On Tue, May 07, 2024 at 11:16:17AM +0200, Jens Wiklander wrote:
A number of storage technologies support a specialised hardware partition designed to be resistant to replay attacks. The underlying HW protocols differ but the operations are common. The RPMB partition cannot be accessed via standard block layer, but by a set of specific RPMB commands. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver interface which can be accessed by the optee driver to facilitate early RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver provides a callback to route RPMB frames to the RPMB device accessible via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE device driver itself.
Signed-off-by: Tomas Winkler tomas.winkler@intel.com Signed-off-by: Alex Bennée alex.bennee@linaro.org Signed-off-by: Shyam Saini shyamsaini@linux.microsoft.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Reviewed-by: Linus Walleij linus.walleij@linaro.org
MAINTAINERS | 7 ++ drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++++++++++++ include/linux/rpmb.h | 136 +++++++++++++++++++++++ 5 files changed, 387 insertions(+) create mode 100644 drivers/misc/rpmb-core.c create mode 100644 include/linux/rpmb.h
diff --git a/MAINTAINERS b/MAINTAINERS index 8999497011a2..e83152c42499 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19012,6 +19012,13 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml F: drivers/media/platform/sunxi/sun8i-rotate/ +RPMB SUBSYSTEM +M: Jens Wiklander jens.wiklander@linaro.org +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/misc/rpmb-core.c +F: include/linux/rpmb.h
RPMSG TTY DRIVER M: Arnaud Pouliquen arnaud.pouliquen@foss.st.com L: linux-remoteproc@vger.kernel.org diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4fb291f0bf7c..dbff9e8c3a03 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -104,6 +104,16 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here. +config RPMB
- tristate "RPMB partition interface"
- depends on MMC
- help
Unified RPMB unit interface for RPMB capable devices such as eMMC andUFS. Provides interface for in-kernel security controllers to accessRPMB unit.If unsure, select N.config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index ea6ea5bbbc9c..8af058ad1df4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_LKDTM) += lkdtm/ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_RPMB) += rpmb-core.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o diff --git a/drivers/misc/rpmb-core.c b/drivers/misc/rpmb-core.c new file mode 100644 index 000000000000..e42a45debc76 --- /dev/null +++ b/drivers/misc/rpmb-core.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright(c) 2015 - 2019 Intel Corporation. All rights reserved.
- Copyright(c) 2021 - 2024 Linaro Ltd.
- */
+#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/rpmb.h> +#include <linux/slab.h>
+static struct list_head rpmb_dev_list; +static DEFINE_MUTEX(rpmb_mutex); +static struct blocking_notifier_head rpmb_interface =
- BLOCKING_NOTIFIER_INIT(rpmb_interface);
+/**
- rpmb_dev_get() - increase rpmb device ref counter
- @rdev: rpmb device
- */
+struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev) +{
- if (rdev)
get_device(rdev->parent_dev);
Odd, why are you thinking the parent reference has anything to do with this device's reference?
Why isn't this a "real" device and part of the driver model properly? This way of "hanging onto" a device and attempting to influence it's reference count is odd, please make this real and not "fake".
Bonus, you get that notifier callback "for free" if you do that. But really, notifier callbacks are a pain, are you sure you want that?
thanks,
greg k-h