Hi Kevin,

Thank you very much for your successfully efforts

and taking care for the TFM LPC55S69 upstream.

Andrej Butok

From: TF-M <tf-m-bounces@lists.trustedfirmware.org> On Behalf Of Kevin Townsend via TF-M
Sent: Wednesday, April 29, 2020 3:04 PM
To: Thomas Törnblom via TF-M <tf-m@lists.trustedfirmware.org>
Subject: [TF-M] LPC55S69 support merged into master

Hi,

Just a quick note that support for the LPC55S69 was just merged in, allowing you to use the relatively easy to source LPCXpresso55S69-EVK dev board: https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpcxpresso55s69-development-board:LPC55S69-EVK

Some notes on how to use this board with TF-M are visible here, including how to update the board to use the Segger J-Link firmware image: https://git.trustedfirmware.org/trusted-firmware-m.git/tree/platform/ext/target/nxp/lpcxpresso55s69/README.rst

Samples scripts for building and flashing (which assume the J-Link debug firmware is present) are available here:

- https://git.trustedfirmware.org/trusted-firmware-m.git/tree/platform/ext/target/nxp/lpcxpresso55s69/scripts/build.sh

- https://git.trustedfirmware.org/trusted-firmware-m.git/tree/platform/ext/target/nxp/lpcxpresso55s69/scripts/flash.sh

If you find any issues with the board support, you can comment on the LPC55S69 task here: https://developer.trustedfirmware.org/T706

Best regards,

Kevin Townsend