[PATCH 03/14] firmware: qcom_scm: Migrate to generic PAS service

From: Sumit Garg sumit.garg@oss.qualcomm.com

With the availability of generic PAS service, let's add SCM calls as a backend to keep supporting legacy QTEE interfaces. The exported qcom_scm* wrappers will get dropped once all the client drivers get migrated as part of future patches.

Signed-off-by: Sumit Garg sumit.garg@oss.qualcomm.com --- drivers/firmware/qcom/Kconfig | 1 + drivers/firmware/qcom/qcom_scm.c | 336 ++++++++++++++----------------- 2 files changed, 156 insertions(+), 181 deletions(-)

diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig index 8653639d06db..9a12ae2b639d 100644 --- a/drivers/firmware/qcom/Kconfig +++ b/drivers/firmware/qcom/Kconfig @@ -15,6 +15,7 @@ config QCOM_PAS TEE bus based PAS service implementation.

config QCOM_SCM + select QCOM_PAS select QCOM_TZMEM tristate

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 8fbc96693a55..2d7937ae7c8f 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -13,6 +13,7 @@ #include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/export.h> +#include <linux/firmware/qcom/qcom_pas.h> #include <linux/firmware/qcom/qcom_scm.h> #include <linux/firmware/qcom/qcom_tzmem.h> #include <linux/init.h> @@ -33,6 +34,7 @@

#include <dt-bindings/interrupt-controller/arm-gic.h>

+#include "qcom_pas.h" #include "qcom_scm.h" #include "qcom_tzmem.h"

@@ -480,25 +482,6 @@ void qcom_scm_cpu_power_down(u32 flags) } EXPORT_SYMBOL_GPL(qcom_scm_cpu_power_down);

-int qcom_scm_set_remote_state(u32 state, u32 id) -{ - struct qcom_scm_desc desc = { - .svc = QCOM_SCM_SVC_BOOT, - .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE, - .arginfo = QCOM_SCM_ARGS(2), - .args[0] = state, - .args[1] = id, - .owner = ARM_SMCCC_OWNER_SIP, - }; - struct qcom_scm_res res; - int ret; - - ret = qcom_scm_call(__scm->dev, &desc, &res); - - return ret ? : res.result[0]; -} -EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state); - static int qcom_scm_disable_sdi(void) { int ret; @@ -571,26 +554,12 @@ static void qcom_scm_set_download_mode(u32 dload_mode) dev_err(__scm->dev, "failed to set download mode: %d\n", ret); }

-/** - * devm_qcom_scm_pas_context_alloc() - Allocate peripheral authentication service - * context for a given peripheral - * - * PAS context is device-resource managed, so the caller does not need - * to worry about freeing the context memory. - * - * @dev: PAS firmware device - * @pas_id: peripheral authentication service id - * @mem_phys: Subsystem reserve memory start address - * @mem_size: Subsystem reserve memory size - * - * Returns: The new PAS context, or ERR_PTR() on failure. - */ struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev, u32 pas_id, phys_addr_t mem_phys, size_t mem_size) { - struct qcom_scm_pas_context *ctx; + struct qcom_pas_context *ctx;

ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) @@ -601,11 +570,12 @@ struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev, ctx->mem_phys = mem_phys; ctx->mem_size = mem_size;

- return ctx; + return (struct qcom_scm_pas_context *)ctx; } EXPORT_SYMBOL_GPL(devm_qcom_scm_pas_context_alloc);

-static int __qcom_scm_pas_init_image(u32 pas_id, dma_addr_t mdata_phys, +static int __qcom_scm_pas_init_image(struct device *dev, u32 pas_id, + dma_addr_t mdata_phys, struct qcom_scm_res *res) { struct qcom_scm_desc desc = { @@ -627,7 +597,7 @@ static int __qcom_scm_pas_init_image(u32 pas_id, dma_addr_t mdata_phys,

desc.args[1] = mdata_phys;

- ret = qcom_scm_call(__scm->dev, &desc, res); + ret = qcom_scm_call(dev, &desc, res); qcom_scm_bw_disable();

disable_clk: @@ -636,7 +606,8 @@ static int __qcom_scm_pas_init_image(u32 pas_id, dma_addr_t mdata_phys, return ret; }

-static int qcom_scm_pas_prep_and_init_image(struct qcom_scm_pas_context *ctx, +static int qcom_scm_pas_prep_and_init_image(struct device *dev, + struct qcom_pas_context *ctx, const void *metadata, size_t size) { struct qcom_scm_res res; @@ -651,7 +622,7 @@ static int qcom_scm_pas_prep_and_init_image(struct qcom_scm_pas_context *ctx, memcpy(mdata_buf, metadata, size); mdata_phys = qcom_tzmem_to_phys(mdata_buf);

- ret = __qcom_scm_pas_init_image(ctx->pas_id, mdata_phys, &res); + ret = __qcom_scm_pas_init_image(dev, ctx->pas_id, mdata_phys, &res); if (ret < 0) qcom_tzmem_free(mdata_buf); else @@ -660,25 +631,9 @@ static int qcom_scm_pas_prep_and_init_image(struct qcom_scm_pas_context *ctx, return ret ? : res.result[0]; }

-/** - * qcom_scm_pas_init_image() - Initialize peripheral authentication service - * state machine for a given peripheral, using the - * metadata - * @pas_id: peripheral authentication service id - * @metadata: pointer to memory containing ELF header, program header table - * and optional blob of data used for authenticating the metadata - * and the rest of the firmware - * @size: size of the metadata - * @ctx: optional pas context - * - * Return: 0 on success. - * - * Upon successful return, the PAS metadata context (@ctx) will be used to - * track the metadata allocation, this needs to be released by invoking - * qcom_scm_pas_metadata_release() by the caller. - */ -int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, - struct qcom_scm_pas_context *ctx) +static int __qcom_scm_pas_init_image2(struct device *dev, u32 pas_id, + const void *metadata, size_t size, + struct qcom_pas_context *ctx) { struct qcom_scm_res res; dma_addr_t mdata_phys; @@ -686,7 +641,8 @@ int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, int ret;

if (ctx && ctx->use_tzmem) - return qcom_scm_pas_prep_and_init_image(ctx, metadata, size); + return qcom_scm_pas_prep_and_init_image(dev, ctx, metadata, + size);

/* * During the scm call memory protection will be enabled for the meta @@ -700,16 +656,15 @@ int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, * If we pass a buffer that is already part of an SHM Bridge to this * call, it will fail. */ - mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys, - GFP_KERNEL); + mdata_buf = dma_alloc_coherent(dev, size, &mdata_phys, GFP_KERNEL); if (!mdata_buf) return -ENOMEM;

memcpy(mdata_buf, metadata, size);

- ret = __qcom_scm_pas_init_image(pas_id, mdata_phys, &res); + ret = __qcom_scm_pas_init_image(dev, pas_id, mdata_phys, &res); if (ret < 0 || !ctx) { - dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys); + dma_free_coherent(dev, size, mdata_buf, mdata_phys); } else if (ctx) { ctx->ptr = mdata_buf; ctx->phys = mdata_phys; @@ -718,36 +673,35 @@ int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,

return ret ? : res.result[0]; } -EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image);

-/** - * qcom_scm_pas_metadata_release() - release metadata context - * @ctx: pas context - */ -void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx) +int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size, + struct qcom_scm_pas_context *ctx) { - if (!ctx->ptr) - return; + return __qcom_scm_pas_init_image2(__scm->dev, pas_id, metadata, size, + (struct qcom_pas_context *)ctx); +} +EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image);

+static void __qcom_scm_pas_metadata_release(struct device *dev, + struct qcom_pas_context *ctx) +{ if (ctx->use_tzmem) qcom_tzmem_free(ctx->ptr); else - dma_free_coherent(__scm->dev, ctx->size, ctx->ptr, ctx->phys); + dma_free_coherent(dev, ctx->size, ctx->ptr, ctx->phys);

ctx->ptr = NULL; } + +void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx) +{ + __qcom_scm_pas_metadata_release(__scm->dev, + (struct qcom_pas_context *)ctx); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_metadata_release);

-/** - * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral - * for firmware loading - * @pas_id: peripheral authentication service id - * @addr: start address of memory area to prepare - * @size: size of the memory area to prepare - * - * Returns 0 on success. - */ -int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size) +static int __qcom_scm_pas_mem_setup(struct device *dev, u32 pas_id, + phys_addr_t addr, phys_addr_t size) { int ret; struct qcom_scm_desc desc = { @@ -769,7 +723,7 @@ int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size) if (ret) goto disable_clk;

- ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res); qcom_scm_bw_disable();

disable_clk: @@ -777,9 +731,15 @@ int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size)

return ret ? : res.result[0]; } + +int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size) +{ + return __qcom_scm_pas_mem_setup(__scm->dev, pas_id, addr, size); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_mem_setup);

-static void *__qcom_scm_pas_get_rsc_table(u32 pas_id, void *input_rt_tzm, +static void *__qcom_scm_pas_get_rsc_table(struct device *dev, u32 pas_id, + void *input_rt_tzm, size_t input_rt_size, size_t *output_rt_size) { @@ -814,7 +774,7 @@ static void *__qcom_scm_pas_get_rsc_table(u32 pas_id, void *input_rt_tzm, * with output_rt_tzm buffer with res.result[2] size however, It should not * be of unresonable size. */ - ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res); if (!ret && res.result[2] > SZ_1G) { ret = -E2BIG; goto free_output_rt; @@ -831,51 +791,11 @@ static void *__qcom_scm_pas_get_rsc_table(u32 pas_id, void *input_rt_tzm, return ret ? ERR_PTR(ret) : output_rt_tzm; }

-/** - * qcom_scm_pas_get_rsc_table() - Retrieve the resource table in passed output buffer - * for a given peripheral. - * - * Qualcomm remote processor may rely on both static and dynamic resources for - * its functionality. Static resources typically refer to memory-mapped addresses - * required by the subsystem and are often embedded within the firmware binary - * and dynamic resources, such as shared memory in DDR etc., are determined at - * runtime during the boot process. - * - * On Qualcomm Technologies devices, it's possible that static resources are not - * embedded in the firmware binary and instead are provided by TrustZone However, - * dynamic resources are always expected to come from TrustZone. This indicates - * that for Qualcomm devices, all resources (static and dynamic) will be provided - * by TrustZone via the SMC call. - * - * If the remote processor firmware binary does contain static resources, they - * should be passed in input_rt. These will be forwarded to TrustZone for - * authentication. TrustZone will then append the dynamic resources and return - * the complete resource table in output_rt_tzm. - * - * If the remote processor firmware binary does not include a resource table, - * the caller of this function should set input_rt as NULL and input_rt_size - * as zero respectively. - * - * More about documentation on resource table data structures can be found in - * include/linux/remoteproc.h - * - * @ctx: PAS context - * @pas_id: peripheral authentication service id - * @input_rt: resource table buffer which is present in firmware binary - * @input_rt_size: size of the resource table present in firmware binary - * @output_rt_size: TrustZone expects caller should pass worst case size for - * the output_rt_tzm. - * - * Return: - * On success, returns a pointer to the allocated buffer containing the final - * resource table and output_rt_size will have actual resource table size from - * TrustZone. The caller is responsible for freeing the buffer. On failure, - * returns ERR_PTR(-errno). - */ -struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx, - void *input_rt, - size_t input_rt_size, - size_t *output_rt_size) +static void *__qcom_scm_pas_get_rsc_table2(struct device *dev, + struct qcom_pas_context *ctx, + void *input_rt, + size_t input_rt_size, + size_t *output_rt_size) { struct resource_table empty_rsc = {}; size_t size = SZ_16K; @@ -910,11 +830,12 @@ struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *c

memcpy(input_rt_tzm, input_rt, input_rt_size);

- output_rt_tzm = __qcom_scm_pas_get_rsc_table(ctx->pas_id, input_rt_tzm, + output_rt_tzm = __qcom_scm_pas_get_rsc_table(dev, ctx->pas_id, + input_rt_tzm, input_rt_size, &size); if (PTR_ERR(output_rt_tzm) == -EOVERFLOW) /* Try again with the size requested by the TZ */ - output_rt_tzm = __qcom_scm_pas_get_rsc_table(ctx->pas_id, + output_rt_tzm = __qcom_scm_pas_get_rsc_table(dev, ctx->pas_id, input_rt_tzm, input_rt_size, &size); @@ -945,16 +866,20 @@ struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *c

return ret ? ERR_PTR(ret) : tbl_ptr; } + +struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx, + void *input_rt, + size_t input_rt_size, + size_t *output_rt_size) +{ + return __qcom_scm_pas_get_rsc_table2(__scm->dev, + (struct qcom_pas_context *)ctx, + input_rt, input_rt_size, + output_rt_size); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_get_rsc_table);

-/** - * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware - * and reset the remote processor - * @pas_id: peripheral authentication service id - * - * Return 0 on success. - */ -int qcom_scm_pas_auth_and_reset(u32 pas_id) +static int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -974,7 +899,7 @@ int qcom_scm_pas_auth_and_reset(u32 pas_id) if (ret) goto disable_clk;

- ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res); qcom_scm_bw_disable();

disable_clk: @@ -982,28 +907,15 @@ int qcom_scm_pas_auth_and_reset(u32 pas_id)

return ret ? : res.result[0]; } + +int qcom_scm_pas_auth_and_reset(u32 pas_id) +{ + return __qcom_scm_pas_auth_and_reset(__scm->dev, pas_id); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset);

-/** - * qcom_scm_pas_prepare_and_auth_reset() - Prepare, authenticate, and reset the - * remote processor - * - * @ctx: Context saved during call to qcom_scm_pas_context_init() - * - * This function performs the necessary steps to prepare a PAS subsystem, - * authenticate it using the provided metadata, and initiate a reset sequence. - * - * It should be used when Linux is in control setting up the IOMMU hardware - * for remote subsystem during secure firmware loading processes. The preparation - * step sets up a shmbridge over the firmware memory before TrustZone accesses the - * firmware memory region for authentication. The authentication step verifies - * the integrity and authenticity of the firmware or configuration using secure - * metadata. Finally, the reset step ensures the subsystem starts in a clean and - * sane state. - * - * Return: 0 on success, negative errno on failure. - */ -int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) +static int __qcom_scm_pas_prepare_and_auth_reset(struct device *dev, + struct qcom_pas_context *ctx) { u64 handle; int ret; @@ -1014,7 +926,7 @@ int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) * memory region and then invokes a call to TrustZone to authenticate. */ if (!ctx->use_tzmem) - return qcom_scm_pas_auth_and_reset(ctx->pas_id); + return __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id);

/* * When Linux runs @ EL2 Linux must create the shmbridge itself and then @@ -1024,20 +936,45 @@ int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) if (ret) return ret;

- ret = qcom_scm_pas_auth_and_reset(ctx->pas_id); + ret = __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id); qcom_tzmem_shm_bridge_delete(handle);

return ret; } + +int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx) +{ + return __qcom_scm_pas_prepare_and_auth_reset(__scm->dev, + (struct qcom_pas_context *)ctx); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_prepare_and_auth_reset);

-/** - * qcom_scm_pas_shutdown() - Shut down the remote processor - * @pas_id: peripheral authentication service id - * - * Returns 0 on success. - */ -int qcom_scm_pas_shutdown(u32 pas_id) +static int __qcom_scm_pas_set_remote_state(struct device *dev, u32 state, + u32 pas_id) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_BOOT, + .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE, + .arginfo = QCOM_SCM_ARGS(2), + .args[0] = state, + .args[1] = pas_id, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + int ret; + + ret = qcom_scm_call(dev, &desc, &res); + + return ret ? : res.result[0]; +} + +int qcom_scm_set_remote_state(u32 state, u32 id) +{ + return __qcom_scm_pas_set_remote_state(__scm->dev, state, id); +} +EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state); + +static int __qcom_scm_pas_shutdown(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -1057,7 +994,7 @@ int qcom_scm_pas_shutdown(u32 pas_id) if (ret) goto disable_clk;

- ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res); qcom_scm_bw_disable();

disable_clk: @@ -1065,16 +1002,14 @@ int qcom_scm_pas_shutdown(u32 pas_id)

return ret ? : res.result[0]; } + +int qcom_scm_pas_shutdown(u32 pas_id) +{ + return __qcom_scm_pas_shutdown(__scm->dev, pas_id); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_shutdown);

-/** - * qcom_scm_pas_supported() - Check if the peripheral authentication service is - * available for the given peripherial - * @pas_id: peripheral authentication service id - * - * Returns true if PAS is supported for this peripheral, otherwise false. - */ -bool qcom_scm_pas_supported(u32 pas_id) +static bool __qcom_scm_pas_supported(struct device *dev, u32 pas_id) { int ret; struct qcom_scm_desc desc = { @@ -1086,16 +1021,49 @@ bool qcom_scm_pas_supported(u32 pas_id) }; struct qcom_scm_res res;

- if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL, + if (!__qcom_scm_is_call_available(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_IS_SUPPORTED)) return false;

- ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call(dev, &desc, &res);

return ret ? false : !!res.result[0]; } + +bool qcom_scm_pas_supported(u32 pas_id) +{ + return __qcom_scm_pas_supported(__scm->dev, pas_id); +} EXPORT_SYMBOL_GPL(qcom_scm_pas_supported);

+static struct qcom_pas_ops qcom_pas_ops_scm = { + .drv_name = "qcom_scm", + .supported = __qcom_scm_pas_supported, + .init_image = __qcom_scm_pas_init_image2, + .mem_setup = __qcom_scm_pas_mem_setup, + .get_rsc_table = __qcom_scm_pas_get_rsc_table2, + .auth_and_reset = __qcom_scm_pas_auth_and_reset, + .prepare_and_auth_reset = __qcom_scm_pas_prepare_and_auth_reset, + .set_remote_state = __qcom_scm_pas_set_remote_state, + .shutdown = __qcom_scm_pas_shutdown, + .metadata_release = __qcom_scm_pas_metadata_release, +}; + +/** + * qcom_scm_is_pas_available() - Check if the peripheral authentication service + * is available via SCM or not + * + * Returns true if PAS is available, otherwise false. + */ +static bool qcom_scm_is_pas_available(void) +{ + if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PIL_PAS_AUTH_AND_RESET)) + return false; + + return true; +} + static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset) { struct qcom_scm_desc desc = { @@ -2782,6 +2750,11 @@ static int qcom_scm_probe(struct platform_device *pdev)

__get_convention();

+ if (qcom_scm_is_pas_available()) { + qcom_pas_ops_scm.dev = scm->dev; + qcom_pas_ops_register(&qcom_pas_ops_scm); + } + /* * If "download mode" is requested, from this point on warmboot * will cause the boot stages to enter download mode, unless @@ -2818,6 +2791,7 @@ static void qcom_scm_shutdown(struct platform_device *pdev) { /* Clean shutdown, disable download mode to allow normal restart */ qcom_scm_set_download_mode(QCOM_DLOAD_NODUMP); + qcom_pas_ops_unregister(); }

static const struct of_device_id qcom_scm_dt_match[] = {