- mbed-tls - lists.trustedfirmware.org

by Frank Bergmann

Hi, we have an application which uses ASIO. And now we want to add mbed TLS to provide a TLS layer. ASIO can be used with OpenSSL and wolfSSL. But how to do this with mbed TLS? Any hints on that? See also this question at SO: https://stackoverflow.com/questions/61875404/asio-c-with-mbed-tls-library best regards, Frank

5 years

1
0
0 0

DTLS handshake never ends successfully

by Xavier Del Campo Romero

I want to connect an ESP32 to a DTLS server using mbedtls' dtls_server demo. The code I used for the client is very similar to the dtls_client example, but is unable to finish the handshake process for some reason. According to Wireshark, the client is not responding to the "Server hello done" frame, causing a timeout that makes the server to send the certificate again and again until it gives up the connection. The dtls_client demo works correctly on the computer, but not on the ESP32. Has anyone tested DTLS on the ESP32? I have attached the following files for further reference: - dtls_esp32.pcapng: Wireshark file with the DTLS packets between client and server. - mbedtls.tar.bz2: compressed (> 7k lines) plain text log as reported by the board. On line 7131, where the last message from the server is received, it looks like the client never receives the whole message, so it never reaches the "Server hello done" state. Could anyone please confirm this? - dtls.c: client source code. Slightly modified from the dtls_client example. Thank you very much for your help. Xavi

5 years

1
0
0 0

Re: [mbed-tls] Feedback sought on a new PSA Crypto driver interface

by Quach, Brian

Hi, I was reviewing the proposal and had a few questions on usage of the new params. 1) When using plaintext keys, is the "attributes" param unused and should/could it be set to NULL? 2) If using key store (i.e. opaque), is the key ID the only attribute field which needs to be set? My assumption is attributes would be populated from the key store using the key ID? 3) If using key store, are the "key_buffer" and "key_buffer_size" params typically unused (i.e. can be set to null and zero respectively)? I do the proposal says the buffer content is up to the driver. Are there any usage cases in mind? 4) For drivers that support both opaque and transparent operation, which param would be used to determine the mode? (I had assumed key ID = 0 would be transparent, and non-zero is opaque) I'm unclear how persistent_state for opaque driver's is used. Could you elaborate on how it's used by the driver and core and why it isn't needed for transparent drivers? Key management with opaque drivers Transparent drivers may provide the following key management functions: Should this be "Opaque"? Regards, Brian Quach SimpleLink MCU Texas Instruments Inc. 12500 TI Blvd, MS F-4000 Dallas, TX 75243 214-479-4076

5 years

1
0
0 0

Re: [mbed-tls] mbedtls_x509write_crt_set_subject_name, mbedtls_x509_dn_gets fail to handle UTF8 multibyte properly

by Martin Man

> On 11 Jun 2020, at 12:09, Gilles Peskine via mbed-tls <mbed-tls(a)lists.trustedfirmware.org> wrote: > > On 11/06/2020 11:24, Martin Man via mbed-tls wrote: >> >> I think this is a bug and the dn_gets should simply leave the UTF-8 >> multibyte untouched when parsing it out from a field tagged with ASN.1 >> tag 12 (utf-8). > > We are not going to do Unicode normalization in Mbed TLS: that would be > far too complex for a library that runs on systems with ~1e5 bytes > available for code. So Unicode strings would only be processed correctly > if the application passes normalized strings and CAs only generate > certificates with normalized strings. But that would be an improvement > on converting non-ASCII characters to '?'. Definitely agree that normalization is not needed. I think this problem could be split into two parts: 1) When a const char* is passed into mbedtls_x509write_crt_set_subject_name, the mbedtls will currently encode it into ASN tag 12 UTF8. Not sure what validation is done. But it could perhaps do at least a basic validation of what the C string passed in is to avoid generating a cert with crippled DN. Alternatively you can simply trust the developer to pass in correct UTF8 and document this. This is a API design decision of what input is allowed to be passed into the method and what validation is done on this. 2) When the mbedtls_x509_dn_gets extracts a C string from the ASN.1 tagged as 12, it could validate that it is indeed valid UTF-8, or just leave it as is and push it out. Again, this is about what we expect the library to do. I’m not an expert on whether this can in any way be used to trick MBEDLTS to do bad things when sending in a malformed certificate, say a one where DN is encoded as UTF-8 but contains illegal UTF-8 in the payload. thanks for listening, Martin

5 years

1
0
0 0

Re: [mbed-tls] mbedtls_x509write_crt_set_subject_name, mbedtls_x509_dn_gets fail to handle UTF8 multibyte properly

by Gilles Peskine

On 11/06/2020 11:24, Martin Man via mbed-tls wrote: > The code in mbedtls_x509_dn_gets fails to properly handle the UTF-8 > multibyte sequence 0xe2 0x80 0x99 and turns it into 0xe2 0x80 0x3f. > > There is a fix floating around development branch mentioned > here https://github.com/ARMmbed/mbedtls/pull/3326/files which > essentially replaces all control chars with question marks. > > I think this is a bug and the dn_gets should simply leave the UTF-8 > multibyte untouched when parsing it out from a field tagged with ASN.1 > tag 12 (utf-8). That code is from an earlier era (mid 2000s, I think) when most systems used an 8-bit encoding, but non-8-bit-clean systems were still common. A '\x80' in text might be transformed to '\x00' with disastrous consequences. But over a decade later, I don't think non-8-bit-clean systems are a concern anymore. Leaving all non-ASCII characters alone sounds reasonable to me. We are not going to do Unicode normalization in Mbed TLS: that would be far too complex for a library that runs on systems with ~1e5 bytes available for code. So Unicode strings would only be processed correctly if the application passes normalized strings and CAs only generate certificates with normalized strings. But that would be an improvement on converting non-ASCII characters to '?'. -- Gilles Peskine Mbed TLS developer

5 years

1
0
0 0

mbedtls_x509write_crt_set_subject_name, mbedtls_x509_dn_gets fail to handle UTF8 multibyte properly

by Martin Man

Hi guys, I’m new to the list and bringing the discussion over here from https://github.com/ARMmbed/mbedtls/issues/3413 <https://github.com/ARMmbed/mbedtls/issues/3413>. I’m creating a certificate using mbedtls and setting it’s issuer and and subject using the mbedtls_x509write_crt_set_subject_name, and mbedtls_x509write_crt_set_issuer_name. The name passed in is in UTF8 and contains a sequence 0xe2 0x80 0x99 (apostrophe) in the CN string. If I debugged this correctly, the underlying sequence of bytes is correctly encoded in ASN.1 and tagged as 12 (UTF-8). When I later parse the cert and try to extract its subject back using mbedtls_x509_dn_gets from crt.subject and crt.issuer the UTF-8 gets corrupted. The code in mbedtls_x509_dn_gets fails to properly handle the UTF-8 multibyte sequence 0xe2 0x80 0x99 and turns it into 0xe2 0x80 0x3f. There is a fix floating around development branch mentioned here https://github.com/ARMmbed/mbedtls/pull/3326/files <https://github.com/ARMmbed/mbedtls/pull/3326/files> which essentially replaces all control chars with question marks. I think this is a bug and the dn_gets should simply leave the UTF-8 multibyte untouched when parsing it out from a field tagged with ASN.1 tag 12 (utf-8). What’s your opinion? Martin

5 years

1
0
0 0

ERROR: mbedtls_ssl_handshake returned -0x50 (with AWS IOT SDK )

by Srinivasa Rao Ragolu

Hi All, I recently started working on mbedtls for AWS IoT SDK based applications. Issue: I am planning to run AWS IoT SDK sample applications on my memory constrained (6MB RAM) embedded hardware Usage: AWS IOT SDK(3.0.1 release version) and mbedtls (2.16.5) Note: This filesystem is Read-Only file system. I have tried on Ubuntu 18.04 setup first to make things clear. It was not working with "AmazonRootCA1.pem" and working perfectly fine with cross-signed "G2-RootCA1.pem". Ref: https://docs.aws.amazon.com/iot/latest/developerguide/iot-embedded-c-sdk.ht… So I have cross-compiled for my target board using ARM toolchain and copied the binary and certificates. I have downloaded device certificate, private key and RootCA from AWS IOT Core to my device. Nothing on my device except copying the above 3 files. On my Embedded platform, whenever run my application, mbedtls is throwing the error "mbedtls_ssl_handshake returned -0x50" So I have enabled the debug in mbedtls library and ran below command to dig into the problem. $ ./ssl_client2 server_name=a2g7twmqo7hg82-ats.iot.ap-south-1.amazonaws.com<http://a2g7twmqo7hg82-ats.iot.ap-south-1.amazonaws.com/> serv er_port=443 ca_file=/certs/G2-RootCA1.pem crt_file=/certs/4960bd2f6b-certificate .pem.crt key_file=/certs/4960bd2f6b-private.pem.key Output: $ ./ssl_client2 server_name=a2g7twmqo7hg82-ats.iot.ap-south-1.amazonaws.com<http://a2g7twmqo7hg82-ats.iot.ap-south-1.amazonaws.com/> serv er_port=443 ca_file=/certs/G2-RootCA1.pem crt_file=/certs/4960bd2f6b-certificate .pem.crt key_file=/certs/4960bd2f6b-private.pem.key . Seeding the random number generator... ok . Loading the CA root certificate ... ok (0 skipped) . Loading the client cert. and key... ok . Connecting to tcp/a2g7twmqo7hg82-ats.iot.ap-south-1.amazonaws.com/443.<http://a2g7twmqo7hg82-ats.iot.ap-south-1.amazonaws.com/443.>.. ok . Setting up the SSL/TLS structure...ssl_tls.c:0081: |3| set_timer to 0 ms ok . Performing the SSL/TLS handshake...ssl_tls.c:8084: |2| => handshake ssl_cli.c:3510: |2| client state: 0 ssl_tls.c:2755: |2| => flush output ssl_tls.c:2767: |2| <= flush output ssl_cli.c:3510: |2| client state: 1 ssl_tls.c:2755: |2| => flush output ssl_tls.c:2767: |2| <= flush output ssl_cli.c:0774: |2| => write client hello ssl_cli.c:0811: |3| client hello, max version: [3:3] ssl_cli.c:0703: |3| client hello, current time: 1540981791 ssl_cli.c:0821: |3| dumping 'client hello, random bytes' (32 bytes) ssl_cli.c:0821: |3| 0000: 5b d9 84 1f 2f 33 35 54 ea 0b 5d e1 dc 42 0c 99 [.../35T..]..B.. ssl_cli.c:0821: |3| 0010: d4 a1 25 72 6f 0f cf 8e 56 0d ab f5 10 e4 47 46 ..%ro...V.....GF ssl_cli.c:0874: |3| client hello, session id len.: 0 ssl_cli.c:0875: |3| dumping 'client hello, session id' (0 bytes) ssl_cli.c:0921: |3| client hello, add ciphersuite: cca8 ssl_cli.c:0921: |3| client hello, add ciphersuite: cca9 ssl_cli.c:0921: |3| client hello, add ciphersuite: ccaa ssl_cli.c:0921: |3| client hello, add ciphersuite: c02c ssl_cli.c:0921: |3| client hello, add ciphersuite: c030 ssl_cli.c:0921: |3| client hello, add ciphersuite: 009f ssl_cli.c:0921: |3| client hello, add ciphersuite: c0ad ssl_cli.c:0921: |3| client hello, add ciphersuite: c09f ssl_cli.c:0921: |3| client hello, add ciphersuite: c024 ssl_cli.c:0921: |3| client hello, add ciphersuite: c028 ssl_cli.c:0921: |3| client hello, add ciphersuite: 006b ssl_cli.c:0921: |3| client hello, add ciphersuite: c00a ssl_cli.c:0921: |3| client hello, add ciphersuite: c014 ssl_cli.c:0921: |3| client hello, add ciphersuite: 0039 ssl_cli.c:0921: |3| client hello, add ciphersuite: c0af ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a3 ssl_cli.c:0921: |3| client hello, add ciphersuite: c087 ssl_cli.c:0921: |3| client hello, add ciphersuite: c08b ssl_cli.c:0921: |3| client hello, add ciphersuite: c07d ssl_cli.c:0921: |3| client hello, add ciphersuite: c073 ssl_cli.c:0921: |3| client hello, add ciphersuite: c077 ssl_cli.c:0921: |3| client hello, add ciphersuite: 00c4 ssl_cli.c:0921: |3| client hello, add ciphersuite: 0088 ssl_cli.c:0921: |3| client hello, add ciphersuite: c02b ssl_cli.c:0921: |3| client hello, add ciphersuite: c02f ssl_cli.c:0921: |3| client hello, add ciphersuite: 009e ssl_cli.c:0921: |3| client hello, add ciphersuite: c0ac ssl_cli.c:0921: |3| client hello, add ciphersuite: c09e ssl_cli.c:0921: |3| client hello, add ciphersuite: c023 ssl_cli.c:0921: |3| client hello, add ciphersuite: c027 ssl_cli.c:0921: |3| client hello, add ciphersuite: 0067 ssl_cli.c:0921: |3| client hello, add ciphersuite: c009 ssl_cli.c:0921: |3| client hello, add ciphersuite: c013 ssl_cli.c:0921: |3| client hello, add ciphersuite: 0033 ssl_cli.c:0921: |3| client hello, add ciphersuite: c0ae ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a2 ssl_cli.c:0921: |3| client hello, add ciphersuite: c086 ssl_cli.c:0921: |3| client hello, add ciphersuite: c08a ssl_cli.c:0921: |3| client hello, add ciphersuite: c07c ssl_cli.c:0921: |3| client hello, add ciphersuite: c072 ssl_cli.c:0921: |3| client hello, add ciphersuite: c076 ssl_cli.c:0921: |3| client hello, add ciphersuite: 00be ssl_cli.c:0921: |3| client hello, add ciphersuite: 0045 ssl_cli.c:0921: |3| client hello, add ciphersuite: ccac ssl_cli.c:0921: |3| client hello, add ciphersuite: ccad ssl_cli.c:0921: |3| client hello, add ciphersuite: 00ab ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a7 ssl_cli.c:0921: |3| client hello, add ciphersuite: c038 ssl_cli.c:0921: |3| client hello, add ciphersuite: 00b3 ssl_cli.c:0921: |3| client hello, add ciphersuite: c036 ssl_cli.c:0921: |3| client hello, add ciphersuite: 0091 ssl_cli.c:0921: |3| client hello, add ciphersuite: c091 ssl_cli.c:0921: |3| client hello, add ciphersuite: c09b ssl_cli.c:0921: |3| client hello, add ciphersuite: c097 ssl_cli.c:0921: |3| client hello, add ciphersuite: c0ab ssl_cli.c:0921: |3| client hello, add ciphersuite: 00aa ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a6 ssl_cli.c:0921: |3| client hello, add ciphersuite: c037 ssl_cli.c:0921: |3| client hello, add ciphersuite: 00b2 ssl_cli.c:0921: |3| client hello, add ciphersuite: c035 ssl_cli.c:0921: |3| client hello, add ciphersuite: 0090 ssl_cli.c:0921: |3| client hello, add ciphersuite: c090 ssl_cli.c:0921: |3| client hello, add ciphersuite: c096 ssl_cli.c:0921: |3| client hello, add ciphersuite: c09a ssl_cli.c:0921: |3| client hello, add ciphersuite: c0aa ssl_cli.c:0921: |3| client hello, add ciphersuite: 009d ssl_cli.c:0921: |3| client hello, add ciphersuite: c09d ssl_cli.c:0921: |3| client hello, add ciphersuite: 003d ssl_cli.c:0921: |3| client hello, add ciphersuite: 0035 ssl_cli.c:0921: |3| client hello, add ciphersuite: c032 ssl_cli.c:0921: |3| client hello, add ciphersuite: c02a ssl_cli.c:0921: |3| client hello, add ciphersuite: c00f ssl_cli.c:0921: |3| client hello, add ciphersuite: c02e ssl_cli.c:0921: |3| client hello, add ciphersuite: c026 ssl_cli.c:0921: |3| client hello, add ciphersuite: c005 ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a1 ssl_cli.c:0921: |3| client hello, add ciphersuite: c07b ssl_cli.c:0921: |3| client hello, add ciphersuite: 00c0 ssl_cli.c:0921: |3| client hello, add ciphersuite: 0084 ssl_cli.c:0921: |3| client hello, add ciphersuite: c08d ssl_cli.c:0921: |3| client hello, add ciphersuite: c079 ssl_cli.c:0921: |3| client hello, add ciphersuite: c089 ssl_cli.c:0921: |3| client hello, add ciphersuite: c075 ssl_cli.c:0921: |3| client hello, add ciphersuite: 009c ssl_cli.c:0921: |3| client hello, add ciphersuite: c09c ssl_cli.c:0921: |3| client hello, add ciphersuite: 003c ssl_cli.c:0921: |3| client hello, add ciphersuite: 002f ssl_cli.c:0921: |3| client hello, add ciphersuite: c031 ssl_cli.c:0921: |3| client hello, add ciphersuite: c029 ssl_cli.c:0921: |3| client hello, add ciphersuite: c00e ssl_cli.c:0921: |3| client hello, add ciphersuite: c02d ssl_cli.c:0921: |3| client hello, add ciphersuite: c025 ssl_cli.c:0921: |3| client hello, add ciphersuite: c004 ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a0 ssl_cli.c:0921: |3| client hello, add ciphersuite: c07a ssl_cli.c:0921: |3| client hello, add ciphersuite: 00ba ssl_cli.c:0921: |3| client hello, add ciphersuite: 0041 ssl_cli.c:0921: |3| client hello, add ciphersuite: c08c ssl_cli.c:0921: |3| client hello, add ciphersuite: c078 ssl_cli.c:0921: |3| client hello, add ciphersuite: c088 ssl_cli.c:0921: |3| client hello, add ciphersuite: c074 ssl_cli.c:0921: |3| client hello, add ciphersuite: ccae ssl_cli.c:0921: |3| client hello, add ciphersuite: 00ad ssl_cli.c:0921: |3| client hello, add ciphersuite: 00b7 ssl_cli.c:0921: |3| client hello, add ciphersuite: 0095 ssl_cli.c:0921: |3| client hello, add ciphersuite: c093 ssl_cli.c:0921: |3| client hello, add ciphersuite: c099 ssl_cli.c:0921: |3| client hello, add ciphersuite: 00ac ssl_cli.c:0921: |3| client hello, add ciphersuite: 00b6 ssl_cli.c:0921: |3| client hello, add ciphersuite: 0094 ssl_cli.c:0921: |3| client hello, add ciphersuite: c092 ssl_cli.c:0921: |3| client hello, add ciphersuite: c098 ssl_cli.c:0921: |3| client hello, add ciphersuite: ccab ssl_cli.c:0921: |3| client hello, add ciphersuite: 00a9 ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a5 ssl_cli.c:0921: |3| client hello, add ciphersuite: 00af ssl_cli.c:0921: |3| client hello, add ciphersuite: 008d ssl_cli.c:0921: |3| client hello, add ciphersuite: c08f ssl_cli.c:0921: |3| client hello, add ciphersuite: c095 ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a9 ssl_cli.c:0921: |3| client hello, add ciphersuite: 00a8 ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a4 ssl_cli.c:0921: |3| client hello, add ciphersuite: 00ae ssl_cli.c:0921: |3| client hello, add ciphersuite: 008c ssl_cli.c:0921: |3| client hello, add ciphersuite: c08e ssl_cli.c:0921: |3| client hello, add ciphersuite: c094 ssl_cli.c:0921: |3| client hello, add ciphersuite: c0a8 ssl_cli.c:0934: |3| client hello, got 127 ciphersuites (excluding SCSVs) ssl_cli.c:0943: |3| adding EMPTY_RENEGOTIATION_INFO_SCSV ssl_cli.c:0992: |3| client hello, compress len.: 1 ssl_cli.c:0993: |3| client hello, compress alg.: 0 ssl_cli.c:0068: |3| client hello, adding server name extension: a2g7twmqo7hg82-ats.iot.ap-south-1.amazonaws.com<http://a2g7twmqo7hg82-ats.iot.ap-south-1.amazonaws.com/> ssl_cli.c:0186: |3| client hello, adding signature_algorithms extension ssl_cli.c:0271: |3| client hello, adding supported_elliptic_curves extension ssl_cli.c:0336: |3| client hello, adding supported_point_formats extension ssl_cli.c:0517: |3| client hello, adding encrypt_then_mac extension ssl_cli.c:0551: |3| client hello, adding extended_master_secret extension ssl_cli.c:0585: |3| client hello, adding session ticket extension ssl_cli.c:1070: |3| client hello, total extension length: 128 ssl_tls.c:3184: |2| => write handshake message ssl_tls.c:3343: |2| => write record ssl_tls.c:3420: |3| output record: msgtype = 22, version = [3:1], msglen = 429 ssl_tls.c:3425: |4| dumping 'output record sent to network' (434 bytes) ssl_tls.c:3425: |4| 0000: 16 03 01 01 ad 01 00 01 a9 03 03 5b d9 84 1f 2f ...........[.../ ssl_tls.c:3425: |4| 0010: 33 35 54 ea 0b 5d e1 dc 42 0c 99 d4 a1 25 72 6f 35T..]..B....%ro ssl_tls.c:3425: |4| 0020: 0f cf 8e 56 0d ab f5 10 e4 47 46 00 01 00 cc a8 ...V.....GF..... ssl_tls.c:3425: |4| 0030: cc a9 cc aa c0 2c c0 30 00 9f c0 ad c0 9f c0 24 .....,.0.......$ ssl_tls.c:3425: |4| 0040: c0 28 00 6b c0 0a c0 14 00 39 c0 af c0 a3 c0 87 .(.k.....9...... ssl_tls.c:3425: |4| 0050: c0 8b c0 7d c0 73 c0 77 00 c4 00 88 c0 2b c0 2f ...}.s.w.....+./ ssl_tls.c:3425: |4| 0060: 00 9e c0 ac c0 9e c0 23 c0 27 00 67 c0 09 c0 13 .......#.'.g.... ssl_tls.c:3425: |4| 0070: 00 33 c0 ae c0 a2 c0 86 c0 8a c0 7c c0 72 c0 76 .3.........|.r.v ssl_tls.c:3425: |4| 0080: 00 be 00 45 cc ac cc ad 00 ab c0 a7 c0 38 00 b3 ...E.........8.. ssl_tls.c:3425: |4| 0090: c0 36 00 91 c0 91 c0 9b c0 97 c0 ab 00 aa c0 a6 .6.............. ssl_tls.c:3425: |4| 00a0: c0 37 00 b2 c0 35 00 90 c0 90 c0 96 c0 9a c0 aa .7...5.......... ssl_tls.c:3425: |4| 00b0: 00 9d c0 9d 00 3d 00 35 c0 32 c0 2a c0 0f c0 2e .....=.5.2.*.... ssl_tls.c:3425: |4| 00c0: c0 26 c0 05 c0 a1 c0 7b 00 c0 00 84 c0 8d c0 79 .&.....{.......y ssl_tls.c:3425: |4| 00d0: c0 89 c0 75 00 9c c0 9c 00 3c 00 2f c0 31 c0 29 ...u.....<./.1.) ssl_tls.c:3425: |4| 00e0: c0 0e c0 2d c0 25 c0 04 c0 a0 c0 7a 00 ba 00 41 ...-.%.....z...A ssl_tls.c:3425: |4| 00f0: c0 8c c0 78 c0 88 c0 74 cc ae 00 ad 00 b7 00 95 ...x...t........ ssl_tls.c:3425: |4| 0100: c0 93 c0 99 00 ac 00 b6 00 94 c0 92 c0 98 cc ab ................ ssl_tls.c:3425: |4| 0110: 00 a9 c0 a5 00 af 00 8d c0 8f c0 95 c0 a9 00 a8 ................ ssl_tls.c:3425: |4| 0120: c0 a4 00 ae 00 8c c0 8e c0 94 c0 a8 00 ff 01 00 ................ ssl_tls.c:3425: |4| 0130: 00 80 00 00 00 34 00 32 00 00 2f 61 32 67 37 74 .....4.2../a2g7t ssl_tls.c:3425: |4| 0140: 77 6d 71 6f 37 68 67 38 32 2d 61 74 73 2e 69 6f wmqo7hg82-ats.io<http://wmqo7hg82-ats.io/> ssl_tls.c:3425: |4| 0150: 74 2e 61 70 2d 73 6f 75 74 68 2d 31 2e 61 6d 61 t.ap-south-1.ama ssl_tls.c:3425: |4| 0160: 7a 6f 6e 61 77 73 2e 63 6f 6d 00 0d 00 16 00 14 zonaws.com...... ssl_tls.c:3425: |4| 0170: 06 03 06 01 05 03 05 01 04 03 04 01 03 03 03 01 ................ ssl_tls.c:3425: |4| 0180: 02 03 02 01 00 0a 00 18 00 16 00 19 00 1c 00 18 ................ ssl_tls.c:3425: |4| 0190: 00 1b 00 17 00 16 00 1a 00 15 00 14 00 13 00 12 ................ ssl_tls.c:3425: |4| 01a0: 00 0b 00 02 01 00 00 16 00 00 00 17 00 00 00 23 ...............# ssl_tls.c:3425: |4| 01b0: 00 00 .. ssl_tls.c:2755: |2| => flush output ssl_tls.c:2773: |2| message length: 434, out_left: 434 ssl_tls.c:2779: |2| ssl->f_send() returned 434 (-0xfffffe4e) ssl_tls.c:2807: |2| <= flush output ssl_tls.c:3476: |2| <= write record ssl_tls.c:3320: |2| <= write handshake message ssl_cli.c:1106: |2| <= write client hello ssl_cli.c:3510: |2| client state: 2 ssl_tls.c:2755: |2| => flush output ssl_tls.c:2767: |2| <= flush output ssl_cli.c:1499: |2| => parse server hello ssl_tls.c:4311: |2| => read record ssl_tls.c:2536: |2| => fetch input ssl_tls.c:2696: |2| in_left: 0, nb_want: 5 ssl_tls.c:2720: |2| in_left: 0, nb_want: 5 ssl_tls.c:2722: |2| ssl->f_recv(_timeout)() returned -80 (-0x0050) ssl_tls.c:4973: |1| mbedtls_ssl_fetch_input() returned -80 (-0x0050) ssl_tls.c:4344: |1| ssl_get_next_record() returned -80 (-0x0050) ssl_cli.c:1506: |1| mbedtls_ssl_read_record() returned -80 (-0x0050) ssl_tls.c:8094: |2| <= handshake failed ! mbedtls_ssl_handshake returned -0x50 Last error was: -0x50 - NET - Connection was reset by peer ssl_tls.c:8934: |2| => free ssl_tls.c:8999: |2| <= free I request you to help me in resolving this issue. Regards, Srinivas. [cid:ef4e58a5-df1a-47f0-90b9-c467a93244c2]

5 years

1
0
0 0

Re: [mbed-tls] support mbedTLS no entropy source

by Dan Handley

Hi Palomo All the documentation we have to share is already available, either in the upstream codebase, the wiki (https://developer.trustedfirmware.org/w/mbed-tls/) or the legacy website (https://tls.mbed.org/). Some of the info on the latter is out of date. The core development team at Arm do not offer training. Arm has a Partner Enablement Group that does this kind of thing but I don't think they offer Mbed TLS specific training currently. I've asked them if they would consider this in future but I guess that's not going to help you in the short term. Good luck with your learning and we'll try to answer any specific questions you have. Regards Dan. From: mbed-tls <mbed-tls-bounces(a)lists.trustedfirmware.org> On Behalf Of Jesus Gualberto Palomo Garcia via mbed-tls Sent: 08 June 2020 04:46 To: Gilles Peskine <Gilles.Peskine(a)arm.com> Cc: mbed-tls(a)lists.trustedfirmware.org Subject: Re: [mbed-tls] support mbedTLS no entropy source Hi Gilles. Thanks for follow my questions and attend it, regarding trainings, I want to understand how the encryption works, how the algorithms works inside the library, I can read the code and google the concepts but I want to accelerate the knowledge transfer, maybe for implement some optimization, I don't if that is possible, at the moment my PoC using uClinux works perfectly and the TLS 1.2 ir running over 80Mhz, so that is pretty awesome, but I want to learn more about encryption, maybe if you can share me some literature regarding this point? Thank you very much and regards from Mexico! On Tue, Jun 2, 2020 at 6:21 PM Gilles Peskine <gilles.peskine(a)arm.com<mailto:gilles.peskine@arm.com>> wrote: Hi Palomo, I don't think there's any other way at the moment. The patch in my email is one possible solution, but I'm not sure if it's right, because not all platforms with a Linux kernel have /dev/urandom. I think the best solution would be to make the existence of /dev/urandom a platform configuration option. But platform options are a little messy already, between the MBEDTLS_HAVE_xxx options, the MBEDTLS_PLATFORM_STD_xxx options, the MBEDTLS_PLATFORM_xxx_MACRO options, the MBEDTLS_PLATFORM_xxx_ALT options. And this new option wouldn't behave like any of the existing ones since it should have three settings: guess (the default, identical to the current behavior of observing preprocessor symbols like __unix__), off and on. We should figure out what to do about platform options in 3.0 before making this even more complex. me.todo.add("collect my thoughts on simplifying platform customization and post them to the list") Regarding trainings, my team doesn't normally do that, but there are other teams in Arm that do. What topic are you interested in? -- Gilles Peskine Mbed TLS developer On 31/05/2020 20:06, Jesus Gualberto Palomo Garcia wrote: > Hello Gilles thanks for your support, yes finally I could compile the > library in the architecture that I used, I forced the compilation to > entry in the "if _unix_" conditional compilation, but I assume that > exist another way to do this. Do you have a example for enable that > conditional compilation flags? > > regarding to my dev/urandom, yes my platform has this feature, the > library runs very well, but I just have the point related to "force" > the compilation because the library doesn't recognize the unix > architecture. > > Thanks and we keep in touch! > > Regards from Mexico! > > BTW If I want to professional training, Do you offered this service? > > On Mon, May 25, 2020 at 11:07 AM Gilles Peskine via mbed-tls > <mbed-tls(a)lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org> > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org>>> wrote: > > Hi Palomo, > > You seem to be compiling for a system with a Linux kernel, but > with only > a partial Unix userland. The “Unix” code in the entropy_poll module > might work on your system, but it is only enabled if __unix__ or > __unix > (or a few others) is defined. > > Can you please try the attached patch? Does your runtime environment > have /dev/urandom ? > > Regarding the knowledge base article, you need to remove the "." > character at the end of the URL: > https://tls.mbed.org/kb/how-to/add-a-random-generator-- > > Gilles Peskine > Mbed TLS developer > > On 19/05/2020 21:43, Jesus Gualberto Palomo Garcia via mbed-tls wrote: > > Hello Hanno, Thanks for your thanks for you quickly replay. > > > > I have an error compilation, I'm using nios2-linux-uclibc for my > cross > > compilation and uclinux architecture, > > the linux kernel is 2.60 but I have this error when I try to compile > > the library, I want to use the library as a simple client using > TLS1.2 > > > > $ make static > > CC aes.c > > CC aesni.c > > CC arc4.c > > CC aria.c > > CC asn1parse.c > > CC asn1write.c > > CC base64.c > > CC bignum.c > > CC blowfish.c > > CC camellia.c > > CC ccm.c > > CC chacha20.c > > CC chachapoly.c > > CC cipher.c > > CC cipher_wrap.c > > CC cmac.c > > CC ctr_drbg.c > > CC des.c > > CC dhm.c > > CC ecdh.c > > CC ecdsa.c > > CC ecjpake.c > > CC ecp.c > > CC ecp_curves.c > > CC entropy.c > > CC entropy_poll.c > > entropy_poll.c:56:2: #error "Platform entropy sources only work on > > Unix and Windows, see MBEDTLS_NO_PLATFORM_ENTROPY in config.h" > > Makefile:285: recipe for target 'entropy_poll.o' failed > > make: *** [entropy_poll.o] Error 1 > > > > BTW the article is not > > found https://tls.mbed.org/kb/how-to/add-a-random-generator. > > <https://tls.mbed.org/kb/how-to/add-a-random-generator.> > > > > Many thanks!! > > > > > > On Tue, May 19, 2020 at 9:01 AM Hanno Becker > <Hanno.Becker(a)arm.com<mailto:Hanno.Becker@arm.com> <mailto:Hanno.Becker@arm.com<mailto:Hanno.Becker@arm.com>> > > <mailto:Hanno.Becker@arm.com<mailto:Hanno.Becker@arm.com> <mailto:Hanno.Becker@arm.com<mailto:Hanno.Becker@arm.com>>>> wrote: > > > > Hi Palomo, > > > > Please take a look at the recent > > > thread https://lists.trustedfirmware.org/pipermail/mbed-tls/2020-April/000069.html > > which should give you a better understanding of how Mbed TLS > > manages and uses entropy from the underlying system. > > > > Regards, > > Hanno > > > ------------------------------------------------------------------------ > > *From:* mbed-tls <mbed-tls-bounces(a)lists.trustedfirmware.org<mailto:mbed-tls-bounces@lists.trustedfirmware.org> > <mailto:mbed-tls-bounces@lists.trustedfirmware.org<mailto:mbed-tls-bounces@lists.trustedfirmware.org>> > > <mailto:mbed-tls-bounces@lists.trustedfirmware.org<mailto:mbed-tls-bounces@lists.trustedfirmware.org> > <mailto:mbed-tls-bounces@lists.trustedfirmware.org<mailto:mbed-tls-bounces@lists.trustedfirmware.org>>>> on behalf of > > Jesus Gualberto Palomo Garcia via mbed-tls > > <mbed-tls(a)lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org> > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org>> > > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org> > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org>>>> > > *Sent:* Tuesday, May 19, 2020 2:56 PM > > *To:* mbed-tls(a)lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org> > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org>> > > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org> > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org>>> > > <mbed-tls(a)lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org> > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org>> > > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org> > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org>>>> > > *Subject:* [mbed-tls] support mbedTLS no entropy source > > > > Hi all! > > > > I'm Palomo and I've been working with your library a few weeks > > ago, I'm using Linux kernel 2.60 but my embedded system has a > > limit entropy source, i now that this is a critical point, > but How > > can I use your library if I want to use a other entropy source? > > > > Thanks and waiting for you! > > > > -- > > *¡Saludos! Best wishes!* > > * > > * > > * > > /*Jesus** Palomo*/ > > > > México, D.F. > > > > * > > > > > > > > -- > > *¡Saludos! Best wishes!* > > * > > * > > * > > /*Jesus** Palomo*/ > > > > México, D.F. > > > > * > > > > -- > mbed-tls mailing list > mbed-tls(a)lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org> > <mailto:mbed-tls@lists.trustedfirmware.org<mailto:mbed-tls@lists.trustedfirmware.org>> > https://lists.trustedfirmware.org/mailman/listinfo/mbed-tls > > > > -- > *¡Saludos! Best wishes!* > * > * > * > /*Jesus** Palomo*/ > > México, D.F. > > * -- ¡Saludos! Best wishes! Jesus Palomo México, D.F.

5 years

1
0
0 0

Re: [mbed-tls] support mbedTLS no entropy source

by Jesus Gualberto Palomo Garcia

Hello Gilles thanks for your support, yes finally I could compile the library in the architecture that I used, I forced the compilation to entry in the "if _unix_" conditional compilation, but I assume that exist another way to do this. Do you have a example for enable that conditional compilation flags? regarding to my dev/urandom, yes my platform has this feature, the library runs very well, but I just have the point related to "force" the compilation because the library doesn't recognize the unix architecture. Thanks and we keep in touch! Regards from Mexico! BTW If I want to professional training, Do you offered this service? On Mon, May 25, 2020 at 11:07 AM Gilles Peskine via mbed-tls < mbed-tls(a)lists.trustedfirmware.org> wrote: > Hi Palomo, > > You seem to be compiling for a system with a Linux kernel, but with only > a partial Unix userland. The “Unix” code in the entropy_poll module > might work on your system, but it is only enabled if __unix__ or __unix > (or a few others) is defined. > > Can you please try the attached patch? Does your runtime environment > have /dev/urandom ? > > Regarding the knowledge base article, you need to remove the "." > character at the end of the URL: > https://tls.mbed.org/kb/how-to/add-a-random-generator-- > > Gilles Peskine > Mbed TLS developer > > On 19/05/2020 21:43, Jesus Gualberto Palomo Garcia via mbed-tls wrote: > > Hello Hanno, Thanks for your thanks for you quickly replay. > > > > I have an error compilation, I'm using nios2-linux-uclibc for my cross > > compilation and uclinux architecture, > > the linux kernel is 2.60 but I have this error when I try to compile > > the library, I want to use the library as a simple client using TLS1.2 > > > > $ make static > > CC aes.c > > CC aesni.c > > CC arc4.c > > CC aria.c > > CC asn1parse.c > > CC asn1write.c > > CC base64.c > > CC bignum.c > > CC blowfish.c > > CC camellia.c > > CC ccm.c > > CC chacha20.c > > CC chachapoly.c > > CC cipher.c > > CC cipher_wrap.c > > CC cmac.c > > CC ctr_drbg.c > > CC des.c > > CC dhm.c > > CC ecdh.c > > CC ecdsa.c > > CC ecjpake.c > > CC ecp.c > > CC ecp_curves.c > > CC entropy.c > > CC entropy_poll.c > > entropy_poll.c:56:2: #error "Platform entropy sources only work on > > Unix and Windows, see MBEDTLS_NO_PLATFORM_ENTROPY in config.h" > > Makefile:285: recipe for target 'entropy_poll.o' failed > > make: *** [entropy_poll.o] Error 1 > > > > BTW the article is not > > found https://tls.mbed.org/kb/how-to/add-a-random-generator. > > <https://tls.mbed.org/kb/how-to/add-a-random-generator.> > > > > Many thanks!! > > > > > > On Tue, May 19, 2020 at 9:01 AM Hanno Becker <Hanno.Becker(a)arm.com > > <mailto:Hanno.Becker@arm.com>> wrote: > > > > Hi Palomo, > > > > Please take a look at the recent > > thread > https://lists.trustedfirmware.org/pipermail/mbed-tls/2020-April/000069.html > > > which should give you a better understanding of how Mbed TLS > > manages and uses entropy from the underlying system. > > > > Regards, > > Hanno > > > ------------------------------------------------------------------------ > > *From:* mbed-tls <mbed-tls-bounces(a)lists.trustedfirmware.org > > <mailto:mbed-tls-bounces@lists.trustedfirmware.org>> on behalf of > > Jesus Gualberto Palomo Garcia via mbed-tls > > <mbed-tls(a)lists.trustedfirmware.org > > <mailto:mbed-tls@lists.trustedfirmware.org>> > > *Sent:* Tuesday, May 19, 2020 2:56 PM > > *To:* mbed-tls(a)lists.trustedfirmware.org > > <mailto:mbed-tls@lists.trustedfirmware.org> > > <mbed-tls(a)lists.trustedfirmware.org > > <mailto:mbed-tls@lists.trustedfirmware.org>> > > *Subject:* [mbed-tls] support mbedTLS no entropy source > > > > Hi all! > > > > I'm Palomo and I've been working with your library a few weeks > > ago, I'm using Linux kernel 2.60 but my embedded system has a > > limit entropy source, i now that this is a critical point, but How > > can I use your library if I want to use a other entropy source? > > > > Thanks and waiting for you! > > > > -- > > *¡Saludos! Best wishes!* > > * > > * > > * > > /*Jesus** Palomo*/ > > > > México, D.F. > > > > * > > > > > > > > -- > > *¡Saludos! Best wishes!* > > * > > * > > * > > /*Jesus** Palomo*/ > > > > México, D.F. > > > > * > > > > -- > mbed-tls mailing list > mbed-tls(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/mbed-tls > -- *¡Saludos! Best wishes!* *Jesus PalomoMéxico, D.F.*

5 years

2
2
0 0

Feedback sought on a new PSA Crypto driver interface

by Gilles Peskine

Hello, Arm is seeking early feedback on a proposed interface for cryptographic drivers that can be plugged into an implementation of the PSA Cryptography API. A copy of the current specification is attached. You can find the current draft of the specification of this interface at https://github.com/gilles-peskine-arm/mbedtls/blob/psa-unified-driver-proto… Please note that this is work in progress. The document is not complete yet. At this stage, it is intended to offer a general overview of the design, not as an implementable specification. Our intention is to continue refining this design, however we may change it based on the feedback that we will receive and there is even a small chance that we will abandon it. The primary intent of this specification is to allow manufacturers of cryptographic hardware to distribute drivers that can be added to a pure-software, portable implementation of the PSA Cryptography API such as Mbed TLS. The interface was designed to support three types of hardware: * Cryptographic accelerators that operate on a key which is provided in cleartext at the beginning of the operation. This type of driver can also be used to plug in software engines. * Protected environments that operate on a wrapped key which is stored outside the protected environment. * Protected environments that have internal key storage and operate on keys designated by an identifier. Concretely, a driver manufacturer would distribute: * A JSON file specifying the driver's capabilities. * C headers declaring the types and functions provided by the driver. * The implementation of the functions provided by the driver, either in the form of C source code or in the form of compiled code. Then when an application uses a key: * If the key is in the memory or local storage of the PSA crypto subsystem and a driver is available for the requested cryptographic mechanism, the core (e.g. Mbed TLS) dispatches the cryptographic operation to the driver. * If the key is in local storage and no driver is available, the core performs the cryptographic operation itself. * If the key is in some other location (as specified by its lifetime), the core invokes the protected environment driver corresponding to that location. This proposal supersedes the previous drafts “PSA cryptographic accelerator interface” (psa_crypto_accel.h) and “PSA secure element driver interface” (crypto_se_driver.h). We intend to implement this specification in Mbed TLS in such a way that a platform distributor can combine drivers and distribute C source code, object files or a mixture of the two in their system development kit. In the long term, the accelerator interface defined here will replace the current MBEDTLS_xxx_ALT mechanism. Comments are welcome through the following venues: * Public email to the psa-crypto or mbed-tls mailing list at TrustedFirmware. * Public comments on GitHub on the pull request https://github.com/ARMmbed/mbedtls/pull/3313 . * Private email to <mbed-crypto(a)arm.com>. These emails will only be shared inside Arm. We may use your feedback to influence the design of PSA Crypto, but your identity and the specifics will be kept confidential. We do not have a specific deadline for feedback, however we intend to start implementing this interface in Mbed TLS in June 2020, so feedback received later will have a reduced chance of influencing the design if it would entail major changes. Best regards, -- Gilles Peskine Mbed TLS developer and PSA Cryptography architect

5 years

1
0
0 0

2025

2024

2023

2022

2021

2020

mbed-tls