: Jens Wiklander jens.wiklander@linaro.org
Tested-by: Manuel Traut manut@mecka.net
drivers/tee/optee/core.c | 30 ++++++ drivers/tee/optee/device.c | 7 ++ drivers/tee/optee/ffa_abi.c | 8 ++ drivers/tee/optee/optee_private.h | 21 +++- drivers/tee/optee/optee_rpc_cmd.h | 35 +++++++ drivers/tee/optee/rpc.c | 166 ++++++++++++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 7 ++ 7 files changed, 273 insertions(+), 1 deletion(-)
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index 3aed554bc8d8..082691c10a90 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -11,6 +11,7 @@ #include <linux/io.h> #include <linux/mm.h> #include <linux/module.h> +#include <linux/rpmb.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/tee_drv.h> @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm, shm->pages = NULL; } +void optee_bus_scan_rpmb(struct work_struct *work) +{
- struct optee *optee = container_of(work, struct optee,
rpmb_scan_bus_work);- int ret;
- if (!optee->rpmb_scan_bus_done) {
ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB);optee->rpmb_scan_bus_done = !ret;if (ret && ret != -ENODEV)pr_info("Scanning for RPMB device: ret %d\n", ret);- }
+}
+int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
void *data)+{
- struct optee *optee = container_of(intf, struct optee, rpmb_intf);
- if (action == RPMB_NOTIFY_ADD_DEVICE)
schedule_work(&optee->rpmb_scan_bus_work);- return 0;
+}
static void optee_bus_scan(struct work_struct *work) { WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP)); @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx) void optee_remove_common(struct optee *optee) {
- rpmb_interface_unregister(&optee->rpmb_intf);
- cancel_work_sync(&optee->rpmb_scan_bus_work); /* Unregister OP-TEE specific client devices on TEE bus */ optee_unregister_devices();
@@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee) tee_shm_pool_free(optee->pool); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex);
- rpmb_dev_put(optee->rpmb_dev);
- mutex_destroy(&optee->rpmb_dev_mutex);
} static int smc_abi_rc; diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c index 4b1092127694..4274876857c8 100644 --- a/drivers/tee/optee/device.c +++ b/drivers/tee/optee/device.c @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session, ret = tee_client_invoke_func(ctx, &inv_arg, param); if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) {
/** TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting* the list of device TAs that depends on RPMB but a usable* RPMB device isn't found.*/if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE)return -ENODEV;diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c index ecb5eb079408..a8dfdb30b4e8 100644 --- a/drivers/tee/optee/ffa_abi.c +++ b/drivers/tee/optee/ffa_abi.c @@ -7,6 +7,7 @@ #include <linux/arm_ffa.h> #include <linux/errno.h> +#include <linux/rpmb.h> #include <linux/scatterlist.h> #include <linux/sched.h> #include <linux/slab.h> @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) optee_cq_init(&optee->call_queue, 0); optee_supp_init(&optee->supp); optee_shm_arg_cache_init(optee, arg_cache_flags);
- mutex_init(&optee->rpmb_dev_mutex); ffa_dev_set_drvdata(ffa_dev, optee); ctx = teedev_open(optee->teedev); if (IS_ERR(ctx)) {
@@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) if (rc) goto err_unregister_devices;
- INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
- optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
- rpmb_interface_register(&optee->rpmb_intf); pr_info("initialized driver\n"); return 0;
@@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) teedev_close_context(ctx); err_rhashtable_free: rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
- rpmb_dev_put(optee->rpmb_dev);
- mutex_destroy(&optee->rpmb_dev_mutex);
- rpmb_interface_unregister(&optee->rpmb_intf); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex); mutex_destroy(&optee->ffa.mutex);
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 7a5243c78b55..ae72f3dda1d2 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -8,6 +8,7 @@ #include <linux/arm-smccc.h> #include <linux/rhashtable.h> +#include <linux/rpmb.h> #include <linux/semaphore.h> #include <linux/tee_drv.h> #include <linux/types.h> @@ -20,11 +21,13 @@ /* Some Global Platform error codes used in this driver */ #define TEEC_SUCCESS 0x00000000 #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008 #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A #define TEEC_ERROR_COMMUNICATION 0xFFFF000E #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C #define TEEC_ERROR_BUSY 0xFFFF000D #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003 #define TEEC_ORIGIN_COMMS 0x00000002 @@ -197,6 +200,12 @@ struct optee_ops {
- @notif: notification synchronization struct
- @supp: supplicant synchronization struct for RPC to supplicant
- @pool: shared memory pool
- @mutex: mutex protecting @rpmb_dev
- @rpmb_dev: current RPMB device or NULL
- @rpmb_scan_bus_done flag if device registation of RPMB dependent devices
was already done
- @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus
and register RPMB dependent optee drivers- @rpc_param_count: If > 0 number of RPC parameters to make room for
- @scan_bus_done flag if device registation was already done.
- @scan_bus_work workq to scan optee bus and register optee drivers
@@ -215,9 +224,15 @@ struct optee { struct optee_notif notif; struct optee_supp supp; struct tee_shm_pool *pool;
- /* Protects rpmb_dev pointer */
- struct mutex rpmb_dev_mutex;
- struct rpmb_dev *rpmb_dev;
- struct notifier_block rpmb_intf; unsigned int rpc_param_count;
- bool scan_bus_done;
- bool scan_bus_done;
- bool rpmb_scan_bus_done; struct work_struct scan_bus_work;
- struct work_struct rpmb_scan_bus_work;
}; struct optee_session { @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session); #define PTA_CMD_GET_DEVICES 0x0 #define PTA_CMD_GET_DEVICES_SUPP 0x1 +#define PTA_CMD_GET_DEVICES_RPMB 0x2 int optee_enumerate_devices(u32 func); void optee_unregister_devices(void); +void optee_bus_scan_rpmb(struct work_struct *work); +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
void *data);int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm, size_t size, size_t align, diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h index f3f06e0994a7..4a3c02914f9c 100644 --- a/drivers/tee/optee/optee_rpc_cmd.h +++ b/drivers/tee/optee/optee_rpc_cmd.h @@ -103,4 +103,39 @@ /* I2C master control flags */ #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0) +/*
- Reset RPMB probing
- Releases an eventually already used RPMB devices and starts over searching
- for RPMB devices. Returns the kind of shared memory to use in subsequent
- OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls.
- [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for
OPTEE_RPC_CMD_SHM_ALLOC- */
+#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22
+/*
- Probe next RPMB device
- [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_*
- [out] value[0].b EXT CSD-slice 168 "RPMB Size"
- [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count"
- [out] memref[1] Buffer with the raw CID
- */
+#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23
+/* Type of RPMB device */ +#define OPTEE_RPC_RPMB_EMMC 0 +#define OPTEE_RPC_RPMB_UFS 1 +#define OPTEE_RPC_RPMB_NVME 2
+/*
- Replay Protected Memory Block access
- [in] memref[0] Frames to device
- [out] memref[1] Frames from device
- */
+#define OPTEE_RPC_CMD_RPMB_FRAMES 24
#endif /*__OPTEE_RPC_CMD_H*/ diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index e69bc6380683..f3acb4240fcb 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -7,6 +7,7 @@ #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/rpmb.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include "optee_private.h" @@ -255,6 +256,162 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m); } +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx,
struct optee *optee,struct optee_msg_arg *arg)+{
- struct tee_param params[1];
- if (!IS_ENABLED(CONFIG_RPMB)) {
handle_rpc_supp_cmd(ctx, optee, arg);return;- }
- if (arg->num_params != ARRAY_SIZE(params) ||
optee->ops->from_msg_param(optee, params, arg->num_params,arg->params) ||params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) {arg->ret = TEEC_ERROR_BAD_PARAMETERS;return;- }
- params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL;
- params[0].u.value.b = 0;
- params[0].u.value.c = 0;
- if (optee->ops->to_msg_param(optee, arg->params,
arg->num_params, params)) {arg->ret = TEEC_ERROR_BAD_PARAMETERS;return;- }
- mutex_lock(&optee->rpmb_dev_mutex);
- rpmb_dev_put(optee->rpmb_dev);
- optee->rpmb_dev = NULL;
- mutex_unlock(&optee->rpmb_dev_mutex);
- arg->ret = TEEC_SUCCESS;
+}
+static int rpmb_type_to_rpc_type(enum rpmb_type rtype) +{
- switch (rtype) {
- case RPMB_TYPE_EMMC:
return OPTEE_RPC_RPMB_EMMC;- case RPMB_TYPE_UFS:
return OPTEE_RPC_RPMB_UFS;- case RPMB_TYPE_NVME:
return OPTEE_RPC_RPMB_NVME;- default:
return -1;- }
+}
+static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data) +{
- return rpmb_type_to_rpc_type(rdev->descr.type) >= 0;
+}
+static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx,
struct optee *optee,struct optee_msg_arg *arg)+{
- struct rpmb_dev *rdev;
- struct tee_param params[2];
- void *buf;
- if (!IS_REACHABLE(CONFIG_RPMB)) {
handle_rpc_supp_cmd(ctx, optee, arg);return;- }
- if (arg->num_params != ARRAY_SIZE(params) ||
optee->ops->from_msg_param(optee, params, arg->num_params,arg->params) ||params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT ||params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {arg->ret = TEEC_ERROR_BAD_PARAMETERS;return;- }
- buf = tee_shm_get_va(params[1].u.memref.shm,
params[1].u.memref.shm_offs);- if (!buf) {
arg->ret = TEEC_ERROR_BAD_PARAMETERS;return;- }
- mutex_lock(&optee->rpmb_dev_mutex);
- rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match);
- rpmb_dev_put(optee->rpmb_dev);
- optee->rpmb_dev = rdev;
- mutex_unlock(&optee->rpmb_dev_mutex);
- if (!rdev) {
arg->ret = TEEC_ERROR_ITEM_NOT_FOUND;return;- }
- if (params[1].u.memref.size < rdev->descr.dev_id_len) {
arg->ret = TEEC_ERROR_SHORT_BUFFER;return;- }
- memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len);
- params[1].u.memref.size = rdev->descr.dev_id_len;
- params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type);
- params[0].u.value.b = rdev->descr.capacity;
- params[0].u.value.c = rdev->descr.reliable_wr_count;
- if (optee->ops->to_msg_param(optee, arg->params,
arg->num_params, params)) {arg->ret = TEEC_ERROR_BAD_PARAMETERS;return;- }
- arg->ret = TEEC_SUCCESS;
+}
+static void handle_rpc_func_rpmb_frames(struct tee_context *ctx,
struct optee *optee,struct optee_msg_arg *arg)+{
- struct tee_param params[2];
- struct rpmb_dev *rdev;
- void *p0, *p1;
- mutex_lock(&optee->rpmb_dev_mutex);
- rdev = rpmb_dev_get(optee->rpmb_dev);
- mutex_unlock(&optee->rpmb_dev_mutex);
- if (!rdev) {
handle_rpc_supp_cmd(ctx, optee, arg);return;- }
- if (arg->num_params != ARRAY_SIZE(params) ||
optee->ops->from_msg_param(optee, params, arg->num_params,arg->params) ||params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT ||params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {arg->ret = TEEC_ERROR_BAD_PARAMETERS;goto out;- }
- p0 = tee_shm_get_va(params[0].u.memref.shm,
params[0].u.memref.shm_offs);- p1 = tee_shm_get_va(params[1].u.memref.shm,
params[1].u.memref.shm_offs);- if (rpmb_route_frames(rdev, p0, params[0].u.memref.size, p1,
params[1].u.memref.size)) {arg->ret = TEEC_ERROR_BAD_PARAMETERS;goto out;- }
- if (optee->ops->to_msg_param(optee, arg->params,
arg->num_params, params)) {arg->ret = TEEC_ERROR_BAD_PARAMETERS;goto out;- }
- arg->ret = TEEC_SUCCESS;
+out:
- rpmb_dev_put(rdev);
+}
void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, struct optee_msg_arg *arg) { @@ -271,6 +428,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, case OPTEE_RPC_CMD_I2C_TRANSFER: handle_rpc_func_cmd_i2c_transfer(ctx, arg); break;
- case OPTEE_RPC_CMD_RPMB_PROBE_RESET:
handle_rpc_func_rpmb_probe_reset(ctx, optee, arg);break;- case OPTEE_RPC_CMD_RPMB_PROBE_NEXT:
handle_rpc_func_rpmb_probe_next(ctx, optee, arg);break;- case OPTEE_RPC_CMD_RPMB_FRAMES:
handle_rpc_func_rpmb_frames(ctx, optee, arg);break;diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c index a37f87087e5c..c23bcf35c8cb 100644 --- a/drivers/tee/optee/smc_abi.c +++ b/drivers/tee/optee/smc_abi.c @@ -20,6 +20,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/rpmb.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/string.h> @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev) optee->smc.memremaped_shm = memremaped_shm; optee->pool = pool; optee_shm_arg_cache_init(optee, arg_cache_flags);
- mutex_init(&optee->rpmb_dev_mutex);
platform_set_drvdata(pdev, optee); ctx = teedev_open(optee->teedev); @@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev) if (rc) goto err_disable_shm_cache;
- INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
- optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
- rpmb_interface_register(&optee->rpmb_intf); pr_info("initialized driver\n"); return 0;
@@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev) err_close_ctx: teedev_close_context(ctx); err_supp_uninit:
- rpmb_dev_put(optee->rpmb_dev);
- mutex_destroy(&optee->rpmb_dev_mutex); optee_shm_arg_cache_uninit(optee); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex);
-- 2.34.1
Hi Jens,
thank you very much for v6! It took me some time to figure out why it is not working.. However it seems to be on the OP-TEE side and not related to this kernel series.
I need this change:
@@ -1214,12 +1225,13 @@ static TEE_Result tee_rpmb_init(void) }
if (rpmb_ctx->reinit) { if (rpmb_ctx->legacy_operation || !rpmb_ctx->key_verified) { rpmb_ctx->wr_cnt_synced = false; rpmb_ctx->key_derived = false; rpmb_ctx->dev_info_synced = false; rpmb_ctx->reinit = false; - goto next; } res = rpmb_probe_reset(); if (res) {
@@ -1236,17 +1248,23 @@ static TEE_Result tee_rpmb_init(void) if (!memcmp(rpmb_ctx->cid, dev_info.cid, RPMB_EMMC_CID_SIZE)) { rpmb_ctx->reinit = false; + rpmb_ctx->legacy_operation = false; return TEE_SUCCESS; } } }
to ensure that the non legacy mode is selected, even if the first RPMB request comes from a compiled in TA.
Thanks for your work, it makes it really easy now to implement ARM System Ready IR with an fTPM and continue the boot measurements in the initrd with the new tpm2.target in systemd v256.
Regards Manuel
On Tue, May 07, 2024 at 11:16:16AM +0200, Jens Wiklander wrote:
Hi,
This patch set introduces a new RPMB subsystem, based on patches from [1], [2], and [3]. The RPMB subsystem aims at providing access to RPMB partitions to other kernel drivers, in particular the OP-TEE driver. A new user space ABI isn't needed, we can instead continue using the already present ABI when writing the RPMB key during production.
I've added and removed things to keep only what is needed by the OP-TEE driver. Since the posting of [3], there has been major changes in the MMC subsystem so "mmc: block: register RPMB partition with the RPMB subsystem" is in practice completely rewritten.
With this OP-TEE can access RPMB during early boot instead of having to wait for user space to become available as in the current design [4]. This will benefit the efi variables [5] since we wont rely on userspace as well as some TPM issues [6] that were solved.
The OP-TEE driver finds the correct RPMB device to interact with by iterating over available devices until one is found with a programmed authentication matching the one OP-TEE is using. This enables coexisting users of other RPMBs since the owner can be determined by who knows the authentication key.
The corresponding secure world OP-TEE patches are available at [7].
I've put myself as a maintainer for the RPMB subsystem as I have an interest in the OP-TEE driver to keep this in good shape. However, if you'd rather see someone else taking the maintainership that's fine too. I'll help keep the subsystem updated regardless.
[1] https://lore.kernel.org/lkml/20230722014037.42647-1-shyamsaini@linux.microso... [2] https://lore.kernel.org/lkml/20220405093759.1126835-2-alex.bennee@linaro.org... [3] https://lore.kernel.org/linux-mmc/1478548394-8184-2-git-send-email-tomas.win... [4] https://optee.readthedocs.io/en/latest/architecture/secure_storage.html#rpmb... [5] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... [6] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... [7] https://github.com/jenswi-linaro/optee_os/tree/rpmb_probe_v6
Thanks, Jens
Changes since v5: Manuel Traut reported and investigated an error on an i.MX8MM, the root cause was identified as insufficient alignment on frames sent to the RPMB device. Fixed in the OP-TEE driver as described below.
- "rpmb: add Replay Protected Memory Block (RPMB) subsystem"
- Adding a missing EXPORT_SYMBOL_GPL()
- "optee: probe RPMB device using RPMB subsystem"
- Replacing the old OPTEE_RPC_CMD_RPMB ABI with OPTEE_RPC_CMD_RPMB_FRAMES to get rid of the small header struct rpmb_req (now removed) causing the problem.
- Matching changes on the secure side + support for re-initializing RPMB in case a boot stage has used RPMB, the latter also reported by Manuel Traut.
Changes since v4:
- "rpmb: add Replay Protected Memory Block (RPMB) subsystem"
- Describing struct rpmb_descr as RPMB description instead of descriptor
- "mmc: block: register RPMB partition with the RPMB subsystem"
- Addressing review comments
- Adding more comments for struct rpmb_frame
- Fixing assignment of reliable_wr_count and capacity in mmc_blk_rpmb_add()
- "optee: probe RPMB device using RPMB subsystem"
- Updating struct rpmb_dev_info to match changes in "rpmb: add Replay Protected Memory Block (RPMB) subsystem"
Changes since v3:
- Move struct rpmb_frame into the MMC driver since the format of the RPMB frames depend on the implementation, one format for eMMC, another for UFS, and so on
- "rpmb: add Replay Protected Memory Block (RPMB) subsystem"
- Adding Reviewed-by: Linus Walleij linus.walleij@linaro.org
- Adding more description of the API functions
- Removing the set_dev_info() op from struct rpmb_ops, the needed information is supplied in the arguments to rpmb_dev_register() instead.
- Getting rid of struct rpmb_ops since only the route_frames() op was remaining, store that op directly in struct rpmb_dev
- Changed rpmb_interface_register() and rpmb_interface_unregister() to use notifier_block instead of implementing the same thing ourselves
- "mmc: block: register RPMB partition with the RPMB subsystem"
- Moving the call to rpmb_dev_register() to be done at the end of mmc_blk_probe() when the device is fully available
- "optee: probe RPMB device using RPMB subsystem"
- Use IS_REACHABLE(CONFIG_RPMB) to determine if the RPMB subsystem is available
- Translate TEE_ERROR_STORAGE_NOT_AVAILABLE if encountered in get_devices() to recognize the error in optee_rpmb_scan()
- Simplified optee_rpmb_scan() and optee_rpmb_intf_rdev()
Changes since v2:
- "rpmb: add Replay Protected Memory Block (RPMB) subsystem"
- Fixing documentation issues
- Adding a "depends on MMC" in the Kconfig
- Removed the class-device and the embedded device, struct rpmb_dev now relies on the parent device for reference counting as requested
- Removed the now unneeded rpmb_ops get_resources() and put_resources() since references are already taken in mmc_blk_alloc_rpmb_part() before rpmb_dev_register() is called
- Added rpmb_interface_{,un}register() now that class_interface_{,un}register() can't be used ay longer
- "mmc: block: register RPMB partition with the RPMB subsystem"
- Adding the missing error cleanup in alloc_idata()
- Taking the needed reference to md->disk in mmc_blk_alloc_rpmb_part() instead of in mmc_rpmb_chrdev_open() and rpmb_op_mmc_get_resources()
- "optee: probe RPMB device using RPMB subsystem"
- Registering to get a notification when an RPMB device comes online
- Probes for RPMB devices each time an RPMB device comes online, until a usable device is found
- When a usable RPMB device is found, call optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB)
- Pass type of rpmb in return value from OPTEE_RPC_CMD_RPMB_PROBE_NEXT
Changes since Shyam's RFC:
- Removed the remaining leftover rpmb_cdev_*() function calls
- Refactored the struct rpmb_ops with all the previous ops replaced, in some sense closer to [3] with the route_frames() op
- Added rpmb_route_frames()
- Added struct rpmb_frame, enum rpmb_op_result, and enum rpmb_type from [3]
- Removed all functions not needed in the OP-TEE use case
- Added "mmc: block: register RPMB partition with the RPMB subsystem", based on the commit with the same name in [3]
- Added "optee: probe RPMB device using RPMB subsystem" for integration with OP-TEE
- Moved the RPMB driver into drivers/misc/rpmb-core.c
- Added my name to MODULE_AUTHOR() in rpmb-core.c
- Added an rpmb_mutex to serialize access to the IDA
- Removed the target parameter from all rpmb_*() functions since it's currently unused
Jens Wiklander (3): rpmb: add Replay Protected Memory Block (RPMB) subsystem mmc: block: register RPMB partition with the RPMB subsystem optee: probe RPMB device using RPMB subsystem
MAINTAINERS | 7 + drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++ drivers/mmc/core/block.c | 241 +++++++++++++++++++++++++++++- drivers/tee/optee/core.c | 30 ++++ drivers/tee/optee/device.c | 7 + drivers/tee/optee/ffa_abi.c | 8 + drivers/tee/optee/optee_private.h | 21 ++- drivers/tee/optee/optee_rpc_cmd.h | 35 +++++ drivers/tee/optee/rpc.c | 166 ++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 7 + include/linux/rpmb.h | 136 +++++++++++++++++ 13 files changed, 899 insertions(+), 3 deletions(-) create mode 100644 drivers/misc/rpmb-core.c create mode 100644 include/linux/rpmb.h
-- 2.34.1
op-tee@lists.trustedfirmware.org
-
Greg Kroah-Hartman -
Jens Wiklander -
Manuel Traut