Hi Chris,

Sorry for the trouble. May I know if the same configurations worked with the previous build system?

I checked a previous version of PSoC 64 specifics and it didn’t explicitly claim to support FF compliance tests. Could you please confirm it with Alamy?

Best regards,

Hu Ziji

From: TF-M <tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Christopher Brand via TF-M
Sent: Saturday, October 17, 2020 7:07 AM
To: tf-m@lists.trustedfirmware.org
Subject: [TF-M] Build failure

I’m experimenting with the new build system, and seeing an error.

Looking at docs/getting_started/tfm_build_instruction.rst, it mentions that TEST_PSA_API=IPC is a valid option (“Firmware Framework test suite”). When I try to configure for that build, though, I get an error:

$ cmake -S . -B build_GNUARM_Release '-GUnix Makefiles' -DTFM_PLATFORM=cypress/psoc64 -DCMAKE_TOOLCHAIN_FILE=toolchain_GNUARM.cmake -DCMAKE_BUILD_TYPE=Release -DTEST_PSA_API=IPC

CMake Error at build_GNUARM_Release/lib/ext/psa_arch_tests-src/api-tests/CMakeLists.txt:119 (message):

  [PSA] : Error: Unspported value for -DTARGET=, supported targets are :

  common;tgt_dev_apis_stdc;tgt_dev_apis_tfm_an521;tgt_dev_apis_tfm_an524;tgt_dev_apis_tfm_an539;tgt_dev_apis_tfm_musca_a;tgt_dev_apis_tfm_musca_b1;tgt_dev_apis_tfm_musca_s1;tgt_dev_apis_tfm_psoc64;tgt_ff_tfm_an521;tgt_ff_tfm_musca_a;tgt_ff_tfm_musca_b1

I see the same error with and without “-DTFM_ISOLATION_LEVEL=2”.

Chris Brand

Sr Prin Software Engr, MCD: WIRELESS

Cypress Semiconductor Corp.

An Infineon Technologies Company

#320-13700 International Place, Richmond, British Columbia V6V 2X8 Canada

www.infineon.com www.cypress.com

This message and any attachments may contain confidential information from Cypress or its subsidiaries. If it has been received in error, please advise the sender and immediately delete this message.