On Mon, Feb 22, 2021 at 12:45:18PM +0530, Sumit Garg wrote:
On Tue, 16 Feb 2021 at 12:59, Jarkko Sakkinen jarkko@kernel.org wrote:
On Mon, Feb 15, 2021 at 06:37:00PM +0530, Sumit Garg wrote:
On Fri, 12 Feb 2021 at 05:04, Jarkko Sakkinen jarkko@kernel.org wrote:
On Mon, Jan 25, 2021 at 02:47:38PM +0530, Sumit Garg wrote:
Hi Jarkko,
On Fri, 22 Jan 2021 at 23:42, Jarkko Sakkinen jarkko@kernel.org wrote:
On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > >>> > >>> > >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen jarkko@kernel.org wrote: > >>>>>> > >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen jarkko@kernel.org wrote: > >>>>>>>>> > >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > >>>>>>>>>> Hi Jarkko, > >>>>>>>>>> > >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen jarkko@kernel.org wrote: > >>>>>>>>>>> > >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. > >>>>>>>>>>>> > >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > >>>>>>>>>>>> > >>>>>>>>>>>> Signed-off-by: Sumit Garg sumit.garg@linaro.org > >>>>>>>>>>> > >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > >>>>>>>>>>> just a blank screen: > >>>>>>>>>>> > >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > >>>>>>>>>>> > >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > >>>>>>>>>>> > >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > >>>>>>>>>>> > >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > >>>>>>>>>>> in the master branch. > >>>>>>>>>>> > >>>>>>>>>>> To create identical images you just need to > >>>>>>>>>>> > >>>>>>>>>>> $ make tpmdd_defconfig && make > >>>>>>>>>>> > >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run > >>>>>>>>>>> aarch64 environment available. > >>>>>>>>>> > >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test > >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > >>>>>>>>>> system [2]. And then it would be easier to migrate them to your > >>>>>>>>>> buildroot environment as well. > >>>>>>>>>> > >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > >>>>>>>>>> > >>>>>>>>>> -Sumit > >>>>>>>>> > >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > >>>>>>>>> > >>>>>>>> > >>>>>>>> $ cat keyctl_change > >>>>>>>> diff --git a/common.mk b/common.mk > >>>>>>>> index aeb7b41..663e528 100644 > >>>>>>>> --- a/common.mk > >>>>>>>> +++ b/common.mk > >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > >>>>>>>> BR2_PACKAGE_STRACE ?= y > >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > >>>>>>>> +BR2_PACKAGE_KEYUTILS := y > >>>>>>>> > >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to > >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > >>>>>>>> index 368c18a..832ab74 100644 > >>>>>>>> --- a/kconfigs/qemu.conf > >>>>>>>> +++ b/kconfigs/qemu.conf > >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y > >>>>>>>> CONFIG_HW_RANDOM=y > >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y > >>>>>>>> +CONFIG_TRUSTED_KEYS=y > >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y > >>>>>>>> > >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the > >>>>>>>>> specification. > >>>>>>>>> > >>>>>>>> > >>>>>>>> Sure, I will roll out the next version after your testing. > >>>>>>> > >>>>>>> Thanks, I'll try this at instant, and give my feedback. > >>>>>> > >>>>>> I bump into this: > >>>>>> > >>>>>> $ make run-only > >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > >>>>>> make: *** [Makefile:194: run-only] Error 1 > >>>>>> > >>>>> > >>>>> Could you check if the following directory tree is built after > >>>>> executing the below command? > >>>>> > >>>>> $ make -j`nproc` > >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > >>>>> > >>>>> $ tree out/bin/ > >>>>> out/bin/ > >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > >>>>> ├── bl31.bin -> > >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > >>>>> ├── bl32.bin -> > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > >>>>> ├── bl32_extra1.bin -> > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > >>>>> ├── bl32_extra2.bin -> > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > >>>>> ├── bl33.bin -> > >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > >>>>> └── rootfs.cpio.gz -> > >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > >>>>> > >>>>> 0 directories, 9 files > >>>>> > >>>>> -Sumit > >>>> > >>>> I actually spotted a build error that was unnoticed last time: > >>>> > >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > >>>> /bin/sh: 1: python: not found > >>>> > >>>> I'd prefer not to install Python2. It has been EOL over a year. > >>> > >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > >>> machine, this is accomplished by installing package "python-is-python3" > >>> (after uninstalling "python-is-python2" if need be). > >>> > >>> $ ls -l /usr/bin/python > >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > >> > >> Right, just found about this in unrelated context :-) [*] > >> > >> Hope this will work out... > >> > >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > Now I get > > > > Traceback (most recent call last): > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > allTests = GetAllTestsSuite() > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > import CToolsTests > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > import TianoCompress > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > for name, item in localItems.iteritems(): > > AttributeError: 'dict' object has no attribute 'iteritems' > > Right. Same here after removing all traces of Python2 from my system :-/ > > A couple of fixes are needed: > 1. EDK2 needs to be upgraded to tag or later [1] > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > [1] https://github.com/OP-TEE/manifest/pull/177 > [2] https://github.com/OP-TEE/build/pull/450
BTW, Is to *really* impossible to test this with plain BuildRoot. It's obvious that this forks BR internally.
I mean even if I get this working once, this will feels like a clumsy way to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And it would be nice to be able to start doing regular ARM testing.
The main reason to guide you towards the OP-TEE build system is that you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) from source. If you don't need to rebuild those then I have prepared a flash firmware binary blob for your testing (attached flash.bin). So Qemu cmdline will look like:
$ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu cortex-a57 -kernel out/bin/Image -no-acpi -append 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp
I spentt couple of days to try to get this running.
Here's the log:
❯ ./qemu.sh NOTICE: Booting Trusted Firmware NOTICE: BL1: v2.3():v2.3 NOTICE: BL1: Built : 13:28:04, Jan 25 2021 NOTICE: BL1: Booting BL2 NOTICE: BL2: v2.3():v2.3 NOTICE: BL2: Built : 13:28:06, Jan 25 2021 NOTICE: BL1: Booting BL31 NOTICE: BL31: v2.3():v2.3 NOTICE: BL31: Built : 13:28:08, Jan 25 2021 UEFI firmware (version built at 18:49:27 on Nov 18 2019) pflash_write: Write to buffer emulation is flawed pflash_write: Write to buffer emulation is flawed EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map... Booting Linux on physical CPU 0x0000000000 [0x411fd070] Linux version 5.11.0-rc5 (jarkko@suppilovahvero) (aarch64-buildroot-linux-uclibc-gcc.br_real (Buildroot 2021.02-rc1-10-ga72c90b972) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP Thu Feb 11 22:04:53 EET 2021 Machine model: linux,dummy-virt efi: EFI v2.70 by EDK II efi: SMBIOS=0x7f520000 SMBIOS 3.0=0x7f500000 MEMATTR=0x7e59b018 MEMRESERVE=0x7c143f18 Zone ranges: DMA [mem 0x0000000040000000-0x000000007fffffff] DMA32 empty Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000040000000-0x0000000041ffffff] node 0: [mem 0x0000000042200000-0x000000007be3ffff] node 0: [mem 0x000000007be40000-0x000000007c13ffff] node 0: [mem 0x000000007c140000-0x000000007f41ffff] node 0: [mem 0x000000007f420000-0x000000007f4affff] node 0: [mem 0x000000007f4b0000-0x000000007f4cffff] node 0: [mem 0x000000007f4d0000-0x000000007f5dffff] node 0: [mem 0x000000007f5e0000-0x000000007fffffff] Zeroed struct page in unavailable ranges: 864 pages Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: Trusted OS migration not required psci: SMC Calling Convention v1.2 percpu: Embedded 21 pages/cpu s48024 r8192 d29800 u86016 Detected PIPT I-cache on CPU0 CPU features: detected: ARM erratum 832075 CPU features: detected: Spectre-v2 CPU features: detected: ARM errata 1165522, 1319367, or 1530923 Built 1 zonelists, mobility grouping on. Total pages: 257536 Kernel command line: root=/dev/vda rw console=ttyAMA0,115200 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 1011284K/1046528K available (6592K kernel code, 804K rwdata, 1460K rodata, 1088K init, 321K bss, 35244K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 rcu: Hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] random: get_random_bytes called from start_kernel+0x340/0x53c with crng_init=0 arch_timer: cp15 timer(s) running at 62.50MHz (virt). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) rcu: Hierarchical SRCU implementation. Remapping and enabling EFI services. smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 1 CPU SMP: Total of 1 processors activated. CPU features: detected: 32-bit EL0 Support CPU features: detected: CRC32 instructions CPU: All CPU(s) started at EL1 alternatives: patching kernel code devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 2, 16384 bytes, linear) SMBIOS 3.0.0 present. DMI: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 NET: Registered protocol family 16 DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. ASID allocator initialised with 65536 entries Serial: AMBA PL011 UART driver 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 46, base_baud = 0) is a PL011 rev1 printk: console [ttyAMA0] enabled iommu: Default domain type: Translated vgaarb: loaded SCSI subsystem initialized Registered efivars operations clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 2, 16384 bytes, linear) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) NET: Registered protocol family 1 PCI: CLS 0 bytes, default 64 hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available workingset: timestamp_bits=62 max_order=18 bucket_order=0 fuse: init (API version 7.33) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler mq-deadline registered io scheduler kyber registered pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 pci 0000:00:01.0: reg 0x10: [io 0x0080-0x009f] pci 0000:00:01.0: reg 0x14: [mem 0x10001000-0x10001fff] pci 0000:00:01.0: reg 0x20: [mem 0x8000000000-0x8000003fff 64bit pref] pci 0000:00:01.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] pci 0000:00:02.0: [1af4:1001] type 00 class 0x010000 pci 0000:00:02.0: reg 0x10: [io 0x0000-0x007f] pci 0000:00:02.0: reg 0x14: [mem 0x10000000-0x10000fff] pci 0000:00:02.0: reg 0x20: [mem 0x8000004000-0x8000007fff 64bit pref] pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] pci 0000:00:02.0: BAR 0: assigned [io 0x1000-0x107f] pci 0000:00:01.0: BAR 0: assigned [io 0x1080-0x109f] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) cacheinfo: Unable to detect cache hierarchy for CPU 0 virtio_blk virtio1: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB) SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 40 registered taskstats version 1 EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. VFS: Mounted root (ext4 filesystem) on device 254:0. devtmpfs: mounted Freeing unused kernel memory: 1088K Run /sbin/init as init process mount: you must be root mount: you must be root mkdir: can't create directory '/dev/pts': Permission denied mkdir: can't create directory '/dev/shm': Permission denied mount: you must be root hostname: sethostname: Operation not permitted Starting syslogd: OK Starting klogd: OK Running sysctl: OK Initializing random number generator: OK Saving random seed: random: dd: uninitialized urandom read (512 bytes read) OK Starting network: ip: RTNETLINK answers: Operation not permitted ip: SIOCSIFFLAGS: Operation not permitted sed: /proc/mounts: No such file or directory Waiting for interface eth0 to appear............... timeout! run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1 FAIL can't open /dev/ttyAMA0: Permission denied can't open /dev/ttyAMA0: Permission denied can't open /dev/ttyAMA0: Permission denied can't open /dev/ttyAMA0: Permission denied
And it continues...
The qemu command I got did not work "as it is" and because I'm neither too proficient with qemu nor aarch64, it took a while to get something usable. This is my current qemu command:
qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu cortex-a57 \ -kernel ~/Projects/tpm/buildroot/output/images/Image \ -no-acpi \ -append 'root=/dev/vda rw console=ttyAMA0,115200 ' \ -drive file=~/Projects/tpm/buildroot/output/images/rootfs.ext4,format=raw \ -smp 1 \ -monitor telnet:127.0.0.1:55555,server,nowait \ -m 1024 -bios ~/Projects/tpm/fw/aarch64-fw.bin -d unimp
Then I start QEMU monitor from another terminal with:
socat tcp-connect:127.0.0.1:55555 file:`tty`,raw,echo=0
So... what could be the issue with permissions?
It mostly sounds like an issue with your buildroot filesystem.
Can you try with this [1] init ramdisk instead?
-initrd rootfs.cpio.gz
[1] https://people.linaro.org/~sumit.garg/rootfs.cpio.gz
-Sumit
That does not include my LKM's.
You can give a try with my kernel image [1] which has required built in kernel modules. Also, you should be able to build a similar kernel image.
It comes down to that I need to be able to build my own kernel and user space.
I need to be able to build my own kernel. There's been some bugs that I've reported back to BuildRoot with the latest kernel tree and also with binutils [*].
I'll retry once they are fixed, and try to find out what it causing the problem.
[*] https://bugs.busybox.net/show_bug.cgi?id=13546
/Jarkko