Hi,
This patch set allocates the protected DMA-bufs from a DMA-heap instantiated from the TEE subsystem.
The TEE subsystem handles the DMA-buf allocations since it is the TEE (OP-TEE, AMD-TEE, TS-TEE, or perhaps a future QTEE) which sets up the protection for the memory used for the DMA-bufs.
The DMA-heap uses a protected memory pool provided by the backend TEE driver, allowing it to choose how to allocate the protected physical memory.
The allocated DMA-bufs must be imported with a new TEE_IOC_SHM_REGISTER_FD before they can be passed as arguments when requesting services from the secure world.
Three use-cases (Secure Video Playback, Trusted UI, and Secure Video Recording) have been identified so far to serve as examples of what can be expected. The use-cases have predefined DMA-heap names, "protected,secure-video", "protected,trusted-ui", and "protected,secure-video-record". The backend driver registers protected memory pools for the use-cases it supports.
Each use-case has its own protected memory pool since different use-cases require isolation from different parts of the system. A protected memory pool can be based on a static carveout instantiated while probing the TEE backend driver, or dynamically allocated from CMA (dma_alloc_pages()) and made protected as needed by the TEE.
This can be tested on a RockPi 4B+ with the following steps: repo init -u https://github.com/jenswi-linaro/manifest.git -m rockpi4.xml \ -b prototype/sdp-v12 repo sync -j8 cd build make toolchains -j$(nproc) make all -j$(nproc) # Copy ../out/rockpi4.img to an SD card and boot the RockPi from that # Connect a monitor to the RockPi # login and at the prompt: gst-launch-1.0 videotestsrc ! \ aesenc key=1f9423681beb9a79215820f6bda73d0f \ iv=e9aa8e834d8d70b7e0d254ff670dd718 serialize-iv=true ! \ aesdec key=1f9423681beb9a79215820f6bda73d0f ! \ kmssink
The aesdec module has been hacked to use an OP-TEE TA to decrypt the stream into protected DMA-bufs which are consumed by the kmssink.
The primitive QEMU tests from previous patch sets can be tested on RockPi in the same way using: xtest --sdp-basic
The primitive tests are tested on QEMU with the following steps: repo init -u https://github.com/jenswi-linaro/manifest.git -m qemu_v8.xml \ -b prototype/sdp-v12 repo sync -j8 cd build make toolchains -j$(nproc) make SPMC_AT_EL=1 all -j$(nproc) make SPMC_AT_EL=1 run-only # login and at the prompt: xtest --sdp-basic
The SPMC_AT_EL=1 parameter configures the build with FF-A and an SPMC at S-EL1 inside OP-TEE. The parameter can be changed to SPMC_AT_EL=n to test without FF-A using the original SMC ABI instead. Please remember to do %make arm-tf-clean for TF-A to be rebuilt properly using the new configuration.
https://optee.readthedocs.io/en/latest/building/prerequisites.html list dependencies required to build the above.
The primitive tests are pretty basic, mostly checking that a Trusted Application in the secure world can access and manipulate the memory. There are also some negative tests for out of bounds buffers, etc.
Thanks, Jens
Changes since V11: * In "dma-buf: dma-heap: export declared functions": - use EXPORT_SYMBOL_NS_GPL() - Added TJ's R-B and Sumit's Ack * In "tee: implement protected DMA-heap", import the namespaces "DMA_BUF" and "DMA_BUF_HEAP" as needed.
Changes since V10: * Changed the new ABI OPTEE_MSG_CMD_GET_PROTMEM_CONFIG to report a list of u32 memory attributes instead of u16 endpoints to make room for both endpoint and access permissions in each entry. * In "tee: new ioctl to a register tee_shm from a dmabuf file descriptor", remove the unused path for DMA-bufs allocated by other means than the on in the TEE SS. * In "tee: implement protected DMA-heap", handle unloading of the backend driver module implementing the heap. The heap is reference counted and also calls tee_device_get() to guarantee that the module remains available while the heap is instantiated. * In "optee: support protected memory allocation", use dma_coerce_mask_and_coherent() instead of open-coding the function. * Added Sumit's R-B to - "optee: smc abi: dynamic protected memory allocation" - "optee: FF-A: dynamic protected memory allocation" - "optee: support protected memory allocation" - "tee: implement protected DMA-heap" - "dma-buf: dma-heap: export declared functions"
Changes since V9: * Adding Sumit's R-B to "optee: sync secure world ABI headers" * Update commit message as requested for "dma-buf: dma-heap: export declared functions". * In "tee: implement protected DMA-heap": - add the hidden config option TEE_DMABUF_HEAPS to tell if the TEE subsystem can support DMA heaps - add a pfn_valid() to check that the passed physical address can be used by __pfn_to_page() and friends - remove the memremap() call, the caller is should do that instead if needed * In "tee: add tee_shm_alloc_dma_mem()" guard the calls to dma_alloc_pages() and dma_free_pages() with TEE_DMABUF_HEAPS to avoid linking errors in some configurations * In "optee: support protected memory allocation": - add the hidden config option OPTEE_STATIC_PROTMEM_POOL to tell if the driver can support a static protected memory pool - optee_protmem_pool_init() is slightly refactored to make the patches that follow easier - Call devm_memremap() before calling tee_protmem_static_pool_alloc()
Changes since V8: * Using dma_alloc_pages() instead of cma_alloc() so the direct dependency on CMA can be removed together with the patches "cma: export cma_alloc() and cma_release()" and "dma-contiguous: export dma_contiguous_default_area". The patch * Renaming the patch "tee: add tee_shm_alloc_cma_phys_mem()" to "tee: add tee_shm_alloc_dma_mem()" * Setting DMA mask for the OP-TEE TEE device based on input from the secure world instead of relying on the parent device so following patches are removed: "tee: tee_device_alloc(): copy dma_mask from parent device" and "optee: pass parent device to tee_device_alloc()". * Adding Sumit Garg's R-B to "tee: refactor params_from_user()" * In the patch "tee: implement protected DMA-heap", map the physical memory passed to tee_protmem_static_pool_alloc().
Changes since V7: * Adding "dma-buf: dma-heap: export declared functions", "cma: export cma_alloc() and cma_release()", and "dma-contiguous: export dma_contiguous_default_area" to export the symbols needed to keep the TEE subsystem as a load module. * Removing CONFIG_TEE_DMABUF_HEAP and CONFIG_TEE_CMA since they aren't needed any longer. * Addressing review comments in "optee: sync secure world ABI headers" * Better align protected memory pool initialization between the smc-abi and ffa-abi parts of the optee driver. * Removing the patch "optee: account for direction while converting parameters"
Changes since V6: * Restricted memory is now known as protected memory since to use the same term as https://docs.vulkan.org/guide/latest/protected.html. Update all patches to consistently use protected memory. * In "tee: implement protected DMA-heap" add the hidden config option TEE_DMABUF_HEAP to tell if the DMABUF_HEAPS functions are available for the TEE subsystem * Adding "tee: refactor params_from_user()", broken out from the patch "tee: new ioctl to a register tee_shm from a dmabuf file descriptor" * For "tee: new ioctl to a register tee_shm from a dmabuf file descriptor": - Update commit message to mention protected memory - Remove and open code tee_shm_get_parent_shm() in param_from_user_memref() * In "tee: add tee_shm_alloc_cma_phys_mem" add the hidden config option TEE_CMA to tell if the CMA functions are available for the TEE subsystem * For "tee: tee_device_alloc(): copy dma_mask from parent device" and "optee: pass parent device to tee_device_alloc", added Reviewed-by: Sumit Garg sumit.garg@kernel.org
Changes since V5: * Removing "tee: add restricted memory allocation" and "tee: add TEE_IOC_RSTMEM_FD_INFO" * Adding "tee: implement restricted DMA-heap", "tee: new ioctl to a register tee_shm from a dmabuf file descriptor", "tee: add tee_shm_alloc_cma_phys_mem()", "optee: pass parent device to tee_device_alloc()", and "tee: tee_device_alloc(): copy dma_mask from parent device" * The two TEE driver OPs "rstmem_alloc()" and "rstmem_free()" are replaced with a struct tee_rstmem_pool abstraction. * Replaced the the TEE_IOC_RSTMEM_ALLOC user space API with the DMA-heap API
Changes since V4: * Adding the patch "tee: add TEE_IOC_RSTMEM_FD_INFO" needed by the GStreamer demo * Removing the dummy CPU access and mmap functions from the dma_buf_ops * Fixing a compile error in "optee: FF-A: dynamic restricted memory allocation" reported by kernel test robot lkp@intel.com
Changes since V3: * Make the use_case and flags field in struct tee_shm u32's instead of u16's * Add more description for TEE_IOC_RSTMEM_ALLOC in the header file * Import namespace DMA_BUF in module tee, reported by lkp@intel.com * Added a note in the commit message for "optee: account for direction while converting parameters" why it's needed * Factor out dynamic restricted memory allocation from "optee: support restricted memory allocation" into two new commits "optee: FF-A: dynamic restricted memory allocation" and "optee: smc abi: dynamic restricted memory allocation" * Guard CMA usage with #ifdef CONFIG_CMA, effectively disabling dynamic restricted memory allocate if CMA isn't configured
Changes since the V2 RFC: * Based on v6.12 * Replaced the flags for SVP and Trusted UID memory with a u32 field with unique id for each use case * Added dynamic allocation of restricted memory pools * Added OP-TEE ABI both with and without FF-A for dynamic restricted memory * Added support for FF-A with FFA_LEND
Changes since the V1 RFC: * Based on v6.11 * Complete rewrite, replacing the restricted heap with TEE_IOC_RSTMEM_ALLOC
Changes since Olivier's post [2]: * Based on Yong Wu's post [1] where much of dma-buf handling is done in the generic restricted heap * Simplifications and cleanup * New commit message for "dma-buf: heaps: add Linaro restricted dmabuf heap support" * Replaced the word "secure" with "restricted" where applicable
Etienne Carriere (1): tee: new ioctl to a register tee_shm from a dmabuf file descriptor
Jens Wiklander (8): optee: sync secure world ABI headers dma-buf: dma-heap: export declared functions tee: implement protected DMA-heap tee: refactor params_from_user() tee: add tee_shm_alloc_dma_mem() optee: support protected memory allocation optee: FF-A: dynamic protected memory allocation optee: smc abi: dynamic protected memory allocation
drivers/dma-buf/dma-heap.c | 4 + drivers/tee/Kconfig | 5 + drivers/tee/Makefile | 1 + drivers/tee/optee/Kconfig | 5 + drivers/tee/optee/Makefile | 1 + drivers/tee/optee/core.c | 7 + drivers/tee/optee/ffa_abi.c | 146 ++++++++- drivers/tee/optee/optee_ffa.h | 27 +- drivers/tee/optee/optee_msg.h | 84 ++++- drivers/tee/optee/optee_private.h | 15 +- drivers/tee/optee/optee_smc.h | 37 ++- drivers/tee/optee/protmem.c | 335 ++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 141 ++++++++- drivers/tee/tee_core.c | 158 +++++++--- drivers/tee/tee_heap.c | 500 ++++++++++++++++++++++++++++++ drivers/tee/tee_private.h | 14 + drivers/tee/tee_shm.c | 157 +++++++++- include/linux/tee_core.h | 59 ++++ include/linux/tee_drv.h | 10 + include/uapi/linux/tee.h | 31 ++ 20 files changed, 1670 insertions(+), 67 deletions(-) create mode 100644 drivers/tee/optee/protmem.c create mode 100644 drivers/tee/tee_heap.c
base-commit: c17b750b3ad9f45f2b6f7e6f7f4679844244f0b9