Trusted-services August 2024

trusted-services@lists.trustedfirmware.org

3 participants
1 discussions

Questions Regarding PSA Firmware Update and Trusted Firmware Services

by Patryk

Hey, I have some issues understanding a few things related to https://www.trustedfirmware.org/, specifically: - https://trustedfirmware-a.readthedocs.io/en/latest/components/firmware-upda… PSA Firmware Update (PSA FWU) - https://trusted-services.readthedocs.io/en/latest/services/fwu/index.html Firmware Update Service I’ve asked on other mailing lists, but unfortunately, no one responded. I’m writing this in the context of ARMv8 architecture machines, where (roughly) we have the following stack running: - payload understandable by the vendor's bootROM - TF-A BL2 - TF-A BL31 as EL3 runtime services - OP-TEE as BL32 - u-boot as BL33 - Linux I will refer to BL31 and BL32 as firmware. In the PSA Firmware Update specification, the entire procedure is described, outlining how it should work, e.g., the update process is initiated by the Update Client running in REE (e.g., some process on Linux), and it describes how metadata should be handled, rollback, etc. Assuming that my storage is eMMC, where all these things are stored, divided into partitions (let's skip offsets and other details): - bootROM payload - bl2 - fip-a (required by bl2 with PSAFWUSUPPORT) - fip-b (required by bl2 with PSAFWUSUPPORT) - metadata-a (required by bl2 with PSAFWUSUPPORT) - metadata-b (required by bl2 with PSAFWUSUPPORT) - boot (e.g., with fitimage) - rootfs-a - rootfs-b - data As I was reviewing the specification, it seemed that the firmware update should be conducted in the secure world, which (in my opinion) would mean that, for example, fip-x and metadata-x are updated somehow from the secure world, let’s say by a TA running in OP-TEE. However: - OP-TEE doesn't have drivers for eMMC (simply put - for example, to store data securely, OP-TEE communicates with Linux to write data to eMMC). - When I started googling and asking around (e.g., on Reddit), people told me that it's not the case at all, and typically some process runs on Linux, like RAUC or SWUPDATE, and it just writes whatever is needed to fip-x and metadata-x - so the whole update takes place in the so-called REE. And now my question is - I assume that this specification and trusted services (particularly the FWU service) that I linked were designed for a reason - so my question is, what is the use case? Could this be more applicable to "small MCUs" rather than microprocessors (even though the specification I linked concerns Cortex-A)? Or is this used on servers? Perhaps the nature of embedded systems is such that we don't use it and just take RAUC or some other SWUPDATE and write what is needed, and the fact that the system is trustworthy is ensured by the chain-of-trust? Best regard Patryk

2 weeks, 3 days

2024

2023

2022

Trusted-services August 2024