On Oct 7, 2020, at 12:12 PM, Alexei Fedorov <Alexei.Fedorov@arm.com> wrote:

Hi Ravi,

Have you tried to use RESET_TO_BL31 build option for your platform?

Regards.

Alexei

---

From: TF-A <tf-a-bounces@lists.trustedfirmware.org> on behalf of rkohli2000 gmail via TF-A <tf-a@lists.trustedfirmware.org>
Sent: 07 October 2020 17:01
To: tf-a@lists.trustedfirmware.org <tf-a@lists.trustedfirmware.org>
Subject: [TF-A] BL31 as bootloader

 

Hi,
I'm a new user and sorry for some basic TF-A questions. Any guidance is appreciated.

I'm am able boot the TF-A bl31.bin image itself on my i.MX8QM MEK platform without using u-boot.
I can use the imx-mkimage tool to create a flash or eMMC bootable image (flash.bin). Here, I can
specify this container image with both bl31.bin and a separate custom app at a give flash address.
This is without any security requirements or dependencies.

Can I use the T-FA bl31.bin image to act as a first stage bootloader (without u-boot) and then launch 
a "custom" bare metal app for Cortex-A53 (for example) on the i.MX8QM at the given (BL33) entry point 
0x80020000 address ? 

Thanks in advance.
Ravi
 


-- 
TF-A mailing list
TF-A@lists.trustedfirmware.org
https://lists.trustedfirmware.org/mailman/listinfo/tf-a