I just add the verbosity (I initially tough was the cmake verbosity..) to the test libraries.

This is the new output is somebody can help: https://pastebin.com/JNQ6TD0K

In the specific the failure is at :

‘’’

TEST: 403 | DESCRIPTION: Insufficient space check

Input id is 01030000

Input id is 02020000

[Info] Executing tests from non-secure

[Info] Executing PS tests

[Check 1] Overload storage space

Setting 0x00000200 bytes for UID 5

Setting 0x00000200 bytes for UID 6

Setting 0x00000200 bytes for UID 7

Setting 0x00000200 bytes for UID 8

Setting 0x00000200 bytes for UID 9

Setting 0x00000200 bytes for UID 10

Setting 0x00000200 bytes for UID 11

Setting 0x00000200 bytes for UID 12

Setting 0x00000200 bytes for UID 13

UID 13 set failed due to insufficient space

Remove all registered UIDs

Removing UID 5

Removing UID 6

Removing UID 7

Removing UID 8

Removing UID 9

Removing UID 10

Removing UID 11

Removing UID 12

[Check 2] Overload storage again to verify all previous UID removed

Setting 0x00000200 bytes for UID 5

Setting 0x00000200 bytes for UID 6

Setting 0x00000200 bytes for UID 7

Setting 0x00000200 bytes for UID 8

Setting 0x00000200 bytes for UID 9

[INF] Starting bootloader

[INF] Swap type: none

[INF] Bootloader chainload address offset: 0x80000

[INF] Jumping to the first image slot

[Sec Thread] Secure image initializing!

Booting TFM v1.2.0

[Crypto] MBEDTLS_TEST_NULL_ENTROPY is not suitable for production!

*** Booting Zephyr OS build v2.5.0-rc1-209-g30634334a811 ***

‘’’

Antonio Ken Iannillo