Zynq MP First Stage Boot Loader
Release 2024.1   Jul  8 2025  -  08:53:19
MultiBootOffset: 0x0
Reset Mode	:	System Reset
Platform: Silicon (4.0), Cluster ID 0x80000000
Running on A53-0 (64-bit) Processor, Device Name: XCZU15EG
Initializing DDR ECC
Address 0x000000000, Length 0x07FF00000, ECC initialized
Address 0x800000000, Length 0x080000000, ECC initialized
Processor Initialization Done
================= In Stage 2 ============
SD1 with level shifter Boot Mode
SD: rc= 0
File name is 1:/BOOT.BIN
Multiboot Reg : 0x0
Image Header Table Offset 0x8C0
*****Image Header Table Details********
Boot Gen Ver: 0x1020000
No of Partitions: 0x3
Partition Header Address: 0x440
Partition Present Device: 0x0
Initialization Success
======= In Stage 3, Partition No:1 =======
UnEncrypted data Length: 0x3D47
Data word offset: 0x3D47
Total Data word length: 0x3D47
Destination Load Address: 0x0
Execution Address: 0x0
Data word offset: 0x10CD0
Partition Attributes: 0x117
Partition 1 Load Success
======= In Stage 3, Partition No:2 =======
UnEncrypted data Length: 0x56C64
Data word offset: 0x56C64
Total Data word length: 0x56C64
Destination Load Address: 0x10000000
Execution Address: 0x0
Data word offset: 0x14A20
Partition Attributes: 0x114
Partition 2 Load Success
All Partitions Loaded
================= In Stage 4 ============
PM Init Success
Protection configuration applied
Running Cpu Handoff address: 0x0, Exec State: 0
Exit from FSBL
 call: 0x%x
BL31: Early console setup
 call: 0x%x
Successfully initialized runtime console
ASSERT: lib/xlat_tables_v2/xlat_tables_core.c:788
BACKTRACE: START: assert
0: F_FUNCTION: 0x2880
1: F_FUNCTION: 0x4ca0
2: F_FUNCTION: 0x2628
3: F_FUNCTION: 0x36d4
4: F_FUNCTION: 0x108
5: F_FUNCTION: 0xfffcd8e8
BACKTRACE: END: assert