- OP-TEE - lists.trustedfirmware.org

[PATCH v3] arm64: defconfig: Enable QCOMTEE on Qualcomm SM8650+

by Harshal Dev

Enable QCOMTEE driver on Qualcomm SM8650+ SoCs to facilitate communication with the Qualcomm Trusted Execution Environment (QTEE). (No enablement required in DTS files since QCOMTEE device is dynamically registered by the QCOM_SCM firmware driver) Signed-off-by: Harshal Dev <harshal.dev(a)oss.qualcomm.com> --- Changes in v3: - Updated the commit message to reflect the supported Qualcomm platforms. - Link to v2: https://lore.kernel.org/r/20251205-qcom_qcomtee_defconfig-v2-1-c92560b0346e… Changes in v2: - Updated CONFIG_QCOMTEE flag to 'm' since QCOMTEE can be built as a module. - Link to v1: https://lore.kernel.org/r/20251202-qcom_qcomtee_defconfig-v1-1-11bfe40a8ea4… --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index cdb7d69e3b24..e952d24bef77 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1789,6 +1789,7 @@ CONFIG_FPGA_MGR_ZYNQMP_FPGA=m CONFIG_FPGA_MGR_VERSAL_FPGA=m CONFIG_TEE=y CONFIG_OPTEE=y +CONFIG_QCOMTEE=m CONFIG_MUX_GPIO=m CONFIG_MUX_MMIO=y CONFIG_SLIMBUS=m --- base-commit: 47b7b5e32bb7264b51b89186043e1ada4090b558 change-id: 20251202-qcom_qcomtee_defconfig-8dc0fed1411b Best regards, -- Harshal Dev <harshal.dev(a)oss.qualcomm.com>

5 months, 3 weeks

6
15
0 0

[PATCH] optee: update outdated comment

by Julia Lawall

The function cmd_alloc_suppl() was renamed as optee_rpc_cmd_alloc_suppl() in commit c51a564a5b48 ("optee: isolate smc abi"). Update the comment accordingly. Signed-off-by: Julia Lawall <Julia.Lawall(a)inria.fr> --- drivers/tee/optee/rpc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index ebbbd42b0e3e..97fc5b14db0c 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -247,8 +247,8 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) param.u.value.c = 0; /* - * Match the tee_shm_get_from_id() in cmd_alloc_suppl() as secure - * world has released its reference. + * Match the tee_shm_get_from_id() in optee_rpc_cmd_alloc_suppl() + * as secure world has released its reference. * * It's better to do this before sending the request to supplicant * as we'd like to let the process doing the initial allocation to

5 months, 3 weeks

3
2
0 0

[PATCH 1/3] tee: qcomtee: call: Fix confusing cleanup.h syntax

by Krzysztof Kozlowski

Initializing automatic __free variables to NULL without need (e.g. branches with different allocations), followed by actual allocation is in contrary to explicit coding rules guiding cleanup.h: "Given that the "__free(...) = NULL" pattern for variables defined at the top of the function poses this potential interdependency problem the recommendation is to always define and assign variables in one statement and not group variable definitions at the top of the function when __free() is used." Code does not have a bug, but is less readable and uses discouraged coding practice, so fix that by moving declaration to the place of assignment. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)oss.qualcomm.com> --- drivers/tee/qcomtee/call.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/tee/qcomtee/call.c b/drivers/tee/qcomtee/call.c index 65f9140d4e1f..8f8830f0df26 100644 --- a/drivers/tee/qcomtee/call.c +++ b/drivers/tee/qcomtee/call.c @@ -395,9 +395,7 @@ static int qcomtee_object_invoke(struct tee_context *ctx, struct tee_ioctl_object_invoke_arg *arg, struct tee_param *params) { - struct qcomtee_object_invoke_ctx *oic __free(kfree) = NULL; struct qcomtee_context_data *ctxdata = ctx->data; - struct qcomtee_arg *u __free(kfree) = NULL; struct qcomtee_object *object; int i, ret, result; @@ -412,12 +410,14 @@ static int qcomtee_object_invoke(struct tee_context *ctx, } /* Otherwise, invoke a QTEE object: */ - oic = qcomtee_object_invoke_ctx_alloc(ctx); + struct qcomtee_object_invoke_ctx *oic __free(kfree) = + qcomtee_object_invoke_ctx_alloc(ctx); if (!oic) return -ENOMEM; /* +1 for ending QCOMTEE_ARG_TYPE_INV. */ - u = kcalloc(arg->num_params + 1, sizeof(*u), GFP_KERNEL); + struct qcomtee_arg *u __free(kfree) = kcalloc(arg->num_params + 1, sizeof(*u), + GFP_KERNEL); if (!u) return -ENOMEM; @@ -562,9 +562,8 @@ static int qcomtee_supp_send(struct tee_context *ctx, u32 errno, u32 num_params, static int qcomtee_open(struct tee_context *ctx) { - struct qcomtee_context_data *ctxdata __free(kfree) = NULL; - - ctxdata = kzalloc(sizeof(*ctxdata), GFP_KERNEL); + struct qcomtee_context_data *ctxdata __free(kfree) = kzalloc(sizeof(*ctxdata), + GFP_KERNEL); if (!ctxdata) return -ENOMEM; @@ -645,12 +644,12 @@ static void qcomtee_get_version(struct tee_device *teedev, static void qcomtee_get_qtee_feature_list(struct tee_context *ctx, u32 id, u32 *version) { - struct qcomtee_object_invoke_ctx *oic __free(kfree) = NULL; struct qcomtee_object *client_env, *service; struct qcomtee_arg u[3] = { 0 }; int result; - oic = qcomtee_object_invoke_ctx_alloc(ctx); + struct qcomtee_object_invoke_ctx *oic __free(kfree) = + qcomtee_object_invoke_ctx_alloc(ctx); if (!oic) return; -- 2.51.0

5 months, 3 weeks

5
14
0 0

Preparing for OP-TEE 4.9.0

by Jens Wiklander

[BCC all OP-TEE maintainers] Hi OP-TEE maintainers & contributors, OP-TEE version 4.9.0 is now scheduled for release on 2026-01-16. So, now is a good time to start testing the master branch across various platforms and report or fix any bugs. The GitHub pull request for collecting Tested-by tags or any other comments is https://github.com/OP-TEE/optee_os/pull/7666. I have now created the 4.9.0-rc1 tags in the various OP-TEE gits. Please proceed with the testing. You can find more information related to releases here: https://optee.readthedocs.io/en/latest/general/releases.html Thanks, Jens

6 months

1
0
0 0

build breakage with SCMI

by Dan Carpenter

When I try building with `make run WITH_SCMI=y` then the build fails: core/lib/scmi-server/scmi_server.c: In function ‘scmi_server_initialize’: core/lib/scmi-server/scmi_server.c:83:22: error: implicit declaration of function ‘scmi_configure’ [-Wimplicit-function-declaration] 83 | rc = scmi_configure(cfg); | ^~~~~~~~~~~~~~ This was introduced in commit ce6ea4112008 ("scmi-server: configure SCP-firmware from DT"). A grep for scmi_configure() turns up empty. Was part of the commit missing? regards, dan carpenter

6 months, 2 weeks

3
3
0 0

[PATCH v1 00/17] tee: Use bus callbacks instead of driver callbacks

by Uwe Kleine-König

Hello, the objective of this series is to make tee driver stop using callbacks in struct device_driver. These were superseded by bus methods in 2006 (commit 594c8281f905 ("[PATCH] Add bus_type probe, remove, shutdown methods.")) but nobody cared to convert all subsystems accordingly. Here the tee drivers are converted. The first commit is somewhat unrelated, but simplifies the conversion (and the drivers). It introduces driver registration helpers that care about setting the bus and owner. (The latter is missing in all drivers, so by using these helpers the drivers become more correct.) The patches #4 - #17 depend on the first two, so if they should be applied to their respective subsystem trees these must contain the first two patches first. Note that after patch #2 is applied, unconverted drivers provoke a warning in driver_register(), so it would be good for the user experience if the whole series goes in during a single merge window. So I guess an immutable branch containing the frist three patches that can be merged into the other subsystem trees would be sensible. After all patches are applied, tee_bus_type can be made private to drivers/tee as it's not used in other places any more. Best regards Uwe Uwe Kleine-König (17): tee: Add some helpers to reduce boilerplate for tee client drivers tee: Add probe, remove and shutdown bus callbacks to tee_client_driver tee: Adapt documentation to cover recent additions hwrng: optee - Make use of module_tee_client_driver() hwrng: optee - Make use of tee bus methods rtc: optee: Migrate to use tee specific driver registration function rtc: optee: Make use of tee bus methods efi: stmm: Make use of module_tee_client_driver() efi: stmm: Make use of tee bus methods firmware: arm_scmi: optee: Make use of module_tee_client_driver() firmware: arm_scmi: Make use of tee bus methods firmware: tee_bnxt: Make use of module_tee_client_driver() firmware: tee_bnxt: Make use of tee bus methods KEYS: trusted: Migrate to use tee specific driver registration function KEYS: trusted: Make use of tee bus methods tpm/tpm_ftpm_tee: Make use of tee specific driver registration tpm/tpm_ftpm_tee: Make use of tee bus methods Documentation/driver-api/tee.rst | 18 +---- drivers/char/hw_random/optee-rng.c | 26 ++---- drivers/char/tpm/tpm_ftpm_tee.c | 31 +++++--- drivers/firmware/arm_scmi/transports/optee.c | 32 +++----- drivers/firmware/broadcom/tee_bnxt_fw.c | 30 ++----- drivers/firmware/efi/stmm/tee_stmm_efi.c | 25 ++---- drivers/rtc/rtc-optee.c | 27 ++----- drivers/tee/tee_core.c | 84 ++++++++++++++++++++ include/linux/tee_drv.h | 12 +++ security/keys/trusted-keys/trusted_tee.c | 17 ++-- 10 files changed, 164 insertions(+), 138 deletions(-) base-commit: 7d0a66e4bb9081d75c82ec4957c50034cb0ea449 -- 2.47.3

6 months, 2 weeks

6
47
0 0

[PATCH v2] arm64: defconfig: Enable QCOMTEE for Qualcomm SoCs

by Harshal Dev

Enable config 'm' for the QCOMTEE driver to facilitate communication with the Qualcomm Trusted Execution Environment (QTEE) on Qualcomm platforms. Signed-off-by: Harshal Dev <harshal.dev(a)oss.qualcomm.com> --- Changes in v2: - Updated CONFIG_QCOMTEE flag to 'm' since QCOMTEE can be built as a module. - Link to v1: https://lore.kernel.org/r/20251202-qcom_qcomtee_defconfig-v1-1-11bfe40a8ea4… --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index cdb7d69e3b24..e952d24bef77 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1789,6 +1789,7 @@ CONFIG_FPGA_MGR_ZYNQMP_FPGA=m CONFIG_FPGA_MGR_VERSAL_FPGA=m CONFIG_TEE=y CONFIG_OPTEE=y +CONFIG_QCOMTEE=m CONFIG_MUX_GPIO=m CONFIG_MUX_MMIO=y CONFIG_SLIMBUS=m --- base-commit: 47b7b5e32bb7264b51b89186043e1ada4090b558 change-id: 20251202-qcom_qcomtee_defconfig-8dc0fed1411b Best regards, -- Harshal Dev <hdev(a)qti.qualcomm.com>

6 months, 3 weeks

2
4
0 0

[PATCH] arm64: defconfig: Enable QCOMTEE for Qualcomm SoCs

by Harshal Dev

Enable config for the QCOMTEE driver to facilitate communication with the Qualcomm Trusted Execution Environment (QTEE) on Qualcomm platforms. Signed-off-by: Harshal Dev <harshal.dev(a)oss.qualcomm.com> --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index cdb7d69e3b24..57b2b09d0479 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1789,6 +1789,7 @@ CONFIG_FPGA_MGR_ZYNQMP_FPGA=m CONFIG_FPGA_MGR_VERSAL_FPGA=m CONFIG_TEE=y CONFIG_OPTEE=y +CONFIG_QCOMTEE=y CONFIG_MUX_GPIO=m CONFIG_MUX_MMIO=y CONFIG_SLIMBUS=m --- base-commit: 47b7b5e32bb7264b51b89186043e1ada4090b558 change-id: 20251202-qcom_qcomtee_defconfig-8dc0fed1411b Best regards, -- Harshal Dev <harshal.dev(a)oss.qualcomm.com>

6 months, 4 weeks

2
4
0 0

Linaro OP-TEE Contribution, LOC, monthly meeting November 25

by Jens Wiklander

Hi, Tomorrow, Tuesday, it's time for another LOC monthly meeting. For time and connection details, see the calendar at https://www.trustedfirmware.org/meetings/ I have a couple of small things for the agenda: - A recent patch [1] on the mailing list proposes to export the OP-TEE version info printed by the driver during boot in sysfs - Do we have any questions or issues with the proposed CFG_* variable improvements from the last LOC? Are there any other topics? Please note that the LOC in December will be cancelled. [1] https://lore.kernel.org/op-tee/20251121141230.489294-1-jj251510319013@gmail… Cheers, Jens

7 months, 1 week

1
0
0 0

[GIT PULL] QCOMTEE fixes2 for v6.18

by Jens Wiklander

Hello arm-soc maintainers, Please pull these two small fixes for the QCOMTEE driver in the TEE subsystem. Thanks, Jens The following changes since commit 3a8660878839faadb4f1a6dd72c3179c1df56787: Linux 6.18-rc1 (2025-10-12 13:42:36 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee.git tags/qcomtee-fixes2-for-6.18 for you to fetch changes up to e19d7f7e92e061707252eab2b71d2c3be09b2e96: tee: qcomtee: initialize result before use in release worker (2025-11-17 10:19:29 +0100) ---------------------------------------------------------------- QCOMTEE fixes2 for v6.18 - initialize result before use in in error path - fix uninitialized pointers with free attribute ---------------------------------------------------------------- Ally Heev (1): tee: qcomtee: fix uninitialized pointers with free attribute Amirreza Zarrabi (1): tee: qcomtee: initialize result before use in release worker drivers/tee/qcomtee/call.c | 2 +- drivers/tee/qcomtee/core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

7 months, 2 weeks

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

OP-TEE