I'm new to TF-A and OP Tee.

While I am using qemu to start TF-A, I got BL1 detected and failed to load BL2, due to BL2 size out of bounds.

I changed TF-A BL1 source code to show more information:

diff --git a/common/bl_common.c b/common/bl_common.c
index 2fcb5385d9..a6239a5257 100644
--- a/common/bl_common.c
+++ b/common/bl_common.c

@@ -110,7 +111,7 @@ static int load_image(unsigned int image_id, image_info_t *image_data)

/* Check that the image size to load is within limit */
if (image_size > image_data->image_max_size) {
- WARN("Image id=%u size out of bounds\n", image_id);
+ WARN("Image id=%u size(%lu, %u) out of bounds\n", image_id, image_size, image_data->image_max_size);
io_result = -EFBIG;
goto exit;
}

the log shows:

NOTICE: Booting Trusted Firmware
NOTICE: BL1: v2.3():v2.3-dirty
NOTICE: BL1: Built : 15:56:43, Apr 20 2020
INFO: BL1: RAM 0xe04e000 - 0xe056000
VERBOSE: BL1: cortex_a57: CPU workaround for 806969 was not applied
WARNING: BL1: cortex_a57: CPU workaround for 813419 was missing!
VERBOSE: BL1: cortex_a57: CPU workaround for 813420 was not applied
VERBOSE: BL1: cortex_a57: CPU workaround for 814670 was not applied
WARNING: BL1: cortex_a57: CPU workaround for 817169 was missing!
INFO: BL1: cortex_a57: CPU workaround for disable_ldnp_overread was applied
WARNING: BL1: cortex_a57: CPU workaround for 826974 was missing!
WARNING: BL1: cortex_a57: CPU workaround for 826977 was missing!
WARNING: BL1: cortex_a57: CPU workaround for 828024 was missing!
WARNING: BL1: cortex_a57: CPU workaround for 829520 was missing!
WARNING: BL1: cortex_a57: CPU workaround for 833471 was missing!
WARNING: BL1: cortex_a57: CPU workaround for 859972 was missing!
INFO: BL1: cortex_a57: CPU workaround for cve_2017_5715 was applied
INFO: BL1: cortex_a57: CPU workaround for cve_2018_3639 was applied
INFO: BL1: Loading BL2
VERBOSE: Using Memmap
WARNING: Firmware Image Package header check failed.
VERBOSE: Trying alternative IO
VERBOSE: Using Semi-hosting IO
INFO: Loading image id=1 at address 0xe01b000
WARNING: Image id=1 size(4294967295, 151552) out of bounds
ERROR: Failed to load BL2 firmware.

I'm using yocto (dunfell) + meta-arm to build / test TF-A + OP TEE under qemuarm64.

meta-arm rev: c4f04f3fb66f8f4365b08b553af8206372e90a63

variables defined inside conf/local.conf ( for test )

23 MACHINE ?= "qemuarm64"
25
26 INSANE_SKIP_pn-optee-examples = "ldflags"
27 COMPATIBLE_MACHINE_pn-optee-examples = "qemuarm64"
28 COMPATIBLE_MACHINE_pn-optee-os = "qemuarm64"
29 COMPATIBLE_MACHINE_pn-optee-client = "qemuarm64"
30 COMPATIBLE_MACHINE_pn-trusted-firmware-a = "qemuarm64"
31
32 TFA_PLATFORM = "qemu"
33 TFA_UBOOT = "1"
34 TFA_DEBUG = "1"
35 TFA_SPD = "opteed"
36 TFA_BUILD_TARGET = "bl1 bl2 bl31"
37
38 OPTEEMACHINE:qemuarm64 = "vexpress-qemu_armv8a"
39 OPTEEOUTPUTMACHINE:qemuarm64 = "vexpress"
40
41 UBOOT_MACHINE_qemuarm64 = "qemu_arm64_defconfig"

I started qemu using following command line:

BIOS=tmp/deploy/images/qemuarm64/bl1.bin \
KERNEL=tmp/deploy/images/qemuarm64/Image-qemuarm64.bin \
runqemu mydefined-image-core-image-dev-optee nographic -d \
qemuparams=" \
-machine secure=on \
-m 4096 \
-d unimp -semihosting -semihosting-config enable=on,target=native \
"

Thanks