The "st,stm32mp1-m4-tee" compatible is utilized in a system configuration where the Cortex-M4 firmware is loaded by the Trusted execution Environment (TEE). This compatible is used in both the Linux and OP-TEE device-tree. - In OP-TEE, a node is defined in the device tree with the st,stm32mp1-m4-tee to support signed remoteproc firmware. Based on DT properties, OP-TEE authenticates, loads, starts, and stops the firmware. - On Linux, when the compatibility is set, the Cortex-M resets should not be declared in the device tree.
Signed-off-by: Arnaud Pouliquen arnaud.pouliquen@foss.st.com --- .../bindings/remoteproc/st,stm32-rproc.yaml | 53 +++++++++++++++---- 1 file changed, 44 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index 370af61d8f28..9fdfa30eff20 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -16,7 +16,12 @@ maintainers:
properties: compatible: - const: st,stm32mp1-m4 + enum: + - st,stm32mp1-m4 + - st,stm32mp1-m4-tee + description: + Use "st,stm32mp1-m4" for the Cortex-M4 coprocessor management by Linux + Use "st,stm32mp1-m4-tee" for the Cortex-M4 coprocessor management by secure context
reg: description: @@ -142,21 +147,41 @@ properties: required: - compatible - reg - - resets
allOf: - if: properties: - reset-names: - not: - contains: - const: hold_boot + compatible: + contains: + const: st,stm32mp1-m4 + then: + if: + properties: + reset-names: + not: + contains: + const: hold_boot + then: + required: + - st,syscfg-holdboot + - resets + else: + properties: + st,syscfg-holdboot: false + required: + - reset-names + - resets + + - if: + properties: + compatible: + contains: + const: st,stm32mp1-m4-tee then: - required: - - st,syscfg-holdboot - else: properties: st,syscfg-holdboot: false + reset-names: false + resets: false
additionalProperties: false
@@ -188,5 +213,15 @@ examples: st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; }; + - | + #include <dt-bindings/reset/stm32mp1-resets.h> + m4@10000000 { + compatible = "st,stm32mp1-m4-tee"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; + st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; + };
...