- mbed-tls - lists.trustedfirmware.org

by Manuel Pegourie-Gonnard

Hi Youssouf, I think you're looking for mbedtls_mpi_write_file() - just pass NULL as the file argument to write to stdout. You can use the radix argument to print out hex or decimal. Regards, Manuel. ________________________________ From: mbed-tls <mbed-tls-bounces(a)lists.trustedfirmware.org> on behalf of youssouf sokhona via mbed-tls <mbed-tls(a)lists.trustedfirmware.org> Sent: 25 August 2020 15:40 To: mbed-tls(a)lists.trustedfirmware.org <mbed-tls(a)lists.trustedfirmware.org> Subject: [mbed-tls] Set an MPI and print it Hi everyone, I think you all are fine. I am a beginner on mbedtls, and I wanted to set a dhm context. So, at first, I just want to set the value of the prime P, and the generator G. So to that I wrote the function below : [cid:image001.png@01D67AF5.D43FDE60] To check if it is correctly set, I wanted to print it to see. However, it is not the case. Do you know how to set and print the value ? Thanks, and have a good day Best regards, YS

5 years, 11 months

1
0
0 0

mbedtls handshake failed

by Manu Abraham

Greetings, I am trying to connect from a STM32H7 MCU to a mosquitto peer, Can someone please help me to fix this issue that I have ? I have used the DES3 cipher to create the keys .. openssl genrsa -des3 -out test_ca.key 2048 .. Fiddled quite a bit with buffers, stack, heap and mbedtls config, eventually the communication appears to be working, but the handshake appears to fail. At the client MCU side, I see the mbedtls_ssl_handshake failed message with a return value of 0x7780 Additionally, I do see this message too: ssl_tls.c:5169: got an alert message, type: [2:40] ssl_tls.c:5177: is a fatal alert message (msg 40) But unfortunately, I am unable to make out what the error message means. At the peer, this is what i do see: 1598367067: New connection from 192.168.1.33 on port 8883. 1598367074: OpenSSL Error: error:1417C0C7:SSL routines:tls_process_client_certif icate:peer did not return a certificate 1598367074: Socket error on client <unknown>, disconnecting. 1598368366: mosquitto version 1.6.7 terminating Someone, Please help ! Thanks, Manu ssl_tls.c:8084: => handshake ssl_cli.c:3510: client state: 0 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_cli.c:3510: client state: 1 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_cli.c:0774: => write client hello ssl_cli.c:0811: client hello, max version: [3:3] ssl_cli.c:0821: dumping 'client hello, random bytes' (32 bytes) ssl_cli.c:0821: 0000: 3c ce d6 f9 48 cc 7d 5d 77 24 74 f2 1d 9f 8b aa <...H.}]w$t..... ssl_cli.c:0821: 0010: 4b 0c 20 64 d3 22 d0 ee 5e 3b 83 24 a7 01 ec d9 K. d."..^;.$.... ssl_cli.c:0874: client hello, session id len.: 0 ssl_cli.c:0875: dumping 'client hello, session id' (0 bytes) ssl_cli.c:0921: client hello, add ciphersuite: c02c ssl_cli.c:0921: client hello, add ciphersuite: c02b ssl_cli.c:0921: client hello, add ciphersuite: c030 ssl_cli.c:0921: client hello, add ciphersuite: c02f ssl_cli.c:0934: client hello, got 4 ciphersuites (excluding SCSVs) ssl_cli.c:0943: adding EMPTY_RENEGOTIATION_INFO_SCSV ssl_cli.c:0992: client hello, compress len.: 1 ssl_cli.c:0993: client hello, compress alg.: 0 ssl_cli.c:0186: client hello, adding signature_algorithms extension ssl_cli.c:0271: client hello, adding supported_elliptic_curves extension ssl_cli.c:0336: client hello, adding supported_point_formats extension ssl_cli.c:1070: client hello, total extension length: 38 ssl_tls.c:3184: => write handshake message ssl_tls.c:3343: => write record ssl_tls.c:3420: output record: msgtype = 22, version = [3:3], msglen = 93 ssl_tls.c:3425: dumping 'output record sent to network' (98 bytes) ssl_tls.c:3425: 0000: 16 03 03 00 5d 01 00 00 59 03 03 3c ce d6 f9 48 ....]...Y..<...H .. .. .. .. .. .. .. .. .. .. ssl_tls.c:3425: 0050: 03 01 00 0a 00 06 00 04 00 18 00 17 00 0b 00 02 ................ ssl_tls.c:3425: 0060: 01 00 .. ssl_tls.c:2755: => flush output ssl_tls.c:2773: message length: 98, out_left: 98 ssl_tls.c:2779: ssl->f_send() returned 98 (-0xffffff9e) ssl_tls.c:2807: <= flush output ssl_tls.c:3476: <= write record ssl_tls.c:3320: <= write handshake message ssl_cli.c:1106: <= write client hello ssl_cli.c:3510: client state: 2 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_cli.c:1499: => parse server hello ssl_tls.c:4311: => read record ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 0, nb_want: 5 ssl_tls.c:2720: in_left: 0, nb_want: 5 ssl_tls.c:8094: <= handshake ssl_tls.c:8084: => handshake ssl_cli.c:3510: client state: 2 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_cli.c:1499: => parse server hello ssl_tls.c:4311: => read record ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 0, nb_want: 5 ssl_tls.c:2720: in_left: 0, nb_want: 5 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 5 (-0xfffffffb) ssl_tls.c:2742: <= fetch input ssl_tls.c:4047: dumping 'input record header' (5 bytes) ssl_tls.c:4047: 0000: 16 03 03 00 59 ....Y ssl_tls.c:4053: input record: msgtype = 22, version = [3:3], msglen = 89 ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 5, nb_want: 94 ssl_tls.c:2720: in_left: 5, nb_want: 94 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 89 (-0xffffffa7) ssl_tls.c:2742: <= fetch input ssl_tls.c:4232: dumping 'input record from network' (94 bytes) ssl_tls.c:4232: 0000: 16 03 03 00 59 02 00 00 55 03 03 d1 64 6e e1 0c ....Y...U...dn.. .. .. .. .. .. .. .. .. .. .. ssl_tls.c:4232: 0050: 0d ff 01 00 01 00 00 0b 00 04 03 00 01 02 .............. ssl_tls.c:3624: handshake message: msglen = 89, type = 2, hslen = 89 ssl_tls.c:4385: <= read record ssl_cli.c:1579: dumping 'server hello, version' (2 bytes) ssl_cli.c:1579: 0000: 03 03 .. ssl_cli.c:1600: server hello, current time: 3513020129 ssl_cli.c:1610: dumping 'server hello, random bytes' (32 bytes) ssl_cli.c:1610: 0000: d1 64 6e e1 0c 1f ac 75 77 eb d7 02 24 dd a7 da .dn....uw...$... ssl_cli.c:1610: 0010: 48 f3 50 43 34 10 d8 d9 44 4f 57 4e 47 52 44 01 H.PC4...DOWNGRD. ssl_cli.c:1690: server hello, session id len.: 32 ssl_cli.c:1691: dumping 'server hello, session id' (32 bytes) ssl_cli.c:1691: 0000: 90 8f cc f8 31 63 81 ae aa bf a9 b9 61 1e 78 f6 ....1c......a.x. ssl_cli.c:1691: 0010: 79 b8 26 66 51 99 f4 50 45 d4 21 9b 22 24 4c 63 y.&fQ..PE.!."$Lc ssl_cli.c:1728: no session has been resumed ssl_cli.c:1731: server hello, chosen ciphersuite: c030 ssl_cli.c:1732: server hello, compress alg.: 0 ssl_cli.c:1764: server hello, chosen ciphersuite: TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 ssl_cli.c:1789: server hello, total extension length: 13 ssl_cli.c:1809: found renegotiation extension ssl_cli.c:1888: found supported_point_formats extension ssl_cli.c:1292: point format selected: 0 ssl_cli.c:1978: <= parse server hello ssl_cli.c:3510: client state: 3 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_tls.c:5655: => parse certificate ssl_tls.c:4311: => read record ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 0, nb_want: 5 ssl_tls.c:2720: in_left: 0, nb_want: 5 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 5 (-0xfffffffb) ssl_tls.c:2742: <= fetch input ssl_tls.c:4047: dumping 'input record header' (5 bytes) ssl_tls.c:4047: 0000: 16 03 03 07 80 ..... ssl_tls.c:4053: input record: msgtype = 22, version = [3:3], msglen = 1920 ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 5, nb_want: 1925 ssl_tls.c:2720: in_left: 5, nb_want: 1925 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 1361 (-0xfffffaaf) ssl_tls.c:2720: in_left: 1366, nb_want: 1925 ssl_tls.c:8094: <= handshake ssl_tls.c:8084: => handshake ssl_cli.c:3510: client state: 3 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_tls.c:5655: => parse certificate ssl_tls.c:4311: => read record ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 1366, nb_want: 5 ssl_tls.c:2742: <= fetch input ssl_tls.c:4047: dumping 'input record header' (5 bytes) ssl_tls.c:4047: 0000: 16 03 03 07 80 ..... ssl_tls.c:4053: input record: msgtype = 22, version = [3:3], msglen = 1920 ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 1366, nb_want: 1925 ssl_tls.c:2720: in_left: 1366, nb_want: 1925 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 559 (-0xfffffdd1) ssl_tls.c:2742: <= fetch input ssl_tls.c:4232: dumping 'input record from network' (1925 bytes) ssl_tls.c:4232: 0000: 16 03 03 07 80 0b 00 07 7c 00 07 79 00 03 90 30 ........|..y...0 .. .. .. .. .. .. .. .. .. .. ssl_tls.c:4232: 0770: df d8 30 17 65 70 2a 02 54 9a 4c cf b1 51 04 25 ..0.ep*.T.L..Q.% ssl_tls.c:4232: 0780: 83 2c ab dd 46 .,..F ssl_tls.c:3624: handshake message: msglen = 1920, type = 11, hslen = 1920 ssl_tls.c:4385: <= read record ssl_tls.c:5606: peer certificate #1: ssl_tls.c:5606: cert. version : 1 ssl_tls.c:5606: serial number : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ssl_tls.c:5606: issuer name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ssl_tls.c:5606: subject name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ssl_tls.c:5606: issued on : 2020-08-15 09:12:30 ssl_tls.c:5606: expires on : 2030-08-13 09:12:30 ssl_tls.c:5606: signed using : RSA with SHA-256 ssl_tls.c:5606: RSA key size : 2048 bits ssl_tls.c:5606: value of 'crt->rsa.N' (2048 bits) is: ssl_tls.c:5606: c9 93 0d f4 7b 93 95 8f 4d ec bb 77 46 82 48 6d .. .. .. .. .. .. .. .. .. .. ssl_tls.c:5606: 0f 00 85 cf c9 40 b0 f8 b2 df 1b 75 bd 2e 95 43 ssl_tls.c:5606: value of 'crt->rsa.E' (17 bits) is: ssl_tls.c:5606: 01 00 01 ssl_tls.c:5606: peer certificate #2: ssl_tls.c:5606: cert. version : 3 ssl_tls.c:5606: serial number : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ssl_tls.c:5606: issuer name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ssl_tls.c:5606: subject name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ssl_tls.c:5606: issued on : 2020-08-15 08:54:30 ssl_tls.c:5606: expires on : 2030-08-13 08:54:30 ssl_tls.c:5606: signed using : RSA with SHA-256 ssl_tls.c:5606: RSA key size : 2048 bits ssl_tls.c:5606: basic constraints : CA=true ssl_tls.c:5606: value of 'crt->rsa.N' (2048 bits) is: ssl_tls.c:5606: c4 e2 4b 37 45 4a 36 e5 b0 14 f7 fa 76 1d c4 29 .. .. .. .. .. .. .. .. .. .. ssl_tls.c:5606: 43 7c 19 f2 b0 dc ef 69 cf 13 c4 cb fa 80 92 f1 ssl_tls.c:5606: value of 'crt->rsa.E' (17 bits) is: ssl_tls.c:5606: 01 00 01 ssl_tls.c:5856: Certificate verification flags clear ssl_tls.c:5863: <= parse certificate ssl_cli.c:3510: client state: 4 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_cli.c:2336: => parse server key exchange ssl_tls.c:4311: => read record ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 0, nb_want: 5 ssl_tls.c:2720: in_left: 0, nb_want: 5 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 5 (-0xfffffffb) ssl_tls.c:2742: <= fetch input ssl_tls.c:4047: dumping 'input record header' (5 bytes) ssl_tls.c:4047: 0000: 16 03 03 01 4d ....M ssl_tls.c:4053: input record: msgtype = 22, version = [3:3], msglen = 333 ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 5, nb_want: 338 ssl_tls.c:2720: in_left: 5, nb_want: 338 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 333 (-0xfffffeb3) ssl_tls.c:2742: <= fetch input ssl_tls.c:4232: dumping 'input record from network' (338 bytes) ssl_tls.c:4232: 0000: 16 03 03 01 4d 0c 00 01 49 03 00 17 41 04 6e 49 ....M...I...A.nI .. .. .. .. .. .. .. .. .. .. ssl_tls.c:4232: 0140: c4 4b 34 2f 83 5f 98 17 39 5e 6e 4d 56 f4 c1 4c .K4/._..9^nMV..L ssl_tls.c:4232: 0150: 39 0f 9. ssl_tls.c:3624: handshake message: msglen = 333, type = 12, hslen = 333 ssl_tls.c:4385: <= read record ssl_cli.c:2424: dumping 'server key exchange' (329 bytes) ssl_cli.c:2424: 0000: 03 00 17 41 04 6e 49 4b 1c 4e 7b 2b ff c3 c9 9b ...A.nIK.N{+.... .. .. .. .. .. .. .. .. .. .. ssl_cli.c:2424: 0130: d9 33 d2 6e a7 05 ca c4 4b 34 2f 83 5f 98 17 39 .3.n....K4/._..9 ssl_cli.c:2424: 0140: 5e 6e 4d 56 f4 c1 4c 39 0f ^nMV..L9. ssl_cli.c:2044: ECDH curve: secp256r1 ssl_cli.c:2054: value of 'ECDH: Qp(X)' (255 bits) is: ssl_cli.c:2054: 6e 49 4b 1c 4e 7b 2b ff c3 c9 9b 81 29 4d a8 92 ssl_cli.c:2054: af c2 77 2b 3b c6 26 ba d4 c7 a2 2d 83 78 e3 54 ssl_cli.c:2054: value of 'ECDH: Qp(Y)' (256 bits) is: ssl_cli.c:2054: d6 91 fe 18 70 fb bc b6 c7 aa 67 1c 08 8b 4d 58 ssl_cli.c:2054: a4 70 59 97 90 23 8d 4b b6 24 4e 1a 7e 13 f2 d1 ssl_cli.c:2278: Server used SignatureAlgorithm 1 ssl_cli.c:2279: Server used HashAlgorithm 4 ssl_cli.c:2580: dumping 'signature' (256 bytes) ssl_cli.c:2580: 0000: b3 88 25 7f 3f 6b cf 7e 03 de 11 5b 4f 47 e9 6e ..%.?k.~...[OG.n .. .. .. .. .. .. .. .. .. .. ssl_cli.c:2580: 00f0: 34 2f 83 5f 98 17 39 5e 6e 4d 56 f4 c1 4c 39 0f 4/._..9^nMV..L9. ssl_cli.c:2616: dumping 'parameters hash' (32 bytes) ssl_cli.c:2616: 0000: bc 4e 7e a6 a6 02 76 66 2c da 19 6c ea 5a aa df .N~...vf,..l.Z.. ssl_cli.c:2616: 0010: ae 3a ff e9 34 c6 d1 72 98 b4 f3 7d b8 71 11 65 .:..4..r...}.q.e ssl_cli.c:2664: <= parse server key exchange ssl_cli.c:3510: client state: 5 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_cli.c:2697: => parse certificate request ssl_tls.c:4311: => read record ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 0, nb_want: 5 ssl_tls.c:2720: in_left: 0, nb_want: 5 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 5 (-0xfffffffb) ssl_tls.c:2742: <= fetch input ssl_tls.c:4047: dumping 'input record header' (5 bytes) ssl_tls.c:4047: 0000: 16 03 03 00 3a ....: ssl_tls.c:4053: input record: msgtype = 22, version = [3:3], msglen = 58 ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 5, nb_want: 63 ssl_tls.c:2720: in_left: 5, nb_want: 63 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 58 (-0xffffffc6) ssl_tls.c:2742: <= fetch input ssl_tls.c:4232: dumping 'input record from network' (63 bytes) ssl_tls.c:4232: 0000: 16 03 03 00 3a 0d 00 00 36 03 01 02 40 00 2e 04 ....:...6...@... .. .. .. .. .. .. .. .. .. .. ssl_tls.c:4232: 0030: 01 02 01 03 02 02 02 04 02 05 02 06 02 00 00 ............... ssl_tls.c:3624: handshake message: msglen = 58, type = 13, hslen = 58 ssl_tls.c:4385: <= read record ssl_cli.c:2723: got a certificate request ssl_cli.c:2823: Supported Signature Algorithm found: 4,3 ssl_cli.c:2823: Supported Signature Algorithm found: 5,3 ssl_cli.c:2823: Supported Signature Algorithm found: 6,3 ssl_cli.c:2823: Supported Signature Algorithm found: 8,7 ssl_cli.c:2823: Supported Signature Algorithm found: 8,8 ssl_cli.c:2823: Supported Signature Algorithm found: 8,9 ssl_cli.c:2823: Supported Signature Algorithm found: 8,10 ssl_cli.c:2823: Supported Signature Algorithm found: 8,11 ssl_cli.c:2823: Supported Signature Algorithm found: 8,4 ssl_cli.c:2823: Supported Signature Algorithm found: 8,5 ssl_cli.c:2823: Supported Signature Algorithm found: 8,6 ssl_cli.c:2823: Supported Signature Algorithm found: 4,1 ssl_cli.c:2823: Supported Signature Algorithm found: 5,1 ssl_cli.c:2823: Supported Signature Algorithm found: 6,1 ssl_cli.c:2823: Supported Signature Algorithm found: 3,3 ssl_cli.c:2823: Supported Signature Algorithm found: 2,3 ssl_cli.c:2823: Supported Signature Algorithm found: 3,1 ssl_cli.c:2823: Supported Signature Algorithm found: 2,1 ssl_cli.c:2823: Supported Signature Algorithm found: 3,2 ssl_cli.c:2823: Supported Signature Algorithm found: 2,2 ssl_cli.c:2823: Supported Signature Algorithm found: 4,2 ssl_cli.c:2823: Supported Signature Algorithm found: 5,2 ssl_cli.c:2823: Supported Signature Algorithm found: 6,2 ssl_cli.c:2846: <= parse certificate request ssl_cli.c:3510: client state: 6 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_cli.c:2856: => parse server hello done ssl_tls.c:4311: => read record ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 0, nb_want: 5 ssl_tls.c:2720: in_left: 0, nb_want: 5 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 5 (-0xfffffffb) ssl_tls.c:2742: <= fetch input ssl_tls.c:4047: dumping 'input record header' (5 bytes) ssl_tls.c:4047: 0000: 16 03 03 00 04 ..... ssl_tls.c:4053: input record: msgtype = 22, version = [3:3], msglen = 4 ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 5, nb_want: 9 ssl_tls.c:2720: in_left: 5, nb_want: 9 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 4 (-0xfffffffc) ssl_tls.c:2742: <= fetch input ssl_tls.c:4232: dumping 'input record from network' (9 bytes) ssl_tls.c:4232: 0000: 16 03 03 00 04 0e 00 00 00 ......... ssl_tls.c:3624: handshake message: msglen = 4, type = 14, hslen = 4 ssl_tls.c:4385: <= read record ssl_cli.c:2886: <= parse server hello done ssl_cli.c:3510: client state: 7 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_tls.c:5329: => write certificate ssl_tls.c:3184: => write handshake message ssl_tls.c:3343: => write record ssl_tls.c:3420: output record: msgtype = 22, version = [3:3], msglen = 7 ssl_tls.c:3425: dumping 'output record sent to network' (12 bytes) ssl_tls.c:3425: 0000: 16 03 03 00 07 0b 00 00 03 00 00 00 ............ ssl_tls.c:2755: => flush output ssl_tls.c:2773: message length: 12, out_left: 12 ssl_tls.c:2779: ssl->f_send() returned 12 (-0xfffffff4) ssl_tls.c:2807: <= flush output ssl_tls.c:3476: <= write record ssl_tls.c:3320: <= write handshake message ssl_tls.c:5433: <= write certificate ssl_cli.c:3510: client state: 8 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_cli.c:2898: => write client key exchange ssl_cli.c:2977: value of 'ECDH: Q(X)' (256 bits) is: ssl_cli.c:2977: e8 dd a7 e4 3d f4 43 c0 1f 42 67 99 2f 1b bd a8 ssl_cli.c:2977: 10 03 3d 45 5f 3b f8 46 ff d6 b8 65 3c 13 6a 3b ssl_cli.c:2977: value of 'ECDH: Q(Y)' (256 bits) is: ssl_cli.c:2977: 9a f8 36 4d 19 01 01 02 d6 bb 51 4a 1d ec f1 7f ssl_cli.c:2977: 28 70 31 95 65 62 1e d6 8d 97 b6 cc 3f b4 9a 8e ssl_cli.c:3005: value of 'ECDH: z' (253 bits) is: ssl_cli.c:3005: 14 06 75 26 fd 2c 2e 3f ad cf 0c fe 6b df 66 7c ssl_cli.c:3005: c2 b7 54 7e 62 ea 4e 0b 93 d0 62 22 15 e6 db 43 ssl_tls.c:3184: => write handshake message ssl_tls.c:3343: => write record ssl_tls.c:3420: output record: msgtype = 22, version = [3:3], msglen = 70 ssl_tls.c:3425: dumping 'output record sent to network' (75 bytes) ssl_tls.c:3425: 0000: 16 03 03 00 46 10 00 00 42 41 04 e8 dd a7 e4 3d ....F...BA.....= .. .. .. .. .. .. .. .. .. .. ssl_tls.c:3425: 0040: 62 1e d6 8d 97 b6 cc 3f b4 9a 8e b......?... ssl_tls.c:2755: => flush output ssl_tls.c:2773: message length: 75, out_left: 75 ssl_tls.c:2779: ssl->f_send() returned 75 (-0xffffffb5) ssl_tls.c:2807: <= flush output ssl_tls.c:3476: <= write record ssl_tls.c:3320: <= write handshake message ssl_cli.c:3172: <= write client key exchange ssl_cli.c:3510: client state: 9 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_cli.c:3224: => write certificate verify ssl_tls.c:0628: => derive keys ssl_tls.c:0705: dumping 'premaster secret' (32 bytes) ssl_tls.c:0705: 0000: 14 06 75 26 fd 2c 2e 3f ad cf 0c fe 6b df 66 7c ..u&.,.?....k.f| ssl_tls.c:0705: 0010: c2 b7 54 7e 62 ea 4e 0b 93 d0 62 22 15 e6 db 43 ..T~b.N...b"...C ssl_tls.c:0794: ciphersuite = TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 ssl_tls.c:0796: dumping 'master secret' (48 bytes) ssl_tls.c:0796: 0000: 5a 15 26 c7 71 73 1a 2e 8c 0d 0e 55 d7 6f 7f b5 Z.&.qs.....U.o.. .. .. .. .. .. .. .. .. .. .. ssl_tls.c:0796: 0020: 24 bf 3f 51 ca e9 7b 66 99 61 cf a9 fb 61 e2 2f $.?Q..{f.a...a./ ssl_tls.c:0797: dumping 'random bytes' (64 bytes) ssl_tls.c:0797: 0000: d1 64 6e e1 0c 1f ac 75 77 eb d7 02 24 dd a7 da .dn....uw...$... .. .. .. .. .. .. .. .. .. .. ssl_tls.c:0797: 0030: 4b 0c 20 64 d3 22 d0 ee 5e 3b 83 24 a7 01 ec d9 K. d."..^;.$.... ssl_tls.c:0798: dumping 'key block' (256 bytes) ssl_tls.c:0798: 0000: 5d b4 7a 60 2e 5b f8 fb 8f e4 75 22 9a b4 8c 04 ].z`.[....u".... .. .. .. .. .. .. .. .. .. .. ssl_tls.c:0798: 00f0: 53 af 8e 78 d0 03 ca 26 b7 43 ee c6 aa 0e 71 88 S..x...&.C....q. ssl_tls.c:0919: keylen: 32, minlen: 24, ivlen: 12, maclen: 0 ssl_tls.c:1116: <= derive keys ssl_cli.c:3253: <= skip write certificate verify ssl_cli.c:3510: client state: 10 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_tls.c:5879: => write change cipher spec ssl_tls.c:3184: => write handshake message ssl_tls.c:3343: => write record ssl_tls.c:3420: output record: msgtype = 20, version = [3:3], msglen = 1 ssl_tls.c:3425: dumping 'output record sent to network' (6 bytes) ssl_tls.c:3425: 0000: 14 03 03 00 01 01 ...... ssl_tls.c:2755: => flush output ssl_tls.c:2773: message length: 6, out_left: 6 ssl_tls.c:2779: ssl->f_send() returned 6 (-0xfffffffa) ssl_tls.c:2807: <= flush output ssl_tls.c:3476: <= write record ssl_tls.c:3320: <= write handshake message ssl_tls.c:5893: <= write change cipher spec ssl_cli.c:3510: client state: 11 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_tls.c:6398: => write finished ssl_tls.c:6272: => calc finished tls sha384 ssl_tls.c:6283: dumping 'finished sha512 state' (64 bytes) ssl_tls.c:6283: 0000: e2 6c 37 56 90 66 0a f8 1c c7 26 d0 49 a9 87 52 .l7V.f....&.I..R .. .. .. .. .. .. .. .. .. .. ssl_tls.c:6283: 0030: 85 b3 04 84 77 e5 02 b0 53 d7 31 b4 c4 e4 08 c0 ....w...S.1..... ssl_tls.c:6296: dumping 'calc finished result' (12 bytes) ssl_tls.c:6296: 0000: c4 6a dd c2 9b a7 75 28 ff 53 5a 3f .j....u(.SZ? ssl_tls.c:6302: <= calc finished ssl_tls.c:6443: switching to new transform spec for outbound data ssl_tls.c:3184: => write handshake message ssl_tls.c:3343: => write record ssl_tls.c:1445: => encrypt buf ssl_tls.c:1455: dumping 'before encrypt: output payload' (16 bytes) ssl_tls.c:1455: 0000: 14 00 00 0c c4 6a dd c2 9b a7 75 28 ff 53 5a 3f .....j....u(.SZ? ssl_tls.c:1574: dumping 'additional data for AEAD' (13 bytes) ssl_tls.c:1574: 0000: 00 00 00 00 00 00 00 00 16 03 03 00 10 ............. ssl_tls.c:1604: dumping 'IV used (internal)' (12 bytes) ssl_tls.c:1604: 0000: a0 9a 1f cb 00 00 00 00 00 00 00 00 ............ ssl_tls.c:1606: dumping 'IV used (transmitted)' (8 bytes) ssl_tls.c:1606: 0000: 00 00 00 00 00 00 00 00 ........ ssl_tls.c:1616: before encrypt: msglen = 24, including 0 bytes of padding ssl_tls.c:1643: dumping 'after encrypt: tag' (16 bytes) ssl_tls.c:1643: 0000: e7 10 1d 99 f6 b6 a5 40 de e8 c0 d5 ec 48 de 6e .......@.....H.n ssl_tls.c:1781: <= encrypt buf ssl_tls.c:3420: output record: msgtype = 22, version = [3:3], msglen = 40 ssl_tls.c:3425: dumping 'output record sent to network' (45 bytes) ssl_tls.c:3425: 0000: 16 03 03 00 28 00 00 00 00 00 00 00 00 00 73 7e ....(.........s~ .. .. .. .. .. .. .. .. .. .. ssl_tls.c:3425: 0020: 99 f6 b6 a5 40 de e8 c0 d5 ec 48 de 6e ....@.....H.n ssl_tls.c:2755: => flush output ssl_tls.c:2773: message length: 45, out_left: 45 ssl_tls.c:2779: ssl->f_send() returned 45 (-0xffffffd3) ssl_tls.c:2807: <= flush output ssl_tls.c:3476: <= write record ssl_tls.c:3320: <= write handshake message ssl_tls.c:6507: <= write finished ssl_cli.c:3510: client state: 12 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_tls.c:5902: => parse change cipher spec ssl_tls.c:4311: => read record ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 0, nb_want: 5 ssl_tls.c:2720: in_left: 0, nb_want: 5 ssl_tls.c:8094: <= handshake ssl_tls.c:8084: => handshake ssl_cli.c:3510: client state: 12 ssl_tls.c:2755: => flush output ssl_tls.c:2767: <= flush output ssl_tls.c:5902: => parse change cipher spec ssl_tls.c:4311: => read record ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 0, nb_want: 5 ssl_tls.c:2720: in_left: 0, nb_want: 5 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 5 (-0xfffffffb) ssl_tls.c:2742: <= fetch input ssl_tls.c:4047: dumping 'input record header' (5 bytes) ssl_tls.c:4047: 0000: 15 03 03 00 02 ..... ssl_tls.c:4053: input record: msgtype = 21, version = [3:3], msglen = 2 ssl_tls.c:2536: => fetch input ssl_tls.c:2696: in_left: 5, nb_want: 7 ssl_tls.c:2720: in_left: 5, nb_want: 7 ssl_tls.c:2722: ssl->f_recv(_timeout)() returned 2 (-0xfffffffe) ssl_tls.c:2742: <= fetch input ssl_tls.c:4232: dumping 'input record from network' (7 bytes) ssl_tls.c:4232: 0000: 15 03 03 00 02 02 28 ......( ssl_tls.c:5169: got an alert message, type: [2:40] ssl_tls.c:5177: is a fatal alert message (msg 40) ssl_tls.c:4369: mbedtls_ssl_handle_message_type() returned -30592 (-0x7780) ssl_tls.c:5906: mbedtls_ssl_read_record() returned -30592 (-0x7780) ssl_tls.c:8094: <= handshake mbedtls_ssl_handshake failed: -30592

5 years, 11 months

1
0
0 0

Set an MPI and print it

by youssouf sokhona

Hi everyone, I think you all are fine. I am a beginner on mbedtls, and I wanted to set a dhm context. So, at first, I just want to set the value of the prime P, and the generator G. So to that I wrote the function below : [cid:image001.png@01D67AF5.D43FDE60] To check if it is correctly set, I wanted to print it to see. However, it is not the case. Do you know how to set and print the value ? Thanks, and have a good day Best regards, YS

5 years, 11 months

1
0
0 0

undefined reference….

by youssouf sokhona

Hello everybody, I hope you are going well I am creating a diffie Hellman key exchange program, so I am using functions like « mbedtls_dhm_init() » or « mbedtls_ctr_drbg_init() « for example. However, even if I defined the CTR_DRBG & the DHM_C module in the config.h file, and the header in my C file, I Always have error like that : [cid:image002.png@01D6770C.20370D40] Can someone help me to find out where does it come from ? Because I don’t know at all. Thanks, and have a good day

5 years, 12 months

1
0
0 0

Printf with %z and %hh format specifiers.

by Paul Elliott

Hi all, I am placing into review a patch ( https://github.com/ARMmbed/mbedtls/pull/3579) which replaces some invalid size printf format specifiers, mostly for size_t. This patch utilises %zu and %hhu, both of which were only introduced in C99, which I know caused some issues with compiler compatibility at the time. The problem with printf and size_t as most will know, is that its a different size in 32 bit and 64 bit, which is what %z was introduced to safely fix. My question is to whether there is anyone on the list that is using a compiler that might not handle these specifiers, for whom this patch would presumably be something of an issue. I am admittedly hoping this is not the case, given the age of the spec, but thought it best to ask. Thanks in advance, Paul.

5 years, 12 months

1
0
0 0

Re: [mbed-tls] Custom PSA API Implementation for mbedTLS tests

by Dan Handley

Hi Murat What you request may be possible with invasive changes but it is not a design goal for the PSA Cryptography API implementation in Mbed TLS to be completely replaced with an alternative implementation, while allowing re-use of the Mbed TLS build system and tests. The focus instead is to develop and implement a PSA Cryptoprocessor Driver Interface, which will allow drivers for custom secure environments to be plugged into the core PSA Cryptography API implementation in Mbed TLS. An early version of the specification of that interface can be found here: https://github.com/ARMmbed/mbedtls/blob/development/docs/proposed/psa-drive… That specification and its implementation is under active development. Let us know if you would like to get involved. Regards Dan. From: mbed-tls <mbed-tls-bounces(a)lists.trustedfirmware.org> On Behalf Of Murat Cakmak via mbed-tls Sent: 14 August 2020 13:34 To: mbed-tls(a)lists.trustedfirmware.org Subject: [mbed-tls] Custom PSA API Implementation for mbedTLS tests Hi all, We have implemented the PSA Functional API for a custom secure environment which passes PSA Arch tests. Now we would like to run mbedtls tests (make check) on the PSA API if possible. When we run "make check", it includes and compiles library/psa_crypto.c file for mbedTLS's PSA API Implementation. Herein, we would like to compile our own psa_crypto.c implementation, does mbedtls build system allow us to include custom PSA API Implementation to run tests? Thank you. Murat

6 years

1
0
0 0

Re: [mbed-tls] MBEDTLS_ENTROPY_HARDWARE_ALT, mbedtls_ctr_drbg_seed() freezes ?

by Manu Abraham

Replying to my own post, I did dig in a bit more; It appears that it gets stuck in here within: int mbedtls_ctr_drbg_reseed( mbedtls_ctr_drbg_context *ctx, const unsigned char *additional, size_t len ) memset( seed, 0, MBEDTLS_CTR_DRBG_MAX_SEED_INPUT ); printf("(%d) %s: Done\r\n", __LINE__, __FUNCTION__); <---- line#412 /* * Gather entropy_len bytes of entropy to seed state */ if( 0 != ctx->f_entropy( ctx->p_entropy, seed, ctx->entropy_len ) ) <----- appears to be stuck in this callback f_entropy() { return( MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED ); } seedlen += ctx->entropy_len; printf("(%d) %s: Done\r\n", __LINE__, __FUNCTION__); <----- line #424 Sprinkling a few prints here and there, it looks thus: (174) tls_init: Initializing (178) tls_init: SSL initialize (181) tls_init: SSL Config initialized (184) tls_init: x509 CRT initialized (187) tls_init: DRBG initialized (190) tls_init: Entropy initialized (95) mbedtls_ctr_drbg_seed_entropy_len: AES initialized (112) mbedtls_ctr_drbg_seed_entropy_len: AES setkey enc (412) mbedtls_ctr_drbg_reseed: Done (1027) mbedtls_hardware_poll: Random Words: 128 Word: 834688558 Someone help ? Thanks, Manu On Mon, Aug 17, 2020 at 10:46 PM Manu Abraham via mbed-tls <mbed-tls(a)lists.trustedfirmware.org> wrote: > > Greetings, > > I am new to the list, please do excuse me, in case of any list > specific etiquette issues. > > Trying to use a 1.6.1 release with a Cortex M7 port, specifically a STM32H7. > > After enabling MBEDTLS_ENTROPY_HARDWARE_ALT, did implement > mbedtls_hardware_poll() > > It looks thus, and it does appear to work from a hardware perspective: > > /** > * mbedtls_hardware_poll() > * Read random data from the Hardware RNG for entropy applications > */ > int mbedtls_hardware_poll(void *arg, > unsigned char *ent_buf, > size_t count, > size_t *ent_len) > { > register uint8_t i = 0; > uint32_t rand; > > if (!LL_RNG_IsEnabled(RNG)) > LL_RNG_Enable(RNG); /* Enable Random Number Generator */ > > for (i = 0; i < count; i++) { > while (!LL_RNG_IsActiveFlag_DRDY(RNG)) { } /* Wait for DRDY > flag to be raised */ > if ((LL_RNG_IsActiveFlag_CECS(RNG)) || > (LL_RNG_IsActiveFlag_SECS(RNG))) { /* Check error, if any */ > > /* Clock or Seed Error detected. Set Error */ > printf(" (%d) %s: Clock/Seed Error!\r\n", __LINE__, __FUNCTION__); > } > rand = LL_RNG_ReadRandData32(RNG); /* Read RNG data */ > memcpy(&(ent_buf[i * 4]), &rand, 4); /* *ent_len += 4 */ > } > LL_RNG_Disable(RNG); /* Stop random numbers generation */ > *ent_len = ((i + 1) * 4); > printf(" (%d) %s: Random Words: %d Word: %04d\r\n", > __LINE__, > __FUNCTION__, > count, > rand); > > return 0; > } > > The code which causes the problem is this, in my tls_init() > > int tls_init(void) > { > int ret; > > /* inspired by https://tls.mbed.org/kb/how-to/mbedtls-tutorial */ > const char *pers = "SYS-LWH7"; > > printf(" (%d) %s: Initializing\r\n", __LINE__, __FUNCTION__); > /* initialize descriptors */ > > mbedtls_ssl_init(&ssl); > printf(" (%d) %s: SSL initialize\r\n", __LINE__, __FUNCTION__); > > mbedtls_ssl_config_init(&conf); > printf(" (%d) %s: SSL Config initialized\r\n", __LINE__, __FUNCTION__); > > mbedtls_x509_crt_init(&cacert); > printf(" (%d) %s: x509 CRT initialized\r\n", __LINE__, __FUNCTION__); > > mbedtls_ctr_drbg_init(&ctr_drbg); > printf(" (%d) %s: DRBG initialized\r\n", __LINE__, __FUNCTION__); > > mbedtls_entropy_init(&entropy); > printf(" (%d) %s: Entropy initialized\r\n", __LINE__, __FUNCTION__); > > > ret = mbedtls_ctr_drbg_seed(&ctr_drbg, > mbedtls_entropy_func, > &entropy, > (const unsigned char *) pers, > strlen(pers)); > if (ret) { > > LWIP_DEBUGF(MQTT_APP_DEBUG_TRACE, > ("failed !\n mbedtls_ctr_drbg_seed returned %d\n", > ret)); > > printf(" (%d) %s: DRBG seed failed, ret=%d\r\n", __LINE__, > __FUNCTION__, ret); > return -1; > } > printf(" (%d) %s: DRBG seed returned:%d\r\n", __LINE__, __FUNCTION__, ret); > > /** > * The transport type determines if we are using > * TLS (MBEDTLS_SSL_TRANSPORT_STREAM) or > * DTLS (MBEDTLS_SSL_TRANSPORT_DATAGRAM). > */ > ret = mbedtls_ssl_config_defaults(&conf, > MBEDTLS_SSL_IS_CLIENT, > MBEDTLS_SSL_TRANSPORT_STREAM, > MBEDTLS_SSL_PRESET_DEFAULT); > if (ret) { > LWIP_DEBUGF(MQTT_APP_DEBUG_TRACE, > ("failed !\n mbedtls_ssl_config_defaults returned %d\n\n", > ret)); > > printf("(%d) %s: SSL config defaults failed, ret=%d\r\n", > __LINE__, __FUNCTION__, ret); > return -1; > } > printf("(%d) %s: SSL config defaults returned:%d\r\n", __LINE__, > __FUNCTION__, ret); > > ret = mbedtls_x509_crt_parse(&cacert, > (const unsigned char *)test_ca_crt, > test_ca_crt_len); > if (ret) > printf(" (%d) %s: failed!\n mbedtls_x509_crt_parse returned > %d\r\n", __LINE__, __FUNCTION__, ret); > else > printf(" (%d) %s: mbedtls_x509_crt_parse returned %d\r\n", > __LINE__, __FUNCTION__, ret); > > mbedtls_ssl_conf_ca_chain(&conf, &cacert, NULL); > mbedtls_ssl_conf_authmode(&conf, MBEDTLS_SSL_VERIFY_REQUIRED); > > /** > * The library needs to know which random engine > * to use and which debug function to use as callback. > */ > mbedtls_ssl_conf_rng(&conf, mbedtls_ctr_drbg_random, &ctr_drbg); > mbedtls_ssl_conf_dbg(&conf, my_debug, stdout); > mbedtls_ssl_setup(&ssl, &conf); > } > > > The output of which looks thus, in a serial terminal: > > (1217) print_dhcp_state: Try connect to Broker > (174) tls_init: Initializing > (178) tls_init: SSL initialize > (181) tls_init: SSL Config initialized > (184) tls_init: x509 CRT initialized > (187) tls_init: DRBG initialized > (190) tls_init: Entropy initialized > (1027) mbedtls_hardware_poll: Random Words: 128 Word: -558876895 > > > Any thoughts/ideas, what could be wrong ? > Any kind soul in here ? > > Thanks, > Manu > -- > mbed-tls mailing list > mbed-tls(a)lists.trustedfirmware.org > https://lists.trustedfirmware.org/mailman/listinfo/mbed-tls

6 years

1
0
0 0

MBEDTLS_ENTROPY_HARDWARE_ALT, mbedtls_ctr_drbg_seed() freezes ?

by Manu Abraham

Greetings, I am new to the list, please do excuse me, in case of any list specific etiquette issues. Trying to use a 1.6.1 release with a Cortex M7 port, specifically a STM32H7. After enabling MBEDTLS_ENTROPY_HARDWARE_ALT, did implement mbedtls_hardware_poll() It looks thus, and it does appear to work from a hardware perspective: /** * mbedtls_hardware_poll() * Read random data from the Hardware RNG for entropy applications */ int mbedtls_hardware_poll(void *arg, unsigned char *ent_buf, size_t count, size_t *ent_len) { register uint8_t i = 0; uint32_t rand; if (!LL_RNG_IsEnabled(RNG)) LL_RNG_Enable(RNG); /* Enable Random Number Generator */ for (i = 0; i < count; i++) { while (!LL_RNG_IsActiveFlag_DRDY(RNG)) { } /* Wait for DRDY flag to be raised */ if ((LL_RNG_IsActiveFlag_CECS(RNG)) || (LL_RNG_IsActiveFlag_SECS(RNG))) { /* Check error, if any */ /* Clock or Seed Error detected. Set Error */ printf(" (%d) %s: Clock/Seed Error!\r\n", __LINE__, __FUNCTION__); } rand = LL_RNG_ReadRandData32(RNG); /* Read RNG data */ memcpy(&(ent_buf[i * 4]), &rand, 4); /* *ent_len += 4 */ } LL_RNG_Disable(RNG); /* Stop random numbers generation */ *ent_len = ((i + 1) * 4); printf(" (%d) %s: Random Words: %d Word: %04d\r\n", __LINE__, __FUNCTION__, count, rand); return 0; } The code which causes the problem is this, in my tls_init() int tls_init(void) { int ret; /* inspired by https://tls.mbed.org/kb/how-to/mbedtls-tutorial */ const char *pers = "SYS-LWH7"; printf(" (%d) %s: Initializing\r\n", __LINE__, __FUNCTION__); /* initialize descriptors */ mbedtls_ssl_init(&ssl); printf(" (%d) %s: SSL initialize\r\n", __LINE__, __FUNCTION__); mbedtls_ssl_config_init(&conf); printf(" (%d) %s: SSL Config initialized\r\n", __LINE__, __FUNCTION__); mbedtls_x509_crt_init(&cacert); printf(" (%d) %s: x509 CRT initialized\r\n", __LINE__, __FUNCTION__); mbedtls_ctr_drbg_init(&ctr_drbg); printf(" (%d) %s: DRBG initialized\r\n", __LINE__, __FUNCTION__); mbedtls_entropy_init(&entropy); printf(" (%d) %s: Entropy initialized\r\n", __LINE__, __FUNCTION__); ret = mbedtls_ctr_drbg_seed(&ctr_drbg, mbedtls_entropy_func, &entropy, (const unsigned char *) pers, strlen(pers)); if (ret) { LWIP_DEBUGF(MQTT_APP_DEBUG_TRACE, ("failed !\n mbedtls_ctr_drbg_seed returned %d\n", ret)); printf(" (%d) %s: DRBG seed failed, ret=%d\r\n", __LINE__, __FUNCTION__, ret); return -1; } printf(" (%d) %s: DRBG seed returned:%d\r\n", __LINE__, __FUNCTION__, ret); /** * The transport type determines if we are using * TLS (MBEDTLS_SSL_TRANSPORT_STREAM) or * DTLS (MBEDTLS_SSL_TRANSPORT_DATAGRAM). */ ret = mbedtls_ssl_config_defaults(&conf, MBEDTLS_SSL_IS_CLIENT, MBEDTLS_SSL_TRANSPORT_STREAM, MBEDTLS_SSL_PRESET_DEFAULT); if (ret) { LWIP_DEBUGF(MQTT_APP_DEBUG_TRACE, ("failed !\n mbedtls_ssl_config_defaults returned %d\n\n", ret)); printf("(%d) %s: SSL config defaults failed, ret=%d\r\n", __LINE__, __FUNCTION__, ret); return -1; } printf("(%d) %s: SSL config defaults returned:%d\r\n", __LINE__, __FUNCTION__, ret); ret = mbedtls_x509_crt_parse(&cacert, (const unsigned char *)test_ca_crt, test_ca_crt_len); if (ret) printf(" (%d) %s: failed!\n mbedtls_x509_crt_parse returned %d\r\n", __LINE__, __FUNCTION__, ret); else printf(" (%d) %s: mbedtls_x509_crt_parse returned %d\r\n", __LINE__, __FUNCTION__, ret); mbedtls_ssl_conf_ca_chain(&conf, &cacert, NULL); mbedtls_ssl_conf_authmode(&conf, MBEDTLS_SSL_VERIFY_REQUIRED); /** * The library needs to know which random engine * to use and which debug function to use as callback. */ mbedtls_ssl_conf_rng(&conf, mbedtls_ctr_drbg_random, &ctr_drbg); mbedtls_ssl_conf_dbg(&conf, my_debug, stdout); mbedtls_ssl_setup(&ssl, &conf); } The output of which looks thus, in a serial terminal: (1217) print_dhcp_state: Try connect to Broker (174) tls_init: Initializing (178) tls_init: SSL initialize (181) tls_init: SSL Config initialized (184) tls_init: x509 CRT initialized (187) tls_init: DRBG initialized (190) tls_init: Entropy initialized (1027) mbedtls_hardware_poll: Random Words: 128 Word: -558876895 Any thoughts/ideas, what could be wrong ? Any kind soul in here ? Thanks, Manu

6 years

1
0
0 0

Re: [mbed-tls] LTS roadmap and announcement channel?

by Manuel Pegourie-Gonnard

Hi Simon, Indeed while the migration is underway things can be a bit confusing, so let me try to clarify: * releases can be found at: https://github.com/ARMmbed/mbedtls/releases - near the top you'll alwys find the latest development release followed by the latest LTS releases. At this point it is unclear if releases are going to stay on github or if they would move to trustedfrimware.org in the future, but if anything changes, we'll announce it. * announcements about new releases and other important project events are made on the new Mbed-tls-announce mailing-list: https://github.com/ARMmbed/mbedtls/releases - if you're already subscribed to mbed-tls (this list), you don't need to subscribe to the "announce" mailing list in addition, as any post to "announce" is automatically cross-posted here ("announce" is for people who want a lower volume list). * I don't think we're currently making announcements about upcoming releases, but I know we considered that. Unfortunately I don't remember the details and the colleague who was working on improving our release process is on leave now. But it we start making such announcements, they'll be on the "announce" list. * We're currently planning 2.16.8 early in September. * If you have a large number of products deployed that depend on Mbed TLS (or indeed any other tf.org project) and would like to be notified in advance of upcoming security fixes, please see the following pages: https://developer.trustedfirmware.org/w/mbed-tls/security-center/ https://developer.trustedfirmware.org/w/collaboration/security_center/repor… https://developer.trustedfirmware.org/w/collaboration/security_center/trust… I hope this answers your questions, and feel free to ask otherwise. Manuel. ________________________________ From: mbed-tls <mbed-tls-bounces(a)lists.trustedfirmware.org> on behalf of Simon Leet via mbed-tls <mbed-tls(a)lists.trustedfirmware.org> Sent: 14 August 2020 15:13 To: mbed-tls(a)lists.trustedfirmware.org <mbed-tls(a)lists.trustedfirmware.org> Subject: [mbed-tls] LTS roadmap and announcement channel? Hi folks, I understand that https://tls.mbed.org/ has migrated under the umbrella of https://www.trustedfirmware.org/ but it’s not clear where I should turn to for information about the updates to the LTS versions. The https://tls.mbed.org/tech-updates blog used to announce LTS branch updates but seems defunct as of 2.16.7, and I can’t find equivalent information in https://developer.trustedfirmware.org/w/mbed-tls/roadmap/, https://github.com/ARMmbed/mbedtls/projects/2 or the generic https://www.trustedfirmware.org/blog/. Is there a new channel for information about upcoming LTS mbedtls releases so that users can plan their appropriate upgrade cycles? E.g. when is 2.16.8 roughly expected to be released? Is the new model for monitoring release announcements reliably going to be as a new tag on https://github.com/ARMmbed/mbedtls/tags? -Simon

6 years

1
0
0 0

MbedTLS_hardware_poll

by youssouf sokhona

Hi everyone, Hope you are still going well I am now working on MbedTLS to establish a key exchange with a BGM which has a TRNG , and I read that I have to implement myself a function called «mbedTLS_hardware_poll » But I have no idea to know how I can implement this function zlthough I read articles on the mbedtls.com about entropy site…. Can you help me, to know how I can implement this function ?

6 years

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

mbed-tls