Hello Mathieu,
On 2/5/24 10:13, Arnaud POULIQUEN wrote:
On 2/2/24 20:53, Mathieu Poirier wrote:
On Thu, Feb 01, 2024 at 07:33:35PM +0100, Arnaud POULIQUEN wrote:
On 2/1/24 17:02, Mathieu Poirier wrote:
On Thu, Feb 01, 2024 at 04:06:37PM +0100, Arnaud POULIQUEN wrote:
hello Mathieu,
On 1/31/24 19:52, Mathieu Poirier wrote:
On Tue, Jan 30, 2024 at 10:13:48AM +0100, Arnaud POULIQUEN wrote: > > > On 1/26/24 18:11, Mathieu Poirier wrote: >> On Thu, Jan 18, 2024 at 11:04:33AM +0100, Arnaud Pouliquen wrote: >>> The new TEE remoteproc device is used to manage remote firmware in a >>> secure, trusted context. The 'st,stm32mp1-m4-tee' compatibility is >>> introduced to delegate the loading of the firmware to the trusted >>> execution context. In such cases, the firmware should be signed and >>> adhere to the image format defined by the TEE. >>> >>> Signed-off-by: Arnaud Pouliquen arnaud.pouliquen@foss.st.com >>> --- >>> V1 to V2 update: >>> - remove the select "TEE_REMOTEPROC" in STM32_RPROC config as detected by >>> the kernel test robot: >>> WARNING: unmet direct dependencies detected for TEE_REMOTEPROC >>> Depends on [n]: REMOTEPROC [=y] && OPTEE [=n] >>> Selected by [y]: >>> - STM32_RPROC [=y] && (ARCH_STM32 || COMPILE_TEST [=y]) && REMOTEPROC [=y] >>> - Fix initialized trproc variable in stm32_rproc_probe >>> --- >>> drivers/remoteproc/stm32_rproc.c | 149 +++++++++++++++++++++++++++++-- >>> 1 file changed, 144 insertions(+), 5 deletions(-) >>> >>> diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c >>> index fcc0001e2657..cf6a21bac945 100644 >>> --- a/drivers/remoteproc/stm32_rproc.c >>> +++ b/drivers/remoteproc/stm32_rproc.c >>> @@ -20,6 +20,7 @@ >>> #include <linux/remoteproc.h> >>> #include <linux/reset.h> >>> #include <linux/slab.h> >>> +#include <linux/tee_remoteproc.h> >>> #include <linux/workqueue.h> >>> >>> #include "remoteproc_internal.h" >>> @@ -49,6 +50,9 @@ >>> #define M4_STATE_STANDBY 4 >>> #define M4_STATE_CRASH 5 >>> >>> +/* Remote processor unique identifier aligned with the Trusted Execution Environment definitions */ >>> +#define STM32_MP1_M4_PROC_ID 0 >>> + >>> struct stm32_syscon { >>> struct regmap *map; >>> u32 reg; >>> @@ -90,6 +94,8 @@ struct stm32_rproc { >>> struct stm32_mbox mb[MBOX_NB_MBX]; >>> struct workqueue_struct *workqueue; >>> bool hold_boot_smc; >>> + bool fw_loaded; >>> + struct tee_rproc *trproc; >>> void __iomem *rsc_va; >>> }; >>> >>> @@ -257,6 +263,91 @@ static int stm32_rproc_release(struct rproc *rproc) >>> return err; >>> } >>> >>> +static int stm32_rproc_tee_elf_sanity_check(struct rproc *rproc, >>> + const struct firmware *fw) >>> +{ >>> + struct stm32_rproc *ddata = rproc->priv; >>> + unsigned int ret = 0; >>> + >>> + if (rproc->state == RPROC_DETACHED) >>> + return 0; >>> + >>> + ret = tee_rproc_load_fw(ddata->trproc, fw); >>> + if (!ret) >>> + ddata->fw_loaded = true; >>> + >>> + return ret; >>> +} >>> + >>> +static int stm32_rproc_tee_elf_load(struct rproc *rproc, >>> + const struct firmware *fw) >>> +{ >>> + struct stm32_rproc *ddata = rproc->priv; >>> + unsigned int ret; >>> + >>> + /* >>> + * This function can be called by remote proc for recovery >>> + * without the sanity check. In this case we need to load the firmware >>> + * else nothing done here as the firmware has been preloaded for the >>> + * sanity check to be able to parse it for the resource table. >>> + */ >> >> This comment is very confusing - please consider refactoring. >> >>> + if (ddata->fw_loaded) >>> + return 0; >>> + >> >> I'm not sure about keeping a flag to indicate the status of the loaded firmware. >> It is not done for the non-secure method, I don't see why it would be needed for >> the secure one. >> > > The difference is on the sanity check. > - in rproc_elf_sanity_check we parse the elf file to verify that it is > valid. > - in stm32_rproc_tee_elf_sanity_check we have to do the same, that means to > authenticate it. the authentication is done during the load. > > So this flag is used to avoid to reload it twice time. > refactoring the comment should help to understand this flag > > > An alternative would be to bypass the sanity check. But this lead to same > limitation. > Before loading the firmware in remoteproc_core, we call rproc_parse_fw() that is > used to get the resource table address. To get it from tee we need to > authenticate the firmware so load it... >
I spent a long time thinking about this patchset. Looking at the code as it is now, request_firmware() in rproc_boot() is called even when the TEE is responsible for loading the firmware. There should be some conditional code that calls either request_firmware() or tee_rproc_load_fw(). The latter should also be renamed to tee_rproc_request_firmware() to avoid confusion.
The request_firmware() call is needed in both cases to get the image from the filesystem. The tee_rproc_load_fw() gets, as input, the struct firmware provided by request_firmware().
The cover letter clearly state the secure side is responsible for loading the firmware image but here you're telling me it has to be loaded twice. This is very confusing.
Concerning the call of request_firmware()
By "both cases" I would say that the call of request_firmware() is needed in both modes:
- the ELF firmware is parsed and loaded by linux (legacy)
- the binary firmware is parsed and loaded by OP-TEE.
The Op-TEE is not able to get the firmware image from the file system.
Concerning the call of tee_rproc_load_fw twice time
There are 2 use cases:
First boot of the remote processor:
- The Linux rproc gets the binary firmware image from the file system by calling request_firmware(). A copy is stored in memory.
Right. And I think tee_rproc_load_fw() should be called right after request_firmware() if rproc::tee_rproc_interface is valid. At that point the TEE app may or may not do the firmware authentication, that is application specific.
FYI, I am close to completing V3 for my series. However, I am facing an issue with rproc_load_segments() that requires the implementation of ops->load on start. Therefore, just inserting a tee_rproc_load_fw() call is not possible.
Due to this constraint, I did not find a solution that matches your recommendations. Nevertheless, I will propose another solution in my V3, trying to take into account as many of your comments/requests as possible, including updating of the remoteproc_core.c to simplify the sequence.
Regards, Arnaud
- the linux performs a sanity check on the firmware calling rproc_fw_sanity_check()
=> from OP-TEE point of view this means to autenticate the firmware => let consider in this exemple that we bypass this step (ops->sanity_check = NULL)
Ok
3) the linux rproc call rproc_parse_fw() to get the resource table => From OP-TEE point of view the resource table is available only when the firmware is loaded
Right, and it should have been loaded already. If it is not then the TEE should return an error.
=> We need to call tee_rproc_load_fw() to be able then to get the address of the resource table.
See my comment above - at this point the TEE should already have the firmware. As such the only thing left is to get the address of the resource table, which you already do in rproc_tee_get_rsc_table(). The upper part of that function should be spun off in a new static function to deal with the TEE API, something like _rproc_tee_get_rsc_table(). The new function should also be called in tee_rproc_get_loaded_rsc_table() rather than keeping a cache value in trproc->rsc_va.
- The Linux rproc calls rproc_handle_resources() to parse the resource table.
- The linux rproc calls rproc_start()
- load the firrmware calling rproc_load_segments() => we don't want to call tee_rproc_load_fw() it a second time
And that is fine if the TEE app has already placed the program segments in memory.
start the firmware calling ops->start()
Reboot on crash recovery using rproc_boot_recovery()
- The Linux rproc gets the binary firmware image from the file system by calling request_firmware(). A copy is stored in memory.
- The linux rproc calls rproc_start()
- load the firrmware calling rproc_load_segments()
=> we have to call tee_rproc_load_fw() to reload the firmware
Loading the firmware in the TEE should be done right after request_firmware() has been called, the same way it is done in the boot path. If there isn't a need to reload the TEE firmware than the TEE application should ignore the request.
I need to prototype to verify this proposal. I will come back with a V3.
Thank you for the advice and review!
Regard, Arnaud
- start the firmware calling ops->start()
In first use case we have to load the firmware on rproc_parse_fw(), in second usecase on rproc_load_segments().
This is the point I have tried to solve with the ddata->fw_loaded variable.
I'm also confused as to why stm32_rproc_tee_elf_sanity_check() is calling tee_rproc_load_fw(). There should be one call to load the firmware and another to perform a sanity check on it. If the sanity check is done at load time by the secure world then ops::sanity_check() is NULL.
Sure, make sense to remove the sanity_check ops
Thanks, Arnaud
Most of what this patchset does makes sense, but some of it needs to be moved around.
Thanks, Mathieu
If we want to integrate in remoteproc_core the solution could probably have to create the equivalent of the rproc_fw_boot() to load the firmware with an external method. Here is an example based on a new rproc_ops ( not tested)
- static int rproc_fw_ext_boot(struct rproc *rproc, const struct firmware *fw)
- {
- struct device *dev = &rproc->dev;
- const char *name = rproc->firmware;
- int ret;
- dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
- /* ops to load and start the remoteprocessor */
- ret = rproc->ops->boot(rproc, fw);
- if (ret)
return ret;- /*
* if enabling an IOMMU isn't relevant for this rproc, this is* just a nop*/- ret = rproc_enable_iommu(rproc);
- if (ret) {
dev_err(dev, "can't enable iommu: %d\n", ret);return ret;- }
- /* Prepare rproc for firmware loading if needed */
- ret = rproc_prepare_device(rproc);
- if (ret) {
dev_err(dev, "can't prepare rproc %s: %d\n", rproc->name, ret);goto disable_iommu;- }
- ret = rproc_set_rsc_table(rproc);
- if (ret) {
dev_err(dev, "can't load resource table: %d\n", ret);goto unprepare_device;- }
- /* reset max_notifyid */
- rproc->max_notifyid = -1;
- /* reset handled vdev */
- rproc->nb_vdev = 0;
- /* handle fw resources which are required to boot rproc */
- ret = rproc_handle_resources(rproc, rproc_loading_handlers);
- if (ret) {
dev_err(dev, "Failed to process resources: %d\n", ret);goto clean_up_resources;- }
- /* Allocate carveout resources associated to rproc */
- ret = rproc_alloc_registered_carveouts(rproc);
- if (ret) {
dev_err(dev, "Failed to allocate associated carveouts: %d\n",ret);goto clean_up_resources;- }
- return 0;
- clean_up_resources:
- rproc_resource_cleanup(rproc);
- unprepare_rproc:
- /* release HW resources if needed */
- rproc_unprepare_device(rproc);
- disable_iommu:
- rproc_disable_iommu(rproc);
- return ret;
- }
int rproc_boot(struct rproc *rproc) { [...]
ret = rproc_fw_boot(rproc, firmware_p);
if(rproc->ops->boot)ret = rproc_fw_ext_boot(rproc, firmware_p);elseret = rproc_fw_boot(rproc, firmware_p);Another advantage of this solution is that it opens the framework to other formats. For instance it could be a way to support dtb format requested in [RFC] Passing device-tree to remoteproc [1].
[1] https://lore.kernel.org/linux-remoteproc/f67cd822-4e29-71f2-7c42-e11dbaa6cd8...
Thanks, Arnaud
I touched on that before but please rename rproc_tee_get_rsc_table() to rproc_tee_elf_load_rsc_table(). I also suggest to introduce a new function, rproc_tee_get_loaded_rsc_table() that would be called from rproc_tee_elf_load_rsc_table(). That way we don't need trproc->rsc_va.
I also think tee_rproc should be renamed to "rproc_tee_interface" and folded under struct rproc.
With the above most of the problems with the current implementation should naturally go away.
Thanks, Mathieu
> >>> + ret = tee_rproc_load_fw(ddata->trproc, fw); >>> + if (ret) >>> + return ret; >>> + ddata->fw_loaded = true; >>> + >>> + /* Update the resource table parameters. */ >>> + if (rproc_tee_get_rsc_table(ddata->trproc)) { >>> + /* No resource table: reset the related fields. */ >>> + rproc->cached_table = NULL; >>> + rproc->table_ptr = NULL; >>> + rproc->table_sz = 0; >>> + } >>> + >>> + return 0; >>> +} >>> + >>> +static struct resource_table * >>> +stm32_rproc_tee_elf_find_loaded_rsc_table(struct rproc *rproc, >>> + const struct firmware *fw) >>> +{ >>> + struct stm32_rproc *ddata = rproc->priv; >>> + >>> + return tee_rproc_get_loaded_rsc_table(ddata->trproc); >>> +} >>> + >>> +static int stm32_rproc_tee_start(struct rproc *rproc) >>> +{ >>> + struct stm32_rproc *ddata = rproc->priv; >>> + >>> + return tee_rproc_start(ddata->trproc); >>> +} >>> + >>> +static int stm32_rproc_tee_attach(struct rproc *rproc) >>> +{ >>> + /* Nothing to do, remote proc already started by the secured context. */ >>> + return 0; >>> +} >>> + >>> +static int stm32_rproc_tee_stop(struct rproc *rproc) >>> +{ >>> + struct stm32_rproc *ddata = rproc->priv; >>> + int err; >>> + >>> + stm32_rproc_request_shutdown(rproc); >>> + >>> + err = tee_rproc_stop(ddata->trproc); >>> + if (err) >>> + return err; >>> + >>> + ddata->fw_loaded = false; >>> + >>> + return stm32_rproc_release(rproc); >>> +} >>> + >>> static int stm32_rproc_prepare(struct rproc *rproc) >>> { >>> struct device *dev = rproc->dev.parent; >>> @@ -319,7 +410,14 @@ static int stm32_rproc_prepare(struct rproc *rproc) >>> >>> static int stm32_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) >>> { >>> - if (rproc_elf_load_rsc_table(rproc, fw)) >>> + struct stm32_rproc *ddata = rproc->priv; >>> + int ret; >>> + >>> + if (ddata->trproc) >>> + ret = rproc_tee_get_rsc_table(ddata->trproc); >>> + else >>> + ret = rproc_elf_load_rsc_table(rproc, fw); >>> + if (ret) >>> dev_warn(&rproc->dev, "no resource table found for this firmware\n"); >>> >>> return 0; >>> @@ -693,8 +791,22 @@ static const struct rproc_ops st_rproc_ops = { >>> .get_boot_addr = rproc_elf_get_boot_addr, >>> }; >>> >>> +static const struct rproc_ops st_rproc_tee_ops = { >>> + .prepare = stm32_rproc_prepare, >>> + .start = stm32_rproc_tee_start, >>> + .stop = stm32_rproc_tee_stop, >>> + .attach = stm32_rproc_tee_attach, >>> + .kick = stm32_rproc_kick, >>> + .parse_fw = stm32_rproc_parse_fw, >>> + .find_loaded_rsc_table = stm32_rproc_tee_elf_find_loaded_rsc_table, >>> + .get_loaded_rsc_table = stm32_rproc_get_loaded_rsc_table, >>> + .sanity_check = stm32_rproc_tee_elf_sanity_check, >>> + .load = stm32_rproc_tee_elf_load, >>> +}; >>> + >>> static const struct of_device_id stm32_rproc_match[] = { >>> - { .compatible = "st,stm32mp1-m4" }, >>> + {.compatible = "st,stm32mp1-m4",}, >>> + {.compatible = "st,stm32mp1-m4-tee",}, >>> {}, >>> }; >>> MODULE_DEVICE_TABLE(of, stm32_rproc_match); >>> @@ -853,6 +965,7 @@ static int stm32_rproc_probe(struct platform_device *pdev) >>> struct device *dev = &pdev->dev; >>> struct stm32_rproc *ddata; >>> struct device_node *np = dev->of_node; >>> + struct tee_rproc *trproc = NULL; >>> struct rproc *rproc; >>> unsigned int state; >>> int ret; >>> @@ -861,11 +974,31 @@ static int stm32_rproc_probe(struct platform_device *pdev) >>> if (ret) >>> return ret; >>> >>> - rproc = rproc_alloc(dev, np->name, &st_rproc_ops, NULL, sizeof(*ddata)); >>> - if (!rproc) >>> - return -ENOMEM; >>> + if (of_device_is_compatible(np, "st,stm32mp1-m4-tee")) { >>> + trproc = tee_rproc_register(dev, STM32_MP1_M4_PROC_ID); >>> + if (IS_ERR(trproc)) { >>> + dev_err_probe(dev, PTR_ERR(trproc), >>> + "signed firmware not supported by TEE\n"); >>> + return PTR_ERR(trproc); >>> + } >>> + /* >>> + * Delegate the firmware management to the secure context. >>> + * The firmware loaded has to be signed. >>> + */ >>> + dev_info(dev, "Support of signed firmware only\n"); >> >> Not sure what this adds. Please remove. > > This is used to inform the user that only a signed firmware can be loaded, not > an ELF file. > I have a patch in my pipe to provide the supported format in the debugfs. In a > first step, I can suppress this message and we can revisit the issue when I push > the debugfs proposal. > > Thanks, > Arnaud > >> >>> + } >>> + rproc = rproc_alloc(dev, np->name, >>> + trproc ? &st_rproc_tee_ops : &st_rproc_ops, >>> + NULL, sizeof(*ddata)); >>> + if (!rproc) { >>> + ret = -ENOMEM; >>> + goto free_tee; >>> + } >>> >>> ddata = rproc->priv; >>> + ddata->trproc = trproc; >>> + if (trproc) >>> + trproc->rproc = rproc; >>> >>> rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE); >>> >>> @@ -916,6 +1049,10 @@ static int stm32_rproc_probe(struct platform_device *pdev) >>> device_init_wakeup(dev, false); >>> } >>> rproc_free(rproc); >>> +free_tee: >>> + if (trproc) >>> + tee_rproc_unregister(trproc); >>> + >>> return ret; >>> } >>> >>> @@ -937,6 +1074,8 @@ static void stm32_rproc_remove(struct platform_device *pdev) >>> device_init_wakeup(dev, false); >>> } >>> rproc_free(rproc); >>> + if (ddata->trproc) >>> + tee_rproc_unregister(ddata->trproc); >>> } >>> >>> static int stm32_rproc_suspend(struct device *dev) >>> -- >>> 2.25.1 >>>
Linux-stm32 mailing list Linux-stm32@st-md-mailman.stormreply.com https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32