- OP-TEE - lists.trustedfirmware.org

by Joakim Bech

Hi Jerome, On Fri, Jul 24, 2020 at 02:57:34PM +0000, Jérôme Forissier via OP-TEE wrote: > Hi, > > Anyone know if the planned dates of OP-TEE releases are publicly available > somewhere? > Still a bit legacy regarding that, i.e., still tracked in the Linaro Jira instance. Even though the "Linaro OP-TEE Contributions" is publicly available, the release schedule seems to be locked down. > Readthedocs [1] documents that we do quarterly releases, but it would help > to have a more precise indication, at least for the next (upcoming) release. > Agree, I can replicate what we have in the Jira instance and put that on the release page you're referring to. > Can we count on 3.10.0 being made available by the end of August? > Yes, so it's about time to initiate the release work for that tag. As maintainers, let's sync up on that separately. Here are the dates for future releases. Version Start date Release date OP-TEE 3.10.0 23/May/20 21/Aug/20 OP-TEE 3.11.0 22/Aug/20 16/Oct/20 OP-TEE 3.12.0 17/Oct/20 15/Jan/21 OP-TEE 3.13.0 16/Jan/21 16/Apr/21 > [1] https://optee.readthedocs.io/en/latest/general/releases.html > > Thanks, > -- > Jerome > -- > OP-TEE mailing list > OP-TEE(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/op-tee -- Regards, Joakim

5 years, 11 months

2
2
0 0

OP-TEE release dates?

by Jérôme Forissier

Hi, Anyone know if the planned dates of OP-TEE releases are publicly available somewhere? Readthedocs [1] documents that we do quarterly releases, but it would help to have a more precise indication, at least for the next (upcoming) release. Can we count on 3.10.0 being made available by the end of August? [1] https://optee.readthedocs.io/en/latest/general/releases.html Thanks, -- Jerome

5 years, 11 months

1
0
0 0

Re: [PATCH] docs: staging/tee.rst: convert into definition list

by Jonathan Corbet

On Sat, 18 Jul 2020 13:50:58 -0300 "Daniel W. S. Almeida" <dwlsalmeida(a)gmail.com> wrote: > TEE bus infrastructure registers following APIs: > -- match(): iterates over the client driver UUID table to find a corresponding > - match for device UUID. If a match is found, then this particular device is > - probed via corresponding probe API registered by the client driver. This > - process happens whenever a device or a client driver is registered with TEE > - bus. > -- uevent(): notifies user-space (udev) whenever a new device is registered on > - TEE bus for auto-loading of modularized client drivers. > + > +match(): > + iterates over the client driver UUID table to find a corresponding > + match for device UUID. If a match is found, then this particular device is > + probed via corresponding probe API registered by the client driver. This > + process happens whenever a device or a client driver is registered with TEE > + bus. > + > +uevent(): > + notifies user-space (udev) whenever a new device is registered on > + TEE bus for auto-loading of modularized client drivers. Just FWIW, this could have been fixed by adding a blank line between the two bulleted entries. This fix is fine too, though, applied, thanks. jon

5 years, 11 months

1
0
0 0

[PATCH 1/2] hwrng: optee: handle unlimited data rates

by Jorge Ramirez-Ortiz

Data rates of MAX_UINT32 will schedule an unnecessary one jiffy timeout on the call to msleep. Avoid this scenario by using 0 as the unlimited data rate. Signed-off-by: Jorge Ramirez-Ortiz <jorge(a)foundries.io> --- drivers/char/hw_random/optee-rng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c index 49b2e02537dd..5bc4700c4dae 100644 --- a/drivers/char/hw_random/optee-rng.c +++ b/drivers/char/hw_random/optee-rng.c @@ -128,7 +128,7 @@ static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait) data += rng_size; read += rng_size; - if (wait) { + if (wait && pvt_data->data_rate) { if (timeout-- == 0) return read; msleep((1000 * (max - read)) / pvt_data->data_rate); -- 2.17.1

5 years, 11 months

1
1
0 0

[GIT PULL] optee bus for v5.9

by Jens Wiklander

Hello arm-soc maintainers, Please pull these patches enabling multi-stage OP-TEE bus enumeration and also adds a TPM driver for a OP-TEE based fTPM Trusted Application. The TPM driver depends on and takes advantage of the multi-stage OP-TEE bus enumeration by indicating that it should be probed after tee-supplicant has been started. Jarkko, one of the TPM maintainers, has been involved in reviewing these patches and agrees that I can include the TPM patch in the pull request. Thanks, Jens The following changes since commit 3d77e6a8804abcc0504c904bd6e5cdf3a5cf8162: Linux 5.7 (2020-05-31 16:49:15 -0700) are available in the Git repository at: git://git.linaro.org/people/jens.wiklander/linux-tee.git tags/optee-bus-for-v5.9 for you to fetch changes up to 9f1944c23c8cb1c033b73de80cf6c612a2a80a2b: tpm_ftpm_tee: register driver on TEE bus (2020-07-10 09:41:58 +0200) ---------------------------------------------------------------- Enable multi-stage OP-TEE bus enumeration Probes drivers on the OP-TEE bus in two steps. First for drivers which do not depend on tee-supplicant. After tee-supplicant has been started probe the devices which do depend on tee-supplicant. Also introduces driver which uses an OP-TEE based fTPM Trusted Application depends on tee-supplicant NV RAM implementation based on RPMB secure storage. ---------------------------------------------------------------- Maxim Uvarov (3): optee: use uuid for sysfs driver entry optee: enable support for multi-stage bus enumeration tpm_ftpm_tee: register driver on TEE bus Documentation/ABI/testing/sysfs-bus-optee-devices | 8 +++ MAINTAINERS | 1 + drivers/char/tpm/tpm_ftpm_tee.c | 70 +++++++++++++++++++---- drivers/tee/optee/core.c | 27 ++++++++- drivers/tee/optee/device.c | 38 ++++++------ drivers/tee/optee/optee_private.h | 10 +++- 6 files changed, 119 insertions(+), 35 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-optee-devices

5 years, 11 months

2
1
0 0

Re: OP-TEE Development Guidance

by Jens Wiklander

Hi Saad, On Thu, Jun 18, 2020 at 9:43 AM Muhammad Saad via OP-TEE <op-tee(a)lists.trustedfirmware.org> wrote: > > Hello All, > > First, I hope you are safe and doing fine in the unfortunate COVID-19 situation. I am a Ph.D. student at the University of Central Florida. Currently, I am working on a TEE-based prototype application for a proof-of-concept. Since I am totally new in this domain, so it is taking some effort. I have a few questions and I hope you guys can help me in that. > > At present, I am able to set up OP-TEE on Qemu and run the examples on the normal world and the secure world. Additionally, I tweaked a few parameters (ie., the integer value in the main.c) for the CA and the addition and subtraction sequence in the TA. Upon building it again (cd/build/make all run), it seems to work. However, if I need to pass a normal string to the TA and the TA computes Sha256 of the string and returns the value, what steps do I need to take? In other words, how can I pass a tuple from the TA to the CA and obtain the Hash of the tuple. Additionally, if I am able to do that by tailoring the HelloWorld examples, how can I develop new CA and TA with unique UUID and perform the same procedure. Finally, instead of doing the entire (cd/build/make all run), is there a method by which I can simply build the application and alone and run it on Qemu? You can find an example of doing some hashing at https://github.com/OP-TEE/optee_test/blob/391168ec03980e1cc8fb6d3e3c4b42481… You'll need to look around a little to get the whole picture, but it shouldn't be too hard. If you only change a TA or some client application it's enough to rebuild with: make buildroot and then run it with: make run-only A new UUID can be obtained with the Linux command uuidgen. Cheers, Jens > > I understand that these must be trivial questions, however, I will deeply appreciate if you can help me in figuring them out. > > > Best, > > Saad > -- > OP-TEE mailing list > OP-TEE(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/op-tee

5 years, 11 months

2
2
0 0

[PATCH v2 0/2] optee: SHM handling fixes

by Volodymyr Babchuk

There are two patches that previously was mailed separatedly. Both patches fix issues found during testing the OP-TEE 3.9 release. Julien and Stefano suggested to include this patches in Xen 4.14 release, because optee support still in the preview state and those patches provide no new functionality, bugfixes only. Volodymyr Babchuk (2): optee: immediately free buffers that are released by OP-TEE optee: allow plain TMEM buffers with NULL address xen/arch/arm/tee/optee.c | 59 +++++++++++++++++++++++++++++++++++----- 1 file changed, 52 insertions(+), 7 deletions(-) -- 2.26.2

5 years, 11 months

4
10
0 0

New TrustedFirmware.org security incident process is now live

by Dan Handley

Hi all The new TrustedFirmware.org security incident process is now live. This process is described here: https://developer.trustedfirmware.org/w/collaboration/security_center/repor… Initially the process will be used for the following projects: TF-A, TF-M, OP-TEE and Mbed TLS. The security documentation for each project will be updated soon to reflect this change. If you are part of an organization that believes it should receive security vulnerability information before it is made public then please ask your relevant colleagues to register as Trusted Stakeholders as described here: https://developer.trustedfirmware.org/w/collaboration/security_center/trust… Note we prefer individuals in each organization to coordinate their registration requests with each other and to provide us with an email alias managed by your organization instead of us managing a long list of individual addresses. Best regards Dan. (on behalf of the TrustedFirmware.org security team)

5 years, 11 months

1
0
0 0

[op-tee] [PATCH v2] Documentation: tee: Document TEE kernel interface

by Sumit Garg

Update documentation with TEE bus infrastructure which provides an interface for kernel client drivers to communicate with corresponding Trusted Application. Signed-off-by: Sumit Garg <sumit.garg(a)linaro.org> --- Changes in v2: - Add TEE client driver example snippet. Documentation/tee.txt | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/Documentation/tee.txt b/Documentation/tee.txt index c8fad81..350dd40 100644 --- a/Documentation/tee.txt +++ b/Documentation/tee.txt @@ -53,6 +53,66 @@ clients, forward them to the TEE and send back the results. In the case of supplicants the communication goes in the other direction, the TEE sends requests to the supplicant which then sends back the result. +The TEE kernel interface +======================== + +Kernel provides a TEE bus infrastructure where a Trusted Application is +represented as a device identified via Universally Unique Identifier (UUID) and +client drivers register a table of supported device UUIDs. + +TEE bus infrastructure registers following APIs: +- match(): iterates over the client driver UUID table to find a corresponding + match for device UUID. If a match is found, then this particular device is + probed via corresponding probe API registered by the client driver. This + process happens whenever a device or a client driver is registered with TEE + bus. +- uevent(): notifies user-space (udev) whenever a new device is registered on + TEE bus for auto-loading of modularized client drivers. + +TEE bus device enumeration is specific to underlying TEE implementation, so it +is left open for TEE drivers to provide corresponding implementation. + +Then TEE client driver can talk to a matched Trusted Application using APIs +listed in include/linux/tee_drv.h. + +TEE client driver example +------------------------- + +Suppose a TEE client driver needs to communicate with a Trusted Application +having UUID: ``ac6a4085-0e82-4c33-bf98-8eb8e118b6c2``, so driver registration +snippet would look like:: + + static const struct tee_client_device_id client_id_table[] = { + {UUID_INIT(0xac6a4085, 0x0e82, 0x4c33, + 0xbf, 0x98, 0x8e, 0xb8, 0xe1, 0x18, 0xb6, 0xc2)}, + {} + }; + + MODULE_DEVICE_TABLE(tee, client_id_table); + + static struct tee_client_driver client_driver = { + .id_table = client_id_table, + .driver = { + .name = DRIVER_NAME, + .bus = &tee_bus_type, + .probe = client_probe, + .remove = client_remove, + }, + }; + + static int __init client_init(void) + { + return driver_register(&client_driver.driver); + } + + static void __exit client_exit(void) + { + driver_unregister(&client_driver.driver); + } + + module_init(client_init); + module_exit(client_exit); + OP-TEE driver ============= @@ -112,6 +172,14 @@ kernel are handled by the kernel driver. Other RPC messages will be forwarded to tee-supplicant without further involvement of the driver, except switching shared memory buffer representation. +OP-TEE device enumeration +------------------------- + +OP-TEE provides a pseudo Trusted Application: drivers/tee/optee/device.c in +order to support device enumeration. In other words, OP-TEE driver invokes this +application to retrieve a list of Trusted Applications which can be registered +as devices on the TEE bus. + AMD-TEE driver ============== -- 2.7.4

6 years

4
5
0 0

OP-TEE Development Guidance

by Muhammad Saad

Hello All, First, I hope you are safe and doing fine in the unfortunate COVID-19 situation. I am a Ph.D. student at the University of Central Florida. Currently, I am working on a TEE-based prototype application for a proof-of-concept. Since I am totally new in this domain, so it is taking some effort. I have a few questions and I hope you guys can help me in that. At present, I am able to set up OP-TEE on Qemu and run the examples on the normal world and the secure world. Additionally, I tweaked a few parameters (ie., the integer value in the main.c) for the CA and the addition and subtraction sequence in the TA. Upon building it again (cd/build/make all run), it seems to work. However, if I need to pass a normal string to the TA and the TA computes Sha256 of the string and returns the value, what steps do I need to take? In other words, how can I pass a tuple from the TA to the CA and obtain the Hash of the tuple. Additionally, if I am able to do that by tailoring the HelloWorld examples, how can I develop new CA and TA with unique UUID and perform the same procedure. Finally, instead of doing the entire (cd/build/make all run), is there a method by which I can simply build the application and alone and run it on Qemu? I understand that these must be trivial questions, however, I will deeply appreciate if you can help me in figuring them out. Best, Saad

6 years

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

OP-TEE