Hi Chris,

Thanks a lot for reporting this.

It looks like the IRQ test case is enabled on NS side as long as the Platform service is enabled. The IRQ test service in SPE is controlled by `TFM_ENABLE_IRQ_TEST`, which, however, is neither explicitly configured in CMake nor exported for manual configuration. Therefore IRQ test service is not enabled by default.

Thus the IRQ test case will hang the execution and configuration of IRQ test in command line won’t take effect.

I’ve been looking for the solution. Just need some time to sort out the dependencies of those test control flags in the new build system. 😊

Sorry for any inconvenience.

Best regards,

Hu Ziji

From: TF-M <tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Christopher Brand via TF-M
Sent: Saturday, October 10, 2020 4:32 AM
To: tf-m@lists.trustedfirmware.org
Subject: [TF-M] Disabling IRQ test with new build system

Hi,

The IRQ test part of the CORE_TEST is all conditioned on TFM_ENABLE_IRQ_TEST, and docs/reference/services/core_test_services_integration_guide.rst states that “A platform can skip IRQ handling test by setting ``TFM_ENABLE_IRQ_TEST`` to ``OFF`` in its cmake configuration file.”, but doing so doesn’t seem to actually work. I tried a number of options to the cmake command (including -DTFM_ENABLE_IRQ_TES=OFF, -U TFM_ENABLE_IRQ_TEST), too, but I can’t figure out how to avoid that test.

Chris Brand

Sr Prin Software Engr, MCD: WIRELESS

Cypress Semiconductor Corp.

An Infineon Technologies Company

#320-13700 International Place, Richmond, British Columbia V6V 2X8 Canada

www.infineon.com www.cypress.com

This message and any attachments may contain confidential information from Cypress or its subsidiaries. If it has been received in error, please advise the sender and immediately delete this message.