On Fri, 29 Jan 2021 at 19:13, Jens Wiklander via OP-TEE op-tee@lists.trustedfirmware.org wrote:
Pulls in updates in the internal headers from OP-TEE OS [1]. A few defines has been shortened, hence the changes in rpc.c. Defines not used by the driver in tee_rpc_cmd.h has been filtered out.
Note that this does not change the ABI.
Link: [1] https://github.com/OP-TEE/optee_os Signed-off-by: Jens Wiklander jens.wiklander@linaro.org
drivers/tee/optee/optee_msg.h | 154 ++---------------------------- drivers/tee/optee/optee_rpc_cmd.h | 103 ++++++++++++++++++++ drivers/tee/optee/optee_smc.h | 70 +++++++++----- drivers/tee/optee/rpc.c | 39 ++++---- 4 files changed, 178 insertions(+), 188 deletions(-) create mode 100644 drivers/tee/optee/optee_rpc_cmd.h
Looks good to me apart from the minor nit below.
Reviewed-by: Sumit Garg sumit.garg@linaro.org
diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index 7b2d919da2ac..7c4723b66668 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */ /*
- Copyright (c) 2015-2019, Linaro Limited
*/
- Copyright (c) 2015-2021, Linaro Limited
#ifndef _OPTEE_MSG_H #define _OPTEE_MSG_H @@ -12,11 +12,9 @@
- This file defines the OP-TEE message protocol used to communicate
- with an instance of OP-TEE running in secure world.
- This file is divided into three sections.
- This file is divided into two sections.
- Formatting of messages.
- Requests from normal world
- Requests from secure world, Remote Procedure Call (RPC), handled by
*/
- tee-supplicant.
/***************************************************************************** @@ -54,8 +52,8 @@
- Every entry in buffer should point to a 4k page beginning (12 least
- significant bits must be equal to zero).
- 12 least significant bints of optee_msg_param.u.tmem.buf_ptr should hold page
- offset of the user buffer.
- 12 least significant bits of optee_msg_param.u.tmem.buf_ptr should hold
- page offset of user buffer.
- So, entries should be placed like members of this structure:
@@ -176,17 +174,9 @@ struct optee_msg_param {
- @params: the parameters supplied to the OS Command
- All normal calls to Trusted OS uses this struct. If cmd requires further
- information than what these field holds it can be passed as a parameter
- information than what these fields hold it can be passed as a parameter
- tagged as meta (setting the OPTEE_MSG_ATTR_META bit in corresponding
- attrs field). All parameters tagged as meta has to come first.
- Temp memref parameters can be fragmented if supported by the Trusted OS
- (when optee_smc.h is bearer of this protocol this is indicated with
- OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM). If a logical memref parameter is
- fragmented then has all but the last fragment the
- OPTEE_MSG_ATTR_FRAGMENT bit set in attrs. Even if a memref is fragmented
- it will still be presented as a single logical memref to the Trusted
- Application.
*/
- attrs field). All parameters tagged as meta have to come first.
struct optee_msg_arg { u32 cmd; @@ -290,13 +280,10 @@ struct optee_msg_arg {
- OPTEE_MSG_CMD_REGISTER_SHM registers a shared memory reference. The
- information is passed as:
- [in] param[0].attr OPTEE_MSG_ATTR_TYPE_TMEM_INPUT
[| OPTEE_MSG_ATTR_FRAGMENT]
[| OPTEE_MSG_ATTR_NONCONTIG]- [in] param[0].u.tmem.buf_ptr physical address (of first fragment)
- [in] param[0].u.tmem.size size (of first fragment)
- [in] param[0].u.tmem.shm_ref holds shared memory reference
- ...
- The shared memory can optionally be fragmented, temp memrefs can follow
- each other with all but the last with the OPTEE_MSG_ATTR_FRAGMENT bit set.
- OPTEE_MSG_CMD_UNREGISTER_SHM unregisteres a previously registered shared
nit: since you are touching this file, s/unregisteres/unregisters/
-Sumit
- memory reference. The information is passed as:
@@ -313,131 +300,4 @@ struct optee_msg_arg { #define OPTEE_MSG_CMD_UNREGISTER_SHM 5 #define OPTEE_MSG_FUNCID_CALL_WITH_ARG 0x0004
-/*****************************************************************************
- Part 3 - Requests from secure world, RPC
- *****************************************************************************/
-/*
- All RPC is done with a struct optee_msg_arg as bearer of information,
- struct optee_msg_arg::arg holds values defined by OPTEE_MSG_RPC_CMD_* below
- RPC communication with tee-supplicant is reversed compared to normal
- client communication desribed above. The supplicant receives requests
- and sends responses.
- */
-/*
- Load a TA into memory, defined in tee-supplicant
- */
-#define OPTEE_MSG_RPC_CMD_LOAD_TA 0
-/*
- Reserved
- */
-#define OPTEE_MSG_RPC_CMD_RPMB 1
-/*
- File system access, defined in tee-supplicant
- */
-#define OPTEE_MSG_RPC_CMD_FS 2
-/*
- Get time
- Returns number of seconds and nano seconds since the Epoch,
- 1970-01-01 00:00:00 +0000 (UTC).
- [out] param[0].u.value.a Number of seconds
- [out] param[0].u.value.b Number of nano seconds.
- */
-#define OPTEE_MSG_RPC_CMD_GET_TIME 3
-/*
- Wait queue primitive, helper for secure world to implement a wait queue.
- If secure world need to wait for a secure world mutex it issues a sleep
- request instead of spinning in secure world. Conversely is a wakeup
- request issued when a secure world mutex with a thread waiting thread is
- unlocked.
- Waiting on a key
- [in] param[0].u.value.a OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP
- [in] param[0].u.value.b wait key
- Waking up a key
- [in] param[0].u.value.a OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP
- [in] param[0].u.value.b wakeup key
- */
-#define OPTEE_MSG_RPC_CMD_WAIT_QUEUE 4 -#define OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP 0 -#define OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP 1
-/*
- Suspend execution
- [in] param[0].value .a number of milliseconds to suspend
- */
-#define OPTEE_MSG_RPC_CMD_SUSPEND 5
-/*
- Allocate a piece of shared memory
- Shared memory can optionally be fragmented, to support that additional
- spare param entries are allocated to make room for eventual fragments.
- The spare param entries has .attr = OPTEE_MSG_ATTR_TYPE_NONE when
- unused. All returned temp memrefs except the last should have the
- OPTEE_MSG_ATTR_FRAGMENT bit set in the attr field.
- [in] param[0].u.value.a type of memory one of
OPTEE_MSG_RPC_SHM_TYPE_* below
- [in] param[0].u.value.b requested size
- [in] param[0].u.value.c required alignment
- [out] param[0].u.tmem.buf_ptr physical address (of first fragment)
- [out] param[0].u.tmem.size size (of first fragment)
- [out] param[0].u.tmem.shm_ref shared memory reference
- ...
- [out] param[n].u.tmem.buf_ptr physical address
- [out] param[n].u.tmem.size size
- [out] param[n].u.tmem.shm_ref shared memory reference (same value
as in param[n-1].u.tmem.shm_ref)- */
-#define OPTEE_MSG_RPC_CMD_SHM_ALLOC 6 -/* Memory that can be shared with a non-secure user space application */ -#define OPTEE_MSG_RPC_SHM_TYPE_APPL 0 -/* Memory only shared with non-secure kernel */ -#define OPTEE_MSG_RPC_SHM_TYPE_KERNEL 1
-/*
- Free shared memory previously allocated with OPTEE_MSG_RPC_CMD_SHM_ALLOC
- [in] param[0].u.value.a type of memory one of
OPTEE_MSG_RPC_SHM_TYPE_* above
- [in] param[0].u.value.b value of shared memory reference
returned in param[0].u.tmem.shm_ref
above- */
-#define OPTEE_MSG_RPC_CMD_SHM_FREE 7
-/*
- Access a device on an i2c bus
- [in] param[0].u.value.a mode: RD(0), WR(1)
- [in] param[0].u.value.b i2c adapter
- [in] param[0].u.value.c i2c chip
- [in] param[1].u.value.a i2c control flags
- [in/out] memref[2] buffer to exchange the transfer data
with the secure world
- [out] param[3].u.value.a bytes transferred by the driver
- */
-#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21 -/* I2C master transfer modes */ -#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0 -#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1 -/* I2C master control flags */ -#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0)
#endif /* _OPTEE_MSG_H */ diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h new file mode 100644 index 000000000000..b8275140cef8 --- /dev/null +++ b/drivers/tee/optee/optee_rpc_cmd.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: BSD-2-Clause */ +/*
- Copyright (c) 2016-2021, Linaro Limited
- */
+#ifndef __OPTEE_RPC_CMD_H +#define __OPTEE_RPC_CMD_H
+/*
- All RPC is done with a struct optee_msg_arg as bearer of information,
- struct optee_msg_arg::arg holds values defined by OPTEE_RPC_CMD_* below.
- Only the commands handled by the kernel driver are defined here.
- RPC communication with tee-supplicant is reversed compared to normal
- client communication described above. The supplicant receives requests
- and sends responses.
- */
+/*
- Get time
- Returns number of seconds and nano seconds since the Epoch,
- 1970-01-01 00:00:00 +0000 (UTC).
- [out] value[0].a Number of seconds
- [out] value[0].b Number of nano seconds.
- */
+#define OPTEE_RPC_CMD_GET_TIME 3
+/*
- Wait queue primitive, helper for secure world to implement a wait queue.
- If secure world needs to wait for a secure world mutex it issues a sleep
- request instead of spinning in secure world. Conversely is a wakeup
- request issued when a secure world mutex with a thread waiting thread is
- unlocked.
- Waiting on a key
- [in] value[0].a OPTEE_RPC_WAIT_QUEUE_SLEEP
- [in] value[0].b Wait key
- Waking up a key
- [in] value[0].a OPTEE_RPC_WAIT_QUEUE_WAKEUP
- [in] value[0].b Wakeup key
- */
+#define OPTEE_RPC_CMD_WAIT_QUEUE 4 +#define OPTEE_RPC_WAIT_QUEUE_SLEEP 0 +#define OPTEE_RPC_WAIT_QUEUE_WAKEUP 1
+/*
- Suspend execution
- [in] value[0].a Number of milliseconds to suspend
- */
+#define OPTEE_RPC_CMD_SUSPEND 5
+/*
- Allocate a piece of shared memory
- [in] value[0].a Type of memory one of
OPTEE_RPC_SHM_TYPE_* below
- [in] value[0].b Requested size
- [in] value[0].c Required alignment
- [out] memref[0] Buffer
- */
+#define OPTEE_RPC_CMD_SHM_ALLOC 6 +/* Memory that can be shared with a non-secure user space application */ +#define OPTEE_RPC_SHM_TYPE_APPL 0 +/* Memory only shared with non-secure kernel */ +#define OPTEE_RPC_SHM_TYPE_KERNEL 1
+/*
- Free shared memory previously allocated with OPTEE_RPC_CMD_SHM_ALLOC
- [in] value[0].a Type of memory one of
OPTEE_RPC_SHM_TYPE_* above
- [in] value[0].b Value of shared memory reference or cookie
- */
+#define OPTEE_RPC_CMD_SHM_FREE 7
+/*
- Issue master requests (read and write operations) to an I2C chip.
- [in] value[0].a Transfer mode (OPTEE_RPC_I2C_TRANSFER_*)
- [in] value[0].b The I2C bus (a.k.a adapter).
16 bit field.
- [in] value[0].c The I2C chip (a.k.a address).
16 bit field (either 7 or 10 bit effective).
- [in] value[1].a The I2C master control flags (ie, 10 bit address).
16 bit field.
- [in/out] memref[2] Buffer used for data transfers.
- [out] value[3].a Number of bytes transferred by the REE.
- */
+#define OPTEE_RPC_CMD_I2C_TRANSFER 21
+/* I2C master transfer modes */ +#define OPTEE_RPC_I2C_TRANSFER_RD 0 +#define OPTEE_RPC_I2C_TRANSFER_WR 1
+/* I2C master control flags */ +#define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0)
+#endif /*__OPTEE_RPC_CMD_H*/ diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h index 777ad54d4c2c..821e1c30c150 100644 --- a/drivers/tee/optee/optee_smc.h +++ b/drivers/tee/optee/optee_smc.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */ /*
- Copyright (c) 2015-2019, Linaro Limited
*/
- Copyright (c) 2015-2021, Linaro Limited
#ifndef OPTEE_SMC_H #define OPTEE_SMC_H @@ -39,10 +39,10 @@ /*
- Function specified by SMC Calling convention
- Return one of the following UIDs if using API specified in this file
- without further extentions:
- 65cb6b93-af0c-4617-8ed6-644a8d1140f8
- see also OPTEE_SMC_UID_* in optee_msg.h
- Return the following UID if using API specified in this file
- without further extensions:
- 384fb3e0-e7f8-11e3-af63-0002a5d5c51b.
*/
- see also OPTEE_MSG_UID_* in optee_msg.h
#define OPTEE_SMC_FUNCID_CALLS_UID OPTEE_MSG_FUNCID_CALLS_UID #define OPTEE_SMC_CALLS_UID \ @@ -53,7 +53,7 @@ /*
- Function specified by SMC Calling convention
- Returns 2.0 if using API specified in this file without further extentions.
*/
- Returns 2.0 if using API specified in this file without further extensions.
- see also OPTEE_MSG_REVISION_* in optee_msg.h
#define OPTEE_SMC_FUNCID_CALLS_REVISION OPTEE_MSG_FUNCID_CALLS_REVISION @@ -109,8 +109,8 @@ struct optee_smc_call_get_os_revision_result {
- Call register usage:
- a0 SMC Function ID, OPTEE_SMC*CALL_WITH_ARG
- a1 Upper 32bit of a 64bit physical pointer to a struct optee_msg_arg
- a2 Lower 32bit of a 64bit physical pointer to a struct optee_msg_arg
- a1 Upper 32 bits of a 64-bit physical pointer to a struct optee_msg_arg
- a2 Lower 32 bits of a 64-bit physical pointer to a struct optee_msg_arg
- a3 Cache settings, not used if physical pointer is in a predefined shared
memory area else per OPTEE_SMC_SHM_*- a4-6 Not used
@@ -214,8 +214,9 @@ struct optee_smc_get_shm_config_result {
- secure world accepts command buffers located in any parts of non-secure RAM
*/ #define OPTEE_SMC_SEC_CAP_DYNAMIC_SHM BIT(2)
-/* Secure world supports Shared Memory with a NULL buffer reference */ +/* Secure world is built with virtualization support */ +#define OPTEE_SMC_SEC_CAP_VIRTUALIZATION BIT(3) +/* Secure world supports Shared Memory with a NULL reference */ #define OPTEE_SMC_SEC_CAP_MEMREF_NULL BIT(4)
#define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9 @@ -245,8 +246,8 @@ struct optee_smc_exchange_capabilities_result {
- Normal return register usage:
- a0 OPTEE_SMC_RETURN_OK
- a1 Upper 32bit of a 64bit Shared memory cookie
- a2 Lower 32bit of a 64bit Shared memory cookie
- a1 Upper 32 bits of a 64-bit Shared memory cookie
- a2 Lower 32 bits of a 64-bit Shared memory cookie
- a3-7 Preserved
- Cache empty return register usage:
@@ -293,6 +294,31 @@ struct optee_smc_disable_shm_cache_result { #define OPTEE_SMC_ENABLE_SHM_CACHE \ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE)
+/*
- Query OP-TEE about number of supported threads
- Normal World OS or Hypervisor issues this call to find out how many
- threads OP-TEE supports. That is how many standard calls can be issued
- in parallel before OP-TEE will return OPTEE_SMC_RETURN_ETHREAD_LIMIT.
- Call requests usage:
- a0 SMC Function ID, OPTEE_SMC_GET_THREAD_COUNT
- a1-6 Not used
- a7 Hypervisor Client ID register
- Normal return register usage:
- a0 OPTEE_SMC_RETURN_OK
- a1 Number of threads
- a2-7 Preserved
- Error return:
- a0 OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Requested call is not implemented
- a1-7 Preserved
- */
+#define OPTEE_SMC_FUNCID_GET_THREAD_COUNT 15 +#define OPTEE_SMC_GET_THREAD_COUNT \
OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_THREAD_COUNT)/*
- Resume from RPC (for example after processing a foreign interrupt)
@@ -341,16 +367,16 @@ struct optee_smc_disable_shm_cache_result {
- "Return" register usage:
- a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
- a1 Upper 32bits of 64bit physical pointer to allocated
- a1 Upper 32 bits of 64-bit physical pointer to allocated
memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can'tbe allocated.
- a2 Lower 32bits of 64bit physical pointer to allocated
- a2 Lower 32 bits of 64-bit physical pointer to allocated
memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can'tbe allocated- a3 Preserved
- a4 Upper 32bits of 64bit Shared memory cookie used when freeing
- a4 Upper 32 bits of 64-bit Shared memory cookie used when freeing
the memory or doing an RPC
- a5 Lower 32bits of 64bit Shared memory cookie used when freeing
*/
- a5 Lower 32 bits of 64-bit Shared memory cookie used when freeing
the memory or doing an RPC- a6-7 Preserved
@@ -363,9 +389,9 @@ struct optee_smc_disable_shm_cache_result {
- "Call" register usage:
- a0 This value, OPTEE_SMC_RETURN_RPC_FREE
- a1 Upper 32bits of 64bit shared memory cookie belonging to this
- a1 Upper 32 bits of 64-bit shared memory cookie belonging to this
argument memory
- a2 Lower 32bits of 64bit shared memory cookie belonging to this
- a2 Lower 32 bits of 64-bit shared memory cookie belonging to this
argument memory- a3-7 Resume information, must be preserved
@@ -379,7 +405,7 @@ struct optee_smc_disable_shm_cache_result { OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FREE)
/*
- Deliver foreign interrupt to normal world.
- Deliver a foreign interrupt in normal world.
- "Call" register usage:
- a0 OPTEE_SMC_RETURN_RPC_FOREIGN_INTR
@@ -389,7 +415,7 @@ struct optee_smc_disable_shm_cache_result {
- a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
- a1-7 Preserved
*/ -#define OPTEE_SMC_RPC_FUNC_FOREIGN_INTR 4 +#define OPTEE_SMC_RPC_FUNC_FOREIGN_INTR 4 #define OPTEE_SMC_RETURN_RPC_FOREIGN_INTR \ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FOREIGN_INTR)
@@ -405,10 +431,10 @@ struct optee_smc_disable_shm_cache_result {
- "Call" register usage:
- a0 OPTEE_SMC_RETURN_RPC_CMD
- a1 Upper 32bit of a 64bit Shared memory cookie holding a
- a1 Upper 32 bits of a 64-bit Shared memory cookie holding a
struct optee_msg_arg, must be preserved, only the data shouldbe updated
- a2 Lower 32bit of a 64bit Shared memory cookie holding a
- a2 Lower 32 bits of a 64-bit Shared memory cookie holding a
struct optee_msg_arg, must be preserved, only the data shouldbe updated- a3-7 Resume information, must be preserved
diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index 1e3614e4798f..a0c30b664e53 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -12,6 +12,7 @@ #include <linux/tee_drv.h> #include "optee_private.h" #include "optee_smc.h" +#include "optee_rpc_cmd.h"
struct wq_entry { struct list_head link; @@ -89,7 +90,7 @@ static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, if (!client.adapter) goto bad;
if (params[1].u.value.a & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) {
if (params[1].u.value.a & OPTEE_RPC_I2C_FLAGS_TEN_BIT) { if (!i2c_check_functionality(client.adapter, I2C_FUNC_10BIT_ADDR)) { i2c_put_adapter(client.adapter);@@ -103,11 +104,11 @@ static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr);
switch (params[0].u.value.a) {
case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD:
case OPTEE_RPC_I2C_TRANSFER_RD: ret = i2c_master_recv(&client, params[2].u.memref.shm->kaddr, params[2].u.memref.size); break;
case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR:
case OPTEE_RPC_I2C_TRANSFER_WR: ret = i2c_master_send(&client, params[2].u.memref.shm->kaddr, params[2].u.memref.size); break;@@ -194,10 +195,10 @@ static void handle_rpc_func_cmd_wq(struct optee *optee, goto bad;
switch (arg->params[0].u.value.a) {
case OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP:
case OPTEE_RPC_WAIT_QUEUE_SLEEP: wq_sleep(&optee->wait_queue, arg->params[0].u.value.b); break;
case OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP:
case OPTEE_RPC_WAIT_QUEUE_WAKEUP: wq_wakeup(&optee->wait_queue, arg->params[0].u.value.b); break; default:@@ -267,11 +268,11 @@ static struct tee_shm *cmd_alloc_suppl(struct tee_context *ctx, size_t sz) struct tee_shm *shm;
param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
param.u.value.a = OPTEE_MSG_RPC_SHM_TYPE_APPL;
param.u.value.a = OPTEE_RPC_SHM_TYPE_APPL; param.u.value.b = sz; param.u.value.c = 0;
ret = optee_supp_thrd_req(ctx, OPTEE_MSG_RPC_CMD_SHM_ALLOC, 1, ¶m);
ret = optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_ALLOC, 1, ¶m); if (ret) return ERR_PTR(-ENOMEM);@@ -308,10 +309,10 @@ static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
sz = arg->params[0].u.value.b; switch (arg->params[0].u.value.a) {
case OPTEE_MSG_RPC_SHM_TYPE_APPL:
case OPTEE_RPC_SHM_TYPE_APPL: shm = cmd_alloc_suppl(ctx, sz); break;
case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
case OPTEE_RPC_SHM_TYPE_KERNEL: shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED); break; default:@@ -383,7 +384,7 @@ static void cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) struct tee_param param;
param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
param.u.value.a = OPTEE_MSG_RPC_SHM_TYPE_APPL;
param.u.value.a = OPTEE_RPC_SHM_TYPE_APPL; param.u.value.b = tee_shm_get_id(shm); param.u.value.c = 0;@@ -400,7 +401,7 @@ static void cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) */ tee_shm_put(shm);
optee_supp_thrd_req(ctx, OPTEE_MSG_RPC_CMD_SHM_FREE, 1, ¶m);
optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m);}
static void handle_rpc_func_cmd_shm_free(struct tee_context *ctx, @@ -418,10 +419,10 @@ static void handle_rpc_func_cmd_shm_free(struct tee_context *ctx,
shm = (struct tee_shm *)(unsigned long)arg->params[0].u.value.b; switch (arg->params[0].u.value.a) {
case OPTEE_MSG_RPC_SHM_TYPE_APPL:
case OPTEE_RPC_SHM_TYPE_APPL: cmd_free_suppl(ctx, shm); break;
case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
case OPTEE_RPC_SHM_TYPE_KERNEL: tee_shm_free(shm); break; default:@@ -458,23 +459,23 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee, }
switch (arg->cmd) {
case OPTEE_MSG_RPC_CMD_GET_TIME:
case OPTEE_RPC_CMD_GET_TIME: handle_rpc_func_cmd_get_time(arg); break;
case OPTEE_MSG_RPC_CMD_WAIT_QUEUE:
case OPTEE_RPC_CMD_WAIT_QUEUE: handle_rpc_func_cmd_wq(optee, arg); break;
case OPTEE_MSG_RPC_CMD_SUSPEND:
case OPTEE_RPC_CMD_SUSPEND: handle_rpc_func_cmd_wait(arg); break;
case OPTEE_MSG_RPC_CMD_SHM_ALLOC:
case OPTEE_RPC_CMD_SHM_ALLOC: free_pages_list(call_ctx); handle_rpc_func_cmd_shm_alloc(ctx, arg, call_ctx); break;
case OPTEE_MSG_RPC_CMD_SHM_FREE:
case OPTEE_RPC_CMD_SHM_FREE: handle_rpc_func_cmd_shm_free(ctx, arg); break;
case OPTEE_MSG_RPC_CMD_I2C_TRANSFER:
case OPTEE_RPC_CMD_I2C_TRANSFER: handle_rpc_func_cmd_i2c_transfer(ctx, arg); break; default:-- 2.25.1