Compare the SAU/MPU (PPC?) regions and the polling CONTRO.nPRIV may show up the problem.

This looks like the current program does not have the permission to access the register, but the protection unit does not return an exception and just access as nop.

Is it work under AN521? If so I can have a try locally.

/Ken

From: TF-M <tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Thomas Törnblom via TF-M
Sent: Friday, September 24, 2021 5:56 PM
To: Ken Liu via TF-M <tf-m@lists.trustedfirmware.org>
Subject: [TF-M] Trouble building Musca S1 with IAR

I'm working on adding IARARM as a toolchain for the Musca S1 (and B1) and I'm running into an issue where the NS image can not properly access the UART.

The NS code loops trying to check the UART status @0x40102030, which holds the value 0x301, as can be seen with the debugger and also from the secure code, but when read by the NS code it returns 0, with no error.

As this code works when building with ARMCLANG and GNUARM, I assume there is some memory protection that gets incorrectly setup when I build with the IAR toolchain, but I'm struggling to find where this gets setup. I assume it is done in the secure image.

Any hints where i should be looking?

Thanks,
Thomas

--

Thomas T�rnblom, Product Engineer
IAR Systems AB
Box 23051, Strandbodgatan 1
SE-750 23 Uppsala, SWEDEN
Mobile: +46 76 180 17 80 Fax: +46 18 16 78 01
E-mail: thomas.tornblom@iar.com Website: www.iar.com
Twitter: www.twitter.com/iarsystems