mbed-tls June 2021

mbed-tls@lists.trustedfirmware.org

19 participants
33 discussions

by stefano664

Hi all, I'm using mbedTLS libraries with an OPTIGA cryptochip. At the moment, when I call the sign function: err = mbedtls_pk_sign(&priv_key, MBEDTLS_MD_SHA384, hash, 0, sign, &olen, mbedtls_ctr_drbg_random, &ctr_drbg); I need to pass it a valid private key else if it isn't used, because alternative sign routine use the one into cryptochip. It is possible to avoid passing this key? Best regards, Stefano Mologni

2 years, 10 months

Please help regarding [ERR ][TLSx]: mbedtls_ssl_handshake() failed: -0x7780 (-30592): SSL

by victor Wolff

Hello I am relatively new to mbedTLS, but I'm trying to develop an MQTT client running on an STM32 board connected to an ESP8266 MCU/WiFi module. The client should publish messages to a local broker/server where I am using Mosquitto for that purpose. I want to test different Cipher suites but when I limiting the Server to only accept one particle Cipher suite I receive an error from the server point of view "1622667145: OpenSSL Error[0]: error:1417A0C1:SSL routines:tls_post_process_client_hello:no shared cipher" Which I find is strange because when I read through the debug list presented below it says "[DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c02c". I "think" I have enabled the "MBEDTLS_SHA256_C" in the config file (mbed_lib.json) for the TLSsocket, and the cipher suites I have tested so far to limit it for is: DHE-RSA-AES128-SHA |AES128-SHA | DHE-RSA-AES128-SHA256. Could you please look at the debug list presented below to see if anything looks suspicious, or if you have any ideas? because I am truly lost and I am shooting in the dark trying to find the answer online... Thank you sincerely in advance Best regards Victor --------Debug list -------- AT< WIFI CONNECTED AT< WIFI GOT IP AT< AT= OK AT> AT+CIFSR AT< AT< AT+CIFSR AT< +CIFSR:APIP,"192.168.4.1" AT< +CIFSR:APMAC,"da:bf:c0:0d:c5:d8" AT= +CIFSR:STAIP,"192.168.10.103" AT< AT< +CIFSR:STAMAC,"d8:bf:c0:0d:c5:d8" AT< AT= OK Network interface opened successfully. Connecting to host 192.168.10.165:8883 ... Hello [INFO][TLSx]: Connecting to 192.168.10.165:8883 AT> AT+CIPSTART=0,"TCP","192.168.10.165",8883 AT< AT< AT+CIPSTART=0,"TCP","192.168.10.165",8883 AT< 0,CONNECT AT< AT= OK [INFO][TLSx]: Connected. [INFO][TLSx]: Starting the TLS handshake... [DBG ][TLSx]: ssl_tls.c:6335: |2| => handshake [DBG ][TLSx]: ssl_cli.c:3279: |2| client state: 0 [DBG ][TLSx]: ssl_tls.c:2416: |2| => flush output [DBG ][TLSx]: ssl_tls.c:2428: |2| <= flush output [DBG ][TLSx]: ssl_cli.c:3279: |2| client state: 1 [DBG ][TLSx]: ssl_tls.c:2416: |2| => flush output [DBG ][TLSx]: ssl_tls.c:2428: |2| <= flush output [DBG ][TLSx]: ssl_cli.c:0717: |2| => write client hello [DBG ][TLSx]: ssl_cli.c:0754: |3| client hello, max version: [3:3] [DBG ][TLSx]: ssl_cli.c:0693: |3| client hello, current time: 14712 [DBG ][TLSx]: ssl_cli.c:0764: |3| dumping 'client hello, random bytes' (32 bytes) [DBG ][TLSx]: ssl_cli.c:0764: |3| 0000: 00 00 39 78 00 7d 4e 7a c5 43 7f d9 5b 0c cd 3f ..9x.}Nz.C..[..? [DBG ][TLSx]: ssl_cli.c:0764: |3| 0010: 01 a0 2f 60 8e a5 c1 54 1c 0e 58 6a a3 da c0 7a ../`...T..Xj...z [DBG ][TLSx]: ssl_cli.c:0817: |3| client hello, session id len.: 0 [DBG ][TLSx]: ssl_cli.c:0818: |3| dumping 'client hello, session id' (0 bytes) [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c02c [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c030 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c0ad [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c024 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c028 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c0af [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c02b [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c02f [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c0ac [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c023 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c027 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c0ae [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c038 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c037 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: 00a9 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c0a5 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: 00af [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c0a9 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: 00a8 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c0a4 [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: 00ae [DBG ][TLSx]: ssl_cli.c:0884: |3| client hello, add ciphersuite: c0a8 [DBG ][TLSx]: ssl_cli.c:0918: |3| client hello, got 23 ciphersuites [DBG ][TLSx]: ssl_cli.c:0949: |3| client hello, compress len.: 1 [DBG ][TLSx]: ssl_cli.c:0950: |3| client hello, compress alg.: 0 [DBG ][TLSx]: ssl_cli.c:0071: |3| client hello, adding server name extension: 192.168.10 .165 [DBG ][TLSx]: ssl_cli.c:0178: |3| client hello, adding signature_algorithms extension [DBG ][TLSx]: ssl_cli.c:0263: |3| client hello, adding supported_elliptic_curves extensi on [DBG ][TLSx]: ssl_cli.c:0326: |3| client hello, adding supported_point_formats extension [DBG ][TLSx]: ssl_cli.c:0507: |3| client hello, adding encrypt_then_mac extension [DBG ][TLSx]: ssl_cli.c:0541: |3| client hello, adding extended_master_secret extension [DBG ][TLSx]: ssl_cli.c:0575: |3| client hello, adding session ticket extension [DBG ][TLSx]: ssl_cli.c:1022: |3| client hello, total extension length: 73 [DBG ][TLSx]: ssl_tls.c:2701: |2| => write record [DBG ][TLSx]: ssl_tls.c:2835: |3| output record: msgtype = 22, version = [3:1], msglen = 164 [DBG ][TLSx]: ssl_tls.c:2840: |4| dumping 'output record sent to network' (169 bytes) [DBG ][TLSx]: ssl_tls.c:2840: |4| 0000: 16 03 01 00 a4 01 00 00 a0 03 03 00 00 39 78 00 .............9x. [DBG ][TLSx]: ssl_tls.c:2840: |4| 0010: 7d 4e 7a c5 43 7f d9 5b 0c cd 3f 01 a0 2f 60 8e }Nz.C..[..?../`. [DBG ][TLSx]: ssl_tls.c:2840: |4| 0020: a5 c1 54 1c 0e 58 6a a3 da c0 7a 00 00 2e c0 2c ..T..Xj...z...., [DBG ][TLSx]: ssl_tls.c:2840: |4| 0030: c0 30 c0 ad c0 24 c0 28 c0 af c0 2b c0 2f c0 ac .0...$.(...+./.. [DBG ][TLSx]: ssl_tls.c:2840: |4| 0040: c0 23 c0 27 c0 ae c0 38 c0 37 00 a9 c0 a5 00 af .#.'...8.7...... [DBG ][TLSx]: ssl_tls.c:2840: |4| 0050: c0 a9 00 a8 c0 a4 00 ae c0 a8 00 ff 01 00 00 49 ...............I [DBG ][TLSx]: ssl_tls.c:2840: |4| 0060: 00 00 00 13 00 11 00 00 0e 31 39 32 2e 31 36 38 .........192.168 [DBG ][TLSx]: ssl_tls.c:2840: |4| 0070: 2e 31 30 2e 31 36 35 00 0d 00 12 00 10 06 03 06 .10.165......... [DBG ][TLSx]: ssl_tls.c:2840: |4| 0080: 01 05 03 05 01 04 03 04 01 03 03 03 01 00 0a 00 ................ [DBG ][TLSx]: ssl_tls.c:2840: |4| 0090: 06 00 04 00 18 00 17 00 0b 00 02 01 00 00 16 00 ................ [DBG ][TLSx]: ssl_tls.c:2840: |4| 00a0: 00 00 17 00 00 00 23 00 00 ......#.. [DBG ][TLSx]: ssl_tls.c:2416: |2| => flush output [DBG ][TLSx]: ssl_tls.c:2434: |2| message length: 169, out_left: 169 AT> AT+CIPSEND=0,169 AT< AT< AT+CIPSEND=0,169 AT< AT< OK AT= > [DBG ][TLSx]: ssl_tls.c:2441: |2| ssl->f_send() returned 169 (-0xffffff57) [DBG ][TLSx]: ssl_tls.c:2460: |2| <= flush output [DBG ][TLSx]: ssl_tls.c:2850: |2| <= write record [DBG ][TLSx]: ssl_cli.c:1049: |2| <= write client hello [DBG ][TLSx]: ssl_cli.c:3279: |2| client state: 2 [DBG ][TLSx]: ssl_tls.c:2416: |2| => flush output [DBG ][TLSx]: ssl_tls.c:2428: |2| <= flush output [DBG ][TLSx]: ssl_cli.c:1410: |2| => parse server hello [DBG ][TLSx]: ssl_tls.c:3728: |2| => read record [DBG ][TLSx]: ssl_tls.c:2208: |2| => fetch input [DBG ][TLSx]: ssl_tls.c:2365: |2| in_left: 0, nb_want: 5 AT< AT< Recv 169 bytes AT< AT< SEND OK AT< AT! +IPD AT= ,0,7: AT< 0,CLOSED [DBG ][TLSx]: ssl_tls.c:2389: |2| in_left: 0, nb_want: 5 [DBG ][TLSx]: ssl_tls.c:6345: |2| <= handshake [DBG ][TLSx]: ssl_tls.c:6335: |2| => handshake [DBG ][TLSx]: ssl_cli.c:3279: |2| client state: 2 [DBG ][TLSx]: ssl_tls.c:2416: |2| => flush output [DBG ][TLSx]: ssl_tls.c:2428: |2| <= flush output [DBG ][TLSx]: ssl_cli.c:1410: |2| => parse server hello [DBG ][TLSx]: ssl_tls.c:3728: |2| => read record [DBG ][TLSx]: ssl_tls.c:2208: |2| => fetch input [DBG ][TLSx]: ssl_tls.c:2365: |2| in_left: 0, nb_want: 5 [DBG ][TLSx]: ssl_tls.c:2389: |2| in_left: 0, nb_want: 5 [DBG ][TLSx]: ssl_tls.c:2391: |2| ssl->f_recv(_timeout)() returned 5 (-0xfffffffb) [DBG ][TLSx]: ssl_tls.c:2403: |2| <= fetch input [DBG ][TLSx]: ssl_tls.c:3479: |4| dumping 'input record header' (5 bytes) [DBG ][TLSx]: ssl_tls.c:3479: |4| 0000: 15 03 03 00 02 ..... [DBG ][TLSx]: ssl_tls.c:3485: |3| input record: msgtype = 21, version = [3:3], msglen = 2 [DBG ][TLSx]: ssl_tls.c:2208: |2| => fetch input [DBG ][TLSx]: ssl_tls.c:2365: |2| in_left: 5, nb_want: 7 [DBG ][TLSx]: ssl_tls.c:2389: |2| in_left: 5, nb_want: 7 [DBG ][TLSx]: ssl_tls.c:2391: |2| ssl->f_recv(_timeout)() returned 2 (-0xfffffffe) [DBG ][TLSx]: ssl_tls.c:2403: |2| <= fetch input [DBG ][TLSx]: ssl_tls.c:3656: |4| dumping 'input record from network' (7 bytes) [DBG ][TLSx]: ssl_tls.c:3656: |4| 0000: 15 03 03 00 02 02 28 ......( [DBG ][TLSx]: ssl_tls.c:3960: |2| got an alert message, type: [2:40] [DBG ][TLSx]: ssl_tls.c:3968: |1| is a fatal alert message (msg 40) [DBG ][TLSx]: ssl_tls.c:3744: |1| mbedtls_ssl_handle_message_type() returned -30592 (-0x 7780) [DBG ][TLSx]: ssl_cli.c:1416: |1| mbedtls_ssl_read_record() returned -30592 (-0x7780) [DBG ][TLSx]: ssl_tls.c:6345: |2| <= handshake [ERR ][TLSx]: mbedtls_ssl_handshake() failed: -0x7780 (-30592): SSL AT> AT+CIPCLOSE=0 AT< AT+CIPCLOSE=0 AT< UNLINK AT< AT< ERROR AT> AT+CIPCLOSE=0 AT< AT+CIPCLOSE=0 AT< UNLINK AT< AT< ERROR ERROR: rc from TCP connect is -30592 [DBG ][TLSx]: ssl_tls.c:7055: |2| => free [DBG ][TLSx]: ssl_tls.c:7120: |2| <= free AT> AT+CWQAP AT< AT+CWQAP AT< AT= OK

2 years, 10 months

Parsing PKCS12 file

by Sunil Jain

Hello, We have requirements of parsing PKCS12 file in our project to import the certificate. I have seen the code and am not able to find the related API which can be used to parse the PKCS12 file. Do you have some sample example code which does this work? Thanks for your help. -- Regards, Sunil Jain

2 years, 10 months

2024

2023

2022

2021

2020

mbed-tls June 2021