Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and use an RPMB device via the RPMB subsystem instead of passing the RPMB frames via tee-supplicant in user space. A fallback mechanism is kept to route RPMB frames via tee-supplicant if the RPMB subsystem isn't available.
The OP-TEE RPC ABI is extended to support iterating over all RPMB devices until one is found with the expected RPMB key already programmed.
Signed-off-by: Jens Wiklander jens.wiklander@linaro.org --- drivers/tee/optee/core.c | 30 ++++ drivers/tee/optee/device.c | 7 + drivers/tee/optee/ffa_abi.c | 8 ++ drivers/tee/optee/optee_private.h | 21 ++- drivers/tee/optee/optee_rpc_cmd.h | 35 +++++ drivers/tee/optee/rpc.c | 232 ++++++++++++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 7 + 7 files changed, 339 insertions(+), 1 deletion(-)
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index 3aed554bc8d8..082691c10a90 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -11,6 +11,7 @@ #include <linux/io.h> #include <linux/mm.h> #include <linux/module.h> +#include <linux/rpmb.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/tee_drv.h> @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm, shm->pages = NULL; }
+void optee_bus_scan_rpmb(struct work_struct *work) +{ + struct optee *optee = container_of(work, struct optee, + rpmb_scan_bus_work); + int ret; + + if (!optee->rpmb_scan_bus_done) { + ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB); + optee->rpmb_scan_bus_done = !ret; + if (ret && ret != -ENODEV) + pr_info("Scanning for RPMB device: ret %d\n", ret); + } +} + +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, + void *data) +{ + struct optee *optee = container_of(intf, struct optee, rpmb_intf); + + if (action == RPMB_NOTIFY_ADD_DEVICE) + schedule_work(&optee->rpmb_scan_bus_work); + + return 0; +} + static void optee_bus_scan(struct work_struct *work) { WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP)); @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx)
void optee_remove_common(struct optee *optee) { + rpmb_interface_unregister(&optee->rpmb_intf); + cancel_work_sync(&optee->rpmb_scan_bus_work); /* Unregister OP-TEE specific client devices on TEE bus */ optee_unregister_devices();
@@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee) tee_shm_pool_free(optee->pool); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex); + rpmb_dev_put(optee->rpmb_dev); + mutex_destroy(&optee->rpmb_dev_mutex); }
static int smc_abi_rc; diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c index 4b1092127694..4274876857c8 100644 --- a/drivers/tee/optee/device.c +++ b/drivers/tee/optee/device.c @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session, ret = tee_client_invoke_func(ctx, &inv_arg, param); if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { + /* + * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting + * the list of device TAs that depends on RPMB but a usable + * RPMB device isn't found. + */ + if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE) + return -ENODEV; pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", inv_arg.ret); return -EINVAL; diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c index ecb5eb079408..a8dfdb30b4e8 100644 --- a/drivers/tee/optee/ffa_abi.c +++ b/drivers/tee/optee/ffa_abi.c @@ -7,6 +7,7 @@
#include <linux/arm_ffa.h> #include <linux/errno.h> +#include <linux/rpmb.h> #include <linux/scatterlist.h> #include <linux/sched.h> #include <linux/slab.h> @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) optee_cq_init(&optee->call_queue, 0); optee_supp_init(&optee->supp); optee_shm_arg_cache_init(optee, arg_cache_flags); + mutex_init(&optee->rpmb_dev_mutex); ffa_dev_set_drvdata(ffa_dev, optee); ctx = teedev_open(optee->teedev); if (IS_ERR(ctx)) { @@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) if (rc) goto err_unregister_devices;
+ INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; + rpmb_interface_register(&optee->rpmb_intf); pr_info("initialized driver\n"); return 0;
@@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) teedev_close_context(ctx); err_rhashtable_free: rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL); + rpmb_dev_put(optee->rpmb_dev); + mutex_destroy(&optee->rpmb_dev_mutex); + rpmb_interface_unregister(&optee->rpmb_intf); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex); mutex_destroy(&optee->ffa.mutex); diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 7a5243c78b55..ae72f3dda1d2 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -8,6 +8,7 @@
#include <linux/arm-smccc.h> #include <linux/rhashtable.h> +#include <linux/rpmb.h> #include <linux/semaphore.h> #include <linux/tee_drv.h> #include <linux/types.h> @@ -20,11 +21,13 @@ /* Some Global Platform error codes used in this driver */ #define TEEC_SUCCESS 0x00000000 #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008 #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A #define TEEC_ERROR_COMMUNICATION 0xFFFF000E #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C #define TEEC_ERROR_BUSY 0xFFFF000D #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003
#define TEEC_ORIGIN_COMMS 0x00000002
@@ -197,6 +200,12 @@ struct optee_ops { * @notif: notification synchronization struct * @supp: supplicant synchronization struct for RPC to supplicant * @pool: shared memory pool + * @mutex: mutex protecting @rpmb_dev + * @rpmb_dev: current RPMB device or NULL + * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices + * was already done + * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus + * and register RPMB dependent optee drivers * @rpc_param_count: If > 0 number of RPC parameters to make room for * @scan_bus_done flag if device registation was already done. * @scan_bus_work workq to scan optee bus and register optee drivers @@ -215,9 +224,15 @@ struct optee { struct optee_notif notif; struct optee_supp supp; struct tee_shm_pool *pool; + /* Protects rpmb_dev pointer */ + struct mutex rpmb_dev_mutex; + struct rpmb_dev *rpmb_dev; + struct notifier_block rpmb_intf; unsigned int rpc_param_count; - bool scan_bus_done; + bool scan_bus_done; + bool rpmb_scan_bus_done; struct work_struct scan_bus_work; + struct work_struct rpmb_scan_bus_work; };
struct optee_session { @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
#define PTA_CMD_GET_DEVICES 0x0 #define PTA_CMD_GET_DEVICES_SUPP 0x1 +#define PTA_CMD_GET_DEVICES_RPMB 0x2 int optee_enumerate_devices(u32 func); void optee_unregister_devices(void); +void optee_bus_scan_rpmb(struct work_struct *work); +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, + void *data);
int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm, size_t size, size_t align, diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h index f3f06e0994a7..f351a8ac69fc 100644 --- a/drivers/tee/optee/optee_rpc_cmd.h +++ b/drivers/tee/optee/optee_rpc_cmd.h @@ -16,6 +16,14 @@ * and sends responses. */
+/* + * Replay Protected Memory Block access + * + * [in] memref[0] Frames to device + * [out] memref[1] Frames from device + */ +#define OPTEE_RPC_CMD_RPMB 1 + /* * Get time * @@ -103,4 +111,31 @@ /* I2C master control flags */ #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0)
+/* + * Reset RPMB probing + * + * Releases an eventually already used RPMB devices and starts over searching + * for RPMB devices. Returns the kind of shared memory to use in subsequent + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls. + * + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for + * OPTEE_RPC_CMD_SHM_ALLOC + */ +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22 + +/* + * Probe next RPMB device + * + * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_* + * [out] value[0].b EXT CSD-slice 168 "RPMB Size" + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count" + * [out] memref[1] Buffer with the raw CID + */ +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23 + +/* Type of RPMB device */ +#define OPTEE_RPC_RPMB_EMMC 0 +#define OPTEE_RPC_RPMB_UFS 1 +#define OPTEE_RPC_RPMB_NVME 2 + #endif /*__OPTEE_RPC_CMD_H*/ diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index e69bc6380683..a3e4c1830f39 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -7,6 +7,7 @@
#include <linux/delay.h> #include <linux/i2c.h> +#include <linux/rpmb.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include "optee_private.h" @@ -255,6 +256,228 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m); }
+static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx, + struct optee *optee, + struct optee_msg_arg *arg) +{ + struct tee_param params[1]; + + if (!IS_ENABLED(CONFIG_RPMB)) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL; + params[0].u.value.b = 0; + params[0].u.value.c = 0; + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + mutex_lock(&optee->rpmb_dev_mutex); + rpmb_dev_put(optee->rpmb_dev); + optee->rpmb_dev = NULL; + mutex_unlock(&optee->rpmb_dev_mutex); + + arg->ret = TEEC_SUCCESS; +} + +static int rpmb_type_to_rpc_type(enum rpmb_type rtype) +{ + switch (rtype) { + case RPMB_TYPE_EMMC: + return OPTEE_RPC_RPMB_EMMC; + case RPMB_TYPE_UFS: + return OPTEE_RPC_RPMB_UFS; + case RPMB_TYPE_NVME: + return OPTEE_RPC_RPMB_NVME; + default: + return -1; + } +} + +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data) +{ + return rpmb_type_to_rpc_type(rdev->descr.type) >= 0; +} + +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx, + struct optee *optee, + struct optee_msg_arg *arg) +{ + struct rpmb_dev *rdev; + struct tee_param params[2]; + void *buf; + + if (!IS_REACHABLE(CONFIG_RPMB)) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT || + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + buf = tee_shm_get_va(params[1].u.memref.shm, + params[1].u.memref.shm_offs); + if (!buf) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + mutex_lock(&optee->rpmb_dev_mutex); + rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); + rpmb_dev_put(optee->rpmb_dev); + optee->rpmb_dev = rdev; + mutex_unlock(&optee->rpmb_dev_mutex); + + if (!rdev) { + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND; + return; + } + + if (params[1].u.memref.size < rdev->descr.dev_id_len) { + arg->ret = TEEC_ERROR_SHORT_BUFFER; + return; + } + memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len); + params[1].u.memref.size = rdev->descr.dev_id_len; + params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type); + params[0].u.value.b = rdev->descr.capacity; + params[0].u.value.c = rdev->descr.reliable_wr_count; + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + arg->ret = TEEC_SUCCESS; +} + +/* Request */ +struct rpmb_req { + u16 cmd; +#define RPMB_CMD_DATA_REQ 0x00 +#define RPMB_CMD_GET_DEV_INFO 0x01 + u16 dev_id; + u16 block_count; + /* Optional data frames (rpmb_data_frame) follow */ +}; + +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1)) + +#define RPMB_CID_SZ 16 + +/* Response to device info request */ +struct rpmb_dev_info { + u8 cid[RPMB_CID_SZ]; + u8 rpmb_size_mult; /* RPMB size in units of 128kB */ + u8 reliable_wr_count; /* RPMB write size in units of 256 bytes */ + u8 ret_code; +#define RPMB_CMD_GET_DEV_INFO_RET_OK 0x00 +#define RPMB_CMD_GET_DEV_INFO_RET_ERROR 0x01 +}; + +static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size) +{ + struct rpmb_dev_info *dev_info; + + if (rsp_size != sizeof(*dev_info)) + return TEEC_ERROR_BAD_PARAMETERS; + + dev_info = rsp; + memcpy(dev_info->cid, rdev->descr.dev_id, sizeof(dev_info->cid)); + dev_info->rpmb_size_mult = rdev->descr.capacity; + dev_info->reliable_wr_count = rdev->descr.reliable_wr_count; + dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK; + + return TEEC_SUCCESS; +} + +/* + * req is one struct rpmb_req followed by one or more struct rpmb_data_frame + * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame + */ +static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev, + void *req, size_t req_size, + void *rsp, size_t rsp_size) +{ + struct rpmb_req *sreq = req; + int rc; + + if (req_size < sizeof(*sreq)) + return TEEC_ERROR_BAD_PARAMETERS; + + switch (sreq->cmd) { + case RPMB_CMD_DATA_REQ: + rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req), + req_size - sizeof(struct rpmb_req), + rsp, rsp_size); + if (rc) + return TEEC_ERROR_BAD_PARAMETERS; + return TEEC_SUCCESS; + case RPMB_CMD_GET_DEV_INFO: + return get_dev_info(rdev, rsp, rsp_size); + default: + return TEEC_ERROR_BAD_PARAMETERS; + } +} + +static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee, + struct optee_msg_arg *arg) +{ + struct tee_param params[2]; + struct rpmb_dev *rdev; + void *p0, *p1; + + mutex_lock(&optee->rpmb_dev_mutex); + rdev = rpmb_dev_get(optee->rpmb_dev); + mutex_unlock(&optee->rpmb_dev_mutex); + if (!rdev) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT || + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + goto out; + } + + p0 = tee_shm_get_va(params[0].u.memref.shm, + params[0].u.memref.shm_offs); + p1 = tee_shm_get_va(params[1].u.memref.shm, + params[1].u.memref.shm_offs); + arg->ret = rpmb_process_request(optee, rdev, p0, + params[0].u.memref.size, + p1, params[1].u.memref.size); + if (arg->ret) + goto out; + + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) + arg->ret = TEEC_ERROR_BAD_PARAMETERS; +out: + rpmb_dev_put(rdev); +} + void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, struct optee_msg_arg *arg) { @@ -271,6 +494,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, case OPTEE_RPC_CMD_I2C_TRANSFER: handle_rpc_func_cmd_i2c_transfer(ctx, arg); break; + case OPTEE_RPC_CMD_RPMB_PROBE_RESET: + handle_rpc_func_rpmb_probe_reset(ctx, optee, arg); + break; + case OPTEE_RPC_CMD_RPMB_PROBE_NEXT: + handle_rpc_func_rpmb_probe_next(ctx, optee, arg); + break; + case OPTEE_RPC_CMD_RPMB: + handle_rpc_func_rpmb(ctx, optee, arg); + break; default: handle_rpc_supp_cmd(ctx, optee, arg); } diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c index a37f87087e5c..c23bcf35c8cb 100644 --- a/drivers/tee/optee/smc_abi.c +++ b/drivers/tee/optee/smc_abi.c @@ -20,6 +20,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/rpmb.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/string.h> @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev) optee->smc.memremaped_shm = memremaped_shm; optee->pool = pool; optee_shm_arg_cache_init(optee, arg_cache_flags); + mutex_init(&optee->rpmb_dev_mutex);
platform_set_drvdata(pdev, optee); ctx = teedev_open(optee->teedev); @@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev) if (rc) goto err_disable_shm_cache;
+ INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; + rpmb_interface_register(&optee->rpmb_intf); pr_info("initialized driver\n"); return 0;
@@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev) err_close_ctx: teedev_close_context(ctx); err_supp_uninit: + rpmb_dev_put(optee->rpmb_dev); + mutex_destroy(&optee->rpmb_dev_mutex); optee_shm_arg_cache_uninit(optee); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex);