January 2026 - OP-TEE - lists.trustedfirmware.org

[PATCH v20 0/6] Introduction of a remoteproc tee to load signed firmware

by Arnaud Pouliquen

Main updates from version V19[3]: -------------------------------- The devicetree is now structured as follows: firmware { optee { compatible = "linaro,optee-tz"; method = "smc"; #address-cells = <1>; #size-cells = <0>; rproc-service@0 { compatible = "rproc-service-80a4c275-0a47-4905-8285-1486a9771a08"; reg = <0>; #address-cells = <1>; #size-cells = <0>; status = "okay"; m4: m4@0 { compatible = "st,stm32mp15-m4-tee"; reg = <0>; mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; mbox-names = "vq0", "vq1", "shutdown"; memory-region = <&vdev0vring0>, <&m_ipc_shm>, <&mcuram2>, <&vdev0vring1>, <&vdev0buffer>, <&retram>; interrupt-parent = <&exti>; interrupts = <68 1>; status = "okay"; }; }; }; }; As a consequence, this version: - Introduces a new stm32_rproc_tee.c remoteproc driver. Instead of further complicating the existing stm32_rproc.c driver, a dedicated TEE-based driver is added. Both drivers are intended to also support the STM32MP2x Cortex-M33 remote processor in a next step. - Reworks the bindings: - Drop the st,stm32-rproc.yaml updates that were introduced in previous revisions. - Add remoteproc-tee.yaml for the "rproc-service-80a4c275-0a47-4905-8285-1486a9771a08" compatible. - Add st,stm32-rproc-tee.yaml for the "st,stm32mp15-m4-tee" compatible. - Reworks the probing sequence: The m4@0 device is now probed by the remoteproc-tee driver, which itself is instantiated by the TEE (OP-TEE) bus. Main updates from version V18[2]: -------------------------------- - rework documentation for the release_fw ops - rework function documentation in remoteproc_tee.c - replace spinlock by mutex and generalize usage in remoteproc_tee.c Main updates from version V17[1]: -------------------------------- - Fix: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing More details are available in each patch commit message. [1] https://lore.kernel.org/linux-remoteproc/20250613091650.2337411-1-arnaud.po… [2] https://lore.kernel.org/linux-remoteproc/20250616075530.4106090-1-arnaud.po… [3] https://lore.kernel.org/linux-devicetree/20250625094028.758016-1-arnaud.pou… Tested-on: --------- commit 7d0a66e4bb90 ("Linux 6.18") Description of the feature: -------------------------- This series proposes the implementation of a remoteproc tee driver to communicate with a TEE trusted application responsible for authenticating and loading the remoteproc firmware image in an Arm secure context. 1) Principle: The remoteproc tee driver provides services to communicate with the OP-TEE trusted application running on the Trusted Execution Context (TEE). The trusted application in TEE manages the remote processor lifecycle: - authenticating and loading firmware images, - isolating and securing the remote processor memories, - supporting multi-firmware (e.g., TF-M + Zephyr on a Cortex-M33), - managing the start and stop of the firmware by the TEE. 2) Format of the signed image: Refer to: https://github.com/OP-TEE/optee_os/blob/master/ta/remoteproc/src/remoteproc… 3) OP-TEE trusted application API: Refer to: https://github.com/OP-TEE/optee_os/blob/master/ta/remoteproc/include/ta_rem… 4) OP-TEE signature script Refer to: https://github.com/OP-TEE/optee_os/blob/master/scripts/sign_rproc_fw.py Example of usage: sign_rproc_fw.py --in <fw1.elf> --in <fw2.elf> --out <signed_fw.sign> --key ${OP-TEE_PATH}/keys/default.pem 5) Impact on User space Application No sysfs impact. The user only needs to provide the signed firmware image instead of the ELF image. For more information about the implementation, a presentation is available here (note that the format of the signed image has evolved between the presentation and the integration in OP-TEE). https://resources.linaro.org/en/resource/6c5bGvZwUAjX56fvxthxds Arnaud Pouliquen (6): dt-bindings: firmware: Add TEE remoteproc service binding dt-bindings: remoteproc: Add STM32 TEE-controlled rproc binding remoteproc: core: Introduce rproc_pa_to_va helper remoteproc: Introduce optional release_fw operation remoteproc: Add TEE support remoteproc: stm32: Add TEE-controlled STM32 driver .../arm/firmware/linaro,optee-tz.yaml | 6 + .../bindings/remoteproc/remoteproc-tee.yaml | 47 ++ .../remoteproc/st,stm32-rproc-tee.yaml | 100 +++ drivers/remoteproc/Kconfig | 10 + drivers/remoteproc/Makefile | 3 +- drivers/remoteproc/remoteproc_core.c | 52 ++ drivers/remoteproc/remoteproc_internal.h | 6 + drivers/remoteproc/remoteproc_tee.c | 771 ++++++++++++++++++ drivers/remoteproc/stm32_rproc_tee.c | 526 ++++++++++++ include/linux/remoteproc.h | 6 + include/linux/remoteproc_tee.h | 89 ++ 11 files changed, 1615 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/remoteproc/remoteproc-tee.yaml create mode 100644 Documentation/devicetree/bindings/remoteproc/st,stm32-rproc-tee.yaml create mode 100644 drivers/remoteproc/remoteproc_tee.c create mode 100644 drivers/remoteproc/stm32_rproc_tee.c create mode 100644 include/linux/remoteproc_tee.h base-commit: 7d0a66e4bb9081d75c82ec4957c50034cb0ea449 -- 2.43.0

5 days, 12 hours

4
17
0 0

[PATCH v4] arm64: defconfig: Enable QCOMTEE module for QTEE-enabled Qualcomm SoCs

by Harshal Dev

All Qualcomm SoCs starting from SM8650 provide access to the Qualcomm Trusted Execution Environment (QTEE) through the SMCInvoke interface, implemented by the QCOMTEE driver. QTEE runs in the Secure World domain on ARM64 CPUs and exposes secure services to Linux running in the Normal World domain. This change enables the QCOMTEE driver as a module to support communication with QTEE. QCOMTEE has been tested on a Qualcomm RB3Gen2 board by loading and executing a Trusted Application via tests hosted at github.com/qualcomm/minkipc. Signed-off-by: Harshal Dev <harshal.dev(a)oss.qualcomm.com> --- Changes in v4: - Updated the commit message as per discussion to clarify the following: - Why we are enabling QCOMTEE for all arm64 boards. - From which Qualcomm SoC onwards the driver is applicable. - What functionality the driver provides. - How the functionality has been tested and on which board. - Link to v3: https://lore.kernel.org/r/20251208-qcom_qcomtee_defconfig-v3-1-b50dcf8ab45e… Changes in v3: - Updated the commit message to reflect the supported Qualcomm platforms. - Link to v2: https://lore.kernel.org/r/20251205-qcom_qcomtee_defconfig-v2-1-c92560b0346e… Changes in v2: - Updated CONFIG_QCOMTEE flag to 'm' since QCOMTEE can be built as a module. - Link to v1: https://lore.kernel.org/r/20251202-qcom_qcomtee_defconfig-v1-1-11bfe40a8ea4… --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index cdb7d69e3b24..e952d24bef77 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1789,6 +1789,7 @@ CONFIG_FPGA_MGR_ZYNQMP_FPGA=m CONFIG_FPGA_MGR_VERSAL_FPGA=m CONFIG_TEE=y CONFIG_OPTEE=y +CONFIG_QCOMTEE=m CONFIG_MUX_GPIO=m CONFIG_MUX_MMIO=y CONFIG_SLIMBUS=m --- base-commit: 47b7b5e32bb7264b51b89186043e1ada4090b558 change-id: 20251202-qcom_qcomtee_defconfig-8dc0fed1411b Best regards, -- Harshal Dev <harshal.dev(a)oss.qualcomm.com>

1 week, 1 day

5
11
0 0

[PATCH v2] tee: shm: fix slab page refcounting

by Marco Felsch

Skip manipulating the refcount in case of slab pages according commit b9c0e49abfca ("mm: decline to manipulate the refcount on a slab page"). Fixes: b9c0e49abfca ("mm: decline to manipulate the refcount on a slab page") Signed-off-by: Marco Felsch <m.felsch(a)pengutronix.de> --- v2: - Make use of page variable v1: - https://lore.kernel.org/all/20250325195021.3589797-1-m.felsch@pengutronix.d… drivers/tee/tee_shm.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c index daf6e5cfd59a..35f0ac359b12 100644 --- a/drivers/tee/tee_shm.c +++ b/drivers/tee/tee_shm.c @@ -19,16 +19,24 @@ static void shm_put_kernel_pages(struct page **pages, size_t page_count) { size_t n; - for (n = 0; n < page_count; n++) - put_page(pages[n]); + for (n = 0; n < page_count; n++) { + struct page *page = pages[n]; + + if (!PageSlab(page)) + put_page(page); + } } static void shm_get_kernel_pages(struct page **pages, size_t page_count) { size_t n; - for (n = 0; n < page_count; n++) - get_page(pages[n]); + for (n = 0; n < page_count; n++) { + struct page *page = pages[n]; + + if (!PageSlab(page)) + get_page(page); + } } static void release_registered_pages(struct tee_shm *shm) -- 2.39.5

1 week, 1 day

5
17
0 0

[PATCH 0/3] OP-TEE/OP-TEE drivers: simplify context matches

by Rouven Czerwinski via B4 Relay

Both the OP-TEE core and some OP-TEE drivers use an if/else expression to check a boolean which can instead be returned directly. Implement this change. --- Rouven Czerwinski (3): optee: simplify OP-TEE context match hwrng: optee - simplify OP-TEE context match rtc: optee: simplify OP-TEE context match drivers/char/hw_random/optee-rng.c | 5 +---- drivers/rtc/rtc-optee.c | 5 +---- drivers/tee/optee/device.c | 5 +---- 3 files changed, 3 insertions(+), 12 deletions(-) --- base-commit: 63804fed149a6750ffd28610c5c1c98cce6bd377 change-id: 20260126-optee-simplify-context-match-d5b3467bfacc Best regards, -- Rouven Czerwinski <rouven.czerwinski(a)linaro.org>

2 weeks

5
7
0 0

[PATCH v3] tee: optee: prevent use-after-free when the client exits before the supplicant

by Amirreza Zarrabi

Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the client wait as killable so it can be interrupted during shutdown or after a supplicant crash. This changes the original lifetime expectations: the client task can now terminate while the supplicant is still processing its request. If the client exits first it removes the request from its queue and kfree()s it, while the request ID remains in supp->idr. A subsequent lookup on the supplicant path then dereferences freed memory, leading to a use-after-free. Serialise access to the request with supp->mutex: * Hold supp->mutex in optee_supp_recv() and optee_supp_send() while looking up and touching the request. * Let optee_supp_thrd_req() notice that the client has terminated and signal optee_supp_send() accordingly. With these changes the request cannot be freed while the supplicant still has a reference, eliminating the race. Fixes: 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi(a)oss.qualcomm.com> --- Changes in v3: - Introduce processed flag instead of -1 for req->id. - Update optee_supp_release() as reported by Michael Wu. - Use mutex instead of guard. - Link to v2: https://lore.kernel.org/r/20250617-fix-use-after-free-v2-1-1fbfafec5917@oss… Changes in v2: - Replace the static variable with a sentinel value. - Fix the issue with returning the popped request to the supplicant. - Link to v1: https://lore.kernel.org/r/20250605-fix-use-after-free-v1-1-a70d23bff248@oss… --- drivers/tee/optee/supp.c | 122 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 86 insertions(+), 36 deletions(-) diff --git a/drivers/tee/optee/supp.c b/drivers/tee/optee/supp.c index d0f397c90242..0ec66008df19 100644 --- a/drivers/tee/optee/supp.c +++ b/drivers/tee/optee/supp.c @@ -10,7 +10,11 @@ struct optee_supp_req { struct list_head link; + int id; + bool in_queue; + bool processed; + u32 func; u32 ret; size_t num_params; @@ -19,6 +23,9 @@ struct optee_supp_req { struct completion c; }; +/* It is temporary request used for invalid pending request in supp->idr. */ +#define INVALID_REQ_PTR ((struct optee_supp_req *)ERR_PTR(-ENOENT)) + void optee_supp_init(struct optee_supp *supp) { memset(supp, 0, sizeof(*supp)); @@ -46,6 +53,10 @@ void optee_supp_release(struct optee_supp *supp) /* Abort all request retrieved by supplicant */ idr_for_each_entry(&supp->idr, req, id) { idr_remove(&supp->idr, id); + /* Skip if request was already marked invalid */ + if (IS_ERR(req)) + continue; + req->ret = TEEC_ERROR_COMMUNICATION; complete(&req->c); } @@ -102,6 +113,7 @@ u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params, mutex_lock(&supp->mutex); list_add_tail(&req->link, &supp->reqs); req->in_queue = true; + req->processed = false; mutex_unlock(&supp->mutex); /* Tell an eventual waiter there's a new request */ @@ -117,21 +129,40 @@ u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params, if (wait_for_completion_killable(&req->c)) { mutex_lock(&supp->mutex); if (req->in_queue) { + /* Supplicant has not seen this request yet. */ list_del(&req->link); req->in_queue = false; + + ret = TEEC_ERROR_COMMUNICATION; + } else if (req->processed) { + /* + * Supplicant has processed this request. Ignore the + * kill signal for now and submit the result. + */ + ret = req->ret; + } else { + /* + * Supplicant is in the middle of processing this + * request. Replace req with INVALID_REQ_PTR so that + * the ID remains busy, causing optee_supp_send() to + * fail on the next call to supp_pop_req() with this ID. + */ + idr_replace(&supp->idr, INVALID_REQ_PTR, req->id); + ret = TEEC_ERROR_COMMUNICATION; } + mutex_unlock(&supp->mutex); - req->ret = TEEC_ERROR_COMMUNICATION; + } else { + ret = req->ret; } - ret = req->ret; kfree(req); return ret; } static struct optee_supp_req *supp_pop_entry(struct optee_supp *supp, - int num_params, int *id) + int num_params) { struct optee_supp_req *req; @@ -153,8 +184,8 @@ static struct optee_supp_req *supp_pop_entry(struct optee_supp *supp, return ERR_PTR(-EINVAL); } - *id = idr_alloc(&supp->idr, req, 1, 0, GFP_KERNEL); - if (*id < 0) + req->id = idr_alloc(&supp->idr, req, 1, 0, GFP_KERNEL); + if (req->id < 0) return ERR_PTR(-ENOMEM); list_del(&req->link); @@ -214,7 +245,6 @@ int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params, struct optee *optee = tee_get_drvdata(teedev); struct optee_supp *supp = &optee->supp; struct optee_supp_req *req = NULL; - int id; size_t num_meta; int rc; @@ -224,15 +254,48 @@ int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params, while (true) { mutex_lock(&supp->mutex); - req = supp_pop_entry(supp, *num_params - num_meta, &id); - mutex_unlock(&supp->mutex); - if (req) { - if (IS_ERR(req)) - return PTR_ERR(req); - break; + req = supp_pop_entry(supp, *num_params - num_meta); + if (!req) { + mutex_unlock(&supp->mutex); + goto wait_for_request; + } + + if (IS_ERR(req)) { + rc = PTR_ERR(req); + mutex_unlock(&supp->mutex); + + return rc; } + /* + * Process the request while holding the lock, so that + * optee_supp_thrd_req() doesn't pull the request from under us. + */ + + if (num_meta) { + /* + * tee-supplicant support meta parameters -> + * requests can be processed asynchronously. + */ + param->attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT | + TEE_IOCTL_PARAM_ATTR_META; + param->u.value.a = req->id; + param->u.value.b = 0; + param->u.value.c = 0; + } else { + supp->req_id = req->id; + } + + *func = req->func; + *num_params = req->num_params + num_meta; + memcpy(param + num_meta, req->param, + sizeof(struct tee_param) * req->num_params); + + mutex_unlock(&supp->mutex); + return 0; + +wait_for_request: /* * If we didn't get a request we'll block in * wait_for_completion() to avoid needless spinning. @@ -243,29 +306,10 @@ int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params, */ if (wait_for_completion_interruptible(&supp->reqs_c)) return -ERESTARTSYS; - } - if (num_meta) { - /* - * tee-supplicant support meta parameters -> requsts can be - * processed asynchronously. - */ - param->attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT | - TEE_IOCTL_PARAM_ATTR_META; - param->u.value.a = id; - param->u.value.b = 0; - param->u.value.c = 0; - } else { - mutex_lock(&supp->mutex); - supp->req_id = id; - mutex_unlock(&supp->mutex); + /* Check for the next request in the queue. */ } - *func = req->func; - *num_params = req->num_params + num_meta; - memcpy(param + num_meta, req->param, - sizeof(struct tee_param) * req->num_params); - return 0; } @@ -297,12 +341,18 @@ static struct optee_supp_req *supp_pop_req(struct optee_supp *supp, if (!req) return ERR_PTR(-ENOENT); + /* optee_supp_thrd_req() already returned to optee. */ + if (IS_ERR(req)) + goto failed_req; + if ((num_params - nm) != req->num_params) return ERR_PTR(-EINVAL); + *num_meta = nm; +failed_req: idr_remove(&supp->idr, id); supp->req_id = -1; - *num_meta = nm; + return req; } @@ -328,9 +378,8 @@ int optee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params, mutex_lock(&supp->mutex); req = supp_pop_req(supp, num_params, param, &num_meta); - mutex_unlock(&supp->mutex); - if (IS_ERR(req)) { + mutex_unlock(&supp->mutex); /* Something is wrong, let supplicant restart. */ return PTR_ERR(req); } @@ -355,9 +404,10 @@ int optee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params, } } req->ret = ret; - + req->processed = true; /* Let the requesting thread continue */ complete(&req->c); + mutex_unlock(&supp->mutex); return 0; } --- base-commit: 3f24e4edcd1b8981c6b448ea2680726dedd87279 change-id: 20250604-fix-use-after-free-8ff1b5d5d774 Best regards, -- Amirreza Zarrabi <amirreza.zarrabi(a)oss.qualcomm.com>

2 weeks

3
9
1 0

OP-TEE: memory corruption in scmi_pin_control_list_associations_handler()

by Dan Carpenter

When we do SCMI on OP-TEE, the in buffer and out buffer are the same buffer. I added some debug code to confirm this: diff --git a/module/msg_smt/src/mod_msg_smt.c b/module/msg_smt/src/mod_msg_smt.c index 853fe66b8d27..1e92dcd49c29 100644 --- a/module/msg_smt/src/mod_msg_smt.c +++ b/module/msg_smt/src/mod_msg_smt.c @@ -175,6 +175,11 @@ static int smt_write_payload(fwk_id_t channel_id, if (!channel_ctx->locked) return FWK_E_ACCESS; + FWK_LOG_ERR("OUT=%p IN=%p %s", + channel_ctx->out->payload, + channel_ctx->in->payload, + (channel_ctx->out->payload == channel_ctx->in->payload) ? "equal" : "different"); + memcpy(((uint8_t*)channel_ctx->out->payload) + offset, payload, size); return FWK_SUCCESS; And it's true: [ 0.000000] OUT=0x9c401004 IN=0x9c401004 equal This normally isn't a problem because we read a few inputs at the start of the function and then write out the result to the output at the end. But in the scmi_pin_control_list_associations_handler() it does a loop where each iteration reads from parameters->index which is input and writes to the output with scmi_pin_control_ctx.scmi_api->write_payload() and that corrupts the input data. Copying the input buffer to a the stack the issue for me, but I feel like it is a hack. It would be better to use separate buffers for input and output. I think this comes from: https://github.com/OP-TEE/optee_os/blob/master/core/kernel/pseudo_ta.c#L93 I added a print statement to there as well: diff --git a/core/kernel/pseudo_ta.c b/core/kernel/pseudo_ta.c index 587faa41a770..426870fb934c 100644 --- a/core/kernel/pseudo_ta.c +++ b/core/kernel/pseudo_ta.c @@ -90,6 +90,7 @@ static TEE_Result copy_in_param(struct ts_session *s __maybe_unused, va = NULL; } + EMSG("n=%lu va=%p", n, va); tee_param[n].memref.buffer = va; tee_param[n].memref.size = mem->size; break; E/TC:? 0 copy_in_param:93 n=1 va=0x9c401000 E/TC:? 0 copy_in_param:93 n=2 va=0x9c401000 Here is the patch to save "parameters" to a different buffer. --- .../scmi_pin_control/src/mod_scmi_pin_control.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/module/scmi_pin_control/src/mod_scmi_pin_control.c b/module/scmi_pin_control/src/mod_scmi_pin_control.c index a0b90dd2b73f..54e613b70f69 100644 --- a/module/scmi_pin_control/src/mod_scmi_pin_control.c +++ b/module/scmi_pin_control/src/mod_scmi_pin_control.c @@ -344,7 +344,7 @@ static int scmi_pin_control_list_associations_handler( fwk_id_t service_id, const uint32_t *payload) { - const struct scmi_pin_control_list_associations_a2p *parameters; + const struct scmi_pin_control_list_associations_a2p parameters; uint32_t payload_size; uint16_t identifiers_count; uint16_t total_number_of_associations; @@ -362,8 +362,9 @@ static int scmi_pin_control_list_associations_handler( payload_size = (uint32_t)sizeof(return_values); parameters = (const struct scmi_pin_control_list_associations_a2p *)payload; + memcpy(&parameters, payload, sizeof(parameters)); - status = map_identifier(parameters->identifier, &mapped_identifier); + status = map_identifier(parameters.identifier, &mapped_identifier); if (status != FWK_SUCCESS) { return_values.status = SCMI_NOT_FOUND; @@ -371,7 +372,7 @@ static int scmi_pin_control_list_associations_handler( } status = scmi_pin_control_ctx.pinctrl_api->get_total_number_of_associations( - mapped_identifier, parameters->flags, &total_number_of_associations); + mapped_identifier, parameters.flags, &total_number_of_associations); if (status != FWK_SUCCESS) { return_values.status = SCMI_NOT_FOUND; goto exit; @@ -388,11 +389,11 @@ static int scmi_pin_control_list_associations_handler( identifiers_count = (uint16_t)FWK_MIN( buffer_allowed_identifiers, - (uint16_t)(total_number_of_associations - parameters->index)); + (uint16_t)(total_number_of_associations - parameters.index)); return_values.flags = identifiers_count; return_values.flags |= SHIFT_LEFT_BY_POS( - (total_number_of_associations - parameters->index - identifiers_count), + (total_number_of_associations - parameters.index - identifiers_count), NUM_OF_REMAINING_ELEMENTS_POS); for (identifier_index = 0; identifier_index < identifiers_count; @@ -401,8 +402,8 @@ static int scmi_pin_control_list_associations_handler( status = scmi_pin_control_ctx.pinctrl_api->get_list_associations( mapped_identifier, - parameters->flags, - (parameters->index + identifier_index), + parameters.flags, + (parameters.index + identifier_index), &object_id); if (status != FWK_SUCCESS) { return_values.status = SCMI_NOT_FOUND; -- 2.51.0

2 weeks, 1 day

2
1
0 0

Linaro OP-TEE Contribution, LOC, monthly meeting January 27

by Jens Wiklander

Hi, Tomorrow, Tuesday, it's time for another LOC monthly meeting. For time and connection details, see the calendar at https://www.trustedfirmware.org/meetings/ - OP-TEE version 4.9.0 released - Following our discussion at the last LOC regarding exporting OP-TEE version information via sysfs, the latest version of the patch [1] has been accepted. - Any other topics? [1] https://lore.kernel.org/op-tee/20260112154833.78546-1-aristo.chen@canonical… Cheers, Jens

4 weeks, 1 day

1
0
0 0

Rebase linaro-swg/kernel to v6.18

by Jens Wiklander

Hi, I've just rebased the linaro-swg/kernel optee branch on v6.18 from v6.14. By rebasing, we eliminated a few workarounds on the optee branch and gained FF-A version 1.2 support in the kernel. Cheers, Jens

1 month

1
0
0 0

[PATCH][next] optee: make read-only array attr static const

by Colin Ian King

Don't populate the read-only array attr on the stack at run time, instead make it static const. Signed-off-by: Colin Ian King <coking(a)nvidia.com> --- drivers/tee/optee/rpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index 97fc5b14db0c..1758eb7e6e8b 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -43,7 +43,7 @@ static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, struct i2c_msg msg = { }; size_t i; int ret = -EOPNOTSUPP; - u8 attr[] = { + static const u8 attr[] = { TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT, -- 2.51.0

1 month, 1 week

7
7
0 0

[GIT PULL] TEE sysfs for 6.20

by Jens Wiklander

Hello arm-soc maintainers, Please pull these two patches adding a generic TEE revision sysfs attribute and implement support for OP-TEE. Thanks, Jens The following changes since commit 8f0b4cce4481fb22653697cced8d0d04027cb1e8: Linux 6.19-rc1 (2025-12-14 16:05:07 +1200) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee.git tags/tee-sysfs-for-6.20 for you to fetch changes up to c19faf5a62315d5e0e65dde49b7b59e30330b9c2: tee: optee: store OS revision for TEE core (2026-01-15 10:35:14 +0100) ---------------------------------------------------------------- TEE sysfs for 6.20 - Add an optional generic sysfs attribute for TEE revision - Implement revision reporting for OP-TEE using both SMC and FF-A ABIs ---------------------------------------------------------------- Aristo Chen (2): tee: add revision sysfs attribute tee: optee: store OS revision for TEE core Documentation/ABI/testing/sysfs-class-tee | 10 ++++++ drivers/tee/optee/core.c | 23 +++++++++++++ drivers/tee/optee/ffa_abi.c | 54 +++++++++++++++++++++++-------- drivers/tee/optee/optee_private.h | 19 +++++++++++ drivers/tee/optee/smc_abi.c | 15 +++++++-- drivers/tee/tee_core.c | 51 ++++++++++++++++++++++++++++- include/linux/tee_core.h | 9 ++++++ 7 files changed, 163 insertions(+), 18 deletions(-)

1 month, 1 week

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

OP-TEE January 2026