Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and use an RPMB device via the RPBM subsystem instead of passing the RPMB frames via tee-supplicant in user space. A fallback mechanism is kept to route RPMB frames via tee-supplicant if the RPMB subsystem isn't available.
The OP-TEE RPC ABI is extended to support iterating over all RPMB devices until one is found with the expected RPMB key already programmed.
Signed-off-by: Jens Wiklander jens.wiklander@linaro.org --- drivers/tee/optee/core.c | 1 + drivers/tee/optee/ffa_abi.c | 2 + drivers/tee/optee/optee_private.h | 6 + drivers/tee/optee/optee_rpc_cmd.h | 33 +++++ drivers/tee/optee/rpc.c | 221 ++++++++++++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 2 + 6 files changed, 265 insertions(+)
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index 3aed554bc8d8..21bcccbe2207 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -177,6 +177,7 @@ void optee_remove_common(struct optee *optee) tee_shm_pool_free(optee->pool); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex); + mutex_destroy(&optee->rpmb_dev_mutex); }
static int smc_abi_rc; diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c index ecb5eb079408..1d207a9d4f3b 100644 --- a/drivers/tee/optee/ffa_abi.c +++ b/drivers/tee/optee/ffa_abi.c @@ -934,6 +934,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) optee_cq_init(&optee->call_queue, 0); optee_supp_init(&optee->supp); optee_shm_arg_cache_init(optee, arg_cache_flags); + mutex_init(&optee->rpmb_dev_mutex); ffa_dev_set_drvdata(ffa_dev, optee); ctx = teedev_open(optee->teedev); if (IS_ERR(ctx)) { @@ -968,6 +969,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) teedev_close_context(ctx); err_rhashtable_free: rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL); + mutex_destroy(&optee->rpmb_dev_mutex); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex); mutex_destroy(&optee->ffa.mutex); diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 7a5243c78b55..3a87ad4ef1e2 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -20,6 +20,7 @@ /* Some Global Platform error codes used in this driver */ #define TEEC_SUCCESS 0x00000000 #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008 #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A #define TEEC_ERROR_COMMUNICATION 0xFFFF000E #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C @@ -197,6 +198,8 @@ struct optee_ops { * @notif: notification synchronization struct * @supp: supplicant synchronization struct for RPC to supplicant * @pool: shared memory pool + * @mutex: mutex protecting @rpmb_dev + * @rpmb_dev: current RPMB device or NULL * @rpc_param_count: If > 0 number of RPC parameters to make room for * @scan_bus_done flag if device registation was already done. * @scan_bus_work workq to scan optee bus and register optee drivers @@ -215,6 +218,9 @@ struct optee { struct optee_notif notif; struct optee_supp supp; struct tee_shm_pool *pool; + /* Protects rpmb_dev pointer */ + struct mutex rpmb_dev_mutex; + struct rpmb_dev *rpmb_dev; unsigned int rpc_param_count; bool scan_bus_done; struct work_struct scan_bus_work; diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h index f3f06e0994a7..672e5dcdf041 100644 --- a/drivers/tee/optee/optee_rpc_cmd.h +++ b/drivers/tee/optee/optee_rpc_cmd.h @@ -16,6 +16,14 @@ * and sends responses. */
+/* + * Replay Protected Memory Block access + * + * [in] memref[0] Frames to device + * [out] memref[1] Frames from device + */ +#define OPTEE_RPC_CMD_RPMB 1 + /* * Get time * @@ -103,4 +111,29 @@ /* I2C master control flags */ #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0)
+/* + * Reset RPMB probing + * + * Releases an eventually already used RPMB devices and starts over searching + * for RPMB devices. Returns the kind of shared memory to use in subsequent + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls. + * + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for + * OPTEE_RPC_CMD_SHM_ALLOC + */ +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22 + +/* + * Probe next RPMB device + * + * [out] value[0].a Must be OPTEE_RPC_RPMB_EMMC + * [out] value[0].b EXT CSD-slice 168 "RPMB Size" + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count" + * [out] memref[1] Buffer with the raw CID + */ +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23 + +/* Type of RPMB device */ +#define OPTEE_RPC_RPMB_EMMC 0 + #endif /*__OPTEE_RPC_CMD_H*/ diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index e69bc6380683..6fd6f99dafab 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -7,6 +7,7 @@
#include <linux/delay.h> #include <linux/i2c.h> +#include <linux/rpmb.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include "optee_private.h" @@ -255,6 +256,217 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m); }
+static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx, + struct optee *optee, + struct optee_msg_arg *arg) +{ + struct tee_param params[1]; + + if (!IS_ENABLED(CONFIG_RPMB)) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL; + params[0].u.value.b = 0; + params[0].u.value.c = 0; + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + mutex_lock(&optee->rpmb_dev_mutex); + rpmb_dev_put(optee->rpmb_dev); + optee->rpmb_dev = NULL; + mutex_unlock(&optee->rpmb_dev_mutex); + + arg->ret = TEEC_SUCCESS; +} + +static int rpc_rpmb_match(struct device *dev, const void *data) +{ + return 1; +} + +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx, + struct optee *optee, + struct optee_msg_arg *arg) +{ + struct rpmb_dev *start_rdev; + struct rpmb_dev *rdev; + struct tee_param params[2]; + void *buf; + + if (!IS_ENABLED(CONFIG_RPMB)) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT || + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + buf = tee_shm_get_va(params[1].u.memref.shm, + params[1].u.memref.shm_offs); + if (!buf) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + mutex_lock(&optee->rpmb_dev_mutex); + start_rdev = optee->rpmb_dev; + rdev = rpmb_dev_find_device(NULL, start_rdev, rpc_rpmb_match); + rpmb_dev_put(start_rdev); + optee->rpmb_dev = rdev; + mutex_unlock(&optee->rpmb_dev_mutex); + + if (!rdev) { + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND; + return; + } + + if (params[1].u.memref.size < rdev->dev_id_len) { + arg->ret = TEEC_ERROR_SHORT_BUFFER; + return; + } + memcpy(buf, rdev->dev_id, rdev->dev_id_len); + params[1].u.memref.size = rdev->dev_id_len; + params[0].u.value.a = OPTEE_RPC_RPMB_EMMC; + params[0].u.value.b = rdev->capacity; + params[0].u.value.c = rdev->reliable_wr_count; + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + arg->ret = TEEC_SUCCESS; +} + +/* Request */ +struct rpmb_req { + u16 cmd; +#define RPMB_CMD_DATA_REQ 0x00 +#define RPMB_CMD_GET_DEV_INFO 0x01 + u16 dev_id; + u16 block_count; + /* Optional data frames (rpmb_data_frame) follow */ +}; + +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1)) + +#define RPMB_CID_SZ 16 + +/* Response to device info request */ +struct rpmb_dev_info { + u8 cid[RPMB_CID_SZ]; + u8 rpmb_size_mult; /* EXT CSD-slice 168: RPMB Size */ + u8 rel_wr_sec_c; /* EXT CSD-slice 222: Reliable Write Sector */ + /* Count */ + u8 ret_code; +#define RPMB_CMD_GET_DEV_INFO_RET_OK 0x00 +#define RPMB_CMD_GET_DEV_INFO_RET_ERROR 0x01 +}; + +static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size) +{ + struct rpmb_dev_info *dev_info; + + if (rsp_size != sizeof(*dev_info)) + return TEEC_ERROR_BAD_PARAMETERS; + + dev_info = rsp; + memcpy(dev_info->cid, rdev->dev_id, sizeof(dev_info->cid)); + dev_info->rpmb_size_mult = rdev->capacity; + dev_info->rel_wr_sec_c = rdev->reliable_wr_count; + dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK; + + return TEEC_SUCCESS; +} + +/* + * req is one struct rpmb_req followed by one or more struct rpmb_data_frame + * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame + */ +static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev, + void *req, size_t req_size, + void *rsp, size_t rsp_size) +{ + struct rpmb_req *sreq = req; + int rc; + + if (req_size < sizeof(*sreq)) + return TEEC_ERROR_BAD_PARAMETERS; + + switch (sreq->cmd) { + case RPMB_CMD_DATA_REQ: + rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req), + req_size - sizeof(struct rpmb_req), + rsp, rsp_size); + if (rc) // TODO translate error code + return TEEC_ERROR_BAD_PARAMETERS; + return TEEC_SUCCESS; + case RPMB_CMD_GET_DEV_INFO: + return get_dev_info(rdev, rsp, rsp_size); + default: + return TEEC_ERROR_BAD_PARAMETERS; + } +} + +static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee, + struct optee_msg_arg *arg) +{ + struct tee_param params[2]; + struct rpmb_dev *rdev; + void *p0, *p1; + + mutex_lock(&optee->rpmb_dev_mutex); + rdev = rpmb_dev_get(optee->rpmb_dev); + mutex_unlock(&optee->rpmb_dev_mutex); + if (!rdev) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT || + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + goto out; + } + + p0 = tee_shm_get_va(params[0].u.memref.shm, + params[0].u.memref.shm_offs); + p1 = tee_shm_get_va(params[1].u.memref.shm, + params[1].u.memref.shm_offs); + arg->ret = rpmb_process_request(optee, rdev, p0, + params[0].u.memref.size, + p1, params[1].u.memref.size); + if (arg->ret) + goto out; + + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) + arg->ret = TEEC_ERROR_BAD_PARAMETERS; +out: + rpmb_dev_put(rdev); +} + void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, struct optee_msg_arg *arg) { @@ -271,6 +483,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, case OPTEE_RPC_CMD_I2C_TRANSFER: handle_rpc_func_cmd_i2c_transfer(ctx, arg); break; + case OPTEE_RPC_CMD_RPMB_PROBE_RESET: + handle_rpc_func_rpmb_probe_reset(ctx, optee, arg); + break; + case OPTEE_RPC_CMD_RPMB_PROBE_NEXT: + handle_rpc_func_rpmb_probe_next(ctx, optee, arg); + break; + case OPTEE_RPC_CMD_RPMB: + handle_rpc_func_rpmb(ctx, optee, arg); + break; default: handle_rpc_supp_cmd(ctx, optee, arg); } diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c index a37f87087e5c..8c85c3b8dbb4 100644 --- a/drivers/tee/optee/smc_abi.c +++ b/drivers/tee/optee/smc_abi.c @@ -1715,6 +1715,7 @@ static int optee_probe(struct platform_device *pdev) optee->smc.memremaped_shm = memremaped_shm; optee->pool = pool; optee_shm_arg_cache_init(optee, arg_cache_flags); + mutex_init(&optee->rpmb_dev_mutex);
platform_set_drvdata(pdev, optee); ctx = teedev_open(optee->teedev); @@ -1782,6 +1783,7 @@ static int optee_probe(struct platform_device *pdev) err_close_ctx: teedev_close_context(ctx); err_supp_uninit: + mutex_destroy(&optee->rpmb_dev_mutex); optee_shm_arg_cache_uninit(optee); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex);